Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 12 4月, 2023 3 次提交
    • D
      xfs: replace inode fork size macros with functions · ecdd11e4
      由 Darrick J. Wong 提交于 
      mainline inclusion
from mainline-v5.19-rc5
commit c01147d9
category: bugfix
bugzilla: 187164, https://gitee.com/openeuler/kernel/issues/I4KIAO
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c01147d929899f02a0a8b15e406d12784768ca72

--------------------------------

Replace the shouty macros here with typechecked helper functions.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

conflicts:
	fs/xfs/libxfs/xfs_attr_leaf.c
	fs/xfs/libxfs/xfs_bmap.c
	fs/xfs/libxfs/xfs_bmap_btree.c
	fs/xfs/libxfs/xfs_dir2.c
	fs/xfs/libxfs/xfs_inode_fork.h
	fs/xfs/scrub/symlink.c
	fs/xfs/xfs_itable.c
	fs/xfs/xfs_symlink.c
	fs/xfs/xfs_trace.h
Signed-off-by: NLong Li <leo.lilong@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
      ecdd11e4
    • D
      xfs: replace XFS_IFORK_Q with a proper predicate function · ad92c988
      由 Darrick J. Wong 提交于 
      mainline inclusion
from mainline-v5.19-rc5
commit 932b42c6
category: bugfix
bugzilla: 187164, https://gitee.com/openeuler/kernel/issues/I4KIAO
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=932b42c66cb5d0ca9800b128415b4ad6b1952b3e

--------------------------------

Replace this shouty macro with a real C function that has a more
descriptive name.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

conflicts:
	fs/xfs/libxfs/xfs_attr.h
	fs/xfs/libxfs/xfs_inode_fork.c
	fs/xfs/scrub/btree.c
	fs/xfs/xfs_inode.c
Signed-off-by: NLong Li <leo.lilong@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
      ad92c988
    • D
      xfs: make inode attribute forks a permanent part of struct xfs_inode · 947546ab
      由 Darrick J. Wong 提交于 
      mainline inclusion
from mainline-v5.19-rc5
commit 2ed5b09b
category: bugfix
bugzilla: 187164, https://gitee.com/openeuler/kernel/issues/I4KIAO
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2ed5b09b3e8fc274ae8fecd6ab7c5106a364bed1

--------------------------------

Syzkaller reported a UAF bug a while back:

==================================================================
BUG: KASAN: use-after-free in xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127
Read of size 4 at addr ffff88802cec919c by task syz-executor262/2958

CPU: 2 PID: 2958 Comm: syz-executor262 Not tainted
5.15.0-0.30.3-20220406_1406 #3
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29
04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
 print_address_description.constprop.9+0x21/0x2d5 mm/kasan/report.c:256
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold.14+0x7f/0x11b mm/kasan/report.c:459
 xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127
 xfs_attr_get+0x378/0x4c2 fs/xfs/libxfs/xfs_attr.c:159
 xfs_xattr_get+0xe3/0x150 fs/xfs/xfs_xattr.c:36
 __vfs_getxattr+0xdf/0x13d fs/xattr.c:399
 cap_inode_need_killpriv+0x41/0x5d security/commoncap.c:300
 security_inode_need_killpriv+0x4c/0x97 security/security.c:1408
 dentry_needs_remove_privs.part.28+0x21/0x63 fs/inode.c:1912
 dentry_needs_remove_privs+0x80/0x9e fs/inode.c:1908
 do_truncate+0xc3/0x1e0 fs/open.c:56
 handle_truncate fs/namei.c:3084 [inline]
 do_open fs/namei.c:3432 [inline]
 path_openat+0x30ab/0x396d fs/namei.c:3561
 do_filp_open+0x1c4/0x290 fs/namei.c:3588
 do_sys_openat2+0x60d/0x98c fs/open.c:1212
 do_sys_open+0xcf/0x13c fs/open.c:1228
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0x0
RIP: 0033:0x7f7ef4bb753d
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48
89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73
01 c3 48 8b 0d 1b 79 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007f7ef52c2ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000404148 RCX: 00007f7ef4bb753d
RDX: 00007f7ef4bb753d RSI: 0000000000000000 RDI: 0000000020004fc0
RBP: 0000000000404140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0030656c69662f2e
R13: 00007ffd794db37f R14: 00007ffd794db470 R15: 00007f7ef52c2fc0
 </TASK>

