- 06 9月, 2020 12 次提交
-
-
由 Alistair Popple 提交于
Commit f45ec5ff ("userfaultfd: wp: support swap and page migration") introduced support for tracking the uffd wp bit during page migration. However the non-swap PTE variant was used to set the flag for zone device private pages which are a type of swap page. This leads to corruption of the swap offset if the original PTE has the uffd_wp flag set. Fixes: f45ec5ff ("userfaultfd: wp: support swap and page migration") Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NPeter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Link: https://lkml.kernel.org/r/20200825064232.10023-1-alistair@popple.id.auSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yang Shi 提交于
The syzbot reported the below use-after-free: BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline] BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline] BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996 CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 madvise_willneed mm/madvise.c:293 [inline] madvise_vma mm/madvise.c:942 [inline] do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 do_madvise mm/madvise.c:1169 [inline] __do_sys_madvise mm/madvise.c:1171 [inline] __se_sys_madvise mm/madvise.c:1169 [inline] __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 9992: kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482 vm_area_alloc+0x1c/0x110 kernel/fork.c:347 mmap_region+0x8e5/0x1780 mm/mmap.c:1743 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 9992: kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693 remove_vma+0x132/0x170 mm/mmap.c:184 remove_vma_list mm/mmap.c:2613 [inline] __do_munmap+0x743/0x1170 mm/mmap.c:2869 do_munmap mm/mmap.c:2877 [inline] mmap_region+0x257/0x1780 mm/mmap.c:1716 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It is because vma is accessed after releasing mmap_lock, but someone else acquired the mmap_lock and the vma is gone. Releasing mmap_lock after accessing vma should fix the problem. Fixes: 692fe624 ("mm: Handle MADV_WILLNEED through vfs_fadvise()") Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com Signed-off-by: NYang Shi <shy828301@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NJan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.4+] Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mrinal Pandey 提交于
The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a5 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a5 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: NMrinal Pandey <mrinalmni@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Tested-by: NLukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: NLukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandeySigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tobias Klauser 提交于
Commit 32927393 ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the definition of sysctl_max_threads to match its prototype in linux/sysctl.h which fixes the following sparse error/warning: kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces) kernel/fork.c:3050:47: expected void * kernel/fork.c:3050:47: got void [noderef] __user *buffer kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)): kernel/fork.c:3036:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... ) kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h): include/linux/sysctl.h:242:5: note: previously declared as: include/linux/sysctl.h:242:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... ) Fixes: 32927393 ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200825093647.24263-1-tklauser@distanz.chSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tobias Klauser 提交于
Commit 32927393 ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of proc_ipc_sem_dointvec to match ctl_table.proc_handler which fixes the following sparse error/warning: ipc/ipc_sysctl.c:94:47: warning: incorrect type in argument 3 (different address spaces) ipc/ipc_sysctl.c:94:47: expected void *buffer ipc/ipc_sysctl.c:94:47: got void [noderef] __user *buffer ipc/ipc_sysctl.c:194:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces)) ipc/ipc_sysctl.c:194:35: expected int ( [usertype] *proc_handler )( ... ) ipc/ipc_sysctl.c:194:35: got int ( * )( ... ) Fixes: 32927393 ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200825105846.5193-1-tklauser@distanz.chSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joerg Roedel 提交于
__apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e694 ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: NJoerg Roedel <jroedel@suse.de> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: NPavel Machek <pavel@ucw.cz> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
IA64 isn't really being maintained, so mark it as Odd Fixes only. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NTony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/7e719139-450f-52c2-59a2-7964a34eda1f@infradead.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Desaulniers 提交于
