VCE clocks are set to be disabled, when not in use.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

can't get uvd's state by uvd_enabled. uvd_enabled
is used for request higher mclk.
in multi-display case, mclk has been in highest clock,
no matter uvd's state changed, uvd_enabled will not
be changed.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Forget to check UCODE_ID_STORAGE case and will cause to print error
message when loading driver, correct it.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtualization, firmware loading need the firmware version info,
and will load the right firmware. So, transfer fw_version to toc.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the root cause is we gate the clock to uvd vcpu.
mclk's change should need the response from uvd if
it is power on.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's per queue not per pipe.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit a693e050.

This breaks on systems with huge amounts of system memory as we do not have
enough vram to store the page tables.  Additionally, this is less of an issue
with the recent gtt manager changes.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Just refactoring HDMI driver by using infoframe helper
function, fixing GSC Kconfig dependency issue and including trivial
cleanups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency
  drm/exynos: gsc: fix spelling mistakes
  exynos-drm: Fix error messages to print flags and size
  drm/exynos/hdmi: refactor infoframe code

- lots of code cleanup
- lots of bug fixes
- expose rpm based fan info via hwmon
- lots of clock and powergating fixes
- SI register header cleanup and conversion to common format used by newer asics

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (54 commits)
  drm/amdgpu: drop is_display_hung from display funcs
  drm/amdgpu/uvd: reduce IB parsing overhead on UVD5+ (v2)
  drm/amdgpu/uvd: consolidate code for fetching addr from ctx
  drm/amdgpu: Disable DPM in virtualization
  drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs (v2)
  drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)
  drm/amdgpu: fix error handling in amdgpu_bo_create_restricted
  drm/amdgpu: fix amdgpu_fill_buffer (v2)
  drm/amdgpu: remove amdgpu_irq_get_delayed
  amdgpu: Wrap dev_err() calls on vm faults with printk_ratelimit()
  amdgpu: Use dev_err() over vanilla printk() in vm_decode_fault()
  drm/amd/amdgpu: port of DCE v6 to new headers (v3)
  drm/amdgpu: cleanup unused iterator members for sdma v2.4
  drm/amdgpu: cleanup unused iterator members for sdma v3
  drm/amdgpu:impl vgt_flush for VI(V5)
  drm/amdgpu: enable uvd mgcg for Fiji.
  drm/amdgpu: refine cz uvd clock gate logic.
  drm/amdgpu: change log level to KERN_INFO in ci_dpm.c
  drm/amdgpu: always un-gate UVD REGS path.
  drm/amdgpu/sdma: fix typo in packet setup
  ...

- fix dma-buf export path to return correct SG table
- trivially implement direct dma-buf mapping
- allow DRAW_INSTANCED commands in validator
- make the driver work on i.MX6SX, yielding a working 2D/3D stack
together with Mareks MXS DRM driver

* 'drm-etnaviv-next' of git://git.pengutronix.de/lst/linux:
  MAINTAINERS: add etnaviv mailinglist
  drm/etnaviv: move linear window on MC1.0 parts if necessary
  drm/etnaviv: don't invoke OOM killer from dump code
  drm/etnaviv: fix gem_prime_get_sg_table to return new SG table
  drm/etnaviv: Allow DRAW_INSTANCED commands
  drm/etnaviv: implement dma-buf mmap

- BIT_PERF_PTRS uses 32-bit pointers to its subtables, we were parsing
them as 16-bit, causing various issues on newer boards.
- Support for MXM on GM20x and up.
- More display-related fixes.

