The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in which
the sizeof operator is being incorrectly/erroneously applied to zero-length
arrays and the result is zero. Such instances may be hiding some bugs. So,
this work (flexible-array member conversions) will also help to get
completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")

Link: https://lore.kernel.org/r/20200507192550.GA16683@embeddedorSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The write performance of TLC NAND is considerably lower than SLC NAND.
Using SLC NAND as a WriteBooster Buffer enables the write request to be
processed with lower latency and improves the overall write performance.

Adds support for shared-buffer mode WriteBooster.

WriteBooster enable: SW enables it when clocks are scaled up, thus it's
enabled only in high load conditions.

WriteBooster disable: SW will disable the feature, when clocks are scaled
down. Thus writes would go as normal writes.

To keep the endurance of the WriteBooster Buffer at a maximum, this
load-based toggling is adopted.

Link: https://lore.kernel.org/r/2871444d9083b0e9323ef6d8ff1b544b7784adc9.1587591527.git.asutoshd@codeaurora.orgReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/ufs/ufshcd.c:4140:6-14: WARNING: Assignment of 0/1 to bool
variable.

Link: https://lore.kernel.org/r/20200426094305.24083-1-yanaijie@huawei.comSigned-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During suspend, if the link is put to off, it would require a full
initialization during resume. This patch resets and restores both the host
and the card during initialization, otherwise host-only reset and restore
would fail occasionally.

Link: https://lore.kernel.org/r/1586844892-22720-1-git-send-email-cang@codeaurora.orgReviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Acked-by: NStanley Chu <stanley.chu@mediatek.com>
Acked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When scaling gear, use ufshcd_config_pwr_mode() instead of
ufshcd_change_power_mode() so that vops_pwr_change_notify(PRE_CHANGE)
can be utilized to allow vendors use customized settings before
changing power mode.

Link: https://lore.kernel.org/r/1581485910-8307-2-git-send-email-cang@codeaurora.orgReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently ufshcd driver assumes that bInitPowerMode parameter is not
changed by any vendors thus device power mode can be set as "Active" during
initialization.

According to UFS JEDEC specification, device power mode shall be "Active"
after HW Reset is triggered if the bInitPowerMode parameter in Device
Descriptor is default value.

By above description, we can set device power mode as "Active" after device
reset is triggered by vendor's callback. With this change, the link startup
performance can be improved in some cases by not setting link_startup_again
as true in ufshcd_link_startup().

Link: https://lore.kernel.org/r/20200327095835.10293-1-stanley.chu@mediatek.comReviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Export ufshcd_link_recovery to allow vendors to recover failed link in
vendor's callbacks.

Link: https://lore.kernel.org/r/20200327095329.10083-2-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This change introduces a func ufshcd_set_clk_freq() to explicitly set clock
frequency so that it can be used in reset_and_restore path and in
ufshcd_scale_clks(). This change also cleans up the clock scaling error out
path.

[mkp: commit desc]

Link: https://lore.kernel.org/r/1585214742-5466-2-git-send-email-cang@codeaurora.org
Fixes: a3cd5ec5 ("scsi: ufs: add load based scaling of UFS gear")
Reviewed-by: NBean Huo <beanhuo@micron.com>
Acked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We were setting bActiveICCLevel attribute for UFS device only once but the
type of this attribute has changed from persistent to volatile since UFS
device specification v2.1. This attribute is set to the default value after
power cycle or hardware reset event. It isn't safe to rely on prefetched
data (only used for bActiveICCLevel attribute now). Hence this change
removes the code related to data prefetching and set this parameter on
every attempt to probe the UFS device.
Tested-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Block layer RPM is enabled for the genernal UFS SCSI devices when they are
probed by their driver. However block layer RPM is not enabled for UFS
well-known SCSI devices.

As UFS SCSI devices have their corresponding BSG char devices, accessing a
BSG char device via IOCTL may send requests to its corresponding SCSI
device through its request queue. If BSG IOCTL sends a request to a
well-known SCSI device when HBA is not runtime active, due to block layer
RPM not being enabled for the well-known SCSI devices, the HBA, which is at
the top of a SCSI device's parent chain, will not be resumed.