Allocated by task 2953:
 kasan_save_stack+0x19/0x38 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 __kasan_slab_alloc+0x68/0x7c mm/kasan/common.c:467
 kasan_slab_alloc include/linux/kasan.h:254 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slub.c:3213 [inline]
 slab_alloc mm/slub.c:3221 [inline]
 kmem_cache_alloc+0x11b/0x3eb mm/slub.c:3226
 kmem_cache_zalloc include/linux/slab.h:711 [inline]
 xfs_ifork_alloc+0x25/0xa2 fs/xfs/libxfs/xfs_inode_fork.c:287
 xfs_bmap_add_attrfork+0x3f2/0x9b1 fs/xfs/libxfs/xfs_bmap.c:1098
 xfs_attr_set+0xe38/0x12a7 fs/xfs/libxfs/xfs_attr.c:746
 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59
 __vfs_setxattr+0x11b/0x177 fs/xattr.c:180
 __vfs_setxattr_noperm+0x128/0x5e0 fs/xattr.c:214
 __vfs_setxattr_locked+0x1d4/0x258 fs/xattr.c:275
 vfs_setxattr+0x154/0x33d fs/xattr.c:301
 setxattr+0x216/0x29f fs/xattr.c:575
 __do_sys_fsetxattr fs/xattr.c:632 [inline]
 __se_sys_fsetxattr fs/xattr.c:621 [inline]
 __x64_sys_fsetxattr+0x243/0x2fe fs/xattr.c:621
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0x0

Freed by task 2949:
 kasan_save_stack+0x19/0x38 mm/kasan/common.c:38
 kasan_set_track+0x1c/0x21 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:360
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free mm/kasan/common.c:328 [inline]
 __kasan_slab_free+0xe2/0x10e mm/kasan/common.c:374
 kasan_slab_free include/linux/kasan.h:230 [inline]
 slab_free_hook mm/slub.c:1700 [inline]
 slab_free_freelist_hook mm/slub.c:1726 [inline]
 slab_free mm/slub.c:3492 [inline]
 kmem_cache_free+0xdc/0x3ce mm/slub.c:3508
 xfs_attr_fork_remove+0x8d/0x132 fs/xfs/libxfs/xfs_attr_leaf.c:773
 xfs_attr_sf_removename+0x5dd/0x6cb fs/xfs/libxfs/xfs_attr_leaf.c:822
 xfs_attr_remove_iter+0x68c/0x805 fs/xfs/libxfs/xfs_attr.c:1413
 xfs_attr_remove_args+0xb1/0x10d fs/xfs/libxfs/xfs_attr.c:684
 xfs_attr_set+0xf1e/0x12a7 fs/xfs/libxfs/xfs_attr.c:802
 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59
 __vfs_removexattr+0x106/0x16a fs/xattr.c:468
 cap_inode_killpriv+0x24/0x47 security/commoncap.c:324
 security_inode_killpriv+0x54/0xa1 security/security.c:1414
 setattr_prepare+0x1a6/0x897 fs/attr.c:146
 xfs_vn_change_ok+0x111/0x15e fs/xfs/xfs_iops.c:682
 xfs_vn_setattr_size+0x5f/0x15a fs/xfs/xfs_iops.c:1065
 xfs_vn_setattr+0x125/0x2ad fs/xfs/xfs_iops.c:1093
 notify_change+0xae5/0x10a1 fs/attr.c:410
 do_truncate+0x134/0x1e0 fs/open.c:64
 handle_truncate fs/namei.c:3084 [inline]
 do_open fs/namei.c:3432 [inline]
 path_openat+0x30ab/0x396d fs/namei.c:3561
 do_filp_open+0x1c4/0x290 fs/namei.c:3588
 do_sys_openat2+0x60d/0x98c fs/open.c:1212
 do_sys_open+0xcf/0x13c fs/open.c:1228
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0x0