* 'linux-4.10' of git://github.com/skeggsb/linux:
  drm/nouveau/mxm: warn more loudly on unsupported DCB version
  drm/nouveau/mxm: handle DCB 4.1 modification
  drm/nouveau/bios/mxm: handle digital connector table 1.1
  drm/nouveau: Queue hpd_work on (runtime) resume
  drm/nouveau: Rename acpi_work to hpd_work
  drm/nouveau/kms/nv50: Fix atomic pageflip events.
  drm/nouveau/fb/ram/gp100-: fix memory detection where FBP_NUM != FBPA_NUM
  drm/nouveau/bios/volt: pointers are 32-bit
  drm/nouveau/bios/vmap: pointers are 32-bit
  drm/nouveau/bios/timing: pointers are 32-bit
  drm/nouveau/bios/therm: pointers are 32-bit
  drm/nouveau/bios/perf: pointers are 32-bit
  drm/nouveau/bios/iccsense: pointers are 32-bit
  drm/nouveau/bios/fan: pointers are 32-bit
  drm/nouveau/bios/cstep: pointers are 32-bit
  drm/nouveau/bios/boost: pointers are 32-bit

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allows MXM DCB modification to be handled on GM20x and newer boards.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I suspect the version bump is just to signify that the table now specifies
pad macro/links instead of SOR/sublinks.

For our usage of the table, just recognising the new version is enough.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Commit aeefb368 ("drm/exynos: gsc: add device tree support and remove
usage of static mappings") made the DRM_EXYNOS_GSC Kconfig symbol to only
be selectable if the exynos-gsc V4L2 driver isn't enabled, since both use
the same HW IP block.

But added the dependency as depends on !VIDEO_SAMSUNG_EXYNOS_GSC which is
not correct since Kconfig expressions are not boolean but tristate. So it
will only evaluate to 'n' if VIDEO_SAMSUNG_EXYNOS_GSC=y but will evaluate
to 'm' if VIDEO_SAMSUNG_EXYNOS_GSC=m.

This means that both the V4L2 and DRM drivers can be enabled if the former
is enabled as a module, which isn't what we want since otherwise 2 drivers
could attempt to use the hardware at the same time.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Trivial fixes to spelling mistakes "precalser" to "prescaler"
in dev_err messages
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fix exynos_drm_gem_create() error messages to include flags and size when
flags and size are invalid.
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Use core helpers to generate infoframes and generate vendor frame if necessary.

Changelog:
- changed 'ret >= 0' checks to '!ret'
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Linux 4.9-rc8

Daniel requested this so we could apply some follow on fixes cleanly to -next.

Pull drm fixes from Dave Airlie:
 "A pretty small pull request: a couple of AMD powerxpress regression
  fixes and a power management fix, a couple of i915 fixes and one hdlcd
  fix, along with one core don't oops because of incorrect API usage fix"

* tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: drop the struct_mutex when wedged or trying to reset
  drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
  drm: Don't call drm_for_each_crtc with a non-KMS driver
  drm/radeon: fix check for port PM availability
  drm/amdgpu: fix check for port PM availability
  drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr
  drm: hdlcd: Fix cleanup order

Merge tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

2 intel fixes.

* tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: drop the struct_mutex when wedged or trying to reset
  drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error

Merge more fixes from Andrew Morton:
 "2 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, vmscan: add cond_resched() into shrink_node_memcg()
  mm: workingset: fix NULL ptr in count_shadow_nodes

Boris Zhmurov has reported RCU stalls during the kswapd reclaim:

  INFO: rcu_sched detected stalls on CPUs/tasks:
   23-...: (22 ticks this GP) idle=92f/140000000000000/0 softirq=2638404/2638404 fqs=23
   (detected by 4, t=6389 jiffies, g=786259, c=786258, q=42115)
  Task dump for CPU 23:
  kswapd1         R  running task        0   148      2 0x00000008
  Call Trace:
    shrink_node+0xd2/0x2f0
    kswapd+0x2cb/0x6a0
    mem_cgroup_shrink_node+0x160/0x160
    kthread+0xbd/0xe0
    __switch_to+0x1fa/0x5c0
    ret_from_fork+0x1f/0x40
    kthread_create_on_node+0x180/0x180

a closer code inspection has shown that we might indeed miss all the
scheduling points in the reclaim path if no pages can be isolated from
the LRU list.  This is a pathological case but other reports from Donald
Buczek have shown that we might indeed hit such a path:

