- 09 3月, 2015 8 次提交
-
-
由 Benjamin Tissoires 提交于
The Fimware 8.1 has a bug in which the extra buttons are only sent when the ExtBit is 1. This should be fixed in a future FW update which should have a bump of the minor version. Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle button of the trackstick (attached to the touchpad serio device, of course) seems to get lost. Actually, the touchpads reports 3 extra buttons, which falls in the switch below to the '2' case. Let's handle the case of odd numbers also, so that the middle button finds its way back. Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Benjamin Tissoires 提交于
Post-2013 Lenovo laptops provide correct min/max dimensions, which are different with the ones currently quirked. According to https://bugzilla.kernel.org/show_bug.cgi?id=91541 the following board ids are assigned in the post-2013 touchpads: t440p/t440s: LEN0036 -> 2964/2962 t540p: LEN0034 -> 2964 Using 2961 as the common minimum makes these 3 laptops OK. We may need to update those values later if other pnp_ids has a lower board_id. Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Daniel Martin 提交于
Add a min/max range for board ids to the min/max coordinates quirk. This makes it possible to restrict quirks to specific models based upon their board id. The define ANY_BOARD_ID (0) serves as a wild card. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: NDaniel Martin <daniel.martin@secunet.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Daniel Martin 提交于
The firmware of the X240 (LEN0035, 2013/12) exposes the same values x [1232..5710], y [1156..4696] as the quirk applies. Cc: stable@vger.kernel.org Signed-off-by: NDaniel Martin <consume.noise@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Daniel Martin 提交于
Query the min dimensions even if the check SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the firmware version 8.1 is safe. With that we don't need quirks for post-2013 models anymore as they expose correct min and max dimensions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: NDaniel Martin <consume.noise@gmail.com> re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1 Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Daniel Martin 提交于
Logging the dimension values we queried and the values we use from a quirk to overwrite can be helpful for debugging. This partly relates to bug: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: NDaniel Martin <consume.noise@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Daniel Martin 提交于
Split the function synaptics_resolution() into synaptics_resolution() and synaptics_quirks(). synaptics_resolution() will be called before synaptics_quirks() to query dimensions and resolutions before overwriting them with quirks. Cc: stable@vger.kernel.org Signed-off-by: NDaniel Martin <consume.noise@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 1月, 2015 1 次提交
-
-
由 Peter Hutterer 提交于
LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Cc: stable@vger.kernel.org Reported-and-tested-by: NBjoern Olausson <bjoern@olausson.de> Signed-off-by: NPeter Hutterer <peter.hutterer@who-t.net> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 11月, 2014 1 次提交
-
-
由 Ben Sagal 提交于
The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Cc: stable@vger.kernel.org Signed-off-by: NBinyamin Sagal <bensagal@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 07 11月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748Reported-and-tested-by: NJoschi Brauchle <joschibrauchle@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 10月, 2014 1 次提交
-
-
由 Dmitry Torokhov 提交于
Unfortunately, ForcePad capability is not actually exported over PS/2, so we have to resort to DMI checks. Cc: stable@vger.kernel.org Reported-by: NNicole Faerber <nicole.faerber@kernelconcepts.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 13 9月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
The matches_pnp_id function from the synaptics driver is useful for other drivers too. Make it a generic psmouse helper function. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 10 9月, 2014 1 次提交
-
-
由 Dmitry Torokhov 提交于
ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Cc: stable@vger.kernel.org Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 8月, 2014 1 次提交
-
-
由 Henrik Rydberg 提交于
The profile sensor clickpad in a Cr-48 Chromebook does a reasonable job of tracking individual fingers. This tracking isn't perfect, but, experiments show that it works better than just passing "semi-mt" data to userspace, and making userspace try to deduce where the fingers are given a bounding box. This patch tries to report correct two-finger positions instead of the {(min_x, min_y), (max_x, max_y)} for profile sensor clickpads on Cr-48 chromebooks. Note that this device's firmware always reports the higher (smaller y) finger in the "sgm" packet, and the lower (larger y) finger in the "agm" packet. Thus, when a new finger arrives on the pad, the kernel driver uses input core's contact tracking facilities to match contacts with slots. Inspired by patch by Daniel Kurtz <djkurtz@chromium.org> and Chung-yih Wang <cywang@chromium.org> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Reviewed-by: NBenson Leung <bleung@chromium.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 8月, 2014 1 次提交
-
-
由 Dmitry Torokhov 提交于
Semi-MT devices are pointers too, so let's tell that to input_mt_init_slots(), as well as let it set up the devices as semi-MT, instead of us doing it manually. Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Reviewed-by: NBenson Leung <bleung@chromium.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 7月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1114768 Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 6月, 2014 1 次提交
