Commit a61bbcf2 ("[NET]: Store skb->timestamp as offset to a base
timestamp") introduces a neighbour control buffer and zeroes it out in
ndisc_rcv(), as ndisc_recv_ns() uses it.

Commit f2776ff0 ("[IPV6]: Fix address/interface handling in UDP and
DCCP, according to the scoping architecture.") introduces the usage of the
IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in
present-day __udp6_lib_err()).

Now, with commit b94f1c09 ("ipv6: Use icmpv6_notify() to propagate
redirect, instead of rt6_redirect()."), we call protocol error handlers
from ndisc_redirect_rcv(), after the control buffer is already stolen and
some parts are already zeroed out. This implies that inet6_iif() on this
path will always return zero.

This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as
we might actually need to match sockets for a given interface.

Instead of always claiming the control buffer in ndisc_rcv(), do that only
when needed.

Fixes: b94f1c09 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().")
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The cleanup path will put the target net when netnsid is set.  So we must
reset netnsid if the input is invalid.

Fixes: d7e38611 ("net/ipv4: Put target net when address dump fails due to bad attributes")
Fixes: 242afaa6 ("net/ipv6: Put target net when address dump fails due to bad attributes")
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SPI dependency does not apply to lan743x driver, and other
drivers in the group already state their dependence on SPI.
Signed-off-by: NBryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drivers using generic NAPI interface no longer need to include
<net/busy_poll.h>, since busy polling was moved to core networking
stack long ago.

See commit 79e7fff4 ("net: remove support for per driver
ndo_busy_poll()") for reference.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver got missed during the recent change of .features from a
u32 to a pointer to a Linux bitmap. Change the initialisation from 0
to PHY_10GBIT_FEATURES so removing the danger of a NULL pointer
dereference.

Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: NJose Abreu <jose.abreu@synopsys.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was reported that WoL from S5 is broken (WoL from S3 works) and the
analysis showed that during system shutdown the network interface was
brought down already when the actual kernel shutdown started.
Therefore netif_running() returned false and as a consequence the PHY
was suspended. Obviously WoL wasn't working then.
To fix this the original patch needs to be effectively reverted.
A side effect is that when normally bringing down the interface and
WoL is enabled the PHY will remain powered on (like it was before the
original patch).

Fixes: fe87bef0 ("r8169: don't check WoL when powering down PHY and interface is down")
Reported-by: NNeil MacLeod <neil@nmacleod.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function nix_update_mce_list() is called from
nix_update_bcast_mce_list(), and a spin lock is held
here, so we should use GFP_ATOMIC instead.

Fixes: 4b05528e ("octeontx2-af: Update bcast list upon NIXLF alloc/free")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Socket buffer is not re-created when headroom is 2 and tailroom is 1.
Signed-off-by: NTristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2018-10-24

This series contains fixes for the ice driver.

Anirudh fixes a namespace issue which was introduced with a previous
patch to remove ice_netpoll.  Fixed up the device ID define names to
align with the branding string names.  Use the capability count returned
by the firmware, instead of calculating the count.  Introduced driver
workarounds due to current firmware limitations.  Fixed the queue
mapping for a VF, which needs to be set in the config and scatter queue
modes.  Fixed the driver which is setup to handle link status events
(LSE), even though the firmware does not have this feature yet, so add
the ability to poll for link status changes while we wait for updated
firmware.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The intent of ip6_route_check_nh_onlink is to make sure the gateway
given for an onlink route is not actually on a connected route for
a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then
an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway
lookup hits the default route then it most likely will be a different
interface than the onlink route which is ok.

Update ip6_route_check_nh_onlink to disregard the device mismatch
if the gateway lookup hits the default route. Turns out the existing
onlink tests are passing because there is no default route or it is
an unreachable default, so update the onlink tests to have a default
route other than unreachable.

Fixes: fc1e64e1 ("net/ipv6: Add support for onlink flag")
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marco reported an error with hfsc:
root@Calimero:~# tc qdisc add dev eth0 root handle 1:0 hfsc default 1
Error: Attribute failed policy validation.

Apparently a few implementations pass TCA_OPTIONS as a binary instead
of nested attribute, so drop TCA_OPTIONS from the policy.

