and add negotiate request type to let set_credits know that
we are only on negotiate stage and no need to make a decision
about disabling echos and oplocks.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Use SMB2 header size values for allocation and memset because they
are bigger and suitable for both CIFS and SMB2.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Now we can process SMB2 messages: check message, get message id
and wakeup awaiting routines.
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Commit 30d90494 caused a regression
in cifs open codepath.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

For SMB2 protocol we can add more than one credit for one received
request: it depends on CreditRequest field in SMB2 response header.
Also we divide all requests by type: echoes, oplocks and others.
Each type uses its own slot pull.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Add mapping table for 32 bit SMB2 status codes to linux errors.
Note that SMB2 does not use DOS/OS2 errors (ever) so mapping to
DOS/OS2 errors as a common network subset (as we do for cifs)
doesn't help. And note that the set of status codes is much more
complete here.
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

and consider such codes as CIFS errors.
Reviewed-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

and rename variables around the code changes.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Split all requests to echos, oplocks and others - each group uses
its own credit slot. This is indicated by new flags

CIFS_ECHO_OP and CIFS_OBREAK_OP

that are not used now for CIFS. This change is required to support
SMB2 protocol because of different processing of these commands.
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

sec=ntlmv2 as a mount option got dropped in the mount option overhaul.

Cc: Sachin Prabhu <sprabhu@redhat.com>
Cc: <stable@vger.kernel.org> # 3.4+
Reported-by: NGünter Kukkukk <linux@kukkukk.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

"smb2" makes me think of the SMB2.x protocol, which isn't at all what
this function is for...
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

There's a comment here about how we don't want to modify this length,
but nothing in this function actually does.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

struct file_lock is pretty large, so we really don't want that on the
stack in a potentially long call chain. Reorganize the arguments to
CIFSSMBPosixLock to eliminate the need for that.

Eliminate the get_flag and simply use a non-NULL pLockInfo to indicate
that this is a "get" operation. In order to do that, need to add a new
loff_t argument for the start_offset.
Reported-by: NAl Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Those macros add a newline on their own, so there's not any need to
embed one in the message itself.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Calling key_revoke here isn't ideal as further requests for the key will
end up returning -EKEYREVOKED until it gets purged from the cache. What we
really intend here is to force a new upcall on the next request_key.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.)
are done after converting the long to an int.  Thus some illegal values
may be let through and cause problems in later code.

[ They actually *don't* cause problems in mainline, as of Dave Jones's
  commit 8d657eb3 "Remove easily user-triggerable BUG from
  generic_setlease", but we should fix this anyway.  And this patch will
  be necessary to fix real bugs on earlier kernels. ]

Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull the big VFS changes from Al Viro:
 "This one is *big* and changes quite a few things around VFS.  What's in there:

   - the first of two really major architecture changes - death to open
     intents.

     The former is finally there; it was very long in making, but with
     Miklos getting through really hard and messy final push in
     fs/namei.c, we finally have it.  Unlike his variant, this one
     doesn't introduce struct opendata; what we have instead is
     ->atomic_open() taking preallocated struct file * and passing
     everything via its fields.

     Instead of returning struct file *, it returns -E...  on error, 0
     on success and 1 in "deal with it yourself" case (e.g.  symlink
     found on server, etc.).

     See comments before fs/namei.c:atomic_open().  That made a lot of
     goodies finally possible and quite a few are in that pile:
     ->lookup(), ->d_revalidate() and ->create() do not get struct
     nameidata * anymore; ->lookup() and ->d_revalidate() get lookup
     flags instead, ->create() gets "do we want it exclusive" flag.

     With the introduction of new helper (kern_path_locked()) we are rid
     of all struct nameidata instances outside of fs/namei.c; it's still
     visible in namei.h, but not for long.  Come the next cycle,
     declaration will move either to fs/internal.h or to fs/namei.c
     itself.  [me, miklos, hch]

   - The second major change: behaviour of final fput().  Now we have
     __fput() done without any locks held by caller *and* not from deep
     in call stack.

     That obviously lifts a lot of constraints on the locking in there.
     Moreover, it's legal now to call fput() from atomic contexts (which
     has immediately simplified life for aio.c).  We also don't need
     anti-recursion logics in __scm_destroy() anymore.

