- 30 9月, 2020 6 次提交
-
-
由 Wesley Chalmers 提交于
[WHY] At the moment, some tests are failing because cur_link_settings is invalid. As a workaround, add an option to force dio disable. Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: NMartin Leung <Martin.Leung@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Joshua Aberback 提交于
[Why] Currently, when full p-state changes are not supported, DLG parameters are calculated for no p-state support at all. However, we are required to always support dummy p-state changes, so we should instead calculate DLG based on dummy p-state latency when full p-state is unsupported. This behaviour already exists for DCN2. [How] - move DLG calculation inside WM calculation - if p-state unsupported, do not recalculate for set A, instead copy from set C, and perform DLG calculation with dummy p-state latency Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com> Reviewed-by: NJun Lei <Jun.Lei@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chiawen Huang 提交于
[Why] Vbios uses preferred timing to turn on edp but OS could use other timing. If change pixel clock when link active, there is unexpected garbage on monitor. [How] Once pixel clock changed, the driver needs to disable stream. Signed-off-by: NChiawen Huang <chiawen.huang@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Wyatt Wood 提交于
[Why] Some debug bits are not being copied from driver to fw. [How] Copy debug bits properly. Signed-off-by: NWyatt Wood <wyatt.wood@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Bernstein 提交于
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alvin Lee 提交于
[Why] HW team measurement requires updating values [How] Update bounding box values Signed-off-by: NAlvin Lee <alvin.lee2@amd.com> Reviewed-by: NJun Lei <Jun.Lei@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 26 9月, 2020 16 次提交
-
-
由 Evan Quan 提交于
Revert the guilty change introduced by the commit below: drm/amd/pm: postpone SOCCLK/UCLK enablement after DAL initialization(V2) Signed-off-by: NEvan Quan <evan.quan@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result] 1284 | sysfs_create_group(&adev->dev->kobj, &group); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ v2: just print an error for sysfs group creation failure Acked-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Guchun Chen 提交于
Merge ras sysfs creation together by calling sysfs_create_group once, as sysfs_update_group may not work properly as expected. v2: improve commit message Signed-off-by: NGuchun Chen <guchun.chen@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NDennis Li <Dennis.Li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tiecheng Zhou 提交于
In FLR routine, init_data_exchange is called at reset_sriov while fini_data_exchange is not. This will duplicating work thread. So call fini_data_exchange before reset for SRIOV Signed-off-by: NTiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bokun Zhang 提交于
- Refactor the driver code to use amdgpu_virt_read_pf2vf_data and amdgpu_virt_write_vf2pf_data instead of writing all code in one function (which is the old amdgpu_virt_init_data_exchange) - Adding a new transaction method for VF2PF message between host and guest driver. Guest side will periodically update VF2PF message in the framebuffer. In the new header, we include guest ucode information, guest framebuffer usage, and engine usage - Clean up the old macros since they will cause compile error if the new transaction method is used v2: squash in build fix Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bokun Zhang 提交于
- Update guest side VF2PF interface header file Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ryan Taylor 提交于
Documents PP_FEATURE_MASK enum. Provides instructions on how to use ppfeaturemasks. v2: improve enum definitions and add kernel command line parameters to ppfeaturemask instructions v3: fix alignment issues Signed-off-by: NRyan Taylor <ryan.taylor@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
disable UMC RAS in lieu of stability issues on certain sku Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NJohn Clements <john.clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This allows us to set different defaults on a per asic basis. This way we can enable noretry on dGPUs where it can increase performance in certain cases and disable it on chips where it can be problematic. For now the default is 0 for all asics, but we may want to try and enable it again for newer dGPUs. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This will allow us to have different defaults per asic in a future patch. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Properly handle clang and older versions of gcc. Fixes: e77165bf ("drm/amd/display: Add DCN3 blocks to Makefile") Acked-by: NNirmoy Das <nirmoy.das@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Emily.Deng 提交于
Signed-off-by: NEmily.Deng <Emily.Deng@amd.com> Reviewed-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jingwen Chen 提交于