The buggy address belongs to the object at ffff88802cec9188
 which belongs to the cache xfs_ifork of size 40
The buggy address is located 20 bytes inside of
 40-byte region [ffff88802cec9188, ffff88802cec91b0)
The buggy address belongs to the page:
page:00000000c3af36a1 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x2cec9
flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000200 ffffea00009d2580 0000000600000006 ffff88801a9ffc80
raw: 0000000000000000 0000000080490049 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88802cec9080: fb fb fb fc fc fa fb fb fb fb fc fc fb fb fb fb
 ffff88802cec9100: fb fc fc fb fb fb fb fb fc fc fb fb fb fb fb fc
>ffff88802cec9180: fc fa fb fb fb fb fc fc fa fb fb fb fb fc fc fb
                            ^
 ffff88802cec9200: fb fb fb fb fc fc fb fb fb fb fb fc fc fb fb fb
 ffff88802cec9280: fb fb fc fc fa fb fb fb fb fc fc fa fb fb fb fb
==================================================================

The root cause of this bug is the unlocked access to xfs_inode.i_afp
from the getxattr code paths while trying to determine which ILOCK mode
to use to stabilize the xattr data.  Unfortunately, the VFS does not
acquire i_rwsem when vfs_getxattr (or listxattr) call into the
filesystem, which means that getxattr can race with a removexattr that's
tearing down the attr fork and crash:

xfs_attr_set:                          xfs_attr_get:
xfs_attr_fork_remove:                  xfs_ilock_attr_map_shared:

xfs_idestroy_fork(ip->i_afp);
kmem_cache_free(xfs_ifork_cache, ip->i_afp);

                                       if (ip->i_afp &&

ip->i_afp = NULL;

                                           xfs_need_iread_extents(ip->i_afp))
                                       <KABOOM>

ip->i_forkoff = 0;

Regrettably, the VFS is much more lax about i_rwsem and getxattr than
is immediately obvious -- not only does it not guarantee that we hold
i_rwsem, it actually doesn't guarantee that we *don't* hold it either.
The getxattr system call won't acquire the lock before calling XFS, but
the file capabilities code calls getxattr with and without i_rwsem held
to determine if the "security.capabilities" xattr is set on the file.

Fixing the VFS locking requires a treewide investigation into every code
path that could touch an xattr and what i_rwsem state it expects or sets
up.  That could take years or even prove impossible; fortunately, we
can fix this UAF problem inside XFS.

An earlier version of this patch used smp_wmb in xfs_attr_fork_remove to
ensure that i_forkoff is always zeroed before i_afp is set to null and
changed the read paths to use smp_rmb before accessing i_forkoff and
i_afp, which avoided these UAF problems.  However, the patch author was
too busy dealing with other problems in the meantime, and by the time he
came back to this issue, the situation had changed a bit.

On a modern system with selinux, each inode will always have at least
one xattr for the selinux label, so it doesn't make much sense to keep
incurring the extra pointer dereference.  Furthermore, Allison's
upcoming parent pointer patchset will also cause nearly every inode in
the filesystem to have extended attributes.  Therefore, make the inode
attribute fork structure part of struct xfs_inode, at a cost of 40 more
bytes.