     There is a price, though - the damn thing has become partially
     asynchronous.  For fput() from normal process we are guaranteed
     that pending __fput() will be done before the caller returns to
     userland, exits or gets stopped for ptrace.

     For kernel threads and atomic contexts it's done via
     schedule_work(), so theoretically we might need a way to make sure
     it's finished; so far only one such place had been found, but there
     might be more.

     There's flush_delayed_fput() (do all pending __fput()) and there's
     __fput_sync() (fput() analog doing __fput() immediately).  I hope
     we won't need them often; see warnings in fs/file_table.c for
     details.  [me, based on task_work series from Oleg merged last
     cycle]

   - sync series from Jan

   - large part of "death to sync_supers()" work from Artem; the only
     bits missing here are exofs and ext4 ones.  As far as I understand,
     those are going via the exofs and ext4 trees resp.; once they are
     in, we can put ->write_super() to the rest, along with the thread
     calling it.

   - preparatory bits from unionmount series (from dhowells).

   - assorted cleanups and fixes all over the place, as usual.

  This is not the last pile for this cycle; there's at least jlayton's
  ESTALE work and fsfreeze series (the latter - in dire need of fixes,
  so I'm not sure it'll make the cut this cycle).  I'll probably throw
  symlink/hardlink restrictions stuff from Kees into the next pile, too.
  Plus there's a lot of misc patches I hadn't thrown into that one -
  it's large enough as it is..."

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits)
  ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file()
  btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file()
  switch dentry_open() to struct path, make it grab references itself
  spufs: shift dget/mntget towards dentry_open()
  zoran: don't bother with struct file * in zoran_map
  ecryptfs: don't reinvent the wheels, please - use struct completion
  don't expose I_NEW inodes via dentry->d_inode
  tidy up namei.c a bit
  unobfuscate follow_up() a bit
  ext3: pass custom EOF to generic_file_llseek_size()
  ext4: use core vfs llseek code for dir seeks
  vfs: allow custom EOF in generic_file_llseek code
  vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes
  vfs: Remove unnecessary flushing of block devices
  vfs: Make sys_sync writeout also block device inodes
  vfs: Create function for iterating over block devices
  vfs: Reorder operations during sys_sync
  quota: Move quota syncing to ->sync_fs method
  quota: Split dquot_quota_sync() to writeback and cache flushing part
  vfs: Move noop_backing_dev_info check from sync into writeback
  ...

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.6:

  Core:
   - Rename cd-gpio to slot-gpio and extend it to support more slot GPIO
     functions, such as write-protect.
   - Add a function to get regulators (Vdd and Vccq) for a host.

  Drivers:
   - sdhci-pxav2, sdhci-pxav3: Add device tree support.
   - sdhi: Add device tree support.
   - sh_mmcif: Add support for regulators, device tree, slot-gpio.
   - tmio: Add regulator support, use slot-gpio."

* tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (62 commits)
  mmc: sdhci-dove: Prepare for common clock framework
  mmc: sdhci-dove: Add SDHCI_QUIRK_NO_HISPD_BIT
  mmc: omap_hsmmc: ensure probe returns error upon resource failure
  mmc: mxs-mmc: Add wp-inverted property
  mmc: esdhc: Fix DMA_MASK to not break mx25 DMA access
  mmc: core: reset signal voltage on power up
  mmc: sd: Fix sd current limit setting
  mmc: omap_hsmmc: add clk_prepare and clk_unprepare
  mmc: sdhci: When a UHS switch fails, cycle power if regulator is used
  mmc: atmel-mci: modify CLKDIV displaying in debugfs
  mmc: atmel-mci: fix incorrect setting of host->data to NULL
  mmc: sdhci: poll for card even when card is logically unremovable
  mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMER
  mmc: sdio: Change pr_warning to pr_warn_ratelimited
  mmc: core: Simplify and fix for SD switch processing
  mmc: sdhci: restore host settings when card is removed
  mmc: sdhci: fix incorrect command used in tuning
  mmc: sdhci-pci: CaFe has broken card detection
  mmc: sdhci: Report failure reasons for all cases in sdhci_add_host()
  mmc: s3cmci: Convert s3cmci driver to gpiolib API
  ...