-
-
由 Benjamin Tissoires 提交于
commit 421e08c4 fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by: NPeter Hutterer <peter.hutterer@who-t.net> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 5月, 2014 3 次提交
-
-
由 Hans de Goede 提交于
Most of the affected models share pnp-ids for the touchpad. So switching to pnp-ids give us 2 advantages: 1) It shrinks the quirk list 2) It will lower the new quirk addition frequency, ie the recently added W540 quirk would not have been necessary since it uses the same LEN0034 pnp ids as other models already added before it As an added bonus it actually puts the quirk on the actual psmouse, rather then on the machine, which is technically more correct. Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
This is a preparation patch for simplifying the min/max quirk table. Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
The T540p has a touchpad with pnp-id LEN0034, all the models with this pnp-id have the same min/max values, except the T540p where the values are slightly off. Fix them to be identical. This is a preparation patch for simplifying the quirk table. Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 5月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1096436 Cc: stable@vger.kernel.org Tested-and-reported-by: ajayr@bigfoot.com Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 4月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 4月, 2014 2 次提交
-
-
由 Hans de Goede 提交于
We expect that all the Haswell series will need such quirks, sigh. The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad, with the same min/max issue. The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation. The X1 and T431s share a PnPID with the T540p, but the reported ranges are closer to those of the T440s. HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me, S1 Yoga and X1 are written by Benjamin Tissoires. Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the X240, X1 uses the same touchpad as the T440. Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
Check PNP ID of the PS/2 AUX port and report INPUT_PROP_TOPBUTTONPAD property for for touchpads with top button areas. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 3月, 2014 2 次提交
-
-
由 Hans de Goede 提交于
This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Benjamin Tissoires 提交于
The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> CC: stable@vger.kernel.org Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 13 8月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 05 6月, 2013 1 次提交
-
-
由 Eric Miao 提交于
In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: NDaniel Manrique <daniel.manrique@canonical.com> Signed-off-by: NJames M Leddy <james.leddy@canonical.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 2月, 2013 1 次提交
-
-
由 Henrik Rydberg 提交于
To properly setup event parameters for emulated events, pass the appropriate flag to the slot initialization function. Also, all MT-related events should be setup before initialization. Incidentally, this solves the issue of doubly filtered pointer events. Reported-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 14 2月, 2013 1 次提交
-
-
由 Daniel Kurtz 提交于
Investigating the following gesture highlighted two slight implementation errors with choosing which slots to report in which slot when multiple contacts are present: Action SGM AGM (MTB slot:Contact) 1. Touch contact 0 (0:0) 2. Touch contact 1 (0:0, 1:1) 3. Lift contact 0 (1:1) 4. Touch contacts 2,3 (0:2, 1:3) In step 4, slot 1 was not being cleared first, which means the same tracking ID was being used for reporting both the old contact 1 and the new contact 3. This could result in "drumroll", where the old contact 1 would appear to suddenly jump to new finger 3 position. Similarly, if contacts 2 & 3 are not detected at the same sample, step 4 is split into two: Action SGM AGM (MTB slot:contact) 1. Touch contact 0 (0:0) 2. Touch contact 1 (0:0, 1:1) 3. Lift contact 0 (1:1) 4. Touch contact 2 (0:2, 1:1) 5. Touch contact 3 (0:2, 1:3) In this case, there was also a bug. In step 4, when contact 1 moves from SGM to AGM and contact 2 is first reported in SGM, slot 0 was actually empty. So slot 0 can be used to report the new SGM (contact 0), immediately. Since it was empty, contact 2 in slot 0 will get a new tracking ID. Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 9月, 2012 1 次提交
-
-
由 Seth Forshee 提交于
Commit c0394506 (Input: synaptics - handle out of bounds values from the hardware) caused any hardware reported values over 7167 to be treated as a wrapped-around negative value. It turns out that some firmware uses the value 8176 to indicate a finger near the edge of the touchpad whose actual position cannot be determined. This value now gets treated as negative, which can cause pointer jumps and broken edge scrolling on these machines. I only know of one touchpad which reports negative values, and this hardware never reports any value lower than -8 (i.e. 8184). Moving the threshold for treating a value as negative up to 8176 should work fine then for any hardware we currently know about, and since we're dealing with unspecified behavior it's probably the best we can do. The special 8176 value is also likely to result in sudden jumps in position, so let's also clamp this to the maximum specified value for the axis. BugLink: http://bugs.launchpad.net/bugs/1046512 https://bugzilla.kernel.org/show_bug.cgi?id=46371 Cc: stable@vger.kernel.org Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Tested-by: NAlan Swanson <swanson@ukfsn.org> Tested-by: NArteom <arutemus@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 9月, 2012 1 次提交
-
-
由 Henrik Rydberg 提交于