Fixes: 8b4c3cdd ("net: sched: Add policy validation for tc attributes")
Reported-by: NMarco Berizzi <pupilla@libero.it>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the physical link goes up or down, the driver is supposed to
receive a link status event (LSE). The driver currently has the code
to handle LSEs but there is no firmware support for this feature yet.
So this patch adds the ability for the driver to poll for link status
changes. The polling itself is done in ice_watchdog_subtask.

For namespace cleanliness, this patch also removes code that handles
LSE. This code will be reintroduced once the feature is officially
supported.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Allocate VF interrupts using VPINT_ALLOC_PCI. Multiple interrupts are
specified as a range from "first" to "last".

Also, according to the spec, the queue mapping for a VF needs to be set
in both contig and scatter queue modes. So make this change as well.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

ice_dev_onetime_setup contains a couple of driver workarounds for current
firmware limitations. These workarounds are expected to go away once
these limitations are fixed in the firmware.

On a firmware release that has these issues addressed, these workarounds
(while unnecessary) will not break anything.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the smatch warning,

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c:700
hclge_log_and_clear_ppp_error() error: uninitialized symbol
'hw_err_lst3'

Link: https://lkml.org/lkml/2018/10/23/430

Fixes: da2d072a ("net: hns3: Add enable and process hw errors from PPP")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a copy and paste bug where we copied the sizeof() from the chunk
before.  We're copying more data than intended but the destination is a
union so it doesn't cause memory corruption.

Fixes: ffb0abd7 ("octeontx2-af: NIX AQ instruction enqueue support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current handling of CHECKSUM_COMPLETE packets by the UDP stack is
incorrect for any packet that has an incorrect checksum value.

udp4/6_csum_init() will both make a call to
__skb_checksum_validate_complete() to initialize/validate the csum
field when receiving a CHECKSUM_COMPLETE packet. When this packet
fails validation, skb->csum will be overwritten with the pseudoheader
checksum so the packet can be fully validated by software, but the
skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way
the stack can later warn the user about their hardware spewing bad
checksums. Unfortunately, leaving the SKB in this state can cause
problems later on in the checksum calculation.

Since the the packet is still marked as CHECKSUM_COMPLETE,
udp_csum_pull_header() will SUBTRACT the checksum of the UDP header
from skb->csum instead of adding it, leaving us with a garbage value
in that field. Once we try to copy the packet to userspace in the
udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg()
to checksum the packet data and add it in the garbage skb->csum value
to perform our final validation check.

Since the value we're validating is not the proper checksum, it's possible
that the folded value could come out to 0, causing us not to drop the
packet. Instead, we believe that the packet was checksummed incorrectly
by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt
to warn the user with netdev_rx_csum_fault(skb->dev);

Unfortunately, since this is the UDP path, skb->dev has been overwritten
by skb->dev_scratch and is no longer a valid pointer, so we end up
reading invalid memory.

This patch addresses this problem in two ways:
	1) Do not use the dev pointer when calling netdev_rx_csum_fault()
	   from skb_copy_and_csum_datagram_msg(). Since this gets called
	   from the UDP path where skb->dev has been overwritten, we have
	   no way of knowing if the pointer is still valid. Also for the
	   sake of consistency with the other uses of
	   netdev_rx_csum_fault(), don't attempt to call it if the
	   packet was checksummed by software.

	2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init().
	   If we receive a packet that's CHECKSUM_COMPLETE that fails
	   verification (i.e. skb->csum_valid == 0), check who performed
	   the calculation. It's possible that the checksum was done in
	   software by the network stack earlier (such as Netfilter's
	   CONNTRACK module), and if that says the checksum is bad,
	   we can drop the packet immediately instead of waiting until
	   we try and copy it to userspace. Otherwise, we need to
	   mark the SKB as CHECKSUM_NONE, since the skb->csum field
	   no longer contains the full packet checksum after the
	   call to __skb_checksum_validate_complete().

Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing")
Fixes: c84d9490 ("udp: copy skb->truesize in the first cache line")
Cc: Sam Kumar <samanthakumar@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NSean Tranchetti <stranche@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Fixups for recent dump filtering changes

Li RongQing noted that tgt_net is leaked in ipv4 due to the recent change
to handle address dumps for a specific device. The report also applies to
ipv6 and other error paths. Patches 1 and 2 fix those leaks.

Patch 3 stops route dumps from erroring out when dumping across address
families and a table id is given. This is needed in preparation for
patch 4.

