It builds a test program and use it to verify pipe behavior with perf
record, inject and report.

  $ perf test pipe -v
  80: perf pipe recording and injection test                          :
  --- start ---
  test child forked, pid 1109301
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
     1109315  1109315       -1 |test.file.MGNff
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
      99.99%  test.file.MGNff  test.file.MGNffM  [.] noploop
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
      99.99%  test.file.MGNff  test.file.MGNffM  [.] noploop
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.153 MB /tmp/perf.data.dmsnlx (3995 samples) ]
      99.99%  test.file.MGNff  test.file.MGNffM  [.] noploop
  test child finished with 0
  ---- end ----
  perf pipe recording and injection test: Ok
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-6-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When the input is a regular file but the output is a pipe, it should
write a pipe header.  But just repiping would write a portion of the
existing header which is different in 'size' value.  So we need to
prevent it and write a new pipe header along with other information
like event attributes and features.

This can handle something like this:

  # perf record -a -B sleep 1

  # perf inject -b -i perf.data | perf report -i -

Factor out perf_event__synthesize_for_pipe() to be shared between perf
record and inject.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-5-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Sometimes it needs to save the perf inject data to a file for debugging.
But normally it assumes the same format for input and output, so the end
result cannot be used due to a broken format.

  # perf record -a -o - sleep 1 | perf inject -b -o my.data

  # perf report -i my.data --stdio
  0x208 [0]: failed to process type: 0 [Invalid argument]
  Error:
  failed to process sample
  # To display the perf.data header info, please use --header/--header-only options.
  #

In this case, it thought the data has a regular file header since the
output is not a pipe.  But actually it doesn't have one and has a pipe
file header.  At the end of the session, it tries to rewrite the regular
file header with updated features and it overwrites the data just
follows the pipe header.

Fix it by checking either the input and the output is a pipe.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-4-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently it unconditionally writes to stdout for repipe.  But perf
inject can direct its output to a regular file.  Then it needs to
write the header to the file as well.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-3-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The repipe argument is only used by perf inject and the all others
passes 'false'.  Let's remove it from the function signature and add
__perf_session__new() to be called from perf inject directly.

This is a preparation of the change the pipe input/output.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org
[ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

https://github.com/beaker-project/restraint/issues/215 describes a file
descriptor leak which revealed the test failure described here.

The 'DSO data reopen' perf test assumes that RLIMIT_NOFILE limits the
number of open file descriptors, but it actually limits newly opened
file descriptors. When the file descriptor limit is reduced, file
descriptors already open remain open regardless of the new limit. This
test failure does not occur if open file descriptors are contiguous,
beginning at zero.

The following command triggers this perf test failure.

perf test 'DSO data reopen' 3>/dev/null 8>/dev/null

This patch determines the file descriptor limit by opening four files
and then closing them. The limit is set to the fourth file descriptor,
leaving only the first three available because any newly opened file
descriptor must be less than the limit.
Signed-off-by: NEirik Fuller <efuller@redhat.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NMichael Petlan <mpetlan@redhat.com>
LPU-Reference: 20210626023825.1398547-1-efuller@redhat.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add JSON metrics for Elkhartlake to perf.
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210802053440.21035-3-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add JSON core events for Elkhartlake to perf.

Based on JSON list v1.02:

https://download.01.org/perfmon/EHL/Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210802053440.21035-2-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add JSON metrics for Tigerlake to perf.

Based on TMA metrics 4.21 at 01.org.
https://download.01.org/perfmon/Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719070058.4159-2-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add JSON core events for Tigerlake to perf.

Based on JSON list v1.03:

https://download.01.org/perfmon/TGL/Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719070058.4159-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When users use 'perf annotate' on unsupported machines, error logs
should be printed for user feedback.
Signed-off-by: NLi Huafei <lihuafei1@huawei.com>
Reviewed-by: NJames Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
Link: http://lore.kernel.org/lkml/20210726123854.13463-2-lihuafei1@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On my aarch64 big endian machine, the perf annotate does not work.

 # perf annotate
  Percent |      Source code & Disassembly of [kernel.kallsyms] for cycles (253 samples, percent: local period)
 --------------------------------------------------------------------------------------------------------------
  Percent |      Source code & Disassembly of [kernel.kallsyms] for cycles (1 samples, percent: local period)
 ------------------------------------------------------------------------------------------------------------
  Percent |      Source code & Disassembly of [kernel.kallsyms] for cycles (47 samples, percent: local period)
 -------------------------------------------------------------------------------------------------------------
 ...

