Allow to build coresight-tmc as a module, for ease of development.

- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
  be called coresight-tmc by the Makefile
- add an tmc_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-14-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow to build coresight-tpiu as a module, for ease of development.

- Kconfig becomes a tristate, to allow =m
- add a tpiu_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-13-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow to build coresight-etb10 as a module, for ease of development.

- Kconfig becomes a tristate, to allow =m
- add an etb_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-12-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow to build coresight-etm4x as a module, for ease of development.

- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
  be called coresight-etm4x by the Makefile
- add an etm4_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- delay advertising the per-cpu etmdrvdata
- protect etmdrvdata[] by modifying it on relevant CPU

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-11-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow to build coresight-etm3x as a module, for ease of development.

- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
  be called coresight-etm3x by the Makefile
- add an etm_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- delay advertising the per-cpu etmdrvdata
- protect etmdrvdata[] by modifying it on relevant CPU

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: NMike Leach <mike.leach@linaro.org>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-10-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When coresight_build_path() fails on all the cpus, etm_setup_aux
calls etm_free_aux() to free allocated event_data.
WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty.
Check event_data->snk_config is not NULL first to avoid this
warning.

Fixes: f5200aa9 ("coresight: perf: Refactor function free_event_data()")
Reviewed-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-9-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

- Kconfig becomes a tristate, to allow =m
- add a stm_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-8-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When coresight device is in an active session, driver module of
that device should not be removed. Use try_get_module() in
coresight_grab_device() to prevent module to be unloaded.
Use get_device()/put_device() to protect device data
in the middle of active session.
Suggested-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-7-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Export symbols used among coresight modules.
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-6-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add coresight prefix to make it specific. It will be a export symbol.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-5-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking for ifdef CONFIG_x fails if CONFIG_x=m.  Use IS_ENABLED
that is true for both built-ins and modules, instead.  Required
when building coresight components as modules.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Define a MODULE_DEVICE_TABLE for cpu_debug so module can
be auto loaded on boot.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-3-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Provide name of cpu_debug module in Kconfig help section.
Tested-by: NMike Leach <mike.leach@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-2-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:

     * after nvmem_cell_info_to_nvmem_cell() failed during
       nvmem_add_cells()

     * during nvmem_device_cell_{read,write} when cell->name is
       kstrdup'ed() without calling kfree_const() at the end, but
       really there is no reason to do that 'dup, because the cell
       instance is allocated on the stack for some short period to be
       read/write without exposing it to the caller.

So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().

Fixes: e2a5402e ("nvmem: Add nvmem_device based consumer apis.")
Reviewed-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200923204456.14032-1-vadym.kochan@plvision.euSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In QMI new server notification we enable the NGD however during
delete server notification we do not disable the NGD.

This can lead to multiple instances of NGD being enabled, so make
sure that we disable NGD in delete server callback to fix this issue!

Fixes: 917809e2 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925095520.27316-4-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Let the controller logic decide when to enter into clock pause mode!
Entering in to pause mode during unregistration does not really make
sense as the controller is totally going down at that point in time.

Fixes: 4b14e62a ("slimbus: Add support for 'clock-pause' feature")
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925095520.27316-3-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

logical address can be either assigned by the SLIMBus controller or the core.
Core uses IDA in cases where get_addr callback is not provided by the
controller.
Core already has this check while allocating IDR, however during absence
reporting this is not checked. This patch fixes this issue.

Fixes: 46a2bb5a ("slimbus: core: Add slim controllers support")
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925095520.27316-2-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'misc-habanalabs-next-2020-09-25' of git://people.freedesktop.org/~gabbayo/linux into char-misc-next

Oded writes:

This tag contains the following changes for kernel 5.10-rc1:

- release the kernel context object after we reset the device. This is
  needed to prevent a race where the firmware still has some in-flight
  transcations that require the kernel context (and its memory mappings) to
  be alive.

- replace constant numbers with defines in QMAN initialization of GAUDI

- correct an error message text and add a few debug messages to help debug
  issues that happen during context open and close.

* tag 'misc-habanalabs-next-2020-09-25' of git://people.freedesktop.org/~gabbayo/linux:
  habanalabs/gaudi: configure QMAN LDMA registers properly
  habanalabs: add notice of device not idle
  habanalabs: add debug messages for opening/closing context
  habanalabs: release kernel context after hw_fini
  habanalabs: correct an error message

LDMA registers are configured with a fixed value.
We add new define set which gives the configuration
a proper meaning.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The device should be idle after a context is closed. If not, print a
notice.
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

During debugging of error we sometimes need to know whether the error
happened when a user context was open. Add debug prints when opening and
closing user contexts.
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Some engines use resources that belong to the kernel context (e.g. MMU
mappings). In case the halt-engines doesn't work properly due to H/W
restriction, we need to make sure the kernel context lives on until after
the hw_fini. The hw_fini resets the ASIC after that no engine is alive and
we can safely close the kernel context.
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

We don't try to allocate huge pages here so remove the huge word.
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Georgi writes:

interconnect changes for 5.10

Here are the interconnect changes for the 5.10-rc1 merge window
consisting of core changes, new drivers and cleanups.

Core changes:
 - New bulk API helpers for managing multiple interconnect paths.
 - New xlate_extended() interface for parsing additional data from DT.
 - Support for sync_state().