        clusterd-989   [009] .... 118023.654491: mm_vmscan_direct_reclaim_end: nr_reclaimed=193
         kswapd1-86    [001] dN.. 118023.987475: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239830 nr_taken=0 file=1
         kswapd1-86    [001] dN.. 118024.320968: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239844 nr_taken=0 file=1
         kswapd1-86    [001] dN.. 118024.654375: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239858 nr_taken=0 file=1
         kswapd1-86    [001] dN.. 118024.987036: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239872 nr_taken=0 file=1
         kswapd1-86    [001] dN.. 118025.319651: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239886 nr_taken=0 file=1
         kswapd1-86    [001] dN.. 118025.652248: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239900 nr_taken=0 file=1
         kswapd1-86    [001] dN.. 118025.984870: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239914 nr_taken=0 file=1
  [...]
         kswapd1-86    [001] dN.. 118084.274403: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4241133 nr_taken=0 file=1

this is minute long snapshot which didn't take a single page from the
LRU.  It is not entirely clear why only 1303 pages have been scanned
during that time (maybe there was a heavy IRQ activity interfering).

In any case it looks like we can really hit long periods without
scheduling on non preemptive kernels so an explicit cond_resched() in
shrink_node_memcg which is independent on the reclaim operation is due.

Link: http://lkml.kernel.org/r/20161202095841.16648-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NBoris Zhmurov <bb@kernelpanic.ru>
Tested-by: NBoris Zhmurov <bb@kernelpanic.ru>
Reported-by: NDonald Buczek <buczek@molgen.mpg.de>
Reported-by: N"Christopher S. Aker" <caker@theshore.net>
Reported-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg
aware") has made the workingset shadow nodes shrinker memcg aware.  The
implementation is not correct though because memcg_kmem_enabled() might
become true while we are doing a global reclaim when the sc->memcg might
be NULL which is exactly what Marek has seen:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000400
  IP: [<ffffffff8122d520>] mem_cgroup_node_nr_lru_pages+0x20/0x40
  PGD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 60 Comm: kswapd0 Tainted: G           O   4.8.10-12.pvops.qubes.x86_64 #1
  task: ffff880011863b00 task.stack: ffff880011868000
  RIP: mem_cgroup_node_nr_lru_pages+0x20/0x40
  RSP: e02b:ffff88001186bc70  EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff88001186bd20 RCX: 0000000000000002
  RDX: 000000000000000c RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff88001186bc70 R08: 28f5c28f5c28f5c3 R09: 0000000000000000
  R10: 0000000000006c34 R11: 0000000000000333 R12: 00000000000001f6
  R13: ffffffff81c6f6a0 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff880013c00000(0000) knlGS:ffff880013d00000
  CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000400 CR3: 00000000122f2000 CR4: 0000000000042660
  Call Trace:
    count_shadow_nodes+0x9a/0xa0
    shrink_slab.part.42+0x119/0x3e0
    shrink_node+0x22c/0x320
    kswapd+0x32c/0x700
    kthread+0xd8/0xf0
    ret_from_fork+0x1f/0x40
  Code: 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 3b 35 dd eb b1 00 55 48 89 e5 73 2c 89 d2 31 c9 31 c0 4c 63 ce 48 0f a3 ca 73 13 <4a> 8b b4 cf 00 04 00 00 41 89 c8 4a 03 84 c6 80 00 00 00 83 c1
  RIP  mem_cgroup_node_nr_lru_pages+0x20/0x40
   RSP <ffff88001186bc70>
  CR2: 0000000000000400
  ---[ end trace 100494b9edbdfc4d ]---

This patch fixes the issue by checking sc->memcg rather than
memcg_kmem_enabled() which is sufficient because shrink_slab makes sure
that only memcg aware shrinkers will get non-NULL memcgs and only if
memcg_kmem_enabled is true.

Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware")
Link: http://lkml.kernel.org/r/20161201132156.21450-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NMarek Marczykowski-Górecki <marmarek@mimuw.edu.pl>
Tested-by: NMarek Marczykowski-Górecki <marmarek@mimuw.edu.pl>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When building a specific target such as bzImage, modules aren't normally
built.  However if CONFIG_TRIM_UNUSED_KSYMS is enabled, no built modules
means none of the exported symbols are used and therefore they will all
be trimmed away from the final kernel.  A subsequent "make modules" will
fail because modpost cannot find the needed symbols for those modules in
the kernel binary.

Let's make sure modules are also built whenever CONFIG_TRIM_UNUSED_KSYMS
is enabled and that the kernel binary is properly rebuilt accordingly.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "This should be the last set of bugfixes for arm-soc in v4.9. None of
  these are critical regressions, but it would be nice to still get them
  merged.

   - On the Juno platform, the idle latency was described wrong, leading
     to suboptimal cpuidle tuning.

   - Also on the same platform, PCI I/O space was set up incorrectly and
     could not work.

   - On the sti platform, a syntactically incorrect DT entry caused
     warnings.

   - The newly added 'gr8' platform has somewhat confusing file names,
     which we rename for consistency"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
  arm64: dts: juno: Correct PCI IO window
  ARM: dts: STiH407-family: fix i2c nodes
  ARM: gr8: Rename the DTSI and relevant DTS

Pull networking fixes from David Miller:

 1) Lots more phydev and probe error path leaks in various drivers by
    Johan Hovold.

 2) Fix race in packet_set_ring(), from Philip Pettersson.

 3) Use after free in dccp_invalid_packet(), from Eric Dumazet.

 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric
    Dumazet.

 5) When tunneling between ipv4 and ipv6 we can be left with the wrong
    skb->protocol value as we enter the IPSEC engine and this causes all
    kinds of problems. Set it before the output path does any
    dst_output() calls, from Eli Cooper.

 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from
    Florian Fainelli.

 7) Various netfilter nat bug fixes from FLorian Westphal.

 8) Fix memory leak in ipvlan_link_new(), from Gao Feng.

 9) Locking fixes, particularly wrt. socket lookups, in l2tp from
    Guillaume Nault.

10) Avoid invoking rhash teardowns in atomic context by moving netlink
    cb->done() dump completion from a worker thread. Fix from Herbert
    Xu.

11) Buffer refcount problems in tun and macvtap on errors, from Jason
    Wang.

12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user
    selects BBR. Fix from Julian Wollrath.

13) Fix deadlock in transmit path on altera TSE driver, from Lino
    Sanfilippo.

14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita
    Yushchenko.

15) tc_tunnel_key needs to be properly exported to userspace via uapi,
    fix from Roi Dayan.

16) rds_tcp_init_net() doesn't unregister notifier in error path, fix
    from Sowmini Varadhan.

17) Stale packet header pointer access after pskb_expand_head() in
    genenve driver, fix from Sabrina Dubroca.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
  net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
  geneve: avoid use-after-free of skb->data
  tipc: check minimum bearer MTU
  net: renesas: ravb: unintialized return value
  sh_eth: remove unchecked interrupts for RZ/A1
  net: bcmgenet: Utilize correct struct device for all DMA operations
  NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040
  cdc_ether: Fix handling connection notification
  ip6_offload: check segs for NULL in ipv6_gso_segment.
  RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
  Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"
  ipv6: Set skb->protocol properly for local output
  ipv4: Set skb->protocol properly for local output
  packet: fix race condition in packet_set_ring
  net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
  net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers
  net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
  net: ethernet: stmmac: platform: fix outdated function header
  net: ethernet: stmmac: dwmac-meson8b: fix probe error path
  net: ethernet: stmmac: dwmac-generic: fix probe error path
  ...

CAP_NET_ADMIN users should not be allowed to set negative
sk_sndbuf or sk_rcvbuf values, as it can lead to various memory
corruptions, crashes, OOM...

Note that before commit 82981930 ("net: cleanups in
sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF
and SO_RCVBUF were vulnerable.