Nominate Nathan and myself to be point of contact for clang/LLVM related support, after a poll at the LLVM BoF at Linux Plumbers Conf 2020. While corporate sponsorship is beneficial, its important to not entrust the keys to the nukes with any one entity. Should Nathan and I find ourselves at the same employer, I would gladly step down. Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NSedat Dilek <sedat.dilek@gmail.com> Acked-by: NNathan Chancellor <natechancellor@gmail.com> Acked-by: NLukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: NMasahiro Yamada <masahiroy@kernel.org> Link: https://lkml.kernel.org/r/20200825143540.2948637-1-ndesaulniers@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert Richter 提交于
I am leaving Marvell and already do not have access to my @marvell.com email address. So switching over to my korg mail address or removing my address there another maintainer is already listed. For the entries there no other maintainer is listed I will keep looking into patches for Cavium systems for a while until someone from Marvell takes it over. Since I might have limited access to hardware and also limited time I changed state to 'Odd Fixes' for those entries. Signed-off-by: NRobert Richter <rric@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Ganapatrao Kulkarni <gkulkarni@marvell.com> Cc: Sunil Goutham <sgoutham@marvell.com> CC: Borislav Petkov <bp@alien8.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <wsa@kernel.org>, Link: https://lkml.kernel.org/r/20200824122050.31164-1-rric@kernel.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eugeniu Rosca 提交于
Commit 52f23478 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") suffered an update when picked up from LKML [1]. Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()' created a no-op statement. Fix it by sticking to the behavior intended in the original patch [1]. In addition, make freelist_corrupted() immune to passing NULL instead of &freelist. The issue has been spotted via static analysis and code review. [1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/ Fixes: 52f23478 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xunlei Pang 提交于
We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg doesn't have any reclaimable memory. It can be easily reproduced as below: watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204] CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12 Call Trace: shrink_lruvec+0x49f/0x640 shrink_node+0x2a6/0x6f0 do_try_to_free_pages+0xe9/0x3e0 try_to_free_mem_cgroup_pages+0xef/0x1f0 try_charge+0x2c1/0x750 mem_cgroup_charge+0xd7/0x240 __add_to_page_cache_locked+0x2fd/0x370 add_to_page_cache_lru+0x4a/0xc0 pagecache_get_page+0x10b/0x2f0 filemap_fault+0x661/0xad0 ext4_filemap_fault+0x2c/0x40 __do_fault+0x4d/0xf9 handle_mm_fault+0x1080/0x1790 It only happens on our 1-vcpu instances, because there's no chance for oom reaper to run to reclaim the to-be-killed process. Add a cond_resched() at the upper shrink_node_memcgs() to solve this issue, this will mean that we will get a scheduling point for each memcg in the reclaimed hierarchy without any dependency on the reclaimable memory in that memcg thus making it more predictable. Suggested-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NXunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NChris Down <chris@chrisdown.name> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
syzbot has reported an use-after-free in the uncharge_batch path BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline] BUG: KASAN: use-after-free in atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline] BUG: KASAN: use-after-free in atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline] BUG: KASAN: use-after-free in page_counter_cancel mm/page_counter.c:54 [inline] BUG: KASAN: use-after-free in page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155 Write of size 8 at addr ffff8880371c0148 by task syz-executor.0/9304 CPU: 0 PID: 9304 Comm: syz-executor.0 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:183 [inline] check_memory_region+0x2b5/0x2f0 mm/kasan/generic.c:192 instrument_atomic_write include/linux/instrumented.h:71 [inline] atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline] atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline] page_counter_cancel mm/page_counter.c:54 [inline] page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155 uncharge_batch+0x6c/0x350 mm/memcontrol.c:6764 uncharge_page+0x115/0x430 mm/memcontrol.c:6796 uncharge_list mm/memcontrol.c:6835 [inline] mem_cgroup_uncharge_list+0x70/0xe0 mm/memcontrol.c:6877 release_pages+0x13a2/0x1550 mm/swap.c:911 tlb_batch_pages_flush mm/mmu_gather.c:49 [inline] tlb_flush_mmu_free mm/mmu_gather.c:242 [inline] tlb_flush_mmu+0x780/0x910 mm/mmu_gather.c:249 tlb_finish_mmu+0xcb/0x200 mm/mmu_gather.c:328 exit_mmap+0x296/0x550 mm/mmap.c:3185 __mmput+0x113/0x370 kernel/fork.c:1076 exit_mm+0x4cd/0x550 kernel/exit.c:483 do_exit+0x576/0x1f20 kernel/exit.c:793 do_group_exit+0x161/0x2d0 kernel/exit.c:903 get_signal+0x139b/0x1d30 kernel/signal.c:2743 arch_do_signal+0x33/0x610 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:135 [inline] exit_to_user_mode_prepare+0x8d/0x1b0 kernel/entry/common.c:166 syscall_exit_to_user_mode+0x5e/0x1a0 kernel/entry/common.c:241 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Commit 1a3e1f40 ("mm: memcontrol: decouple reference counting from page accounting") reworked the memcg lifetime to be bound the the struct page rather than charges. It also removed the css_put_many from uncharge_batch and that is causing the above splat. uncharge_batch() is supposed to uncharge accumulated charges for all pages freed from the same memcg. The queuing is done by uncharge_page which however drops the memcg reference after it adds charges to the batch. If the current page happens to be the last one holding the reference for its memcg then the memcg is OK to go and the next page to be freed will trigger batched uncharge which needs to access the memcg which is gone already. Fix the issue by taking a reference for the memcg in the current batch. Fixes: 1a3e1f40 ("mm: memcontrol: decouple reference counting from page accounting") Reported-by: syzbot+b305848212deec86eabe@syzkaller.appspotmail.com Reported-by: syzbot+b5ea6fb6f139c8b9482b@syzkaller.appspotmail.com Signed-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NShakeel Butt <shakeelb@google.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Hugh Dickins <hughd@google.com> Link: https://lkml.kernel.org/r/20200820090341.GC5033@dhcp22.suse.czSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 9月, 2020 20 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Use uintptr_t when casting numbers to pointers - Keep output expected by 3rd parties: Turn off summary for interval mode by default. - BPF is in kernel space, make sure do_validate_kcore_modules() knows about that. - Explicitly call out event modifiers in the documentation. - Fix jevents() allocation of space for regular expressions. - Address libtraceevent build warnings on 32-bit arches. - Fix checking of functions returns using ERR_PTR() in 'perf bench'. * tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Add bpf image check to __map__is_kmodule perf record/stat: Explicitly call out event modifiers in the documentation perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) perf stat: Turn off summary for interval mode by default libtraceevent: Fix build warning on 32-bit arches perf jevents: Fix suspicious code in fixregex() perf parse-events: Use uintptr_t when casting numbers to pointers
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
-
由 Linus Torvalds 提交于
Merge gate page refcount fix from Dave Hansen: "During the conversion over to pin_user_pages(), gate pages were missed. The fix is pretty simple, and is accompanied by a new test from Andy which probably would have caught this earlier" * emailed patches from Dave Hansen <dave.hansen@linux.intel.com>: selftests/x86/test_vsyscall: Improve the process_vm_readv() test mm: fix pin vs. gup mismatch with gate pages
-
由 Andy Lutomirski 提交于
The existing code accepted process_vm_readv() success or failure as long as it didn't return garbage. This is too weak: if the vsyscall page is readable, then process_vm_readv() should succeed and, if the page is not readable, then it should fail. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Gate pages were missed when converting from get to pin_user_pages(). This can lead to refcount imbalances. This is reliably and quickly reproducible running the x86 selftests when vsyscall=emulate is enabled (the default). Fix by using try_grab_page() with appropriate flags passed. The long story: Today, pin_user_pages() and get_user_pages() are similar interfaces for manipulating page reference counts. However, "pins" use a "bias" value and manipulate the actual reference count by 1024 instead of 1 used by plain "gets". That means that pin_user_pages() must be matched with unpin_user_pages() and can't be mixed with a plain put_user_pages() or put_page(). Enter gate pages, like the vsyscall page. They are pages usually in the kernel image, but which are mapped to userspace. Userspace is allowed access to them, including interfaces using get/pin_user_pages(). The refcount of these kernel pages is manipulated just like a normal user page on the get/pin side so that the put/unpin side can work the same for normal user pages or gate pages. get_gate_page() uses try_get_page() which only bumps the refcount by 1, not 1024, even if called in the pin_user_pages() path. If someone pins a gate page, this happens: pin_user_pages() get_gate_page() try_get_page() // bump refcount +1 ... some time later unpin_user_pages() page_ref_sub_and_test(page, 1024)) ... and boom, we get a refcount off by 1023. This is reliably and quickly reproducible running the x86 selftests when booted with vsyscall=emulate (the default). The selftests use ptrace(), but I suspect anything using pin_user_pages() on gate pages could hit this. To fix it, simply use try_grab_page() instead of try_get_page(), and pass 'gup_flags' in so that FOLL_PIN can be respected. This bug traces back to the very beginning of the FOLL_PIN support in commit 3faa52c0 ("mm/gup: track FOLL_PIN pages"), which showed up in the 5.7 release. