The controller state is set to resetting prior to disabling the
controller, so this patch accounts for that state when deciding if it
needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0'
blocks forever because the queues were never frozen.

Fixes: 82b057ca ("nvme-pci: fix multiple ctrl removal scheduling")
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The F54 driver is currently only using the first 6 bytes of F54 so there is
no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and
similar) have an issue with the touchpad or I2C bus when reading reports
larger then 16 bytes. Reads larger then 16 bytes are reported in two HID
reports. Something about the back to back reports seems to cause the next
read to report incorrect data. This results in F30 failing to load and the
click button failing to work.

Previous issues with the I2C controller or touchpad were addressed in:
commit 5b65c2a0 ("HID: rmi: check sanity of the incoming report")

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949Signed-off-by: NAndrew Duggan <aduggan@synaptics.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NNick Dyer <nick@shmanahar.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The i2c-imx driver incorrectly uses readb()/writeb() to read and
write to the appropriate registers when performing a repeated start.
The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions
should be used instead. Performing a repeated start results in
a kernel panic. The platform is imx.
Signed-off-by: NMichail G Etairidis <m.etairidis@beck-ipc.com>
Fixes: ce1a7884 ("i2c: imx: add DMA support for freescale i2c driver")
Fixes: 054b62d9 ("i2c: imx: fix the i2c bus hang issue when do repeat restart")
Acked-by: NFugang Duan <fugang.duan@nxp.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Commit f406270b ("ACPI / scan: Set the visited flag for all
enumerated devices") caused that two group of special SPI or I2C
devices do not enumerate. SPI and I2C devices are expected to be
enumerated by the SPI and I2C subsystems but change caused that
acpi_bus_attach() marks those devices with acpi_device_set_enumerated().

First group of devices are matched using Device Tree compatible property
with special _HID "PRP0001". Those devices have matched scan handler,
acpi_scan_attach_handler() retuns 1 and acpi_bus_attach() marks them
with acpi_device_set_enumerated().

Second group of devices without valid _HID such as "LNXVIDEO" have
device->pnp.type.platform_id set to zero and change again marks them
with acpi_device_set_enumerated().

Fix this by flagging the SPI and I2C devices during struct acpi_device
object initialization time and let the code in acpi_bus_attach() to go
through the device_attach() and acpi_default_enumeration() path for all
SPI and I2C devices.

Fixes: f406270b (ACPI / scan: Set the visited flag for all enumerated devices)
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If only a subset of the devices associated with multiple regions support
a given special operation (eg. DISCARD) then the dec_count() that is
used to set error for the region must increment the io->count.

Otherwise, when the dec_count() is called it can cause the dm-io
caller's bio to be completed multiple times.  As was reported against
the dm-mirror target that had mirror legs with a mix of discard
capabilities.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077Reported-by: NZhang Yi <yizhan@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Use spin_lock_irqsave and spin_unlock_irqrestore rather than
spin_{lock,unlock}_irq in submit_flush_bio().

Otherwise lockdep issues the following warning:
  DEBUG_LOCKS_WARN_ON(current->hardirq_context)
  WARNING: CPU: 1 PID: 0 at kernel/locking/lockdep.c:2748 trace_hardirqs_on_caller+0x107/0x180
Reported-by: NOndrej Kozina <okozina@redhat.com>
Tested-by: NOndrej Kozina <okozina@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NMikulas Patocka <mpatocka@redhat.com>

In

commit 91eefc05
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Dec 14 00:08:10 2016 +0100

    drm: Tighten locking in drm_mode_getconnector

I reordered the logic a bit in that IOCTL, but that broke userspace
since it'll get the new mode list, but not the new property values.
Fix that again.

v2: Fix up the error path handling when copy_to_user for the modes
failes (Dhinakaran).

Fixes: 91eefc05 ("drm: Tighten locking in drm_mode_getconnector")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: N"H.J. Lu" <hjl.tools@gmail.com>
Tested-by: N"H.J. Lu" <hjl.tools@gmail.com>
Cc: <stable@vger.kernel.org> # v4.11+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100576
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620202837.1701-1-daniel.vetter@ffwll.ch

gic_read_count(), gic_write_compare() and gic_write_cpu_compare() are
often used in a sequence to update the compare register with a count
value increased by a small offset.
With small delta values used to update the compare register, the time to
update function trace for these operations may be longer than the update
timeout leading to update failure.
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1496991845-27031-1-git-send-email-marcin.nowakowski@imgtec.com

When having the skb pointer in the first descriptor, stmmac_tx_clean
can get called at a moment where the IP has only cleared the own bit
of the first descriptor, thus freeing the skb, even though there can
be several descriptors whose buffers point into the same skb.

By simply moving the skb pointer from the first descriptor to the last
descriptor, a skb will get freed only when the IP has cleared the
own bit of all the descriptors that are using that skb.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into
 efx_ef10_sriov_set_vf_vlan().  This would put the mutex in a bad state and
 cause all subsequent down attempts to hang.