This needs to be backported to all known linux kernels.

Again, many thanks to syzkaller team for discovering this gem.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

geneve{,6}_build_skb can end up doing a pskb_expand_head(), which
makes the ip_hdr(skb) reference we stashed earlier stale. Since it's
only needed as an argument to ip_tunnel_ecn_encap(), move this
directly in the function call.

Fixes: 08399efc ("geneve: ensure ECN info is handled properly in all tx/rx paths")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Qian Zhang (张谦) reported a potential socket buffer overflow in
tipc_msg_build() which is also known as CVE-2016-8632: due to
insufficient checks, a buffer overflow can occur if MTU is too short for
even tipc headers. As anyone can set device MTU in a user/net namespace,
this issue can be abused by a regular user.

As agreed in the discussion on Ben Hutchings' original patch, we should
check the MTU at the moment a bearer is attached rather than for each
processed packet. We also need to repeat the check when bearer MTU is
adjusted to new device MTU. UDP case also needs a check to avoid
overflow when calculating bearer MTU.

Fixes: b97bf3fd ("[TIPC] Initial merge")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Reported-by: NQian Zhang (张谦) <zhangqian-c@360.cn>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.9-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-12-02

this is a pull request for net/master.

There are two patches by Stephane Grosjean, who adds support for the new
PCAN-USB X6 USB interface to the pcan_usb driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want to set the other "err" variable here so that we can return it
later.  My version of GCC misses this issue but I caught it with a
static checker.

Fixes: 9f70eb33 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When streaming a lot of data and the RZ/A1 can't keep up, some status bits
will get set that are not being checked or cleared which cause the
following messages and the Ethernet driver to stop working. This
patch fixes that issue.

irq 21: nobody cared (try booting with the "irqpoll" option)
handlers:
[<c036b71c>] sh_eth_interrupt
Disabling IRQ #21

Fixes: db893473 ("sh_eth: Add support for r7s72100")
Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the
same struct device during unmap that was used for the map operation,
which makes DMA-API debugging warn about it. Fix this by always using
&priv->pdev->dev throughout the driver, using an identical device
reference for all map/unmap calls.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ozgur Karatas reported that the very first entry in the CREDITS file had
the wrong tag for name (M: instead of N: - it happened when moving the
entry from the MAINTAINERS file, where 'M:' stands for "Maintainer").

And when I went looking, I found a couple of other cases of wrong
tagging too.
Reported-by: NOzgur Karatas <mueddib@yandex.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for PID 0x1040 of Telit LE922A.

The qmi adapter requires to have DTR set for proper working,
so QMI_WWAN_QUIRK_DTR has been enabled.
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit bfe9b9d2 ("cdc_ether: Improve ZTE MF823/831/910 handling")
introduced a work-around in usbnet_cdc_status() for devices that exported
cdc carrier on twice on connect. Before the commit, this behavior caused
the link state to be incorrect. It was assumed that all CDC Ethernet
devices would either export this behavior, or send one off and then one on
notification (which seems to be the default behavior).

Unfortunately, it turns out multiple devices sends a connection
notification multiple times per second (via an interrupt), even when
connection state does not change. This has been observed with several
different USB LAN dongles (at least), for example 13b1:0041 (Linksys).
After bfe9b9d2, the link state has been set as down and then up for
each notification. This has caused a flood of Netlink NEWLINK messages and
syslog to be flooded with messages similar to:

cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped

This commit fixes the behavior by reverting usbnet_cdc_status() to how it
was before bfe9b9d2. The work-around has been moved to a separate
status-function which is only called when a known, affect device is
detected.

v1->v2:

* Do not open-code netif_carrier_ok() (thanks Henning Schild).
* Call netif_carrier_off() instead of usb_link_change(). This prevents
calling schedule_work() twice without giving the work queue a chance to be
processed (thanks Bjørn Mork).