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Fixes: 3faa52c0 ("mm/gup: track FOLL_PIN pages") Reported-by: NPeter Zijlstra <peterz@infradead.org> Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: x86@kernel.org Cc: Jann Horn <jannh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Karsten Graul says: ==================== net/smc: fixes 2020-09-03 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes the toleration of older SMC implementations. Patch 2 takes care of a problem that happens when SMCR is used after SMCD initialization failed. Patch 3 fixes a problem with freed send buffers, and patch 4 corrects refcounting when SMC terminates due to device removal. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
When an ISM device is removed, all its linkgroups are terminated, i.e. all the corresponding connections are killed. Connection killing invokes smc_close_active_abort(), which decreases the sock refcount for certain states to simulate passive closing. And it cancels the close worker and has to give up the sock lock for this timeframe. This opens the door for a passive close worker or a socket close to run in between. In this case smc_close_active_abort() and passive close worker resp. smc_release() might do a sock_put for passive closing. This causes: [ 1323.315943] refcount_t: underflow; use-after-free. [ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130 [ 1323.316069] Kernel panic - not syncing: panic_on_warn set ... [ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1 [ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) [ 1323.316108] Call Trace: [ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8 [ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8 [ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288 [ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158 [ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130 [ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0 [ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238 [ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130 [ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130) [ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc] [ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0 [ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40 [ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278 [ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8 [ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520 [ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0 [ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38 [ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4 [ 1323.316446] 1 lock held by uperf/54469: [ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0 The patch rechecks sock state in smc_close_active_abort() after smc_close_cancel_work() to avoid duplicate decrease of sock refcount for the same purpose. Fixes: 611b63a1 ("net/smc: cancel tx worker in case of socket aborts") Reviewed-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a74 ("net/smc: remove freed buffer from list") Reviewed-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
SMC tries to make use of SMCD first. If a problem shows up, it tries to switch to SMCR. If the SMCD initializing problem shows up after the SMCD connection has already been initialized, field rx_off keeps the wrong SMCD value for SMCR, which results in corrupted data at the receiver. This patch adds an explicit (re-)setting of field rx_off to zero if the connection uses SMCR. Fixes: be244f28 ("net/smc: add SMC-D support in data transfer") Reviewed-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Older SMCR implementations had no link failover support and used one link only. Because the handshake protocol requires to try the establishment of a second link the old code sent a fake add_link message and declined any server response afterwards. The current code supports multiple links and inspects the received fake add_link message more closely. To tolerate the fake add_link messages smc_llc_is_local_add_link() needs an improved check of the message to be able to separate between locally enqueued and fake add_link messages. And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is invalid and reject the add_link request in that case. Fixes: c48254fa ("net/smc: move add link processing for new device into llc layer") Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: NDavid Christensen <drc@linux.vnet.ibm.com> Reported-by: NBaptiste Covolato <baptiste@arista.com> Fixes: db219973 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Olsa 提交于