Patch 4 updates the rtnl_dump_all to handle a failure in one of the dumpit
functions. At the moment, if an address dump returns an error the dump all
loop breaks but the error is dropped. The result can be no data is returned
and no error either leaving the user wondering about the addresses.

Patches were tested with a modified iproute2 to add invalid data to the
dump request causing each specific failure path to be hit in addition
to positive testing that it works as it should when given valid data.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an address, route or netconf dump request is sent for AF_UNSPEC, then
rtnl_dump_all is used to do the dump across all address families. If one
of the dumpit functions fails (e.g., invalid attributes in the dump
request) then rtnl_dump_all needs to propagate that error so the user
gets an appropriate response instead of just getting no data.

Fixes: effe6792 ("net: Enable kernel side filtering of route dumps")
Fixes: 5fcd266a ("net/ipv4: Add support for dumping addresses for a specific device")
Fixes: 6371a71f ("net/ipv6: Add support for dumping addresses for a specific device")
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When doing a route dump across all address families, do not error out
if the table does not exist. This allows a route dump for AF_UNSPEC
with a table id that may only exist for some of the families.

Do return the table does not exist error if dumping routes for a
specific family and the table does not exist.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump
request, make sure all error paths call put_net.

Fixes: 6371a71f ("net/ipv6: Add support for dumping addresses for a specific device")
Fixes: ed6eff11 ("net/ipv6: Update inet6_dump_addr for strict data checking")
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump
request, make sure all error paths call put_net.

Fixes: 5fcd266a ("net/ipv4: Add support for dumping addresses for a specific device")
Fixes: c33078e3 ("net/ipv4: Update inet_dump_ifaddr for strict data checking")
Reported-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware now returns the capability count in the command buffer.
Use it.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Update to the current firmware major and minor version which are
1 and 3 respectively.

Also remove an empty comment line.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Basically remove references to C810 and use E810C (from the branding
string) instead.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

commit 158a08a6 ("ice: remove ndo_poll_controller") removed
ice_netpoll and introduced a namespace warning for ice_msix_clean_rings.
Fix the namespace warning by making ice_msix_clean_rings static.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Pull documentation updates from Jonathan Corbet:
 "This is a fairly typical cycle for documentation. There's some welcome
  readability improvements for the formatted output, some LICENSES
  updates including the addition of the ISC license, the removal of the
  unloved and unmaintained 00-INDEX files, the deprecated APIs document
  from Kees, more MM docs from Mike Rapoport, and the usual pile of typo
  fixes and corrections"

* tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits)
  docs: Fix typos in histogram.rst
  docs: Introduce deprecated APIs list
  kernel-doc: fix declaration type determination
  doc: fix a typo in adding-syscalls.rst
  docs/admin-guide: memory-hotplug: remove table of contents
  doc: printk-formats: Remove bogus kobject references for device nodes
  Documentation: preempt-locking: Use better example
  dm flakey: Document "error_writes" feature
  docs/completion.txt: Fix a couple of punctuation nits
  LICENSES: Add ISC license text
  LICENSES: Add note to CDDL-1.0 license that it should not be used
  docs/core-api: memory-hotplug: add some details about locking internals
  docs/core-api: rename memory-hotplug-notifier to memory-hotplug
  docs: improve readability for people with poorer eyesight
  yama: clarify ptrace_scope=2 in Yama documentation
  docs/vm: split memory hotplug notifier description to Documentation/core-api
  docs: move memory hotplug description into admin-guide/mm
  doc: Fix acronym "FEKEK" in ecryptfs
  docs: fix some broken documentation references
  iommu: Fix passthrough option documentation
  ...

Pull ext4 updates from Ted Ts'o:

 - further restructure ext4 documentation

 - fix up ext4's delayed allocation for bigalloc file systems

 - fix up some syzbot-detected races in EXT4_IOC_MOVE_EXT,
   EXT4_IOC_SWAP_BOOT, and ext4_remount