This change enables block layer RPM for the well-known SCSI devices so that
block layer can handle RPM for the well-known SCSI devices just like for
the general SCSI devices.
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Vendor drivers may have a need to update the polling interval and
thresholds.  Provide a vops for vendor drivers to use.

Link: https://lore.kernel.org/r/acd79e00396cff855256adad47f615ccdbde85ac.1585160616.git.asutoshd@codeaurora.orgAcked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, the frequency that devfreq provides the driver always leads the
clocks to be scaled up.  Hence, round the clock-rate to the nearest
frequency before deciding to scale.

Also update the devfreq statistics of current frequency.

Link: https://lore.kernel.org/r/d0c6c22455811e9f0eda01f9bc70d1398b51b2bd.1585160616.git.asutoshd@codeaurora.orgAcked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reduce the waiting period between each HCE (Host Controller Enable) polling
from 5 ms to 1 ms. Also increase the maximum polling times to make "total
polling time" roughly the same.

This change could make HCE initialization faster to improve latency of
ufshcd initialization, error recovery, and resume behaviors.

Link: https://lore.kernel.org/r/20200318104016.28049-7-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE
bit. This delay may not be required or can be changed in different
controllers. Make the delay as a changeable value in struct ufs_hba to
allow it customized by vendors.

Link: https://lore.kernel.org/r/20200318104016.28049-6-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Introduce a common delay function to provide flexible way for users to take
choices of udelay and usleep_range into consideration according to the
required delay time.

Link: https://lore.kernel.org/r/20200318104016.28049-4-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In ufshcd_disable_tx_lcc(), if ufshcd_dme_get() or ufshcd_dme_peer_get()
get fail, uninitialized variable "tx_lanes" may be used as unexpected lane
ID for DME configuration.

Fix this issue by initializing "tx_lanes".

Link: https://lore.kernel.org/r/20200318104016.28049-2-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Before access auto hibner8 timer register, make sure power and clock are
properly configured to avoid unclocked register access.

Link: https://lore.kernel.org/r/1583398391-14273-1-git-send-email-cang@codeaurora.org
Fixes: ba7af5ec ("scsi: ufs: export ufshcd_auto_hibern8_update for vendor usage")
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

lrbp->cmd is set only for SCSI commands. Use this knowledge to simplify two
boolean expressions.

Link: https://lore.kernel.org/r/20200123035637.21848-4-bvanassche@acm.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality but makes the next patch in
this series easier to read.

Link: https://lore.kernel.org/r/20200123035637.21848-3-bvanassche@acm.org
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently ufshcd_vops_apply_dev_quirks() comes after all UniPro parameters
have been tuned. Move it up so that vendors have a chance to apply device
quirks in advance.

Link: https://lore.kernel.org/r/1582517363-11536-2-git-send-email-cang@codeaurora.orgReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove various quirks that don't have users, as well as the dead code keyed
off them.

Link: https://lore.kernel.org/r/20200221140812.476338-2-hch@lst.deReviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In UFS version 3.0, a newly added attribute bRefClkGatingWaitTime defines
the minimum time for which the reference clock is required by device during
transition to LS-MODE or HIBERN8 state. Make this change to reflect the new
requirement by adding delays before turning off the clock.

Link: https://lore.kernel.org/r/1581392451-28743-7-git-send-email-cang@codeaurora.orgReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.

Fixes: f2a785ac ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.orgReviewed-by: NHongwu Su <hongwus@codeaurora.org>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The functionality of vendor specific ops should be handled properly in
platform specific driver, but should not count on the UFS driver.

Link: https://lore.kernel.org/r/1581392451-28743-5-git-send-email-cang@codeaurora.orgReviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This sequence change is required to avoid dips in voltage during boot-up.

Apparently, this dip is caused because in the original sequence, the
regulators are initialized in lpm mode.  And then when the load is set to
high, and more current is drawn, than is allowed in lpm, the dip is seen.

Link: https://lore.kernel.org/r/1581392451-28743-3-git-send-email-cang@codeaurora.orgReviewed-by: NHongwu Su <hongwus@codeaurora.org>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Exception event can be raised by the device when system suspend is in
progress. This will result in unclocked register access in exception event
handler as clocks will be turned off during suspend. This change makes sure
to flush exception event handler work in suspend before disabling clocks to
avoid unclocked register access issue.