When validating kcore modules the do_validate_kcore_modules function checks on every kernel module dso against modules record. The __map__is_kmodule check is used to get only kernel module dso objects through. Currently the bpf images are slipping through the check and making the validation to fail, so report falls back from kcore usage to kallsyms. Adding __map__is_bpf_image check for bpf image and adding it to __map__is_kmodule check. Fixes: 3c29d448 ("perf annotate: Add basic support for bpf_image") Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kim Phillips 提交于
Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf ("perf list: Document precise event sampling for AMD IBS") Signed-off-by: NKim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 YueHaibing 提交于
In case of error, the function perf_session__new() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR() Committer notes: This wasn't compiling due to an extraneous '{' not matched by a '}', fix it. Fixes: 13edc237 ("perf bench: Add a multi-threaded synthesize benchmark") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
There's a risk that outputting interval mode summaries by default breaks CSV consumers. It already broke pmu-tools/toplev. So now we turn off the summary by default but we create a new option '--summary' to enable the summary. This is active even when not using CSV mode. Before: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized 1.000265904 601 context-switches # 0.075 K/sec 1.000265904 10 cpu-migrations # 0.001 K/sec 1.000265904 0 page-faults # 0.000 K/sec 1.000265904 66,746,521 cycles # 0.008 GHz 1.000265904 71,874,398 instructions # 1.08 insn per cycle 1.000265904 13,356,781 branches # 1.668 M/sec 1.000265904 298,756 branch-misses # 2.24% of all branches 2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized 2.001857667 164 context-switches # 0.020 K/sec 2.001857667 10 cpu-migrations # 0.001 K/sec 2.001857667 2 page-faults # 0.000 K/sec 2.001857667 5,822,188 cycles # 0.001 GHz 2.001857667 2,186,170 instructions # 0.38 insn per cycle 2.001857667 442,378 branches # 0.055 M/sec 2.001857667 44,750 branch-misses # 10.12% of all branches Performance counter stats for 'system wide': 16,018.25 msec cpu-clock # 7.993 CPUs utilized 765 context-switches # 0.048 K/sec 20 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 72,568,709 cycles # 0.005 GHz 74,060,568 instructions # 1.02 insn per cycle 13,799,159 branches # 0.861 M/sec 343,506 branch-misses # 2.49% of all branches 2.004118489 seconds time elapsed After: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized 1.001336393 82 context-switches # 0.010 K/sec 1.001336393 8 cpu-migrations # 0.001 K/sec 1.001336393 0 page-faults # 0.000 K/sec 1.001336393 4,199,121 cycles # 0.001 GHz 1.001336393 1,373,991 instructions # 0.33 insn per cycle 1.001336393 270,681 branches # 0.034 M/sec 1.001336393 31,659 branch-misses # 11.70% of all branches 2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized 2.003905006 184 context-switches # 0.023 K/sec 2.003905006 8 cpu-migrations # 0.001 K/sec 2.003905006 2 page-faults # 0.000 K/sec 2.003905006 5,446,190 cycles # 0.001 GHz 2.003905006 2,312,547 instructions # 0.42 insn per cycle 2.003905006 451,691 branches # 0.056 M/sec 2.003905006 37,925 branch-misses # 8.40% of all branches root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary # time counts unit events 1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized 1.001313128 83 context-switches # 0.010 K/sec 1.001313128 8 cpu-migrations # 0.001 K/sec 1.001313128 0 page-faults # 0.000 K/sec 1.001313128 4,470,950 cycles # 0.001 GHz 1.001313128 1,440,045 instructions # 0.32 insn per cycle 1.001313128 283,222 branches # 0.035 M/sec 1.001313128 33,576 branch-misses # 11.86% of all branches 2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized 2.003857385 154 context-switches # 0.019 K/sec 2.003857385 8 cpu-migrations # 0.001 K/sec 2.003857385 2 page-faults # 0.000 K/sec 2.003857385 4,515,676 cycles # 0.001 GHz 2.003857385 2,180,449 instructions # 0.48 insn per cycle 2.003857385 435,254 branches # 0.054 M/sec 2.003857385 31,179 branch-misses # 7.16% of all branches Performance counter stats for 'system wide': 16,033.53 msec cpu-clock # 7.992 CPUs utilized 237 context-switches # 0.015 K/sec 16 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 8,986,626 cycles # 0.001 GHz 3,620,494 instructions # 0.40 insn per cycle 718,476 branches # 0.045 M/sec 64,755 branch-misses # 9.01% of all branches 2.006124542 seconds time elapsed Fixes: c7e5b328 ("perf stat: Report summary for interval mode") Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
