- 02 11月, 2011 24 次提交
-
-
由 Pawel Moll 提交于
This patch, based on virtio PCI driver, adds support for memory mapped (platform) virtio device. This should allow environments like qemu to use virtio-based block & network devices even on platforms without PCI support. One can define and register a platform device which resources will describe memory mapped control registers and "mailbox" interrupt. Such device can be also instantiated using the Device Tree node with compatible property equal "virtio,mmio". Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Michael S.Tsirkin <mst@redhat.com> Signed-off-by: NPawel Moll <pawel.moll@arm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Krishna Kumar 提交于
For the MSI but non-per_vq_vector case, the config/change vq also gets added to the list of vqs that need to process the MSI interrupt. This is not needed as config has it's own handler (vp_config_changed). In any case, vring_interrupt() finds nothing needs to be done on this vq. I tested this patch by testing the "Fallback:" and "Finally fall back" cases in vp_find_vqs(). Please review. Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Christian Borntraeger 提交于
On s390 I have seen some random "Warning: unable to open an initial console" boot failure. Turns out that tty_open fails, because the hvc_alloc was not yet done. In former times this could not happen, since the probe function automatically called hvc_alloc. With newer versions (multiport) some host<->guest interaction is required before hvc_alloc is called. This might be too late, especially if an initramfs is involved. Lets use a completion if we have multiport and an early console. [Amit: * Use NULL instead of 0 for pointer comparison * Rename 'port_added' to 'early_console_added' * Re-format, re-word commit message * Rebase patch on top of current queue] Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Acked-by: NChrstian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
This commit adds port-specific stats for the number of bytes received, sent and discarded. They're exposed via the debugfs interface. This data can be used to check for data loss bugs (or disprove such claims). It can also be used for accounting, if there's such a need. The stats remain valid throughout the lifetime of the port. Unplugging a port will reset the stats. The numbers are not reset across port opens/closes. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
discard_port_data() used virtqueue_get_buf() directly instead of using get_inbuf(). Fix this, so that we get accounting for all received bytes. This also simplifies the code a lot. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
'ret' is a misnomer in discard_port_data() since we don't return the value. Rename it to 'err'. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Instead of pulling in a buffer from the vq each time it's called, get_inbuf() now checks if the current active buffer, in port->inbuf is valid. If it is, just returns a pointer to it. This ends up simplifying a lot of code calling get_inbuf() since the check for port->inbuf being valid was done by all the callers. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
get_inbuf() returns void *. There's no reason to return void pointers instead of the correct struct port_buffer *. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Get ready to support suspend/resume by using the freezable calls so that blocking read/write syscalls are handled properly across suspend/resume. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
We don't allow port name changes dynamically for a port. So any requests by the host to change the name are ignored. Before this patch, if the hypervisor sent a port name while we had one set already, we would leak memory equivalent to the size of the old name. This scenario wasn't expected so far, but with the suspend-resume support, we'll send the VIRTIO_CONSOLE_PORT_READY message after restore, which can get us into this situation. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Convert spaces to tabs and fix indentation for an if statement split into multiple lines. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Wang Sheng-Hui 提交于
Based on the layout description in the comments, take account of the *_event_idx in functions vring_init and vring_size. Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Wang Sheng-Hui 提交于
The patch is against 3.0. Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Sasha Levin 提交于
This patch modifies virtio-net to use virtio_config_val() instead of a 'if(virtio_has_feature()) vdev->config->get()' construct to retrieve optional values from the config space. Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Sasha Levin 提交于
This patch adds virtio_config_val_len() which allows retrieving variable length data from the virtio config space only if a specific feature is on. Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Sasha Levin 提交于
This patch modifies virtio-console to use virtio_config_val() instead of a 'if(virtio_has_feature()) vdev->config->get()' construct to retrieve optional values from the config space. Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/i2c-3.2' of git://git.fluff.org/bjdooks/linux: (47 commits) i2c-s3c2410: Add device tree support i2c-s3c2410: Keep a copy of platform data and use it i2c-nomadik: cosmetic coding style corrections i2c-au1550: dev_pm_ops conversion i2c-au1550: increase timeout waiting for master done i2c-au1550: remove unused ack_timeout i2c-au1550: remove usage of volatile keyword i2c-tegra: __iomem annotation fix i2c-eg20t: Add initialize processing in case i2c-error occurs i2c-eg20t: Fix flag setting issue i2c-eg20t: add stop sequence in case wait-event timeout occurs i2c-eg20t: Separate error processing i2c-eg20t: Fix 10bit access issue i2c-eg20t: Modify returned value s32 to long i2c-eg20t: Fix bus-idle waiting issue i2c-designware: Fix PCI core warning on suspend/resume i2c-designware: Add runtime power management support i2c-designware: Add support for Designware core behind PCI devices. i2c-designware: Push all register reads/writes into the core code. i2c-designware: Support multiple cores using same ISR ...
