[Why]
For DGPU Navi, the wm_table.nv_entries are used. These entires are not
populated for DCN301 Vangogh APU, but instead wm_table.entries are.

[How]
Use DCN21 Renoir style wm calculations.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Ported logic from dcn21 for reading in pipe fusing to dcn30.
Supported configurations are 1 and 6 pipes. Invalid fusing
will revert to 1 pipe being enabled.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NDillon Varone <dillon.varone@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY & HOW]
Using values provided by DF for latency may cause hangs in
multi display configurations. Revert change to previous value.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NHaonan Wang <Haonan.Wang2@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
pflip interrupt would not be enabled promptly if a pipe is disabled
and re-enabled, causing flip_done timeout error during DP
compliance tests

[How]
Enable pflip interrupt upon pipe enablement
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After fixing nested FPU contexts caused by 41401ac6 we're still seeing
complaints about spurious kernel_fpu_end(). As it turns out this was
already fixed for dcn20 in commit f41ed88c ("drm/amdgpu/display:
use GFP_ATOMIC in dcn20_validate_bandwidth_internal") but never moved
forward to dcn21.
Signed-off-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Commit 41401ac6 added FPU wrappers to dcn21_validate_bandwidth(),
which was correct. Unfortunately a nested function alredy contained
DC_FP_START()/DC_FP_END() calls, which results in nested FPU context
enter/exit and complaints by kernel_fpu_begin_mask().
This can be observed e.g. with 5.10.20, which backported 41401ac6
and now emits the following warning on boot:

WARNING: CPU: 6 PID: 858 at arch/x86/kernel/fpu/core.c:129 kernel_fpu_begin_mask+0xa5/0xc0
Call Trace:
 dcn21_calculate_wm+0x47/0xa90 [amdgpu]
 dcn21_validate_bandwidth_fp+0x15d/0x2b0 [amdgpu]
 dcn21_validate_bandwidth+0x29/0x40 [amdgpu]
 dc_validate_global_state+0x3c7/0x4c0 [amdgpu]

The warning is emitted due to the additional DC_FP_START/END calls in
patch_bounding_box(), which is inlined into dcn21_calculate_wm(),
its only caller. Removing the calls brings the code in line with
dcn20 and makes the warning disappear.

Fixes: 41401ac6 ("drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()")
Signed-off-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There seem devices that don't work with the aux channel backlight
control.  For allowing such users to test with the other backlight
control method, provide a new module option, aux_backlight, to specify
enabling or disabling the aux backport support explicitly.  As
default, the aux support is detected by the hardware capability.

v2: make the backlight option generic in case we add future
backlight types (Alex)

BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1180749
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1438Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to fetch it via aux.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It just spams the logs.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Avoid the extra wrapper function.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

the register offset isn't needed division by 4 to pass RREG32_PCIE()
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Currently if stream->signal is neither SIGNAL_TYPE_DISPLAY_PORT_MST or
SIGNAL_TYPE_DISPLAY_PORT then variable ret is uninitialized and this is
checked for > 0 at the end of the function.  Ret should be initialized,
I believe setting it to zero is a correct default.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: bd0c064c ("drm/amd/display: Add return code instead of boolean for future use")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It works fine and was only disabled because primary GPUs
don't enter runpm if there is a console bound to the fbdev due
to the kmap.  This will at least allow runpm on secondary cards.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Arcturus has a different register address from other SMU V11
ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Per discussions with PMFW team, the driver only needs to
notify the PMFW when the RLC is disabled.  The RLC FW will notify
the PMFW directly when it's enabled.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Making them an error confuses users and the errors are harmless
as not all asics support all profiles.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Navi12 0x7360/C7 SKU has no video support, so remove it.
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAsher.Song <Asher.Song@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The S0ix check only makes sense if the AMD PMC driver is
present.  We need to use the legacy S3 pathes when the
PMC driver is not present.
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
mutex_lock() was introduced in dm_disable_vblank(), which could
be called in an IRQ context. Waiting in IRQ would cause issues
like kernel lockup, etc.

[How]
Handle code that requires mutex lock on a different thread.

v2: squash in compilation fix without CONFIG_DRM_AMD_DC_DCN (Alex)
v3: squash in warning fix (Wei)
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

In the shutdown and poweroff opt on the s0i3 system we still need
un-gate the gfx clock gating and power gating before destory amdgpu device.

Fixes: 628c36d7 ("drm/amdgpu: update amdgpu device suspend/resume sequence for s0i3 support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1499Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
In some cases, this function is called when DIG BE is not
connected to DIG FE, in which case a value of zero isn't
invalid and assert should not be hit.

[How]
Remove assert and handle ENGINE_ID_UNKNOWN result in calling
function.
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

When run igt@kms_vrr in a device that uses DCN2.1 architecture, we
noticed multiple failures. Furthermore, when we tested a VRR demo, we
noticed a system hang where the mouse pointer still works, but the
entire system freezes; in this case, we don't see any dmesg warning or
failure messages kernel. This happens due to a lack of vupdate_no_lock
interrupt, making the userspace wait eternally to get the event back.
For fixing this issue, we need to add the vupdate_no_lock interrupt in
the interrupt list.
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This reverts commit 8866a67a.

Reason for revert: This breaks hotplug of HDMI on some systems,
resulting in a blank screen. Caused general hangs on boot/hotplugs.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1487
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1492
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211649Signed-off-by: NAnson Jacob <Anson.Jacob@amd.com>
Reviewed-by: NBhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Clang warns:

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:764:2: warning:
variable 'structure_size' is used uninitialized whenever switch default
is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:770:23: note:
uninitialized use occurs here
        memset(header, 0xFF, structure_size);
                             ^~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:753:25: note:
initialize the variable 'structure_size' to silence this warning
        uint16_t structure_size;
                               ^
                                = 0
1 warning generated.