Fixed a compilation warning for casting to pointer from integer of different size on 32-bit platforms. Reported-by: NArnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by: NTzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The new string should have enough space for the original string and the back slashes IMHO. Fixes: fbc2844e ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv") Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Reviewed-by: NIan Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
To address these errors found when cross building from x86_64 to MIPS little endian 32-bit: CC /tmp/build/perf/util/parse-events-bison.o util/parse-events.y: In function 'parse_events_parse': util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 514 | (void *) $2, $6, $4); | ^ util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 531 | (void *) $2, NULL, $4)) { | ^ util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 547 | (void *) $2, $4, 0); | ^ util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 564 | (void *) $2, NULL, 0)) { | ^ Fixes: cabbf268 ("perf parse: Before yyabort-ing free components") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Paul Barker 提交于
In the "single port" example code for configuring a DSA switch without tagging support from userspace the command to bring up the "lan2" link was typo'd. Signed-off-by: NPaul Barker <pbarker@konsulko.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock由 Linus Torvalds 提交于
Pull misc build failure fixes from Mike Rapoport: "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze. Some configurations of ia64 and microblaze use min_low_pfn and max_low_pfn in pfn_valid(). This causes build failures for modules that use pfn_valid(). The fix is to add EXPORT_SYMBOL() for these variables on ia64 and microblaze" * tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix min_low_pfn/max_low_pfn build errors microblaze: fix min_low_pfn/max_low_pfn build errors
-
- 03 9月, 2020 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull affs fix from David Sterba: "One fix to make permissions work the same way as on AmigaOS" * tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix basic permission bits to actually work
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM
-
由 Dan Murphy 提交于
Fix the registers being written to as the values were being over written when writing the same registers. Fixes: caabee5b ("net: phy: dp83867: support Wake on LAN") Signed-off-by: NDan Murphy <dmurphy@ti.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Louis Peens 提交于
Fix an issue where the driver wrongly detected ipv6 neighbour updates from the NFP as corrupt. Add a reserved field on the kernel side so it is similar to the ipv4 version of the struct and has space for the extra bytes from the card. Fixes: 9ea9bfa1 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw") Signed-off-by: NLouis Peens <louis.peens@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tetsuo Handa 提交于
syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation. ---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ---------- One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called. The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless. [1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2Reported-by: Nsyzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com> Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Cited commit added the possible value of '2', but it cannot be set. Fix it by adjusting the maximum value to '2'. This is consistent with the corresponding IPv4 sysctl. Before: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 0 After: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 2 Fixes: d8f74f09 ("ipv6: Support multipath hashing on inner IP pkts") Signed-off-by: NIdo Schimmel <idosch@nvidia.com> Reviewed-by: NStephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xie He 提交于
Change the default value of hard_header_len in hdlc.c from 16 to 0. Currently there are 6 HDLC protocol drivers, among them: hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when attaching the protocol, overriding the default. So this patch does not affect them. hdlc_raw and hdlc_fr don't set hard_header_len when attaching the protocol. So this patch will change the hard_header_len of the HDLC device for them from 16 to 0. This is the correct change because both hdlc_raw and hdlc_fr don't have header_ops, and the code in net/packet/af_packet.c expects the value of hard_header_len to be consistent with header_ops. In net/packet/af_packet.c, in the packet_snd function, for AF_PACKET/DGRAM sockets it would reserve a headroom of hard_header_len and call dev_hard_header to fill in that headroom, and for AF_PACKET/RAW sockets, it does not reserve the headroom and does not call dev_hard_header, but checks if the user has provided a header of length hard_header_len (in function dev_validate_header). Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: NXie He <xie.he.0141@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-