Link: https://lore.kernel.org/r/1581392451-28743-2-git-send-email-cang@codeaurora.orgReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NSayali Lokhande <sayalil@codeaurora.org>
Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if
Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is
supported by host but not actually enabled, Auto-Hibern8 error shall not
happen.

To fix this, provide a way to detect if Auto-Hibern8 is actually enabled
first, and bypass Auto-Hibern8 disabling case in
ufshcd_is_auto_hibern8_error().

Fixes: 82174440 ("scsi: ufs: Add error-handling of Auto-Hibernate")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

According to Jedec standard UFS 3.0 and UFS 2.1 Spec, Maximum number of
logical units supported by the UFS device is indicated by parameter
bMaxNumberLU in Geometry Descriptor. This patch is to delete current hard
code macro definition of UFS_UPIU_MAX_GENERAL_LUN, and switch to use device
indicated number instead.

Link: https://lore.kernel.org/r/20200120130820.1737-9-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add one new parameter max_lu_supported in struct ufs_dev_info, which will
be used to express exactly how many general LUs being supported by UFS
device, and initialize it during booting stage.  This patch also adds a new
function ufshcd_device_geo_params_init() for initialization of UFS device
geometry descriptor related parameters.

Link: https://lore.kernel.org/r/20200120130820.1737-8-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Without variable is_init_prefetch, the current logic can guarantee
ufshcd_init_icc_levels() will execute only once, delete it now.

Link: https://lore.kernel.org/r/20200120130820.1737-7-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Delete ufshcd_read_power_desc() and ufshcd_read_device_desc(), directly
inline ufshcd_read_desc() into its callers.

Link: https://lore.kernel.org/r/20200120130820.1737-6-huobean@gmail.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ufshcd_get_max_pwr_mode() only need to be called once while booting, take
it out from ufshcd_probe_hba() and inline into ufshcd_device_params_init().

Link: https://lore.kernel.org/r/20200120130820.1737-5-huobean@gmail.comReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch has two major non-functionality changes:

1. Take scanning host if-statement out from ufshcd_probe_hba(), and move
into a new added function ufshcd_add_lus().  In this new function
ufshcd_add_lus(), the main functionalitis include: ICC initialization, add
well-known LUs, devfreq initialization, UFS bsg probe and scsi host
scan. The reason for this change is that these functionalities only being
called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the
processes of error handling and power management ufshcd_suspend(),
ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis
above metioned are not hit.

2. Move context of initialization of parameters associated with the UFS
device to a new added function ufshcd_device_params_init().  The reason of
this change is that all of these parameters are used by driver, but only
need to be initialized once when booting. Combine them into an integral
function, make them easier maintain.

Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In consideration of UFS host driver uses parameters of struct ufs_dev_desc,
move its parameters to struct ufs_dev_info, delete struct ufs_dev_desc.

Link: https://lore.kernel.org/r/20200120130820.1737-3-huobean@gmail.comReviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in
case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this
value, and doesn't report this failure to upper caller.  This patch is to
fix this issue.

Fixes: 2a8fa600 ("ufs: manually add well known logical units")
Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Export below functions for vendor usage:

int ufshcd_hba_enable(struct ufs_hba *hba);
int ufshcd_make_hba_operational(struct ufs_hba *hba);
int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);

Link: https://lore.kernel.org/r/20200117035108.19699-3-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Pass UFS device information to vendor-specific variant callback
"apply_dev_quirks" because some platform vendors need to know such
information to apply special handling or quirks in specific devices.

At the same time, modify existing vendor implementations according to the
new interface for those vendor drivers which will be built-in or built as a
module alone with UFS core driver.

[mkp: clarified commit desc]

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove "errors" word in output string by ufshcd_print_err_hist() since not
all printed targets are "errors". Sometimes they are just "events".

In addition, all events which can be treated as "errors" already have "err"
or "fail" words in their names.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-4-git-send-email-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Device reset history shall be also added for vendor's device reset variant
operation implementation.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently checking if an error history element is empty or not is by its
"value". In most cases, value is error code.

However this checking is not correct because some errors or events do not
specify any values in error history so values remain as 0, and this will
lead to incorrect empty checking.

Fix it by checking "timestamp" instead of "value" because timestamp will be
always assigned for all history elements

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>