- 07 10月, 2009 2 次提交
-
-
由 Stephen Hemminger 提交于
All usages of structure net_proto_ops should be declared const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Atis Elsts wrote: > Not sure if there is need to fill the mark from skb in tunnel xmit functions. In any case, it's not done for GRE or IPIP tunnels at the moment. Ok, I'll just drop that part, I'm not sure what should be done in this case. > Also, in this patch you are doing that for SIT (v6-in-v4) tunnels only, and not doing it for v4-in-v6 or v6-in-v6 tunnels. Any reason for that? I just sent that patch out too quickly, here's a better one with the updates. Add support for IPv6 route lookups using sk_mark. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2009 1 次提交
-
-
由 Bruno Prémont 提交于
ipv6: Fix commit 63d9950b (ipv6: Make v4-mapped bindings consistent with IPv4) Commit 63d9950b (ipv6: Make v4-mapped bindings consistent with IPv4) changes behavior of inet6_bind() for v4-mapped addresses so it should behave the same way as inet_bind(). During this change setting of err to -EADDRNOTAVAIL got lost: af_inet.c:469 inet_bind() err = -EADDRNOTAVAIL; if (!sysctl_ip_nonlocal_bind && !(inet->freebind || inet->transparent) && addr->sin_addr.s_addr != htonl(INADDR_ANY) && chk_addr_ret != RTN_LOCAL && chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) goto out; af_inet6.c:463 inet6_bind() if (addr_type == IPV6_ADDR_MAPPED) { int chk_addr_ret; /* Binding to v4-mapped address on a v6-only socket * makes no sense */ if (np->ipv6only) { err = -EINVAL; goto out; } /* Reproduce AF_INET checks to make the bindings consitant */ v4addr = addr->sin6_addr.s6_addr32[3]; chk_addr_ret = inet_addr_type(net, v4addr); if (!sysctl_ip_nonlocal_bind && !(inet->freebind || inet->transparent) && v4addr != htonl(INADDR_ANY) && chk_addr_ret != RTN_LOCAL && chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) goto out; } else { Signed-off-by Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2009 1 次提交
-
-
由 Sridhar Samudrala 提交于
- validate and forward GSO UDP/IPv6 packets from untrusted sources. - do software UFO if the outgoing device doesn't support UFO. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2009 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
The ipv6 module uses rcu_call() thus it should use rcu_barrier() on module unload. Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2009 1 次提交
-
-
由 Brian Haley 提交于
Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
For the overwhelming majority of cases, skb_gro_header's return value cannot be NULL. Yet we must check it because of its current form. This patch splits it up into multiple functions in order to avoid this. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2009 3 次提交
-
-
由 Vlad Yasevich 提交于
Binding to a v4-mapped address on an AF_INET6 socket should produce the same result as binding to an IPv4 address on AF_INET socket. The two are interchangable as v4-mapped address is really a portability aid. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The IPv4 wildcard (0.0.0.0) address does not intersect in any way with explicit IPv6 addresses. These two should be permitted, but the IPv4 conflict code checks the ipv6only bit as part of the test. Since binding to an explicit IPv6 address restricts the socket to only that IPv6 address, the side-effect is that the socket behaves as v6-only. By explicitely setting ipv6only in this case, allows the 2 binds to succeed. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
A socket marked v6-only, can not receive or send traffic to v4-mapped addresses. Thus allowing binding to v4-mapped address on such a socket makes no sense. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2009 1 次提交
-
-
由 John Dykstra 提交于
Do not try to "uninitialize" ipv6 if its initialization had been skipped because module parameter disable=1 had been specified. Reported-by: NThomas Backlund <tmb@mandriva.org> Signed-off-by: NJohn Dykstra <john.dykstra1@gmail.com> Acked-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2009 1 次提交
-
-
由 Brian Haley 提交于
Add "disable" module parameter support to ipv6.ko by specifying "disable=1" on module load. We just do the minimum of initializing inetsw6[] so calls from other modules to inet6_register_protosw() won't OOPs, then bail out. No IPv6 addresses or sockets can be created as a result, and a reboot is required to enable IPv6. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2009 1 次提交
-
-
由 Harvey Harrison 提交于
Base versions handle constant folding now. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
Unfortunately simplicity isn't always the best. The fraginfo interface turned out to be suboptimal. The problem was quite obvious. For every packet, we have to copy the headers from the frags structure into skb->head, even though for 99% of the packets this part is immediately thrown away after the merge. LRO didn't have this problem because it directly read the headers from the frags structure. This patch attempts to address this by creating an interface that allows GRO to access the headers in the first frag without having to copy it. Because all drivers that use frags place the headers in the first frag this optimisation should be enough. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