Fixes: bfe9b9d2 ("cdc_ether: Improve ZTE MF823/831/910 handling")
Reported-by: NHenning Schild <henning.schild@siemens.com>
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

segs needs to be checked for being NULL in ipv6_gso_segment() before calling
skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference:

[   97.811262] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[   97.819112] IP: [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[   97.825214] PGD 0 [   97.827047]
[   97.828540] Oops: 0000 [#1] SMP
[   97.831678] Modules linked in: vhost_net vhost macvtap macvlan nfsv3 rpcsec_gss_krb5
nfsv4 dns_resolver nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4
iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack
ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter
bridge stp llc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel
snd_hda_codec edac_mce_amd snd_hda_core edac_core snd_hwdep kvm_amd snd_seq kvm snd_seq_device
snd_pcm irqbypass snd_timer ppdev parport_serial snd parport_pc k10temp pcspkr soundcore parport
sp5100_tco shpchp sg wmi i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc
ip_tables xfs libcrc32c sr_mod cdrom sd_mod ata_generic pata_acpi amdkfd amd_iommu_v2 radeon
broadcom bcm_phy_lib i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
ttm ahci serio_raw tg3 firewire_ohci libahci pata_atiixp drm ptp libata firewire_core pps_core
i2c_core crc_itu_t fjes dm_mirror dm_region_hash dm_log dm_mod
[   97.927721] CPU: 1 PID: 3504 Comm: vhost-3495 Not tainted 4.9.0-7.el7.test.x86_64 #1
[   97.935457] Hardware name: AMD Snook/Snook, BIOS ESK0726A 07/26/2010
[   97.941806] task: ffff880129a1c080 task.stack: ffffc90001bcc000
[   97.947720] RIP: 0010:[<ffffffff816e52f9>]  [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[   97.956251] RSP: 0018:ffff88012fc43a10  EFLAGS: 00010207
[   97.961557] RAX: 0000000000000000 RBX: ffff8801292c8700 RCX: 0000000000000594
[   97.968687] RDX: 0000000000000593 RSI: ffff880129a846c0 RDI: 0000000000240000
[   97.975814] RBP: ffff88012fc43a68 R08: ffff880129a8404e R09: 0000000000000000
[   97.982942] R10: 0000000000000000 R11: ffff880129a84076 R12: 00000020002949b3
[   97.990070] R13: ffff88012a580000 R14: 0000000000000000 R15: ffff88012a580000
[   97.997198] FS:  0000000000000000(0000) GS:ffff88012fc40000(0000) knlGS:0000000000000000
[   98.005280] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   98.011021] CR2: 00000000000000cc CR3: 0000000126c5d000 CR4: 00000000000006e0
[   98.018149] Stack:
[   98.020157]  00000000ffffffff ffff88012fc43ac8 ffffffffa017ad0a 000000000000000e
[   98.027584]  0000001300000000 0000000077d59998 ffff8801292c8700 00000020002949b3
[   98.035010]  ffff88012a580000 0000000000000000 ffff88012a580000 ffff88012fc43a98
[   98.042437] Call Trace:
[   98.044879]  <IRQ> [   98.046803]  [<ffffffffa017ad0a>] ? tg3_start_xmit+0x84a/0xd60 [tg3]
[   98.053156]  [<ffffffff815eeee0>] skb_mac_gso_segment+0xb0/0x130
