This commit converts the source of the val_seq counter to
the ww_mutex api. The reservation objects are converted later,
because there is still a lockdep splat in nouveau that has to
resolved first.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds dpm support for SI asics.  This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2/gen3 switching
- power containment
- shader power scaling

Set radeon.dpm=1 to enable.

v2: enable hainan support, rebase
v3: guard acpi stuff
v4: fix 64 bit math
v5: fix 64 bit div harder
v6: fix thermal interrupt check noticed by Jerome
v7: attempt fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Validate the voltages against the voltage requirements of the
dispclk.  We currently don't adjust the disp clock so it never
changes, but we need to filter out voltage levels that are too
low none the less.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used by SI dpm.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for dpm on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it easier the understand what the code is
doing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are needed for certain UVD power saving features.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for DPM on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for accessing certain pcie related registers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI uses a new atom table revision.  Required for DPM on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI uses a new atom table.  Required for DPM on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There's a new table for calculating the memory pll
parameters on SI.  Required for SI DPM support.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These functions use acpi methods to adjust the pcie
gen speed.  Used by DPM.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that the proper fix has been implemented I can
remove the last remnants of the initial implementation.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed to properly handle dynamic state adjustment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.

v2: fix up redundant state sets
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Driver needs this information to validate power states.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This data will be needed for dpm on newer asics.

v2: fix typo in rebase
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When using UVD, the driver must switch to a special UVD power
state.  In the CS ioctl, switch to the power state and schedule
work to change the power state back, when the work comes up,
check if uvd is still busy and if not, switch back to the user
state, otherwise, reschedule the work.

Note:  We really need some better way to decide when to
switch out of the uvd power state.  Switching power states
while playback is active make uvd angry.

V2: fix locking.

V3: switch from timer to delayed work

V4: check fence driver for UVD jobs, reduce timeout to
    1 second and rearm timeout on activity

v5: rebase on new dpm tree

v6: rebase on interim uvd on demand changes

v7: fix UVD when DPM is disabled

v8: unify non-DPM and DPM UVD handling

v9: remove leftover idle work struct
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>

This adds dpm support for evergreen asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)

Set radeon.dpm=1 to enable.

v2: reduce stack usage, rename ulv struct
v3: fix thermal interrupt check notices by Jerome
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv7xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: fix 64 bit div
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv6xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: remove duplicate line
v3: fix thermal interrupt check noticed by Jerome
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

These are shared by rs780/rs880, rv6xx, and newer chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the common dpm (dynamic power management)
infrastructure:
- dpm callbacks
- dpm init/fini/suspend/resume
- dpm power state selection

No device specific code is enabled yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dpm needs access to atombios data and command tables
for setup and calculation of a number of parameters.

v2: endian fix
v3: fix mc reg table bug
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required for certain advanced functionality.

v2: save/restore list takes dword offsets
v3: rebase on gpu reset changes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On CIK, the compute rings work slightly differently than
on previous asics, however the basic concepts are the same.

The main differences:
- New MEC engines for compute queues
- Multiple queues per MEC:
  - CI/KB: 1 MEC, 4 pipes per MEC, 8 queues per pipe = 32 queues
  -    KV: 2 MEC, 4 pipes per MEC, 8 queues per pipe = 64 queues
- Queues can be allocated and scheduled by another queue
- New doorbell aperture allows you to assign space in the aperture
  for the wptr which allows for userspace access to queues

v2: add wptr shadow, fix eop setup
v3: fix comment
v4: switch to new callback method
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

The doorbell aperture is a PCI BAR whose pages can be
mapped to compute resources for things like wptrs
for userspace queues.

This patch maps the BAR and sets up a simple allocator
to allocate pages from the BAR.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add callbacks to the radeon_asic struct to handle
rptr/wptr fetchs and wptr updates.
We currently use one version for all rings, but this
allows us to override with a ring specific versions.

Needed for compute rings on CIK.

v2: udpate as per Christian's comments
v3: fix some rebase cruft
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CIK (DCE8) hw cursors are programmed the same as evergreen
(DCE4) with the following caveats:
- cursors are now 128x128 pixels
- new alpha blend enable bit

v2: rebase
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No support for reading the temperature yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CIK has new asynchronous DMA engines called sDMA
(system DMA).  Each engine supports 1 ring buffer
for kernel and gfx and 2 userspace queues for compute.

TODO: fill in the compute setup.

v2: update to the latest reset code
v3: remove ib_parse
v4: fix copy_dma()
v5: drop WIP compute sDMA queues
v6: rebase
v7: endian fixes for IB
v8: cleanup for release
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Todo:
- handle interrupts for compute queues

v2: add documentation
v3: update to latest reset code
v4: update to latest illegal CP handling
v5: fix missing break in interrupt handler switch statement
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently the driver required 6 sets of ucode:
1. pfp - pre-fetch parser, part of the GFX CP
2. me - micro engine, part of the GFX CP
3. ce - constant engine, part of the GFX CP
4. rlc - interrupt, etc. controller
5. mc - memory controller (discrete cards only)
6. mec - compute engines, part of Compute CP

V2: add documentation
V3: update MC ucode
V4: rebase
V5: update mc ucode
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>