By setting the FB of a CRTC to NULL, we are turning off the CRTC (and so
disable the unused encoders and connectors). As such we can simplify the
later tests by making sure the set->mode is NULL. Setting the
num_connectors to zero means that we do not need to loop over the unused
connectors.

All current usage appears correct, this only builds additional defense
into the routine.

References: https://bugzilla.kernel.org/show_bug.cgi?id=27722Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In drm_crtc_helper_set_config, we call drm_crtc_helper_set_mode which
may return early and do no operation if the crtc is to be disabled. In
this case we merrily swap to the new fb, discarding the old_fb believing
that it has been cleaned up. However, due to the early return, the
old_fb was not presented to the backend for correct reaping, and nor was
the new one - which is about to be reaped via the
drm_helper_disable_unused_functions(), leading to incorrect refcounting
of the pinned objects.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27722
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29230Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Based on a patch by Takashi Iwai.
Reported-by: NMatthias Hopf <mat@mshopf.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27272Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Upon resume, like after a cold boot, we need to forcibly probe the
analog connector and cannot rely on the hotplug status.

Based on a patch by Takashi Iwai.
Reported-by: NStefan Dirsch <sndirsch@suse.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=26952Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Call drm_mode_config_reset() after an invalidation event to restore any
cached state to unknown.
Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Iterate over the attached CRTCs, encoders and connectors and call the
supplied reset vfunc in order to reset any cached state back to unknown.
Useful after an invalidation event such as a GPU reset or resuming.
Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We were not pausing after detecting the response was pending and so did
not allow the hardware sufficient time to complete before aborting. This
lead to transient failures whilst probing SDVO devices.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30235Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

error_bo and pinned_bo could be used uninitialised if there were no
active buffers.

Caught by kmemcheck.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The opregion is a shared memory region between ACPI and the graphics
driver. As the ACPI mapping has been changed to cachable in commit
6d5bbf00, mapping the intel opregion
non-cachable now fails. As no bus-master hardware is involved in the
opregion, cachable map should do no harm.

Tested on a Fujitsu Lifebook P8010.
Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
[ickle: convert to acpi_os_ioremap for consistency]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Merge with Linus to resolve conflicting fixes for the reusing the stale
HEAD value during intel_ring_wait().

Conflicts:
	drivers/gpu/drm/i915/intel_ringbuffer.c

If the driver calls into the kernel to wait for a breadcrumb to pass,
but hasn't enabled interrupts, fallback to polling the breadcrumb value.
Reported-by: NChris Clayton <chris2553@googlemail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We only have sufficient information for accurate (sub-frame) timestamping
when the modesetting is under our control.
Reported-by: NChris Clayton <chris2553@googlemail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Reviewed-by: NMario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Reported-by: NChris Clayton <chris2553@googlemail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We can only utilize the stolen portion of the GTT if we are in sole
charge of the hardware. This is only true if using GEM and KMS,
otherwise VESA continues to access stolen memory.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  Remove MAYBE_BUILD_BUG_ON
  BUILD_BUG_ON: make it handle more cases

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix missing semicolons in MODULE macro usage
  param: add null statement to compiled-in module params
  module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
  module: show version information for built-in modules in sysfs

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: return -ENOMEM when memory allocation fails
  tpm: fix panic caused by "tpm: Autodetect itpm devices"
  TPM: Long default timeout fix
  trusted keys: Fix a memory leak in trusted_update().
  keys: add trusted and encrypted maintainers
  encrypted-keys: rename encrypted_defined files to encrypted
  trusted-keys: rename trusted_defined files to trusted

Now BUILD_BUG_ON() can handle optimizable constants, we don't need
MAYBE_BUILD_BUG_ON any more.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

BUILD_BUG_ON used to use the optimizer to do code elimination or fail
at link time; it was changed to first the size of a negative array (a
nicer compile time error), then (in
8c87df45) to a bitfield.

This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON();
as Jan points out in that commit, it didn't work as intended anyway.

bitfields: needs a literal constant at parse time, and can't be put under
	"if (__builtin_constant_p(x))" for example.
negative array: can handle anything, but if the compiler can't tell it's
	a constant, silently has no effect.
link time: breaks link if the compiler can't determine the value, but the
	linker output is not usually as informative as a compiler error.

If we use the negative-array-size method *and* the link time trick,
we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
branches, and maximal ability for the compiler to detect errors at
build time.