[   98.059158]  [<ffffffff815eefd3>] __skb_gso_segment+0x73/0x110
[   98.064985]  [<ffffffff815ef40d>] validate_xmit_skb+0x12d/0x2b0
[   98.070899]  [<ffffffff815ef5d2>] validate_xmit_skb_list+0x42/0x70
[   98.077073]  [<ffffffff81618560>] sch_direct_xmit+0xd0/0x1b0
[   98.082726]  [<ffffffff815efd86>] __dev_queue_xmit+0x486/0x690
[   98.088554]  [<ffffffff8135c135>] ? cpumask_next_and+0x35/0x50
[   98.094380]  [<ffffffff815effa0>] dev_queue_xmit+0x10/0x20
[   98.099863]  [<ffffffffa09ce057>] br_dev_queue_push_xmit+0xa7/0x170 [bridge]
[   98.106907]  [<ffffffffa09ce161>] br_forward_finish+0x41/0xc0 [bridge]
[   98.113430]  [<ffffffff81627cf2>] ? nf_iterate+0x52/0x60
[   98.118735]  [<ffffffff81627d6b>] ? nf_hook_slow+0x6b/0xc0
[   98.124216]  [<ffffffffa09ce32c>] __br_forward+0x14c/0x1e0 [bridge]
[   98.130480]  [<ffffffffa09ce120>] ? br_dev_queue_push_xmit+0x170/0x170 [bridge]
[   98.137785]  [<ffffffffa09ce4bd>] br_forward+0x9d/0xb0 [bridge]
[   98.143701]  [<ffffffffa09cfbb7>] br_handle_frame_finish+0x267/0x560 [bridge]
[   98.150834]  [<ffffffffa09d0064>] br_handle_frame+0x174/0x2f0 [bridge]
[   98.157355]  [<ffffffff8102fb89>] ? sched_clock+0x9/0x10
[   98.162662]  [<ffffffff810b63b2>] ? sched_clock_cpu+0x72/0xa0
[   98.168403]  [<ffffffff815eccf5>] __netif_receive_skb_core+0x1e5/0xa20
[   98.174926]  [<ffffffff813659f9>] ? timerqueue_add+0x59/0xb0
[   98.180580]  [<ffffffff815ed548>] __netif_receive_skb+0x18/0x60
[   98.186494]  [<ffffffff815ee625>] process_backlog+0x95/0x140
[   98.192145]  [<ffffffff815edccd>] net_rx_action+0x16d/0x380
[   98.197713]  [<ffffffff8170cff1>] __do_softirq+0xd1/0x283
[   98.203106]  [<ffffffff8170b2bc>] do_softirq_own_stack+0x1c/0x30
[   98.209107]  <EOI> [   98.211029]  [<ffffffff8108a5c0>] do_softirq+0x50/0x60
[   98.216166]  [<ffffffff815ec853>] netif_rx_ni+0x33/0x80
[   98.221386]  [<ffffffffa09eeff7>] tun_get_user+0x487/0x7f0 [tun]
[   98.227388]  [<ffffffffa09ef3ab>] tun_sendmsg+0x4b/0x60 [tun]
[   98.233129]  [<ffffffffa0b68932>] handle_tx+0x282/0x540 [vhost_net]
[   98.239392]  [<ffffffffa0b68c25>] handle_tx_kick+0x15/0x20 [vhost_net]
[   98.245916]  [<ffffffffa0abacfe>] vhost_worker+0x9e/0xf0 [vhost]
[   98.251919]  [<ffffffffa0abac60>] ? vhost_umem_alloc+0x40/0x40 [vhost]
[   98.258440]  [<ffffffff81003a47>] ? do_syscall_64+0x67/0x180
[   98.264094]  [<ffffffff810a44d9>] kthread+0xd9/0xf0
[   98.268965]  [<ffffffff810a4400>] ? kthread_park+0x60/0x60
[   98.274444]  [<ffffffff8170a4d5>] ret_from_fork+0x25/0x30
[   98.279836] Code: 8b 93 d8 00 00 00 48 2b 93 d0 00 00 00 4c 89 e6 48 89 df 66 89 93 c2 00 00 00 ff 10 48 3d 00 f0 ff ff 49 89 c2 0f 87 52 01 00 00 <41> 8b 92 cc 00 00 00 48 8b 80 d0 00 00 00 44 0f b7 74 10 06 66
[   98.299425] RIP  [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[   98.305612]  RSP <ffff88012fc43a10>
[   98.309094] CR2: 00000000000000cc
[   98.312406] ---[ end trace 726a2c7a2d2d78d0 ]---
Signed-off-by: NArtem Savkov <asavkov@redhat.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>