This patch adds a clunky if_present field where necessary to maintain
the existing logic of xattr fork null pointer testing in the existing
codebase.  The next patch switches the logic over to XFS_IFORK_Q and it
all goes away.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

conflicts:
	fs/xfs/libxfs/xfs_attr.c
	fs/xfs/libxfs/xfs_attr.h
	fs/xfs/libxfs/xfs_attr_leaf.c
	fs/xfs/libxfs/xfs_bmap.c
	fs/xfs/libxfs/xfs_inode_buf.c
	fs/xfs/libxfs/xfs_inode_fork.c
	fs/xfs/libxfs/xfs_inode_fork.h
	fs/xfs/xfs_attr_inactive.c
	fs/xfs/xfs_attr_list.c
	fs/xfs/xfs_icache.c
	fs/xfs/xfs_inode.c
	fs/xfs/xfs_inode.h
	fs/xfs/xfs_inode_item.c
	fs/xfs/xfs_itable.c
Signed-off-by: NLong Li <leo.lilong@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
      947546ab
  3. 15 3月, 2023 1 次提交
  5. 27 12月, 2021 2 次提交
    • D
      xfs: xfs_log_force_lsn isn't passed a LSN · e100c699
      由 Dave Chinner 提交于 
      mainline-inclusion
from mainline-v5.13-rc4
commit 5f9b4b0d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4KIAO
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5f9b4b0de8dc2fb8eb655463b438001c111570fe

-------------------------------------------------

In doing an investigation into AIL push stalls, I was looking at the
log force code to see if an async CIL push could be done instead.
This lead me to xfs_log_force_lsn() and looking at how it works.

xfs_log_force_lsn() is only called from inode synchronisation
contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn
value as the LSN to sync the log to. This gets passed to
xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the
journal, and then used by xfs_log_force_lsn() to flush the iclogs to
the journal.

The problem is that ip->i_itemp->ili_last_lsn does not store a
log sequence number. What it stores is passed to it from the
->iop_committing method, which is called by xfs_log_commit_cil().
The value this passes to the iop_committing method is the CIL
context sequence number that the item was committed to.

As it turns out, xlog_cil_force_lsn() converts the sequence to an
actual commit LSN for the related context and returns that to
xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn"
variable that contained a sequence with an actual LSN and then uses
that to sync the iclogs.

This caused me some confusion for a while, even though I originally
wrote all this code a decade ago. ->iop_committing is only used by
a couple of log item types, and only inode items use the sequence
number it is passed.

Let's clean up the API, CIL structures and inode log item to call it
a sequence number, and make it clear that the high level code is
using CIL sequence numbers and not on-disk LSNs for integrity
synchronisation purposes.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NGuo Xuenan <guoxuenan@huawei.com>
Reviewed-by: NLihong Kou <koulihong@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      e100c699
    • D
      xfs: Fix CIL throttle hang when CIL space used going backwards · 59ab51ec
      由 Dave Chinner 提交于 
      mainline-inclusion
from mainline-v5.13-rc4
commit 19f4e7cc
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4KIAO
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=19f4e7cc819771812a7f527d7897c2deffbf7a00

-------------------------------------------------

A hang with tasks stuck on the CIL hard throttle was reported and
largely diagnosed by Donald Buczek, who discovered that it was a
result of the CIL context space usage decrementing in committed
transactions once the hard throttle limit had been hit and processes
were already blocked.  This resulted in the CIL push not waking up
those waiters because the CIL context was no longer over the hard
throttle limit.

The surprising aspect of this was the CIL space usage going
backwards regularly enough to trigger this situation. Assumptions
had been made in design that the relogging process would only
increase the size of the objects in the CIL, and so that space would
only increase.

This change and commit message fixes the issue and documents the
result of an audit of the triggers that can cause the CIL space to
go backwards, how large the backwards steps tend to be, the
frequency in which they occur, and what the impact on the CIL
accounting code is.

Even though the CIL ctx->space_used can go backwards, it will only
do so if the log item is already logged to the CIL and contains a
space reservation for it's entire logged state. This is tracked by
the shadow buffer state on the log item. If the item is not
previously logged in the CIL it has no shadow buffer nor log vector,
and hence the entire size of the logged item copied to the log
vector is accounted to the CIL space usage. i.e.  it will always go
up in this case.

