- 23 9月, 2009 2 次提交
-
-
由 Randy Dunlap 提交于
subsys_initcall_sync() is only defined for built-in code, not for loadable modules, so this driver build fails when built as a module. However, the _sync() forms of the initcalls are not implemented, so this should not be used -- just use the non-sync form of it. drivers/usb/otg/twl4030-usb.c:777: warning: data definition has no type or storage class drivers/usb/otg/twl4030-usb.c:777: warning: type defaults to 'int' in declaration of 'subsys_initcall_sync' drivers/usb/otg/twl4030-usb.c:777: warning: parameter names (without types) in function declaration Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
This patch fixes the .probe failure of twl4030_usb driver if it is compiled into kernel. Since twl4030_usb USB transceiver .probe depends on twl4030-regulator, marking twl4030_usb_init as subsys_initcall_sync can make it called after twl4030-regulator initialization is finished, then twl4030_usb USB transceiver driver can be probed successfully. Signed-off-by: NMing Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 16 6月, 2009 2 次提交
-
-
由 David Brownell 提交于
Fix a reporting glitch in the twl4030 USB transceiver code. It wasn't properly distinguishing the two types of active USB link: ID grounded, vs not. In the current code that distinction doesn't much matter; in the future this bugfix should help support better USB controller communications. Provide a comment sorting out some of the cryptic bits of the manual: different sections use different names for key signals, and the register definitions don't help much without the explanations and diagrams. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Kleine-König 提交于
A pointer to twl4030_usb_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Jouni Hogander <jouni.hogander@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 3月, 2009 1 次提交
-
-
由 Jouni Hogander 提交于
This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1 when the USB cable is unplugged to reduce power consumption. Added a depencency from twl4030 usb driver to TWL_REGULATOR. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 1月, 2009 1 次提交
-
-
由 David Brownell 提交于
Add driver for the high speed USB-OTG transceiver in TI's TWL4030 family of chips. Given this and various other pending patches, OMAP3 hardware like that from beagleboard.org, gumstix.com (Overo), and openpandora.org should now have basic USB host and peripheral connectivity with mainline kernels. Ditto for less widely-available boards. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NTony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-