This is because the arch_find() function uses the normalized architecture
name provided by normalize_arch(), and my machine's architecture name
aarch64_be is not normalized to arm64.  Like other architectures such as
arm and powerpc, we can fuzzy match the architecture names associated with
aarch64.* and normalize them.

It seems that there is also arm64_be architecture name, which we also
normalize to arm64.
Signed-off-by: NLi Huafei <lihuafei1@huawei.com>
Reviewed-by: NJames Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
Link: http //lore.kernel.org/lkml/20210726123854.13463-1-lihuafei1@huawei.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Previously the code would see if, for example,
tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate
a "generic" switch statement using the asm-generic/errno.h.

This creates multiple identical "generic" switch statements before the
default generic switch statement for an unknown architecture.

By simplifying the archlist to be only for architectures that are not
"generic" the amount of generated code can be reduced from 14 down to 6
functions.

Remove the special case of x86, instead reverse the architecture names
so that it comes first.

Committer testing:

  $ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > before

Apply this patch and:

  $ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > after

14 arches down to 6, that are the ones with an explicit errno.h file:

  $ ls -1 tools/arch/*/include/uapi/asm/errno.h
  tools/arch/alpha/include/uapi/asm/errno.h
  tools/arch/mips/include/uapi/asm/errno.h
  tools/arch/parisc/include/uapi/asm/errno.h
  tools/arch/powerpc/include/uapi/asm/errno.h
  tools/arch/sparc/include/uapi/asm/errno.h
  tools/arch/x86/include/uapi/asm/errno.h
  $

  $ diff -u4 before after
  @@ -2099,32 +987,16 @@
   const char *arch_syscalls__strerrno(const char *arch, int err)
   {
   	if (!strcmp(arch, "x86"))
   		return errno_to_name__x86(err);
  -	if (!strcmp(arch, "alpha"))
  -		return errno_to_name__alpha(err);
  -	if (!strcmp(arch, "arc"))
  -		return errno_to_name__arc(err);
  -	if (!strcmp(arch, "arm"))
  -		return errno_to_name__arm(err);
  -	if (!strcmp(arch, "arm64"))
  -		return errno_to_name__arm64(err);
  -	if (!strcmp(arch, "csky"))
  -		return errno_to_name__csky(err);
  -	if (!strcmp(arch, "mips"))
  -		return errno_to_name__mips(err);
  -	if (!strcmp(arch, "parisc"))
  -		return errno_to_name__parisc(err);
  -	if (!strcmp(arch, "powerpc"))
  -		return errno_to_name__powerpc(err);
  -	if (!strcmp(arch, "riscv"))
  -		return errno_to_name__riscv(err);
  -	if (!strcmp(arch, "s390"))
  -		return errno_to_name__s390(err);
  -	if (!strcmp(arch, "sh"))
  -		return errno_to_name__sh(err);
   	if (!strcmp(arch, "sparc"))
   		return errno_to_name__sparc(err);
  -	if (!strcmp(arch, "xtensa"))
  -		return errno_to_name__xtensa(err);
  +	if (!strcmp(arch, "powerpc"))
  +		return errno_to_name__powerpc(err);
  +	if (!strcmp(arch, "parisc"))
  +		return errno_to_name__parisc(err);
  +	if (!strcmp(arch, "mips"))
  +		return errno_to_name__mips(err);
  +	if (!strcmp(arch, "alpha"))
  +		return errno_to_name__alpha(err);
   	return errno_to_name__generic(err);
   }

The rest of the patch is the removal of the errno_to_name__generic()
unneeded clones.
Signed-off-by: NIan Rogers <irogers@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210513060441.408507-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Place early, as they are in the git Makefile. Remove references to a
'technical` directory that doesn't exist in perf.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-8-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

howto-index.sh exists in git but not in perf, as such targets that
depend upon it fail. Remove such failing targets.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-7-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

