The Renesas RZ/A1H manual names the software reset bit in the software reset
register (ARSTR) ARST which makes a bit more sense than the ARSTR_ARSTR name
used now  by the driver -- rename the latter to ARSTR_ARST.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sh_eth_check_reset() uses a bare number where EDMR_SRST_GETHER would fit,
i.e. the receive/trasmit software reset bits that comprise EDMR_SRST_GETHER
read as 1  while the corresponding reset is in progress and thus, when both
are 0, the reset is complete.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G extending mlx5 ethtool support

Changes from V0:
	- Dropped: net/mlx5e: Disable link up on INIT HCA command
	  Due to Ido's and Or's requests we will submit this patch to net and will need it for -stable.
	- Rebased to: 11afbff8 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next")

This series is centralized around extending and improving mlx5 ethernet driver ethtool
support. We've done some code refactoring for ethtool statistics reporting, making it
more scalable and robust, now each reported ethtool counter belongs to a group and has
its own descriptor within that group, the descriptor holds the counter name and offset
in memory in that group memory block.

Added new counters:
	- Reporting more error and drop counter in ifconig/ip tool.
	- Per priority pause and traffic counter in ethtool.
	- link down events counter in ethtool.

Set features handling was also refactored a little bit to be more resilient and generic,
now setting more than one feature will not stop on the first failed one, but instead
it will try to continue setting others. We made it generic to make it simpler for adding
more features support, it is now done easily by only introducing a handler function of
the new supported netdev feature, and let the generic handler do the job.

New netdev features and ethtool support:
	- Netdev feature RXALL, set on/off FCS check offload.
	- Netdev feature HW_VLAN_CTAG_RX, set on/off rx-vlan stripping offload.
	- Ethtool interface identify.
	- Ethtool dump module EEPROM.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now as rx-vlan offload can be disabled, packets can be received
with vlan tag not stripped, which means is_first_ethertype_ip will
return false, for that we need to check if the hardware reported
csum OK so we will report CHECKSUM_UNNECESSARY for those packets.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use ethtool -K <interface> rxvlan <on/off> to enable/disable
C-TAG vlan stripping by hardware.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add query MCIA, PMLP registers infrastructure and commands.
Add ethtool support for get_module_info() and get_module_eeprom()
callbacks.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the needed hardware command and mlx5_ifc structs for managing LED
control.
Add set_phys_id ethtool callback to support ethtool -p flag.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce new access register named Ports Check Mask Register (PCMR) to
control all HW checks on port. With this register, the driver can
enable/disable Hardware FCS validation.

When RXALL is enabled/disabled using ndo_set_features, enable/disable
fcs check at HW.
User can change HW configuration using rx-all flag at ethtool.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In current mlx5e ndo_set_features implementation, setting some features
can success while others can fail. Today, we return one error code which
doesn't reflect the current features status of the netdev at the end of
the ndo callback.

Set netdev->features with features which were successfully set in order
to keep the current status in case of failure. For this purpose, define
new Macro to set/unset specific feature in netdev->features.

This patch introduces a mechanism that uses feature handlers for each
feature.
Set features will call a generic handler, which will then call a specific
handler in his turn and update netdev->features according to it's return
value. Each specific handler is responsible to perform driver specific
actions, and updating params if needed.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Expose link_down_events counter through ethtool -S.
This counter is read from PPort statistics, then proccessed and stored as
a special handling software counter.
This counter is stored along software counters since it is the only PPort
counter that it's size is not 64 bits.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Expose counters providing information for each priority level (PCP) through
ethtool -S option and DCBNL.
This includes rx/tx bytes, frames, and pause counters.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VPort and software counters names are confusing and may be unclear, all
VPort counters now have a prefix of rx/tx_vport_*.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Redesign ethtool statistics handling and reporting in the driver:
1. Move counters to a separate file (en_stats.h).
2. Remove unnecessary dependencies between stats and strings.
3. Use counter descriptors which hold a name and offset for each counter,
   and will be used to decide which counters will be exposed.

For example when adding a new software counter to ethtool, instead of:
1. Add to stats struct.
2. Add to strings struct in the same order.
3. Change macro defining number of software counters.
The only thing needed is to link the new counter to a counter descriptor.

VPort counters are a set of hardware traffic counters created automatically
for each virtual port opened.
PPort counters are a set of counters describing per physical port
performance statistics.
These counters are gathered from hardware register and divided to groups
according to different protocols.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Provide rtnl_link_stats64 with information regarding physical errors to be
seen in ifconfig and ip tool.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
net: core: remove TX_LOCKED support

Not that many users left, lets kill it.

TX_LOCKED was meant to be used by LLTX drivers when spin_trylock()
failed.  Stack then re-queued if collisions happened on different
cpus or free'd the skb to prevent deadlocks.