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to accelerate sw_init for navi12. v2: skip above fw in SRIOV for vega10 and sienna_cichlid v3: directly skip psp fw loading in SRIOV Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: NEmily.Deng <Emily.Deng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jingwen Chen 提交于
smc fw is not needed in SRIOV, thus driver should not try to get smc fw data. Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: NEmily.Deng <Emily.Deng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Flora Cui 提交于
max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR Signed-off-by: NFlora Cui <flora.cui@amd.com> Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jiansong Chen 提交于
Remove gpu_info fw support for sienna_cichlid etc., since the information can be retrieved from discovery binary. Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: NLikun Gao <Likun.Gao@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 23 9月, 2020 18 次提交
-
-
由 Wang Qing 提交于
Modify the comment typo: "definately" -> "definitely". Signed-off-by: NWang Qing <wangqing@vivo.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bernard Zhao 提交于
In the function dal_ddc_service_query_ddc_data, get rid of dal_ddc_i2c_payloads_destroy, call dal_vector_destruct() directly. This change is to make the code run a bit fast. Signed-off-by: NBernard Zhao <bernard@vivo.com> Changes since V1: *get rid of dal_ddc_i2c_payloads_destroy, call dal_vector_destruct() directly. Link for V1: *https://lore.kernel.org/patchwork/patch/1309014/Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bernard Zhao 提交于
Change the comment typo: "programm" -> "program". Signed-off-by: NBernard Zhao <bernard@vivo.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bernard Zhao 提交于
Change the comment typo: "programm" -> "program". Signed-off-by: NBernard Zhao <bernard@vivo.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ryan Taylor 提交于
Added IP block section to amdgpu.rst. Added more documentation to amd_ip_funcs. Created documentation for amd_ip_block_type. v2: Provides a more detailed DOC section on IP blocks v3: Clarifies the IP block list. Adds info on IP block enumeration. Signed-off-by: NRyan Taylor <ryan.taylor@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Stanley.Yang 提交于
mmHDP_READ_CACHE_INVALIDATE register is in HDP not in NBIO Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Likun Gao 提交于
Update driver if file for sienna cichlid. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
As this is already set inside the implementation of smu_set_watermarks_table(). Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
As they have no real dependence. And for Navi1x, the socclk/uclk dpms are enabled after DAL initialization. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Otherwise, that will be always true for Navi14. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Stanley.Yang 提交于
GCEA/MMHUB EA error should not result to DF freeze, this is fixed in next generation, but for some reasons the GCEA/MMHUB EA error will result to DF freeze in previous generation, diver should avoid to indicate GCEA/MMHUB EA error as hw fatal error in kernel message by read GCEA/MMHUB err status registers. Changed from V1: make query_ras_error_status function more general make read mmhub er status register more friendly Changed from V2: move ras error status query function into do_recovery workqueue Changed from V3: remove useless code from V2, print GCEA error status instance number Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Sudheesh Mavila 提交于
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM. Suggested-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NSudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Different mclk dpm policy will be applied based on the VRAM width. Signed-off-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Liu Shixin 提交于
Simplify the return expression. Signed-off-by: NLiu Shixin <liushixin2@huawei.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Liu Shixin 提交于
Simplify the return expression. Signed-off-by: NLiu Shixin <liushixin2@huawei.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Qinglang Miao 提交于
Simplify the return expression. Signed-off-by: NQinglang Miao <miaoqinglang@huawei.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Qinglang Miao 提交于
Simplify the return expression. Signed-off-by: NQinglang Miao <miaoqinglang@huawei.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lewis Huang 提交于
[Why] Update clock only when non-seamless boot stream exists creates regression on multiple scenerios. [How] Update clock in two conditions 1. Non-seamless boot stream exist. 2. Stream_count = 0 Fixes: 598c13b2 ("drm/amd/display: update clock when non-seamless boot stream exist") Signed-off-by: NLewis Huang <Lewis.Huang@amd.com> Reviewed-by: NMartin Leung <Martin.Leung@amd.com> Acked-by: NQingqing Zhuo <Qingqing.zhuo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org>
-