cmd-list.perl exists in git but not in perf. As such these targets fail
with missing dependencies. Remove them.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-6-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enabled to ensure that info pages build.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-5-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Perf doesn't have a user-manual.txt, but git does and this explains why
there are references here. Having these references breaks 'make info' as
user-manual.info can't be created given the missing dependency. Remove
all references to user-manual so that 'make info' can succeed.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-4-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The doc.dep dependencies for the Makefile fail to build as
build-docdep.perl is missing. Add this file from git.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-3-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before this change 'make perfman.info' fails as cat-texi.perl is
missing. It also fails as the makeinfo output isn't written into the
appropriate file. Add cat-texi.perl from git. Add missing output file
flag for makeinfo.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210715013343.2286699-2-irogers@google.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The TRBE (Trace Buffer Extension) feature allows a separate trace buffer
for each trace source, therefore the trace wouldn't need to be
formatted. The driver was introduced in commit 3fbf7f01
("coresight: sink: Add TRBE driver").

The formatted/unformatted mode is encoded in one of the flags of the
AUX record. The first AUX record encountered for each event is used to
determine the mode, and this will persist for the remaining trace that
is either decoded or dumped.
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJames Clark <james.clark@arm.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210721150202.32065-7-james.clark@arm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When dumping trace, the decoder is continually deleted and recreated to
decode each buffer. To support both formatted and unformatted trace in
a later commit, the decoder will be configured in advance.

This commit removes the deletion of the decoder and allows the
formatted/unformatted setting to persist.
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJames Clark <james.clark@arm.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210721150202.32065-6-james.clark@arm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The decoder is quite noisy when being reset. In a future commit,
dump-raw-trace will use a code path that resets the decoder rather than
creating a new one, so printing has to be suppressed to not flood the
output.
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJames Clark <james.clark@arm.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210721150202.32065-5-james.clark@arm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Continually creating queues in cs_etm__process_event() is unnecessary.
They only need to be created when a buffer for a new CPU or thread is
encountered. This can be in two places, when building the queues in
advance in cs_etm__process_auxtrace_info(), or in
cs_etm__process_auxtrace_event() when data_queued is false and the
index wasn't available (pipe mode).

This change will allow the 'formatted' decoder setting to applied when
iterating over aux records in a later commit.
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJames Clark <james.clark@arm.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210721150202.32065-4-james.clark@arm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This refactoring has some benefits:

 * Decoding is done to find the timestamp. If we want to print errors
   when maps aren't available, then doing it from cs_etm__setup_queue()
   may cause warnings to be printed.

 * The cs_etm__setup_queue() flow is shared between timed and timeless
   modes, so it needs to be guarded by an if statement which can now
   be removed.

 * Allows moving the setup queues function earlier.

 * If data was piped in, then not all queues would be filled so it
   wouldn't have worked properly anyway. Now it waits for flush so
   data in all queues will be available.

The motivation for this is to decouple setup functions with ones that
involve decoding. That way we can move the setup function earlier when
the formatted/unformatted trace information is available.
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJames Clark <james.clark@arm.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210721150202.32065-3-james.clark@arm.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The kernel start address is already cached in the machine struct once it
is initialised, so storing it in the cs_etm struct is unnecessary.

It also depends on kernel maps being available to be initialised.
Therefore cs_etm__setup_queues() isn't an appropriate place to call it
because it could be called before processing starts. It would be better
to initialise it at the point when it is needed, then we can be sure
that all the necessary maps are available. Also by calling
machine__kernel_start() multiple times it can be initialised at some
point, even if it failed to initialise previously due to missing maps.

In a later commit cs_etm__setup_queues() will be moved which is the
motivation for this change.
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJames Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20210721150202.32065-2-james.clark@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As 'enum bpf_cmd' has been extended a lot, update the cmd string table to
decode sys_bpf first arg clearly in perf-trace.
Signed-off-by: NWei Li <liwei391@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210714015000.2844867-1-liwei391@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top'
   abort, uncovering a design flaw on how namespace information is kept.
   The fix for that is more than we can do right now, leave it for the
   next merge window.

 - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up
   the decoding of some records.

 - Fix PMU alias matching.

Thanks to James Clark and John Garry for these fixes.

* tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  Revert "perf map: Fix dso->nsinfo refcounting"
  perf pmu: Fix alias matching
  perf cs-etm: Split --dump-raw-trace by AUX records

Pull powerpc fixes from Michael Ellerman:

 - Don't use r30 in VDSO code, to avoid breaking existing Go lang
   programs.

 - Change an export symbol to allow non-GPL modules to use spinlocks
   again.