We also document it thoroughly.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Jan Beulich <JBeulich@novell.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>

You always needed them when you were a module, but the builtin versions
of the macros used to be more lenient.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add an unused struct declaration statement requiring a
terminating semicolon to the compile-in case to provoke an
error if __MODULE_INFO() is used without the terminating
semicolon. Previously MODULE_ALIAS("foo") (no semicolon)
compiled fine if MODULE was not selected.

Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show'
lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show'

Simplest to just not emit anything: if they've disabled SYSFS they probably
want the smallest kernel possible.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Currently only drivers that are built as modules have their versions
shown in /sys/module/<module_name>/version, but this information might
also be useful for built-in drivers as well. This especially important
for drivers that do not define any parameters - such drivers, if
built-in, are completely invisible from userspace.

This patch changes MODULE_VERSION() macro so that in case when we are
compiling built-in module, version information is stored in a separate
section. Kernel then uses this data to create 'version' sysfs attribute
in the same fashion it creates attributes for module parameters.
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Return -ENOMEM when memory allocation fails in cond_init_bool_indexes,
correctly propagating error code to caller.
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

commit 3f0d3d01 adds a check for
PNP device id to the common tpm_tis_init() function, which in some
cases (force=1) will be called without the device being a member of
a pnp_dev. Oopsing and panics ensue.

Move the test up to before the call to tpm_tis_init(), since it
just modifies a global variable anyway.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

If duration variable value is 0 at this point, it's because
chip->vendor.duration wasn't filled by tpm_get_timeouts() yet.
This patch sets then the lowest timeout just to give enough
time for tpm_get_timeouts() to further succeed.

This fix avoids long boot times in case another entity attempts
to send commands to the TPM when the TPM isn't accessible.
Signed-off-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

One failure path in security/keys/trusted.c::trusted_update() does
not free 'new_p' while the others do. This patch makes sure we also free
it in the remaining path (if datablob_parse() returns different from
Opt_update).
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NJames Morris <jmorris@namei.org>

Add myself and David Safford as maintainers for trusted/encrypted keys.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and
encrypted.h, respectively. Based on request from David Howells.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Rename trusted_defined.c and trusted_defined.h files to trusted.c and
trusted.h, respectively. Based on request from David Howells.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Starting with SandyBridge (though possible with earlier hacked BIOSes),
the BIOS may initialise the IGFX as secondary to a discrete GPU. Prior,
it would simply disable the integrated GPU. So we adjust our PCI class
mask to match any DISPLAY_CLASS device.

In such a configuration, the IGFX is not a primary VGA controller and
so should not take part in VGA arbitration, and the error return from
vga_client_register() is expected.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

There are I915_NUM_RINGS-1 inter-ring synchronisation counters, but we
were clearing I915_NUM_RINGS of them. Oops.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Tested-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Fix new fs/dcache.c kernel-doc warnings:

  Warning(fs/dcache.c:184): No description found for parameter 'dentry'
  Warning(fs/dcache.c:296): No description found for parameter 'parent'
  Warning(fs/dcache.c:1985): No description found for parameter 'dparent'
  Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc:	Alexander Viro <viro@zeniv.linux.org.uk>
Cc:	Nick Piggin <npiggin@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new rapidio kernel-doc warnings:

  Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev'
  Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix move of drivers/serial/ to drivers/tty/, where it broke
one of the docbook files:

  docproc: drivers/serial/serial_core.c: No such file or directory
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...

Fix up comments in the key management code.  No functional changes.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do a bit of a style clean up in the key management code.  No functional
changes.

Done using:

  perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
  perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
  sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c

To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix up CIFSSMBEcho for unaligned access
  cifs: fix unaligned accesses in cifsConvertToUCS
  cifs: clean up unaligned accesses in cifs_unicode.c
  cifs: fix unaligned access in check2ndT2 and coalesce_t2
  cifs: clean up unaligned accesses in validate_t2
  cifs: use get/put_unaligned functions to access ByteCount
  cifs: move time field in cifsInodeInfo
  cifs: TCP_Server_Info diet
  CIFS: Implement cifs_strict_readv (try #4)
  CIFS: Implement cifs_file_strict_mmap (try #2)
  CIFS: Implement cifs_strict_fsync
  CIFS: Make cifsFileInfo_put work with strict cache mode