If the item has a log vector (i.e. already in the CIL) and the size
decreases, then the existing log vector will be overwritten and the
space usage will go down. This is the only condition where the space
usage reduces, and it can only occur when an item is already tracked
in the CIL. Hence we are safe from CIL space usage underruns as a
result of log items decreasing in size when they are relogged.

Typically this reduction in CIL usage occurs from metadata blocks
being free, such as when a btree block merge occurs or a directory
enter/xattr entry is removed and the da-tree is reduced in size.
This generally results in a reduction in size of around a single
block in the CIL, but also tends to increase the number of log
vectors because the parent and sibling nodes in the tree needs to be
updated when a btree block is removed. If a multi-level merge
occurs, then we see reduction in size of 2+ blocks, but again the
log vector count goes up.

The other vector is inode fork size changes, which only log the
current size of the fork and ignore the previously logged size when
the fork is relogged. Hence if we are removing items from the inode
fork (dir/xattr removal in shortform, extent record removal in
extent form, etc) the relogged size of the inode for can decrease.

No other log items can decrease in size either because they are a
fixed size (e.g. dquots) or they cannot be relogged (e.g. relogging
an intent actually creates a new intent log item and doesn't relog
the old item at all.) Hence the only two vectors for CIL context
size reduction are relogging inode forks and marking buffers active
in the CIL as stale.

Long story short: the majority of the code does the right thing and
handles the reduction in log item size correctly, and only the CIL
hard throttle implementation is problematic and needs fixing. This
patch makes that fix, as well as adds comments in the log item code
that result in items shrinking in size when they are relogged as a
clear reminder that this can and does happen frequently.

The throttle fix is based upon the change Donald proposed, though it
goes further to ensure that once the throttle is activated, it
captures all tasks until the CIL push issues a wakeup, regardless of
whether the CIL space used has gone back under the throttle
threshold.

This ensures that we prevent tasks reducing the CIL slightly under
the throttle threshold and then making more changes that push it
well over the throttle limit. This is acheived by checking if the
throttle wait queue is already active as a condition of throttling.
Hence once we start throttling, we continue to apply the throttle
until the CIL context push wakes everything on the wait queue.

We can use waitqueue_active() for the waitqueue manipulations and
checks as they are all done under the ctx->xc_push_lock. Hence the
waitqueue has external serialisation and we can safely peek inside
the wait queue without holding the internal waitqueue locks.

Many thanks to Donald for his diagnostic and analysis work to
isolate the cause of this hang.
Reported-and-tested-by: NDonald Buczek <buczek@molgen.mpg.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NGuo Xuenan <guoxuenan@huawei.com>
Reviewed-by: NLihong Kou <koulihong@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      59ab51ec
  7. 16 9月, 2020 3 次提交
  9. 07 9月, 2020 1 次提交
    • D
      xfs: xfs_iflock is no longer a completion · 718ecc50
      由 Dave Chinner 提交于 
      With the recent rework of the inode cluster flushing, we no longer
ever wait on the the inode flush "lock". It was never a lock in the
first place, just a completion to allow callers to wait for inode IO
to complete. We now never wait for flush completion as all inode
flushing is non-blocking. Hence we can get rid of all the iflock
infrastructure and instead just set and check a state flag.

Rename the XFS_IFLOCK flag to XFS_IFLUSHING, convert all the
xfs_iflock_nowait() test-and-set operations on that flag, and
replace all the xfs_ifunlock() calls to clear operations.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      718ecc50
  11. 05 8月, 2020 1 次提交
  13. 29 7月, 2020 1 次提交
  15. 07 7月, 2020 10 次提交
    • D
      xfs: factor xfs_iflush_done · a69a1dc2
      由 Dave Chinner 提交于 
      xfs_iflush_done() does 3 distinct operations to the inodes attached
to the buffer. Separate these operations out into functions so that
it is easier to modify these operations independently in future.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      a69a1dc2
    • D
      xfs: rework xfs_iflush_cluster() dirty inode iteration · 5717ea4d
      由 Dave Chinner 提交于 
      Now that we have all the dirty inodes attached to the cluster
buffer, we don't actually have to do radix tree lookups to find
them. Sure, the radix tree is efficient, but walking a linked list
of just the dirty inodes attached to the buffer is much better.