Fixes: 671b53ee ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the use of arch_setup_dma_ops() that was not exported
and was breaking loadable module compilation.
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure dma_ops are set, to be later used by the Ethernet driver.
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes resume from suspend.

bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121Reported-by: NPrzemek <soprwa@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Disable PX on these systems.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Increase the default display clock on newer asics to
accomodate some high res modes with really high refresh
rates.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=93826Acked-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We were using the wrong structure which lead to an overflow
on some boards.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=101387Acked-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

As it turns out more than just Armada 370 and XP support using GPIO
lines as PWM lines. For example the Armada 38x family has the same
hardware support. As such "marvell,armada-370-xp-gpio" for the
compatible string is a misnomer.

Change the compatible string to "marvell,armada-370-gpio" before the
driver makes it out of the -rc stage. This also follows the practice of
using only the first device family supported as part of the name.

Also update the documentation and comments in the code accordingly.

Fixes: 757642f9 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: NRalph Sennhauser <ralph.sennhauser@gmail.com>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Setting these bits causes libinput to fail to initialize the device;
setting BTN_TOUCH and BTN_TOOL_FINGER causes it to treat the mouse as a
touchpad, and it then refuses to continue when it discovers ABS_X is not
set.

This breaks all known Wayland compositors, as well as Xorg when the
libinput driver is being used.

This reverts commit f4b65b95.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Cc: Che-Liang Chiou <clchiou@chromium.org>
Cc: Thierry Escande <thierry.escande@collabora.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Without this quirk, the touchpad is not responsive on this product, with
the following message repeated in the logs:

 psmouse serio1: bad data from KBC - timeout

Add it to the notimeout list alongside other similar Fujitsu laptops.
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Odd versions of gcc for the sh4 architecture will actually warn about
flags being used while uninitialized, so we set them to zero. Non crazy
gccs will optimize that out again, so it doesn't make a difference.

Next, over aggressive gccs could inline the expression that defines
use_lock, which could then introduce a race resulting in a lock
imbalance. By using READ_ONCE, we prevent that fate. Finally, we make
that assignment const, so that gcc can still optimize a nice amount.

Finally, we fix a potential deadlock between primary_crng.lock and
batched_entropy_reset_lock, where they could be called in opposite
order. Moving the call to invalidate_batched_entropy to outside the lock
rectifies this issue.

Fixes: b169c13dSigned-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

Signed-off-by: NJunshan Fang <Junshan.Fang@amd.com>
Reviewed-by: NRoger.He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Maarten and Ville noticed that we are enabling backlight via DP aux very
early in the modeset_init path via the intel_dp_aux_setup_backlight()
function, since commit e7156c83 ("drm/i915: Add Backlight Control using
DPCD for eDP connectors (v9)"). Looks like all we need to do during
_setup_backlight() is read the current brightness state instead of
modifying it.

v2: Rewrote commit message.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: NPuthikorn Voravootivat <puthik@chromium.org>
Fixes: e7156c83 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)")
Link: http://patchwork.freedesktop.org/patch/msgid/1497384239-2965-1-git-send-email-dhinakaran.pandiyan@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit f6262bda)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497895708-19422-1-git-send-email-dhinakaran.pandiyan@intel.com

Do not sleep in ntb_async_tx_submit, which could deadlock.
This reverts commit "8c874cc1"

Fixes: 8c874cc1 ("NTB: Address out of DMA descriptor issue with NTB")
Reported-by: NJia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Fixing doorbell register length to 32bits per spec. On Skylake NTB, the
doorbell registers are 32bit write only registers. The source for the
doorbell is a 64bit register that shows the interrupt bits.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

A divide by zero error occurs if qp_count is less than mw_count because
num_qps_mw is calculated to be zero. The calculation appears to be
incorrect.

The requirement is for num_qps_mw to be set to qp_count / mw_count
with any remainder divided among the earlier mws.

For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1
will have 3 qps per window and mws 2 through 4 will have 2 qps per window.
Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher
than when mw_num >= qp_count.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

In cases where there are more mw's than spads/2-2, the mw count gets
reduced to match the limitation. ntb_transport also tries to ensure that
there are fewer qps than mws but uses the full mw count instead of
the reduced one. When this happens, the math in
'ntb_transport_setup_qp_mw' will get confused and result in a kernel
paging request bug.

This patch fixes the bug by reducing qp_count to the reduced mw count
instead of the full mw count.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

The order parameters are powers of 2; adjust the usage information
to use correct mathematical representations.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.
Signed-off-by: NLin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the module initialisation there is a possible race
(basically race between uld and lld) where neither the uld
nor lld notifies the uP about where to route the ctrl queue
completions. LLD skips notifying uP as the rdma queues were
not created by then (will leave it to ULD to notify the uP).
As the ULD comes up, it also skips notifying the uP as the
flag FULL_INIT_DONE is not set yet (ULD assumes that the
interface is not up yet).