Return in the default case, as the size of the header will not be known.

Fixes: de4b7cd8 ("drm/amd/pm/swsmu: unify the init soft gpu metrics function")
Link: https://github.com/ClangBuiltLinux/linux/issues/1304Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2021-02-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Restrict DRM_I915_DEBUG to developer builds (Chris)
- Fix return and error codes (Dan)
- Suspend/Resume fix (Chris)
- Disable atomics in L3 for gen9 (Chris)
- Flush before changing register state (Chris)
- Fix for GLK's HDMI (Ville)
- Fix ILK+'s plane strides with Xtiling (Ville)
- Correct surface base address for renderclear (Chris)
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YC7uQY1kt6w0tRp+@intel.com

Merge tag 'amd-drm-next-5.12-2021-02-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-02-18:

amdgpu:
- Prefer Bhawan's unused variable fix
- Fixes for high priority queues on gfx8,9
- swSMU fixes for sienna cichlid
- swSMU fixes for renoir
- mmhub client id fixes for arcturus
- SMUIO fixes for navi family
- swSMU fixes for vangogh
- GPU reset cleanup
- Display fixes
- GFX harvesting fix for sienna cichlid
- Fix reference clock on Renoir
- Misc fixes and cleanups

amdkfd:
- Fix for unique id query
- Fix recursive lock warnings

radeon:
- Remove confusing VCE messages on Oland
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218221531.3870-1-alexander.deucher@amd.com

Fixes the rlc reference clock used for GPU timestamps.
Value is 100Mhz.  Confirmed with hardware team.

v2: reword commit message.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1480Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Disable it on those boards.  No functional change, this just
removes the message about VCE failing to initialize.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197327Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

memalloc_nofs_save/restore are no longer sufficient to prevent recursive
lock warnings when holding locks that can be taken in MMU notifiers. Use
memalloc_noreclaim_save/restore instead.

Fixes: f920e413 ("mm: track mmu notifiers in fs_reclaim_acquire/release")
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NPhilip Yang <Philip.Yang@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x

dcn21_validate_bandwidth() calls functions that use floating point math.
On my machine this sometimes results in simd exceptions when there are
other FPU users such as KVM virtual machines running. The screen freezes
completely in this case.

Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the
problem. This mirrors the approach used for dcn20_validate_bandwidth.

Tested on a AMD Ryzen 7 PRO 4750U (Renoir).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987Signed-off-by: NJan Kokemüller <jan.kokemueller@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fix potential integer overflow by casting actual_calculated_clock_100hz
to u64, in order to give the compiler complete information about the
proper arithmetic to use.

Notice that such variable is used in a context that expects
an expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

actual_calculated_clock_100hz * post_divider

Fixes: 7a03fdf6 ("drm/amd/display: fix 64bit division issue on 32bit OS")
Addresses-Coverity-ID: 1501691 ("Unintentional integer overflow")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes: 9037246b ("drm/amd/display: Add sysfs interface for set/get srm")
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes incorrect TCC harvesting info reported to userspace.
The impact was a very very tiny performance degradation (unnecessary
GL2 cache flushes).
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The surface_state_base is an offset into the batch, so we need to pass
the correct batch address for STATE_BASE_ADDRESS.

Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20210210122728.20097-1-chris@chris-wilson.co.uk
(cherry picked from commit 1914911f4aa08ddc05bae71d3516419463e0c567)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

ilk+ planes get notably unhappy when the plane x+w exceeds
the stride. This wasn't a problem previously because we
always aligned SURF to the closest tile boundary so the
x offset never got particularly large. But now with async
flips we have to align to 256KiB instead and thus this
becomes a real issue.

On ilk/snb/ivb it looks like the accesses just wrap
early to the next tile row when scanout goes past the
SURF+n*stride boundary, hsw/bdw suffer more heavily and
start to underrun constantly. i965/g4x appear to be immune.
vlv/chv I've not yet checked.

Let's borrow another trick from the skl+ code and search
backwards for a better SURF offset in the hopes of getting the
x offset below the limit. IIRC when I ran into a similar issue
on skl years ago it was causing the hardware to fall over
pretty hard as well.

And let's be consistent and include i965/g4x in the check
as well, just in case I just got super lucky somehow when
I wasn't able to reproduce the issue. Not that it really
matters since we still use 4k SURF alignment for i965/g4x
anyway.

Fixes: 6ede6b06 ("drm/i915: Implement async flips for vlv/chv")
Fixes: 4bb18054 ("drm/i915: Implement async flip for ilk/snb")
Fixes: 2a636e24 ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f1 ("drm/i915: Implement async flips for bdw")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 59fb8218)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo also exported some functions from intel_display.c during backport]

Merge tag 'drm-misc-next-fixes-2021-02-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next-fixes cherry picked from drm-misc-next for v5.12:
- Assorted small fixes.
- Disable and remove gma3600 support.
- Fix CEC for vc4/hdmi.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dac2ae30-c5d9-4222-39e2-f64067310491@linux.intel.com

Ben wrote:
The problem is that GA100 added enough new engine types and instances
that we would have begun to overflow various u64 bitfields used to
track the connections between various engines.

Rather than addressing subdevs by a unique index, we give
each subdev a type and instance id, and replace the use of bitfields
tied to subdev index with other methods.

Notable changes:
- replace subdev index with subdev type + instance id
- engines that turn out to be fused-off (can't detect until later in
init) no longer leave dangling pointers around
- new subdev/instance additions no longer need to be made in multiple places
- ampere engine topology is now being parsed
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4c_Y923ng0rT1y23wktHHyjEMsusb0=9Z7kQaVbxyPyQ@mail.gmail.com

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>