We are also no longer dependent on having a locked inode passed into
the function to determine where to start the lookup. This means we
can drop it from the function call and treat all inodes the same.

We also make xfs_iflush_cluster skip inodes marked with
XFS_IRECLAIM. This we avoid races with inodes that reclaim is
actively referencing or are being re-initialised by inode lookup. If
they are actually dirty, they'll get written by a future cluster
flush....

We also add a shutdown check after obtaining the flush lock so that
we catch inodes that are dirty in memory and may have inconsistent
state due to the shutdown in progress. We abort these inodes
directly and so they remove themselves directly from the buffer list
and the AIL rather than having to wait for the buffer to be failed
and callbacks run to be processed correctly.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      5717ea4d
    • D
      xfs: xfs_iflush() is no longer necessary · 90c60e16
      由 Dave Chinner 提交于 
      Now we have a cached buffer on inode log items, we don't need
to do buffer lookups when flushing inodes anymore - all we need
to do is lock the buffer and we are ready to go.

This largely gets rid of the need for xfs_iflush(), which is
essentially just a mechanism to look up the buffer and flush the
inode to it. Instead, we can just call xfs_iflush_cluster() with a
few modifications to ensure it also flushes the inode we already
hold locked.

This allows the AIL inode item pushing to be almost entirely
non-blocking in XFS - we won't block unless memory allocation
for the cluster inode lookup blocks or the block device queues are
full.

Writeback during inode reclaim becomes a little more complex because
we now have to lock the buffer ourselves, but otherwise this change
is largely a functional no-op that removes a whole lot of code.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      90c60e16
    • D
      xfs: attach inodes to the cluster buffer when dirtied · 48d55e2a
      由 Dave Chinner 提交于 
      Rather than attach inodes to the cluster buffer just when we are
doing IO, attach the inodes to the cluster buffer when they are
dirtied. The means the buffer always carries a list of dirty inodes
that reference it, and we can use that list to make more fundamental
changes to inode writeback that aren't otherwise possible.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      48d55e2a
    • D
      xfs: pin inode backing buffer to the inode log item · 298f7bec
      由 Dave Chinner 提交于 
      When we dirty an inode, we are going to have to write it disk at
some point in the near future. This requires the inode cluster
backing buffer to be present in memory. Unfortunately, under severe
memory pressure we can reclaim the inode backing buffer while the
inode is dirty in memory, resulting in stalling the AIL pushing
because it has to do a read-modify-write cycle on the cluster
buffer.

When we have no memory available, the read of the cluster buffer
blocks the AIL pushing process, and this causes all sorts of issues
for memory reclaim as it requires inode writeback to make forwards
progress. Allocating a cluster buffer causes more memory pressure,
and results in more cluster buffers to be reclaimed, resulting in
more RMW cycles to be done in the AIL context and everything then
backs up on AIL progress. Only the synchronous inode cluster
writeback in the the inode reclaim code provides some level of
forwards progress guarantees that prevent OOM-killer rampages in
this situation.

Fix this by pinning the inode backing buffer to the inode log item
when the inode is first dirtied (i.e. in xfs_trans_log_inode()).
This may mean the first modification of an inode that has been held
in cache for a long time may block on a cluster buffer read, but
we can do that in transaction context and block safely until the
buffer has been allocated and read.

Once we have the cluster buffer, the inode log item takes a
reference to it, pinning it in memory, and attaches it to the log
item for future reference. This means we can always grab the cluster
buffer from the inode log item when we need it.