Thanks to Paul Menzel, and Srikar Dronamraju.

* tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vdso: Don't use r30 to avoid breaking Go lang
  powerpc/pseries: Fix regression while building external modules

Pull xfs fixes from Darrick Wong:
 "This contains a bunch of bug fixes in XFS.

  Dave and I have been busy the last couple of weeks to find and fix as
  many log recovery bugs as we can find; here are the results so far. Go
  fstests -g recoveryloop! ;)

   - Fix a number of coordination bugs relating to cache flushes for
     metadata writeback, cache flushes for multi-buffer log writes, and
     FUA writes for single-buffer log writes

   - Fix a bug with incorrect replay of attr3 blocks

   - Fix unnecessary stalls when flushing logs to disk

   - Fix spoofing problems when recovering realtime bitmap blocks"

* tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: prevent spoofing of rtbitmap blocks when recovering buffers
  xfs: limit iclog tail updates
  xfs: need to see iclog flags in tracing
  xfs: Enforce attr3 buffer recovery order
  xfs: logging the on disk inode LSN can make it go backwards
  xfs: avoid unnecessary waits in xfs_log_force_lsn()
  xfs: log forces imply data device cache flushes
  xfs: factor out forced iclog flushes
  xfs: fix ordering violation between cache flushes and tail updates
  xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog
  xfs: external logs need to flush data device
  xfs: flush data dev on external log write

Pull cifs fixes from Steve French:
 "Three cifs/smb3 fixes, including two for stable, and a fix for an
  fallocate problem noticed by Clang"

* tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add missing parsing of backupuid
  smb3: rc uninitialized in one fallocate path
  SMB3: fix readpage for large swap cache

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...

Pull ACPI fixes from Rafael Wysocki:
 "These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007

Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.

In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already.  Doing
extraneous wakeups will only cause potential thundering herd problems.

However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it".  Even if there was no edge in sight.

Quoting Sandeep Patil:
 "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup
  logic') changed pipe write logic to wakeup readers only if the pipe
  was empty at the time of write. However, there are libraries that
  relied upon the older behavior for notification scheme similar to
  what's described in [1]

  One such library 'realm-core'[2] is used by numerous Android
  applications. The library uses a similar notification mechanism as GNU
  Make but it never drains the pipe until it is full. When Android moved
  to v5.10 kernel, all applications using this library stopped working.

  The library has since been fixed[3] but it will be a while before all
  applications incorporate the updated library"

Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong.  Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.

So add the extraneous wakeup, to approximate the old behavior.

[ I say "approximate", because the exact old behavior was to do a wakeup
  not for each write(), but for each pipe buffer chunk that was filled
  in. The behavior introduced by this change is not that - this is just
  "every write will cause a wakeup, whether necessary or not", which
  seems to be sufficient for the broken library use. ]

It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.

See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".

Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by: NSandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.

This reverts commit 2d6b74ba.

Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

* acpi-resources:
  Revert "ACPI: resources: Add checks for ACPI IRQ override"

* acpi-dptf:
  ACPI: DPTF: Fix reading of attributes

Pull block fixes from Jens Axboe:

 - gendisk freeing fix (Christoph)

 - blk-iocost wake ordering fix (Tejun)

 - tag allocation error handling fix (John)

 - loop locking fix. While this isn't the prettiest fix in the world,
   nobody has any good alternatives for 5.14. Something to likely
   revisit for 5.15. (Tetsuo)

* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  block: delay freeing the gendisk
  blk-iocost: fix operation ordering in iocg_wake_fn()
  blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
  loop: reintroduce global lock for safe loop_validate_file() traversal

Pull io_uring fixes from Jens Axboe:

 - A fix for block backed reissue (me)

 - Reissue context hardening (me)

 - Async link locking fix (Pavel)

* tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  io_uring: fix poll requests leaking second poll entries
  io_uring: don't block level reissue off completion path
  io_uring: always reissue from task_work context
  io_uring: fix race in unified task_work running
  io_uring: fix io_prep_async_link locking

Pull libata fixlets from Jens Axboe:

 - A fix for PIO highmem (Christoph)

 - Kill HAVE_IDE as it's now unused (Lukas)

* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  arch: Kconfig: clean up obsolete use of HAVE_IDE
  libata: fix ata_pio_sector for CONFIG_HIGHMEM