 - ... and a few other miscellaneous bugs and optimizations.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
  ext4: fix use-after-free race in ext4_remount()'s error path
  ext4: cache NULL when both default_acl and acl are NULL
  docs: promote the ext4 data structures book to top level
  docs: move ext4 administrative docs to admin-guide/
  jbd2: fix use after free in jbd2_log_do_checkpoint()
  ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR
  ext4: fix setattr project check in fssetxattr ioctl
  docs: make ext4 readme tables readable
  docs: fix ext4 documentation table formatting problems
  docs: generate a separate ext4 pdf file from the documentation
  ext4: convert fault handler to use vm_fault_t type
  ext4: initialize retries variable in ext4_da_write_inline_data_begin()
  ext4: fix EXT4_IOC_SWAP_BOOT
  ext4: fix build error when DX_DEBUG is defined
  ext4: fix argument checking in EXT4_IOC_MOVE_EXT
  ext4: fix reserved cluster accounting at page invalidation time
  ext4: adjust reserved cluster count when removing extents
  ext4: reduce reserved cluster count by number of allocated clusters
  ext4: fix reserved cluster accounting at delayed write time
  ext4: add new pending reservation mechanism
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've added 1) superblock checksum feature, 2)
  implemented new mount option which we can disable/enable checkpoint to
  provide atomic updates of entire filesystem, 3) refactored quota
  operations to enhance its consistency along with checkpoint, 4) fixed
  subtle IO hang conditions and roll-forward recovery flow to resurrect
  any fsync'ed inode metadata.

  Enhancements:
   - add checksum to keep superblock contents more safe
   - add checkpoint=disable/enable to support A/B update of entire filesystem
   - use plug for readahead IO in readdir
   - add more IO counts to avoid block layer hacks

  Bug fixes:
   - prevent data corruption issue for hardware encryption
   - fix IO hang issues when GC is heavily triggered
   - add missing up_read in __write_node_page
   - recover inode metadata during roll-forward recovery flow
   - fix null pointer dereference issue in wrongly configured discard map

  There are some more sanity checks and minor bug fixes as well"

* tag 'f2fs-for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (62 commits)
  f2fs: fix to keep project quota consistent
  f2fs: guarantee journalled quota data by checkpoint
  f2fs: cleanup dirty pages if recover failed
  f2fs: fix data corruption issue with hardware encryption
  f2fs: fix to recover inode->i_flags of inode block during POR
  f2fs: spread f2fs_set_inode_flags()
  f2fs: fix to spread clear_cold_data()
  Revert "f2fs: fix to clear PG_checked flag in set_page_dirty()"
  f2fs: account read IOs and use IO counts for is_idle
  f2fs: fix to account IO correctly for cgroup writeback
  f2fs: fix to account IO correctly
  f2fs: remove request_list check in is_idle()
  f2fs: allow to mount, if quota is failed
  f2fs: update REQ_TIME in f2fs_cross_rename()
  f2fs: do not update REQ_TIME in case of error conditions
  f2fs: remove unneeded disable_nat_bits()
  f2fs: remove unused sbi->trigger_ssr_threshold
  f2fs: shrink sbi->sb_lock coverage in set_file_temperature()
  f2fs: use rb_*_cached friends
  f2fs: fix to recover cold bit of inode block during POR
  ...

Pul xfs updates from Dave Chinner:
 "There's not a huge amount of change in this cycle - Darrick has been
  out of action for a couple of months (hence me sending the last few
  pull requests), so we decided a quiet cycle mainly focussed on bug
  fixes was a good idea. Darrick will take the helm again at the end of
  this merge window.

  FYI, I may be sending another update later in the cycle - there's a
  pending rework of the clone/dedupe_file_range code that fixes numerous
  bugs that is spread amongst the VFS, XFS and ocfs2 code. It has been
  reviewed and tested, Al and I just need to work out the details of the
  merge, so it may come from him rather than me.

  Summary:

   - only support filesystems with unwritten extents

   - add definition for statfs XFS magic number

   - remove unused parameters around reflink code

   - more debug for dangling delalloc extents

   - cancel COW extents on extent swap targets

   - fix quota stats output and clean up the code

   - refactor some of the attribute code in preparation for parent
     pointers

   - fix several buffer handling bugs"