Most of the driver removal patches fall into one of three categories:
1. remove the driver-private tx lock (and LLTX flag), or...
2. convert spin_trylock to plain spin_lock, or...
3. convert TX_LOCKED to free+TX_OK

Patches are grouped by these categories, last patch is the actual removal.
All driver changes were compile tested only with exception of atl1e.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No more users in the tree, remove NETDEV_TX_LOCKED support.
Adds another hole in softnet_stats struct, but better than keeping
the unused collision counter around.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

replace the trylock by a full spin_lock and remove TX_LOCKED return value.
Followup patch will remove TX_LOCKED from the kernel.

Cc: Jon Mason <jdmason@kudzu.us>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These drivers already call netif_stop_queue() so we should not be called
unless tx space is available.  Just free the skb and return TX_OK.

Followup patch will remove NETDEV_TX_LOCKED from the kernel.

Cc: linux-parisc@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: Thomas Sailer <t.sailer@alumni.ethz.ch>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

similar to atl1c: lock is only used in ndo_start_xmit, but we also
advertised LLTX, so remove that as well and let core stack handle
tx locking.

Allows to remove the TX_LOCKED return value from the driver.

Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AFAICS this is safe: the lock is only used in the .ndo_start_xmit
function and this driver does not set LLTX.

Gets rid of TX_LOCKED return value, followup patches will remove it.

Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ndo_start_xmit never returns it to stack, but nes_nic_send helper used it if
skb could not be queued to hardware.  Switch to bool instead.

Cc: <linux-rdma@vger.kernel.org>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
Don't return NULL from get_phy_device() anymore

   Here's the set of 5 patches against DaveM's 'net-next.git' repo. The first
patch makes get_phy_device() return only error values on error, the rest of
the patches clean up the callers of that function...
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that get_phy_device() no longer returns NULL on error, we don't need
to check for it...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that get_phy_device() no longer returns NULL on error, we don't need
to check for it...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that get_phy_device() no longer returns NULL on error, we don't need
to check for it...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that get_phy_device() no longer returns NULL on error, we don't need
to check for it...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Arnd Bergmann asked that get_phy_device() returns either NULL or the error
value,  not both on error.  Do as he said, return ERR_PTR(-ENODEV) instead
of NULL when the PHY ID registers read as  all ones.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sh_eth_dev_init()  is now always called with  'true' as the  2nd argument,
so that there's no more sense in having 2 parameters to this function...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For sctp assoc, when rcvbuf_policy is set, it will has it's own
rmem_alloc, when we dump asoc info in sctp_diag, we should use that
value on RMEM_ALLOC as well, just like WMEM_ALLOC.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

macvtap_device_event(NETDEV_UNREGISTER) should check vlan->minor to
determine if it is being invoked in the context of a macvtap_newlink
that failed, for example in this code sequence:

macvtap_newlink
  macvlan_common_newlink
    register_netdevice
      call_netdevice_notifiers(NETDEV_REGISTER, dev)
        macvtap_device_event(NETDEV_REGISTER)
          <fail here, vlan->minor = 0>
      rollback_registered(dev);
        rollback_registered_many
          call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
            macvtap_device_event(NETDEV_UNREGISTER)
              <nothing to clean up here>
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If macvlan_common_newlink fails in register_netdevice after macvlan_init
then it decrements port->count twice, first in macvlan_uninit (from
register_netdevice or rollback_registered) and then again in
macvlan_common_newlink.
A similar problem may exist in the ipvlan driver.
This patch consolidates modifications to port->count into macvlan_init
and macvlan_uninit (thanks to Eric Biederman for suggesting this approach).

v3: remove macvtap specific bits.
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Manish Chopra says:

====================
qed: Bandwidth configuration support

This series adds support in driver for min/max bandwidth configuration
for the PF on the link change notification or on explicit request of
bandwidth update from the MFW [management firmware].

The same infrastructure would later be used by user based flows
[for example, rate shaping for the VFs]

Please consider applying this series to "net-next"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for PF minimum bandwidth update
or configuration notified by management firmware.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for PF maximum bandwidth update
or configuration notified by management firmware.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds relevant APIs needed to configure WFQ
(Weighted fair queueing) values for the vports. WFQ configuration
is used per vport basis when minimum bandwidth update/configuration
is notified to the PF by the management firmware.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4: minor fixes, decode msgs and code refactor for few functions

This patch series adds new routine to get adapter information and removes
some redundant messages logged in dmesg. Fixes race while freeing tx
descriptors. Decodes module type and link down reason codes obtained from
firmware. Refactor port initialization and FW_PORT_CMD handling. Pass
correct port id in DCB message handler to obtain netdev associated.

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware can send a set of asynchronous replies through FW_PORT_CMD
with DCBX information when that's negotiated with the Link Peer. The old
code always assumed that a FW_PORT_CMD reply was always a Get Port
Information message. This change conditionalizes the code to only handle
the Get Port Information messages and throws a warning if we don't
understand what we've been given.

Also refactor t4_handle_fw_rpl() so that core functionality performed by
t4_handle_get_port_info() for a specified port.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>