Preparing to move more repeated code into the mt core, add a flags argument to the input_mt_slots_init() function. Reviewed-and-tested-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: NPing Cheng <pingc@wacom.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
- 25 7月, 2012 1 次提交
-
-
由 Seth Forshee 提交于
The touchpad on the Acer Aspire One D250 will report out of range values in the extreme lower portion of the touchpad. These appear as abrupt changes in the values reported by the hardware from very low values to very high values, which can cause unexpected vertical jumps in the position of the mouse pointer. What seems to be happening is that the value is wrapping to a two's compliment negative value of higher resolution than the 13-bit value reported by the hardware, with the high-order bits being truncated. This patch adds handling for these values by converting them to the appropriate negative values. The only tricky part about this is deciding when to treat a number as negative. It stands to reason that if out of range values can be reported on the low end then it could also happen on the high end, so not all out of range values should be treated as negative. The approach taken here is to split the difference between the maximum legitimate value for the axis and the maximum possible value that the hardware can report, treating values greater than this number as negative and all other values as positive. This can be tweaked later if hardware is found that operates outside of these parameters. BugLink: http://bugs.launchpad.net/bugs/1001251 Cc: stable@vger.kernel.org Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 7月, 2012 1 次提交
-
-
由 Daniel Kurtz 提交于
Read the Firmware ID and Board Number from a synaptics device at init and display them in the system log. Device behavior is very board and firmware dependent. It may prove useful for users to include this information when providing bug reports or other feedback. Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 5月, 2012 1 次提交
-
-
由 JJ Ding 提交于
Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of a compile warning when we don't select synaptics support. drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function] Signed-off-by: NJJ Ding <dgdunix@gmail.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 4月, 2012 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
commit 7968a5dd Input: synaptics - add support for Relative mode Accidentally broke support for advanced gestures (multitouch) on some trackpads such as the one in my ThinkPad X220 by incorretly changing the condition for enabling them. This restores it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org [3.3] Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 12 12月, 2011 1 次提交
-
-
由 Dmitry Torokhov 提交于
Synaptics touchpads on several Dell laptops, particularly Vostro V13 systems, may not respond properly to PS/2 commands and queries immediately after resuming from suspend to RAM. This leads to unresponsive touchpad after suspend/resume cycle. Adding a 1-second delay after resetting the device allows touchpad to finish initializing (calibrating?) and start reacting properly. Reported-by: NDaniel Manrique <daniel.manrique@canonical.com> Tested-by: NDaniel Manrique <daniel.manrique@canonical.com> Cc: stable@kernel.org Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 16 11月, 2011 1 次提交
-
-
由 Daniel Drake 提交于
We have determined that the jumpiness previously seen when using the synaptics kernel mouse driver on OLPC XO was due to not using the synaptics X11 userspace driver - the xf86-input-evdev driver was interpreting 'finger near pad' signals as movements. Newer versions of xf86-input-evdev fix this issue. Additionally, the synaptics kernel driver is now usable on this platform, but only when run in relative mode. Update the comment and refine the check to allow the synaptics driver to run on OLPC XO in relative mode. We will continue investigating the EC issue as time becomes available. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 11月, 2011 1 次提交
-
-
由 Daniel Drake 提交于
Currently, the synaptics driver puts the device into Absolute mode. As explained in the synaptics documentation section 3.2, in this mode, the device sends a continuous stream of packets at the maximum rate to the host when the user's fingers are near or on the pad or pressing buttons, and continues streaming for 1 second afterwards. These packets are even sent when there is no new information to report, even when they are duplicates of the previous packet. For embedded systems this is a bit much - it results in a huge and uninterrupted stream of interrupts at high rate. This patch adds support for Relative mode, which can be selected as a new psmouse protocol. In this mode, the device does not send duplicate packets and acts like a standard PS/2 mouse. However, synaptics-specific functionality is still available, such as the ability to set the packet rate, and rather than disabling gestures and taps at the hardware level unconditionally, a 'synaptics_disable_gesture' sysfs attribute has been added to allow control of this functionality. This solves a long standing OLPC issue: synaptics hardware enables tap to click by default (even in the default relative mode), but we have found this to be inappropriate for young children and first time computer users. Enabling the synaptics driver disables tap-to-click, but we have previously been unable to use this because it also enables Absolute mode, which is too "spammy" for our desires and actually overloads our EC with its continuous stream of packets. Now we can enable the synaptics driver, disabling tap to click while retaining the less noisy Relative mode. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-