When the inode is finally cleaned and removed from the AIL, we can
drop the reference the inode log item holds on the cluster buffer.
Once all inodes on the cluster buffer are clean, the cluster buffer
will be unpinned and it will be available for memory reclaim to
reclaim again.

This avoids the issues with needing to do RMW cycles in the AIL
pushing context, and hence allows complete non-blocking inode
flushing to be performed by the AIL pushing context.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      298f7bec
    • D
      xfs: move xfs_clear_li_failed out of xfs_ail_delete_one() · e98084b8
      由 Dave Chinner 提交于 
      xfs_ail_delete_one() is called directly from dquot and inode IO
completion, as well as from the generic xfs_trans_ail_delete()
function. Inodes are about to have their own failure handling, and
dquots will in future, too. Pull the clearing of the LI_FAILED flag
up into the callers so we can customise the code appropriately.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      e98084b8
    • D
      xfs: unwind log item error flagging · 3536b61e
      由 Dave Chinner 提交于 
      When an buffer IO error occurs, we want to mark all
the log items attached to the buffer as failed. Open code
the error handling loop so that we can modify the flagging for the
different types of objects directly and independently of each other.

This also allows us to remove the ->iop_error method from the log
item operations.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      3536b61e
    • D
      xfs: make inode IO completion buffer centric · aac855ab
      由 Dave Chinner 提交于 
      Having different io completion callbacks for different inode states
makes things complex. We can detect if the inode is stale via the
XFS_ISTALE flag in IO completion, so we don't need a special
callback just for this.

This means inodes only have a single iodone callback, and inode IO
completion is entirely buffer centric at this point. Hence we no
longer need to use a log item callback at all as we can just call
xfs_iflush_done() directly from the buffer completions and walk the
buffer log item list to complete the all inodes under IO.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      aac855ab
    • D
      xfs: add an inode item lock · 1319ebef
      由 Dave Chinner 提交于 
      The inode log item is kind of special in that it can be aggregating
new changes in memory at the same time time existing changes are
being written back to disk. This means there are fields in the log
item that are accessed concurrently from contexts that don't share
any locking at all.

e.g. updating ili_last_fields occurs at flush time under the
ILOCK_EXCL and flush lock at flush time, under the flush lock at IO
completion time, and is read under the ILOCK_EXCL when the inode is
logged.  Hence there is no actual serialisation between reading the
field during logging of the inode in transactions vs clearing the
field in IO completion.

We currently get away with this by the fact that we are only
clearing fields in IO completion, and nothing bad happens if we
accidentally log more of the inode than we actually modify. Worst
case is we consume a tiny bit more memory and log bandwidth.

However, if we want to do more complex state manipulations on the
log item that requires updates at all three of these potential
locations, we need to have some mechanism of serialising those
operations. To do this, introduce a spinlock into the log item to
serialise internal state.

This could be done via the xfs_inode i_flags_lock, but this then
leads to potential lock inversion issues where inode flag updates
need to occur inside locks that best nest inside the inode log item
locks (e.g. marking inodes stale during inode cluster freeing).
Using a separate spinlock avoids these sorts of problems and
simplifies future code.

This does not touch the use of ili_fields in the item formatting
code - that is entirely protected by the ILOCK_EXCL at this point in
time, so it remains untouched.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      1319ebef
    • D
      xfs: remove logged flag from inode log item · 1dfde687
      由 Dave Chinner 提交于 
      This was used to track if the item had logged fields being flushed
to disk. We log everything in the inode these days, so this logic is
no longer needed. Remove it.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      1dfde687
  17. 20 5月, 2020 2 次提交
  19. 07 5月, 2020 4 次提交
  21. 05 5月, 2020 1 次提交
  23. 29 3月, 2020 1 次提交
  25. 27 3月, 2020 2 次提交
  27. 19 3月, 2020 2 次提交
  29. 03 3月, 2020 2 次提交
  31. 19 11月, 2019 1 次提交
  33. 14 11月, 2019 2 次提交
  35. 05 11月, 2019 1 次提交