-
git://opensource.wolfsonmicro.com/regulator由 Linus Torvalds 提交于
* 'for-linus' of git://opensource.wolfsonmicro.com/regulator: (22 commits) regulator: Constify constraints name regulator: Fix possible nullpointer dereference in regulator_enable() regulator: gpio-regulator add dependency on GENERIC_GPIO regulator: Add module.h include to gpio-regulator regulator: Add driver for gpio-controlled regulators regulator: remove duplicate REG_CTRL2 defines in tps65023 regulator: Clarify documentation for regulator-regulator supplies regulator: Fix some bitrot in the machine driver documentation regulator: tps65023: Added support for the similiar TPS65020 chip regulator: tps65023: Setting correct core regulator for tps65021 regulator: tps65023: Set missing bit for update core-voltage regulator: tps65023: Fixes i2c configuration issues regulator: Add debugfs file showing the supply map table regulator: tps6586x: add SMx slew rate setting regulator: tps65023: Fixes i2c configuration issues regulator: tps6507x: Remove num_voltages array regulator: max8952: removed unused mutex. regulator: fix regulator/consumer.h kernel-doc warning regulator: Ensure enough enable time for max8649 regulator: 88pm8607: Fix off-by-one value range checking in the case of no id is matched ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fix isochronous DMA synchronization firewire: ohci: work around selfID junk due to wrong gap count firewire: net: Use posted writes firewire: use clamp and min3 macros firewire: ohci: optimize TSB41BA3D detection firewire: ohci: TSB41BA3D support tweaks firewire: ohci: Add support for TSB41BA3D phy firewire: ohci: Move code from the bus reset tasklet into a workqueue firewire: sbp2: fold two functions into one firewire: sbp2: move some code to more sensible places firewire: sbp2: remove obsolete reference counting
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: make pstore write function return normal success/fail value pstore: change mutex locking to spin_locks pstore: defer inserting OOPS entries into pstore
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ...
-
由 Roland Dreier 提交于
Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', 'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next
-
git://github.com/herbertx/crypto由 Linus Torvalds 提交于
* git://github.com/herbertx/crypto: (48 commits) crypto: user - Depend on NET instead of selecting it crypto: user - Add dependency on NET crypto: talitos - handle descriptor not found in error path crypto: user - Initialise match in crypto_alg_match crypto: testmgr - add twofish tests crypto: testmgr - add blowfish test-vectors crypto: Make hifn_795x build depend on !ARCH_DMA_ADDR_T_64BIT crypto: twofish-x86_64-3way - fix ctr blocksize to 1 crypto: blowfish-x86_64 - fix ctr blocksize to 1 crypto: whirlpool - count rounds from 0 crypto: Add userspace report for compress type algorithms crypto: Add userspace report for cipher type algorithms crypto: Add userspace report for rng type algorithms crypto: Add userspace report for pcompress type algorithms crypto: Add userspace report for nivaead type algorithms crypto: Add userspace report for aead type algorithms crypto: Add userspace report for givcipher type algorithms crypto: Add userspace report for ablkcipher type algorithms crypto: Add userspace report for blkcipher type algorithms crypto: Add userspace report for ahash type algorithms ...
-
由 Eric W. Biederman 提交于
In sysfs_rename we need to remove the optimization of not calling sysfs_unlink_sibling and sysfs_link_sibling if the renamed parent directory is not changing. This optimization is no longer valid now that sysfs dirents are stored in an rbtree sorted by name. Move the assignment of s_ns before the call of sysfs_link_sibling. With no sysfs_dirent fields changing after the call of sysfs_link_sibling this allows sysfs_link_sibling to take any of the directory entries into account when it builds the rbtrees, and s_ns looks like a prime canidate to be used in the rbtree in the future. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Greg KH <gregkh@suse.de> Cc: David Miller <davem@davemloft.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 11月, 2011 16 次提交
-
-
由 Linus Torvalds 提交于
This is the fifth version of the patchset (with one tiny whitespace fix) to the Linux kernel to support the Qualcomm Hexagon architecture. Between now and the next pull requests, Richard Kuo should have his key signed, etc., and should be back on kernel.org. In the meantime, this got merged as a emailed patch-series. * Hexagon: (36 commits) Add extra arch overrides to asm-generic/checksum.h Hexagon: Add self to MAINTAINERS Hexagon: Add basic stacktrace functionality for Hexagon architecture. Hexagon: Add configuration and makefiles for the Hexagon architecture. Hexagon: Comet platform support Hexagon: kgdb support files Hexagon: Add page-fault support. Hexagon: Add page table header files & etc. Hexagon: Add ioremap support Hexagon: Provide DMA implementation Hexagon: Implement basic TLB management routines for Hexagon. Hexagon: Implement basic cache-flush support Hexagon: Provide basic implementation and/or stubs for I/O routines. Hexagon: Add user access functions Hexagon: Add locking types and functions Hexagon: Add SMP support Hexagon: Provide basic debugging and system trap support. Hexagon: Add ptrace support Hexagon: Add time and timer functions Hexagon: Add interrupts ...
-
由 Linas Vepstas 提交于
There are plausible reasons for architectures to provide their own versions of csum_partial_copy_nocheck and csum_tcpudp_magic. By protecting these, the architecture can still re-use the asm-generic checksum.h, instead of copying it. Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linas Vepstas 提交于
Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Mostly all stubs, as the TLB is managed by the hypervisor. Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Signed-off-by: NLinas Vepstas <linas@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-