- 01 8月, 2011 40 次提交
-
-
由 Mark Brown 提交于
The tps65910_irq_exit() cleanup function was generating a warning from sparse due to the lack of a prototype. This wasn't causing GCC warnings as the driver wasn't cleaning up its IRQs on exit at all so there was no use of an unprototyped function. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Alexander Stein 提交于
Tunnel Creek has an additional watchdog core. Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Walleij 提交于
This adds a previously undefined test register and removed a number of double-defined accessory detect registers (they are already defined higher up in the file. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Walleij 提交于
This synchronize the subdevice entries for the AB8500 MFD driver with the latest development of subdrivers for things like battery charging and temperature monitoring. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Robert Rosengren 提交于
Internal MFD device structs are marked as __devinitdata since the kernel will allocate memory for the same when calling mfd_add_devices. Signed-off-by: NRobert Rosengren <robert.rosengren@stericsson.com> Reviewed-by: NMattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: NJohan Palsson <johan.palsson@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Margarita Olaya 提交于
The tps65912 consist of 4 DCDCs and 10 LDOs. The output voltages can be configured by the SPI or I2C interface, they are meant to supply power to the main processor and other components. Signed-off-by: NMargarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Margarita Olaya 提交于
TPS65912 has five GPIOs that can be configured for different purposes. Signed-off-by: NMargarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Margarita Olaya 提交于
This module controls the interrupt handling for the tps65912. The interrupt sources can be the following: - GPIO - PWRON signal - PWRHOLD signal - Temperature detection Signed-off-by: NMargarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Margarita Olaya 提交于
The tps65912 chip is a power management IC. It contains the following components: - Regulators - GPIO controller The core driver is registered as a platform driver, it provides communication through I2C and SPI interfaces. Signed-off-by: NMargarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Peter Huewe 提交于
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Peter Huewe 提交于
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lars-Peter Clausen 提交于
Use the generic irq chip framework for implementing the irq chip for the jz4740-adc driver. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Even if we would've BUG()ed we should still tidy up after ourselves if that isn't enabled in the kernel config. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
When the byte swap was factored out into the per-register I/O functions the register restore for the IRQ mask cache (which we use and store in CPU native format for the interrupt handler) was not updated to do a byte swap when it uses the bulk I/O. Fix this by writing the cache out one register at a time. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
The WM831x AUXADC hardware can schedule multiple conversions at once, allowing higher performance when more than one source is in use as we can have the hardware start new conversions without having to wait for a register write. Take advantage of this in the interrupt driven case, maintaining a list of callers that are waiting for AUXADC conversions and completing them all simultaneously. The external interface of the AUXADC is not changed so there will be limited use of the feature immediately. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Switch on the device type before revision since anything we do here will be device as well as revision specific. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Sascha Hauer 提交于
This allows boards to leave the irq_base field unitialized and prevents them having to reserve irqs in the platform. pdata can be optional for irq support now. Without pdata the driver allocates some free irq range. With pdata and irq_base > 0 the driver allocates exactly the specified irq. Without pdata the irq defaults to IRQF_TRIGGER_LOW. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
In preparation for some additional work on the wm831x AUXADC code move the support into a separate file. This is a simple code motion patch, there should be no functional changes. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Ensure that there's no possibility of loosing an AUXADC interrupt by reading the conversion result in the IRQ handler when using interrupts. Otherwise it's possible that under very heavy load a new conversion could be initiated before the acknowledgement for a previous interrupt has happened. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Use irq_allocate_desc() to get the IRQ range, which turns into a noop on non-sparse systems. Since all existing users are non-sparse there should be no compatibility issues. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only be enabled via OTP or InstantConfig, not runtime software) the RTC can't function. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Allow platform data to flag the touchscreen as disabled so that if the touch driver is built in we don't end up causing lots of work by spuriously detecting touchscreen activity on systems where it isn't in use. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Systems using this functionality will be uncommon. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
The WM831x IRQ set_type() operation is doing a direct register write when called but since set_type() is called with the bus lock held this isn't legal and could cause deadlocks in the IRQ core. Fix this by posting the updates into an array and syncing in the bus_sync_unlock() callback. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
* 'nfs-for-3.1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits) pnfsblock: write_pagelist handle zero invalid extents pnfsblock: note written INVAL areas for layoutcommit pnfsblock: bl_write_pagelist pnfsblock: bl_read_pagelist pnfsblock: cleanup_layoutcommit pnfsblock: encode_layoutcommit pnfsblock: merge rw extents pnfsblock: add extent manipulation functions pnfsblock: bl_find_get_extent pnfsblock: xdr decode pnfs_block_layout4 pnfsblock: call and parse getdevicelist pnfsblock: merge extents pnfsblock: lseg alloc and free pnfsblock: remove device operations pnfsblock: add device operations pnfsblock: basic extent code pnfsblock: use pageio_ops api pnfsblock: add blocklayout Kconfig option, Makefile, and stubs pnfs: cleanup_layoutcommit pnfs: ask for layout_blksize and save it in nfs_server ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: use NUMA_NO_NODE slab: remove one NR_CPUS dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback由 Linus Torvalds 提交于
* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback: don't busy retry the inode on failed grab_super_passive()
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: gpio-charger: Fix checking return value of request_any_context_irq power_supply: MAX17042: Support additional properties max8903_charger: Allow platform data to be __initdata power_supply: Add charger driver for MAX8998/LP3974 power_supply: Add charger driver for MAX8997/8966 max17042_battery: Remove obsolete cleanup for clientdata twl4030_charger: Fix warnings wm831x_power: Support multiple instances wm831x_backup: Support multiple instances apm_power: Fix style error in macros s3c_adc_battery: Fix annotation for s3c_adc_battery_probe() bq20z75: Enable detection after registering bq20z75: Add support for external notification
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils: cpupower: Do detect IDA (opportunistic processor performance) via cpuid cpupower: Show Intel turbo ratio support via ./cpupower frequency-info cpupowerutils: increase MAX_LINE_LEN cpupower: Rename package from cpupowerutils to cpupower cpupowerutils: Rename: libcpufreq->libcpupower cpupowerutils: use kernel version-derived version string cpupowerutils: utils - ConfigStyle bugfixes cpupowerutils: helpers - ConfigStyle bugfixes cpupowerutils: idle_monitor - ConfigStyle bugfixes cpupowerutils: lib - ConfigStyle bugfixes cpupowerutils: bench - ConfigStyle bugfixes cpupowerutils: do not update po files on each and every compile cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism cpupowerutils: use COPYING, CREDITS from top-level directory cpupowerutils - cpufrequtils extended with quite some features
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: smc91c92_cs.c: fix bogus compiler warning orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002 hostap_cs: support cards with "Version 01.02" as third product ID pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3 pxa2xx pcmcia - stargate 2 use gpio array. pcmcia: pxa2xx: remove empty socket_init / socket_resume functions. drivers:pcmcia:soc_common: make socket_init and socket_suspend optional
-
由 Peng Tao 提交于
For invalid extents, find other pages in the same fsblock and write them out. [pnfsblock: write_begin] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: NZhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: NPeng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: NZhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: NPeng Tao <peng_tao@emc.com> [pnfsblock: read path error handling] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: NZhang Jingwang <yyalone@gmail.com> [pnfs-block: use new read_pagelist api] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In blocklayout driver. There are two things happening while layoutcommit/cleanup. 1. the modified extents are encoded. 2. On cleanup the extents are put back on the layout rw extents list, for reads. In the new system where actual xdr encoding is done in encode_layoutcommit() directly into xdr buffer, these are the new commit stages: 1. On setup_layoutcommit, the range is adjusted as before and a structure is allocated for communication with bl_encode_layoutcommit && bl_cleanup_layoutcommit (Generic layer provides a void-star to hang it on) 2. bl_encode_layoutcommit is called to do the actual encoding directly into xdr. The commit-extent-list is not freed and is stored on above structure. FIXME: The code is not yet converted to the new XDR cleanup 3. On cleanup the commit-extent-list is put back by a call to set_to_rw() as before, but with no need for XDR decoding of the list as before. And the commit-extent-list is freed. Finally allocated structure is freed. [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: NJim Rees <rees@umich.edu> [pnfsblock: introduce bl_committing list] Signed-off-by: NPeng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [blocklayout: encode_layoutcommit implementation] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> [pnfsblock: fix bug setting up layoutcommit.] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> [pnfsblock: cleanup_layoutcommit wants a status parameter] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In blocklayout driver. There are two things happening while layoutcommit/cleanup. 1. the modified extents are encoded. 2. On cleanup the extents are put back on the layout rw extents list, for reads. In the new system where actual xdr encoding is done in encode_layoutcommit() directly into xdr buffer, these are the new commit stages: 1. On setup_layoutcommit, the range is adjusted as before and a structure is allocated for communication with bl_encode_layoutcommit && bl_cleanup_layoutcommit (Generic layer provides a void-star to hang it on) 2. bl_encode_layoutcommit is called to do the actual encoding directly into xdr. The commit-extent-list is not freed and is stored on above structure. FIXME: The code is not yet converted to the new XDR cleanup 3. On cleanup the commit-extent-list is put back by a call to set_to_rw() as before, but with no need for XDR decoding of the list as before. And the commit-extent-list is freed. Finally allocated structure is freed. [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [blocklayout: encode_layoutcommit implementation] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> [pnfsblock: fix bug setting up layoutcommit.] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> [pnfsblock: prevent commit list corruption] [pnfsblock: fix layoutcommit with an empty opaque] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Adds working implementations of various support functions to handle INVAL extents, needed by writes, such as bl_mark_sectors_init and bl_is_sector_init. [pnfsblock: fix 64-bit compiler warnings for extent manipulation] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [Implement release_inval_marks] Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Implement bl_find_get_extent(), one of the core extent manipulation routines. [pnfsblock: Lookup list entry of layouts and tags in reverse order] Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> pnfsblock: fix print format warnings for sector_t and size_t gcc spews warnings about these on x86_64, e.g.: fs/nfs/blocklayout/blocklayout.c:74: warning: format ‘%Lu’ expects type ‘long long unsigned int’, but argument 2 has type ‘sector_t’ fs/nfs/blocklayout/blocklayout.c:388: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’ Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
XDR decodes the block layout payload sent in LAYOUTGET result, storing the result in an extent list. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fix bug getting pnfs_layout_type in translate_devid().] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-