Driver changes:
 - New drivers for SM8150 and SM8250 platforms.
 - New drivers for the Qualcomm OSM and EPSS hardware blocks.
 - Per-BCM scaling factor support.
 - Misc cleanups.
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>

* tag 'icc-5.10-rc1' of https://git.linaro.org/people/georgi.djakov/linux: (28 commits)
  interconnect: imx: simplify the return expression of imx_icc_unregister
  interconnect: imx: Simplify with dev_err_probe()
  interconnect: core: Simplify with dev_err_probe()
  interconnect: qcom: Use icc_sync_state
  interconnect: Add sync state support
  interconnect: Add get_bw() callback
  interconnect: qcom: osm-l3: Mark more structures const
  interconnect: qcom: Add EPSS L3 support on SM8250
  dt-bindings: interconnect: Add EPSS L3 DT binding on SM8250
  interconnect: qcom: Lay the groundwork for adding EPSS support
  interconnect: qcom: Add OSM L3 support on SM8150
  dt-bindings: interconnect: Add OSM L3 DT binding on SM8150
  interconnect: qcom: sc7180: Replace xlate with xlate_extended
  interconnect: qcom: sdm845: Replace xlate with xlate_extended
  interconnect: qcom: Implement xlate_extended() to parse tags
  dt-bindings: interconnect: Document the support of optional path tag
  interconnect: Introduce xlate_extended() callback
  interconnect: qcom: Add support for per-BCM scaling factors
  interconnect: qcom: Only wait for completion in AMC/WAKE by default
  interconnect: qcom: Support bcm-voter-specific TCS wait behavior
  ...

This return statement is indented one tab too far.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200918143405.GF909725@mwandaSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.

The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.

Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.

Fixes: ba612aa8 ("misc: mic: SCIF memory registration and unregistration")
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of devm_platform_ioremap_resource() provided by driver
core platform instead of duplicated analogue.
Acked-by: NArnd Bergmann <arn@arndb.de>
Signed-off-by: NWang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20200918083634.33124-1-bobo.shaobowang@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'misc-habanalabs-next-2020-09-22' of git://people.freedesktop.org/~gabbayo/linux into char-misc-next

Oded writes:

This tag contains the following changes for kernel 5.10-rc1:

- Stop using the DRM's dma-fence module and instead use kernel completions.
- Support PCIe AER
- Use dma_mmap_coherent for memory allocated using dma_alloc_coherent
- Use smallest possible alignment when allocating virtual addresses in our
  MMU driver.
- Refactor MMU driver code to be device-oriented
- Allow user to check CS status without any sleep
- Add an option to map a Command Buffer to the Device's MMU
- Expose sync manager resource allocation to user through INFO IOCTL
- Convert code to use standard BIT(), GENMASK() and FIELD_PREP()
- Many small fixes (casting, better error messages, remove unused
  defines, h/w configuration fixes, etc.)

* tag 'misc-habanalabs-next-2020-09-22' of git://people.freedesktop.org/~gabbayo/linux: (46 commits)
  habanalabs: update scratchpad register map
  habanalabs: add indication of security-enabled F/W
  habanalabs/gaudi: fix DMA completions max outstanding to 15
  habanalabs/gaudi: remove axi drain support
  habanalabs: update firmware interface file
  habanalabs: Add an option to map CB to device MMU
  habanalabs: Save context in a command buffer object
  habanalabs: no need for DMA_SHARED_BUFFER
  habanalabs: allow to wait on CS without sleep
  habanalabs/gaudi: increase timeout for boot fit load
  habanalabs: add debugfs support for MMU with 6 HOPs
  habanalabs: add num_hops to hl_mmu_properties
  habanalabs: refactor MMU as device-oriented
  habanalabs: rename mmu.c to mmu_v1.c
  habanalabs: use smallest possible alignment for virtual addresses
  habanalabs: check flag before reset because of f/w event
  habanalabs: increase PQ COMP_OFFSET by one nibble
  habanalabs: Fix alignment issue in cpucp_info structure
  habanalabs: remove unused define
  habanalabs: remove unused ASIC function pointer
  ...

Our firmware use some scratchpad registers in the device for different
roles. Update the file to the latest version of the firmware code.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Future F/W versions will have enhanced security measures and the driver
won't be able to do certain configurations that it always did and those
configurations will be done by the firmware.

We use the firmware's preboot version to determine whether security
measures are enabled or not. Because we need this very early in our code,
the read of the preboot version is moved to the earliest possible place,
right after the device's PCI initialization.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This is a workaround for H/W bug H3-2116, where if there are more than 16
outstanding completions in the DMA transpose engine, there can be a
deadlock in the engine.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

AXI drain is broken in GAUDI so remove support for enabling it.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add new packet to fetch PLL information from firmware. This will be needed
in the future when the driver won't be able to access the PLL registers
directly
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Future changes require using a context while handling a command buffer,
and thus need to save the context in the command buffer object.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Now that the driver no longer uses dma_buf, we can remove the select of
DMA_SHARED_BUFFER from kconfig.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The user sometimes wants to check if a CS has completed to clean resources.
In that case, the user doesn't want to sleep but just to check if the CS
has finished and continue with his code.

Add a new definition to the API of the wait on CS. The new definition says
that if the timeout is 0, the driver won't sleep at all but return
immediately after checking if the CS has finished.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The firmware running in the boot stage takes more time to execute due to
increased security mechanisms. Therefore, we need to increase the timeout
we wait for the boot fit to finish loading.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This commit modify the existing debugfs code to support future devices that
have a 6 HOPs MMU implementation instead of 5 HOPs implementation.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This commit adds the number of HOPs supported by the device to the
device MMU properties.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>