Consequently, this race between uld and lld leaves uP
unnotified about where to send the ctrl queue completions
to, leading to iwarp RI_RES WR failure.

Here is the race:

CPU 0                                   CPU1

- allocates nic rx queus
- t4_sge_alloc_ctrl_txq()
(if rdma rsp queues exists,
tell uP to route ctrl queue
compl to rdma rspq)
                                - acquires the mutex_lock
                                - allocates rdma response queues
                                - if FULL_INIT_DONE set,
                                  tell uP to route ctrl queue compl
                                  to rdma rspq
                                - relinquishes mutex_lock
- acquires the mutex_lock
- enable_rx()
- set FULL_INIT_DONE
- relinquishes mutex_lock

This patch fixes the above issue.

Fixes: e7519f99('cxgb4: avoid enabling napi twice to the same queue')
Signed-off-by: NRaju Rangoju <rajur@chelsio.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
CC: Stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If intel_crtc_disable_noatomic() were to ever get called during resume
we'd end up deadlocking since resume has its own acqcuire_ctx but
intel_crtc_disable_noatomic() still tries to use the
mode_config.acquire_ctx. Pass down the correct acquire ctx from the top.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-3-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit da1d0e26)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Pass down the correct acquire context to the pipe A quirk load detect
hack during display resume. Avoids deadlocking the entire thing.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-2-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit aecd36b8)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

I tried __GFP_NORETRY in the belief that __GFP_RECLAIM was effective. It
struggles with handling reclaim of our dirty buffers and relies on
reclaim via kswapd. As a result, a single pass of direct reclaim is
unreliable when i915 occupies the majority of available memory, and the
only means of effectively waiting on kswapd to amke progress is by not
setting the __GFP_NORETRY flag and lopping. That leaves us with the
dilemma of invoking the oomkiller instead of propagating the allocation
failure back to userspace where it can be handled more gracefully (one
hopes).  In the future we may have __GFP_MAYFAIL to allow repeats up until
we genuinely run out of memory and the oomkiller would have been invoked.
Until then, let the oomkiller wreck havoc.

v2: Stop playing with side-effects of gfp flags and await __GFP_MAYFAIL
v3: Update comments that direct reclaim only appears to be ignoring our
dirty buffers!

Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Testcase: igt/gem_tiled_swapping
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit eaf41801)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Commit 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than
incur the oom for gfx allocations") made the bold decision to try and
avoid the oomkiller by reporting -ENOMEM to userspace if our allocation
failed after attempting to free enough buffer objects. In short, it
appears we were giving up too easily (even before we start wondering if
one pass of reclaim is as strong as we would like). Part of the problem
is that if we only shrink just enough pages for our expected allocation,
the likelihood of those pages becoming available to us is less than 100%
To counter-act that we ask for twice the number of pages to be made
available. Furthermore, we allow the shrinker to pull pages from the
active list in later passes.

v2: Be a little more cautious in paging out gfx buffers, and leave that
to a more balanced approach from shrink_slab(). Important when combined
with "drm/i915: Start writeback from the shrinker" as anything shrunk is
immediately swapped out and so should be more conservative.

Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-1-chris@chris-wilson.co.uk
(cherry picked from commit 4846bf0c)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We need to keep track of the last location we ask the hw to read up to
(RING_TAIL) separately from our last write location into the ring, so
that in the event of a GPU reset we do not tell the HW to proceed into
a partially written request (which can happen if that request is waiting
for an external signal before being executed).

v2: Refactor intel_ring_reset() (Mika)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_fence/await-hang
Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Fixes: d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425130049.26147-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit e6ba9992)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615131129.3061-1-chris@chris-wilson.co.uk

We are passing a buffer with ACPI_ALLOCATE_BUFFER set to
acpi_evaluate_object, so we must free it when we are done with it.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

virtio balloon bypasses the DMA API entirely so does not support the
VIOMMU right now.  It's not clear we need that support, for now let's
just make sure we don't pretend to support it.

Cc: stable@vger.kernel.org
Cc: Wei Wang <wei.w.wang@intel.com>
Fixes: 1a937693 ("virtio: new feature to detect IOMMU device quirk")
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

This fixes the following warning:

  drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function
  'brcmf_usb_probe_phase2':
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2:
  warning: 'devinfo' may be used uninitialized in this function
  [-Wmaybe-uninitialized]
    mutex_unlock(&devinfo->dev_init_lock);

Fixes: 6d0507a7 ("brcmfmac: add parameter to pass error code in firmware callback")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

The error flow of mlx5e_create_netdev calls the cleanup call
of the given profile without checking if it exists, fix that.

Currently the VF reps don't register that callback and we crash
if getting into error -- can be reproduced by the user doing ctrl^C
while attempting to change the sriov mode from legacy to switchdev.

Fixes: 26e59d80 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reported-by: NSabrina Dubroca <sdubroca@redhat.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>