* tag 'xfs-4.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (21 commits)
  xfs: cancel COW blocks before swapext
  xfs: clear ail delwri queued bufs on unmount of shutdown fs
  xfs: use offsetof() in place of offset macros for __xfsstats
  xfs: Fix xqmstats offsets in /proc/fs/xfs/xqmstat
  xfs: fix use-after-free race in xfs_buf_rele
  xfs: Add attibute remove and helper functions
  xfs: Add attibute set and helper functions
  xfs: Add helper function xfs_attr_try_sf_addname
  xfs: Move fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h
  xfs: issue log message on user force shutdown
  xfs: fix buffer state management in xrep_findroot_block
  xfs: always assign buffer verifiers when one is provided
  xfs: xrep_findroot_block should reject root blocks with siblings
  xfs: add a define for statfs magic to uapi
  xfs: print dangling delalloc extents
  xfs: fix fork selection in xfs_find_trim_cow_extent
  xfs: remove the unused trimmed argument from xfs_reflink_trim_around_shared
  xfs: remove the unused shared argument to xfs_reflink_reserve_cow
  xfs: handle zeroing in xfs_file_iomap_begin_delay
  xfs: remove suport for filesystems without unwritten extent flag
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got 18 patches for this merge window, none of which are very
  major:

   - clean up the gfs2 block allocator to prepare for future performance
     enhancements (Andreas Gruenbacher)

   - fix a use-after-free problem (Andy Price)

   - patches that fix gfs2's broken rgrplvb mount option (me)

   - cleanup patches and error message improvements (me)

   - enable getlabel support (Steve Whitehouse and Abhi Das)

   - flush the glock delete workqueue at exit (Tim Smith)"

* tag 'gfs2-4.20.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix minor typo: couln't versus couldn't.
  gfs2: write revokes should traverse sd_ail1_list in reverse
  gfs2: Pass resource group to rgblk_free
  gfs2: Remove unnecessary gfs2_rlist_alloc parameter
  gfs2: Fix marking bitmaps non-full
  gfs2: Fix some minor typos
  gfs2: Rename bitmap.bi_{len => bytes}
  gfs2: Remove unused RGRP_RSRV_MINBYTES definition
  gfs2: Move rs_{sizehint, rgd_gh} fields into the inode
  gfs2: Clean up out-of-bounds check in gfs2_rbm_from_block
  gfs2: Always check the result of gfs2_rbm_from_block
  gfs2: getlabel support
  GFS2: Flush the GFS2 delete workqueue before stopping the kernel threads
  gfs2: Don't leave s_fs_info pointing to freed memory in init_sbd
  gfs2: Use fs_* functions instead of pr_* function where we can
  gfs2: slow the deluge of io error messages
  gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated
  gfs2: improve debug information when lvb mismatches are found

Pull orangefs updates from Mike Marshall:
 "Fixes and a cleanup.

  Fixes:
   - fix superfluous service_operation return code check in
     orangefs_lookup
   - fix some error code paths that missed kmem_cache_free
   - don't let orangefs_iget return NULL
   - don't let orangefs_new_inode return NULL
   - cache NULL when both default_acl and acl are NULL

 Cleanup:
   - rate limit the client not running info message"

* tag 'for-linus-4.20-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: no need to check for service_operation returns > 0
  orangefs: some error code paths missed kmem_cache_free
  orangefs: don't let orangefs_iget return NULL.
  orangefs: don't let orangefs_new_inode return NULL
  orangefs: rate limit the client not running info message
  orangefs: cache NULL when both default_acl and acl are NULL

Pull vfs fixes from Al Viro.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  gfs2_meta: ->mount() can get NULL dev_name
  ecryptfs_rename(): verify that lower dentries are still OK after lock_rename()
  cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)

Pull jfs updates from David Kleikamp:
 "Just a few small fixes"

* tag 'jfs-for-4.20' of git://github.com/kleikamp/linux-shaggy:
  jfs: remove redundant dquot_initialize() in jfs_evict_inode()
  jfs: remove quota option from ignore list
  jfs: cache NULL when both default_acl and acl are NULL

Pull btrfs updates from David Sterba:
 "This is the first batch with fixes and some nice performance
  improvements.

  Preliminary results show eg. more files/sec in fsmark, better perf on
  multi-threaded workloads (filebench, dbench), fewer context switches
  and overall better memory allocation characteristics (multiple
  benchmarks).

  Apart from general performance, there's an improvement for qgroups +
  balance workload that's been troubling our users.

  Note for stable: there are 20+ patches tagged for stable, out of 90.
  Not all of them apply cleanly on all stable versions but the conflicts
  are mostly due to simple cleanups and resolving should be obvious. The
  fixes are otherwise independent.