Pull x86/mce changes from Ingo Molnar:
 "This tree improves the AMD thresholding bank code and includes a
  memory fault signal handling fixlet."

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix siginfo_t->si_addr value for non-recoverable memory faults
  x86, MCE, AMD: Update copyrights and boilerplate
  x86, MCE, AMD: Give proper names to the thresholding banks
  x86, MCE, AMD: Make error_count read only
  x86, MCE, AMD: Cleanup reading of error_count
  x86, MCE, AMD: Print decimal thresholding values
  x86, MCE, AMD: Move shared bank to node descriptor
  x86, MCE, AMD: Remove local_allocate_... wrapper
  x86, MCE, AMD: Remove shared banks sysfs linking
  x86, amd_nb: Export model 0x10 and later PCI id

As mach-dove is moving towards common clock framework prepare
the sdhci driver to grab its clock.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

The sdio controller on dove doesn't have a bit to indicate
high-speed. With the quirk set it fixes accessing high-speed
sdcards.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

If platform_get_resource_by_name() fails, driver probe is aborted an
should return an error so the driver is not bound to the device.

However, in the current error path of platform_get_resource_by_name(),
probe returns zero since the return value (ret) is not properly set.
With a zero return value, the driver core assumes probe was successful
and will bind the driver to the device.

Fix this by ensuring that probe returns an error code in this failure
path.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Acked-by: NVenkatraman S <svenkatr@ti.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

The write-protect GPIO is inverted on some boards. Handle such case.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NChris Ball <cjb@laptop.org>

Patch to not set reserved bits in i.MX25 PROCTL register.  DMA stops
working if those bits get set.
Signed-off-by: NWilson Callan <wilson.callan@savantsystems.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NChris Ball <cjb@laptop.org>

Pull power management updates from Rafael Wysocki:

 - ACPI conversion to PM handling based on struct dev_pm_ops.
 - Conversion of a number of platform drivers to PM handling based on
   struct dev_pm_ops and removal of empty legacy PM callbacks from a
   couple of PCI drivers.
 - Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti
   Murthy.
 - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross.
 - Generic PM domains framework updates.
 - RTC CMOS wakeup signaling update from Paul Fox.
 - sparse warnings fixes from Sachin Kamat.
 - Build warnings fixes for the generic PM domains framework and PM
   sysfs code.
 - sysfs switch for printing device suspend times from Sameer Nanda.
 - Documentation fix from Oskar Schirmer.

* tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
  cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch
  EXYNOS: bugfix on retrieving old_index from freqs.old
  PM / Sleep: call early resume handlers when suspend_noirq fails
  PM / QoS: Use NULL pointer instead of plain integer in qos.c
  PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
  PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
  PM / Sleep: Add missing static storage class specifiers in main.c
  cpuilde / ACPI: remove time from acpi_processor_cx structure
  cpuidle / ACPI: remove usage from acpi_processor_cx structure
  cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure
  rtc-cmos: report wakeups from interrupt handler
  PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
  PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
  olpc-xo15-sci: Use struct dev_pm_ops for power management
  PM / Domains: Replace plain integer with NULL pointer in domain.c file
  PM / Domains: Add missing static storage class specifier in domain.c file
  PM / crypto / ux500: Use struct dev_pm_ops for power management
  PM / IPMI: Remove empty legacy PCI PM callbacks
  tpm_nsc: Use struct dev_pm_ops for power management
  tpm_tis: Use struct dev_pm_ops for power management
  ...

Pull target updates from Nicholas Bellinger:
 "There have been lots of work in a number of areas this past round.
  The highlights include:

   - Break out target_core_cdb.c emulation into SPC/SBC ops (hch)
   - Add a parse_cdb method to target backend drivers (hch)
   - Move sync_cache + write_same + unmap into spc_ops (hch)
   - Use target_execute_cmd for WRITEs in iscsi_target + srpt (hch)
   - Offload WRITE I/O backend submission in tcm_qla2xxx + tcm_fc (hch +
     nab)
   - Refactor core_update_device_list_for_node() into enable/disable
     funcs (agrover)
   - Replace the TCM processing thread with a TMR work queue (hch)
   - Fix regression in transport_add_device_to_core_hba from TMR
     conversion (DanC)
   - Remove racy, now-redundant check of sess_tearing_down with qla2xxx
     (roland)
   - Add range checking, fix reading of data len + possible underflow in
     UNMAP (roland)
   - Allow for target_submit_cmd() returning errors + convert fabrics
     (roland + nab)
   - Drop bogus struct file usage for iSCSI/SCTP (viro)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (54 commits)
  iscsi-target: Drop bogus struct file usage for iSCSI/SCTP
  target: NULL dereference on error path
  target: Allow for target_submit_cmd() returning errors
  target: Check number of unmap descriptors against our limit
  target: Fix possible integer underflow in UNMAP emulation
  target: Fix reading of data length fields for UNMAP commands
  target: Add range checking to UNMAP emulation
  target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE
  target: Make unnecessarily global se_dev_align_max_sectors() static
  target: Remove se_session.sess_wait_list
  qla2xxx: Remove racy, now-redundant check of sess_tearing_down
  target: Check sess_tearing_down in target_get_sess_cmd()
  sbp-target: Consolidate duplicated error path code in sbp_handle_command()
  target: Un-export target_get_sess_cmd()
  qla2xxx: Get rid of redundant qla_tgt_sess.tearing_down
  target: Make core_disable_device_list_for_node use pre-refactoring lock ordering
  target: refactor core_update_device_list_for_node()
  target: Eliminate else using boolean logic
  target: Misc retval cleanups
  target: Remove hba param from core_dev_add_lun
  ...

Pull regulator updates from Mark Brown:
 "Lots and lots of fixes from Axel and some others here, plus some
  framework enhancements which continue the theme of factoring code out
  of the drivers and into the core.

   - Initial framework support for GPIO controlled enable signals,
     saving a bunch of code in drivers.
   - Move fixed regulator enable time and voltage mapping table
     specifications to data.
   - Used some of the recent framework enhancements to make voltage
     change notifications more useful, passing the voltage in as an
     argument to the notification.
   - Fixed the pattern used for finding individual regulators on a
     device to not rely on the node name, supporting the use of multiple
     PMICs of the same type in the system.
   - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung
     S2MPS11, and Wolfson Arizona microphone supplies and LDOs."

* tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits)
  regulator: add new lp8788 regulator driver
  regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator
  regulator: tps65910: set input_supply on desc unconditionally
  regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps
  regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data()
  regulator: twl: Fix list_voltate for twl6030ldo_ops
  regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel
  regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo
  regulator: s5m8767: Properly handle gpio_request failure
  regulator: max8997: Properly handle gpio_request failure
  regulator: tps62360: use devm_* for gpio request
  regulator: tps6586x: add support for input supply
  regulator: tps65217: Add device tree support
  regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator
  regulator: aat2870: Convert to regulator_list_voltage_table
  regulator: da9052: initialize of_node param for regulator register
  regulator: Add REGULATOR_STATUS_UNDEFINED.
  regulator: Fix a typo in regulator_mode_to_status() core function.
  regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff
  regulator: s2mps11: Fix wrong setting for config.dev
  ...

Pull regmap updates from Mark Brown:
 "A few fixes plus a few features, the most generally useful thing being
  the register paging support which can be used by quite a few devices:

   - Support for wake IRQs in regmap-irq
   - Support for register paging
   - Support for explicitly specified endianness, mostly for MMIO."

* tag 'regmap-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix incorrect arguments to kzalloc() call
  regmap: Add hook for printk logging for debugging during early init
  regmap: Fix work_buf switching for page update during virtual range access.
  regmap: Add support for register indirect addressing.
  regmap: Move lock out from internal function _regmap_update_bits().
  regmap: mmio: Staticize regmap_mmio_gen_context()
  regmap: Remove warning on stubbed dev_get_regmap()
  regmap: Implement support for wake IRQs
  regmap: Don't try to map non-existant IRQs
  regmap: Constify regmap_irq_chip
  regmap: mmio: request native endian formatting
  regmap: allow busses to request formatting with specific endianness

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

all we need it for is file->private_data, which is assign-once, already
assigned by that point and, incidentally, its value is already in use
by zoran ->mmap() anyway.  So just store that pointer instead...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and keep the sodding requests on stack - they are small enough.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>