We need to perform skb_postpull_rcsum after pulling the IPv6 header in order to maintain the correctness of the complete checksum. This patch also adds a missing iph reload after pulling. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
This patch adds GRO support for IPv6. IPv6 GRO supports extension headers in the same way as GSO (by using the same infrastructure). It's also simpler compared to IPv4 since we no longer have to worry about fragmentation attributes or header checksums. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns to flow_cache_lookup() and resolver callback. Take it from socket or netdevice. Stub DECnet to init_net. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
LD net/ipv6/ipv6.o WARNING: net/ipv6/ipv6.o(.text+0xd8): Section mismatch in reference from the function inet6_net_init() to the function .init.text:ipv6_init_mibs() Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2008 2 次提交
-
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2008 4 次提交
-
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The content of init_ipv6_mibs/cleanup_ipv6_mibs will be moved to new calls one by one next. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Zijlstra 提交于
This makes that ip6_route_net_init() does all of the route init code. There used to be a race between ip6_route_net_init() and ip6_net_init() and someone relying on the combined result was left out cold. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2008 1 次提交
-
-
由 KOVACS Krisztian 提交于
inet_iif() in inet_sock.h requires route.h. Since users of inet_iif() usually require other route.h functionality anyway this patch moves inet_iif() to route.h. Signed-off-by: NKOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2008 1 次提交
-
-
由 Al Viro 提交于
Piss-poor sysctl registration API strikes again, film at 11... What we really need is _pathname_ required to be present in already registered table, so that kernel could warn about bad order. That's the next target for sysctl stuff (and generally saner and more explicit order of initialization of ipv[46] internals wouldn't hurt either). For the time being, here are full fixups required by ..._rotable() stuff; we make per-net sysctl sets descendents of "ro" one and make sure that sufficient skeleton is there before we start registering per-net sysctls. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2008 1 次提交
-
-
由 Al Viro 提交于
Piss-poor sysctl registration API strikes again, film at 11... What we really need is _pathname_ required to be present in already registered table, so that kernel could warn about bad order. That's the next target for sysctl stuff (and generally saner and more explicit order of initialization of ipv[46] internals wouldn't hurt either). For the time being, here are full fixups required by ..._rotable() stuff; we make per-net sysctl sets descendents of "ro" one and make sure that sufficient skeleton is there before we start registering per-net sysctls. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 7月, 2008 2 次提交
-
-
由 Ilpo Järvinen 提交于
Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul E. McKenney 提交于
All uses of list_for_each_rcu() can be profitably replaced by the easier-to-use list_for_each_entry_rcu(). This patch makes this change for networking, in preparation for removing the list_for_each_rcu() API entirely. Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 7月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
ip{,v6}_mroute_{set,get}sockopt() should not matter by optimization but it would be better not to depend on optimization semantically. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
If do not do it, we will get following issues: 1. Leaving junks after inet6_init failing halfway. 2. Leaving proc and notifier junks after ipv6 modules unloading. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 15 6月, 2008 1 次提交
-
-
由 Brian Haley 提交于
Change struct proto destroy function pointer to return void. Noticed by Al Viro. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
The bindv6only is tuned via sysctl. It is already on a struct net and per-net sysctls allow for its modification (ipv6_sysctl_net_init). Despite this the value configured in the init net is used for the rest of them. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Based on ancient patch by Mickael Hoerdt <hoerdt@clarinet.u-strasbg.fr>, which is available at <http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 27 3月, 2008 1 次提交
-
-
由 Daniel Lezcano 提交于
Make use of the network namespace information to have this protocol to handle several network namespace. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 21 3月, 2008 1 次提交
-
-
由 Daniel Lezcano 提交于
Make the proc for tcp6 to be per namespace. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-