  Performance improvements:

   - transition between blocking and spinning modes of path is gone,
     which originally resulted to more unnecessary wakeups and updates
     to the path locks, the effects are measurable and improve latency
     and scalability

   - qgroups: first batch of changes that should speedup balancing with
     qgroups on, skip quota accounting on unchanged subtrees, overall
     gain is about 30+% in runtime

   - use rb-tree with cached first node for several structures, small
     improvement to avoid pointer chasing

  Fixes:

   - trim
      - fix: some blockgroups could have been missed if their logical
        address was past the total filesystem size (ie. after a lot of
        balancing)
      - better error reporting, after processing blockgroups and whole
        device
      - fix: continue trimming block groups after an error is
        encountered
      - check for trim support of the device earlier and avoid some
        unnecessary work
      - less interaction with transaction commit that improves latency
        on slower storage (eg. image files over NFS)

   - fsync
      - fix warning when replaying log after fsync of a O_TMPFILE
      - fix wrong dentries after fsync of file that got its parent
        replaced

   - qgroups: fix rescan that might misc some dirty groups

   - don't clean dirty pages during buffered writes, this could lead to
     lost updates in some corner cases

   - some block groups could have been delayed in creation, if the
     allocation triggered another one

   - error handling improvements

  Cleanups:

   - removed unused struct members and variables

   - function return type cleanups

   - delayed refs code refactoring

   - protect against deadlock that could be caused by crafted image that
     tries to allocate from a tree that's locked already"

* tag 'for-4.20-part1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (93 commits)
  btrfs: switch return_bigger to bool in find_ref_head
  btrfs: remove fs_info from btrfs_should_throttle_delayed_refs
  btrfs: remove fs_info from btrfs_check_space_for_delayed_refs
  btrfs: delayed-ref: pass delayed_refs directly to btrfs_delayed_ref_lock
  btrfs: delayed-ref: pass delayed_refs directly to btrfs_select_ref_head
  btrfs: qgroup: move the qgroup->members check out from (!qgroup)'s else branch
  btrfs: relocation: Remove redundant tree level check
  btrfs: relocation: Cleanup while loop using rbtree_postorder_for_each_entry_safe
  btrfs: qgroup: Avoid calling qgroup functions if qgroup is not enabled
  Btrfs: fix wrong dentries after fsync of file that got its parent replaced
  Btrfs: fix warning when replaying log after fsync of a tmpfile
  btrfs: drop min_size from evict_refill_and_join
  btrfs: assert on non-empty delayed iputs
  btrfs: make sure we create all new block groups
  btrfs: reset max_extent_size on clear in a bitmap
  btrfs: protect space cache inode alloc with GFP_NOFS
  btrfs: release metadata before running delayed refs
  Btrfs: kill btrfs_clear_path_blocking
  btrfs: dev-replace: remove pointless assert in write unlock
  btrfs: dev-replace: move replace members out of fs_info
  ...

Pull tty ioctl updates from Al Viro:
 "This is the compat_ioctl work related to tty ioctls.

  Quite a bit of dead code taken out, all tty-related stuff gone from
  fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain,
  but all more or less generic tty-related ioctls should be covered
  (remaining issues are in things like driver-private ioctls in a pcmcia
  serial card driver not getting properly handled in 32bit processes on
  64bit host, etc)"

* 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits)
  kill TIOCSERGSTRUCT
  change semantics of ldisc ->compat_ioctl()
  kill TIOCSER[SG]WILD
  synclink_gt(): fix compat_ioctl()
  pty: fix compat ioctls
  compat_ioctl - kill keyboard ioctl handling
  gigaset: add ->compat_ioctl()
  vt_compat_ioctl(): clean up, use compat_ptr() properly
  gigaset: don't try to printk userland buffer contents
  dgnc: don't bother with (empty) stub for TCXONC
  dgnc: leave TIOC[GS]SOFTCAR to ldisc
  remove fallback to drivers for TIOCGICOUNT
  dgnc: break-related ioctls won't reach ->ioctl()
  kill the rest of tty COMPAT_IOCTL() entries
  dgnc: TIOCM... won't reach ->ioctl()
  isdn_tty: TCSBRK{,P} won't reach ->ioctl()
  kill capinc_tty_ioctl()
  take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()
  synclink: reduce pointless checks in ->ioctl()
  complete ->[sg]et_serial() switchover
  ...

Pull pstore updates from Kees Cook:
 "pstore improvements:

   - refactor init to happen as early as possible again (Joel Fernandes)

   - improve resource reservation names"

* tag 'pstore-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Clarify resource reservation labels
  pstore: Refactor compression initialization
  pstore: Allocate compression during late_initcall()
  pstore: Centralize init/exit routines

Pull security subsystem updates from James Morris:
 "In this patchset, there are a couple of minor updates, as well as some
  reworking of the LSM initialization code from Kees Cook (these prepare
  the way for ordered stackable LSMs, but are a valuable cleanup on
  their own)"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LSM: Don't ignore initialization failures
  LSM: Provide init debugging infrastructure
  LSM: Record LSM name in struct lsm_info
  LSM: Convert security_initcall() into DEFINE_LSM()
  vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
  LSM: Convert from initcall to struct lsm_info
  LSM: Remove initcall tracing
  LSM: Rename .security_initcall section to .lsm_info
  vmlinux.lds.h: Avoid copy/paste of security_init section
  LSM: Correctly announce start of LSM initialization
  security: fix LSM description location
  keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
  seccomp: remove unnecessary unlikely()
  security: tomoyo: Fix obsolete function
  security/capabilities: remove check for -EINVAL

Pull SELinux updates from Paul Moore:
 "Three SELinux patches for v4.20, all fall under the bug-fix or
  behave-better category, which is good. All three have pretty good
  descriptions too, which is even better"

* tag 'selinux-pr-20181022' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: Add __GFP_NOWARN to allocation at str_read()
  selinux: refactor mls_context_to_sid() and make it stricter
  selinux: fix mounting of cgroup2 under older policies

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo updates from Eric Biederman:
 "I have been slowly sorting out siginfo and this is the culmination of
  that work.

  The primary result is in several ways the signal infrastructure has
  been made less error prone. The code has been updated so that manually
  specifying SEND_SIG_FORCED is never necessary. The conversion to the
  new siginfo sending functions is now complete, which makes it
  difficult to send a signal without filling in the proper siginfo
  fields.

  At the tail end of the patchset comes the optimization of decreasing
  the size of struct siginfo in the kernel from 128 bytes to about 48
  bytes on 64bit. The fundamental observation that enables this is by
  definition none of the known ways to use struct siginfo uses the extra
  bytes.

  This comes at the cost of a small user space observable difference.
  For the rare case of siginfo being injected into the kernel only what
  can be copied into kernel_siginfo is delivered to the destination, the
  rest of the bytes are set to 0. For cases where the signal and the
  si_code are known this is safe, because we know those bytes are not
  used. For cases where the signal and si_code combination is unknown
  the bits that won't fit into struct kernel_siginfo are tested to
  verify they are zero, and the send fails if they are not.

  I made an extensive search through userspace code and I could not find
  anything that would break because of the above change. If it turns out
  I did break something it will take just the revert of a single change
  to restore kernel_siginfo to the same size as userspace siginfo.

  Testing did reveal dependencies on preferring the signo passed to
  sigqueueinfo over si->signo, so bit the bullet and added the
  complexity necessary to handle that case.

  Testing also revealed bad things can happen if a negative signal
  number is passed into the system calls. Something no sane application
  will do but something a malicious program or a fuzzer might do. So I
  have fixed the code that performs the bounds checks to ensure negative
  signal numbers are handled"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
  signal: Guard against negative signal numbers in copy_siginfo_from_user32
  signal: Guard against negative signal numbers in copy_siginfo_from_user
  signal: In sigqueueinfo prefer sig not si_signo
  signal: Use a smaller struct siginfo in the kernel
  signal: Distinguish between kernel_siginfo and siginfo
  signal: Introduce copy_siginfo_from_user and use it's return value
  signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
  signal: Fail sigqueueinfo if si_signo != sig
  signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
  signal/unicore32: Use force_sig_fault where appropriate
  signal/unicore32: Generate siginfo in ucs32_notify_die
  signal/unicore32: Use send_sig_fault where appropriate
  signal/arc: Use force_sig_fault where appropriate
  signal/arc: Push siginfo generation into unhandled_exception
  signal/ia64: Use force_sig_fault where appropriate
  signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
  signal/ia64: Use the generic force_sigsegv in setup_frame
  signal/arm/kvm: Use send_sig_mceerr
  signal/arm: Use send_sig_fault where appropriate
  signal/arm: Use force_sig_fault where appropriate
  ...