The semctl GETZCNT returns the number of semops waiting for the
specified semaphore to become zero.  After commit 9f1bc2c9
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.

This bug broke dbench; it works again with this patch applied.
Signed-off-by: NRik van Riel <riel@redhat.com>
Reported-by: NKent Overstreet <koverstreet@google.com>
Tested-by: NKent Overstreet <koverstreet@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more vfs fixes from Al Viro:
 "Regression fix from Geert + yet another open-coded kernel_read()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ecryptfs: don't open-code kernel_read()
  xtensa simdisk: Fix proc_create_data() conversion fallout

Pull btrfs update from Chris Mason:
 "These are mostly fixes.  The biggest exceptions are Josef's skinny
  extents and Jan Schmidt's code to rebuild our quota indexes if they
  get out of sync (or you enable quotas on an existing filesystem).

  The skinny extents are off by default because they are a new variation
  on the extent allocation tree format.  btrfstune -x enables them, and
  the new format makes the extent allocation tree about 30% smaller.

  I rebased this a few days ago to rework Dave Sterba's crc checks on
  the super block, but almost all of these go back to rc6, since I
  though 3.9 was due any minute.

  The biggest missing fix is the tracepoint bug that was hit late in
  3.9.  I ran into problems with that in overnight testing and I'm still
  tracking it down.  I'll definitely have that fixed for rc2."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (101 commits)
  Btrfs: allow superblock mismatch from older mkfs
  btrfs: enhance superblock checks
  btrfs: fix misleading variable name for flags
  btrfs: use unsigned long type for extent state bits
  Btrfs: improve the loop of scrub_stripe
  btrfs: read entire device info under lock
  btrfs: remove unused gfp mask parameter from release_extent_buffer callchain
  btrfs: handle errors returned from get_tree_block_key
  btrfs: make static code static & remove dead code
  Btrfs: deal with errors in write_dev_supers
  Btrfs: remove almost all of the BUG()'s from tree-log.c
  Btrfs: deal with free space cache errors while replaying log
  Btrfs: automatic rescan after "quota enable" command
  Btrfs: rescan for qgroups
  Btrfs: split btrfs_qgroup_account_ref into four functions
  Btrfs: allocate new chunks if the space is not enough for global rsv
  Btrfs: separate sequence numbers for delayed ref tracking and tree mod log
  btrfs: move leak debug code to functions
  Btrfs: return free space in cow error path
  Btrfs: set UUID in root_item for created trees
  ...

Pull xfs update (#2) from Ben Myers:

 - add CONFIG_XFS_WARN, a step between zero debugging and
   CONFIG_XFS_DEBUG.

 - fix attrmulti and attrlist to fall back to vmalloc when kmalloc
   fails.

* tag 'for-linus-v3.10-rc1-2' of git://oss.sgi.com/xfs/xfs:
  xfs: fallback to vmalloc for large buffers in xfs_compat_attrlist_by_handle
  xfs: fallback to vmalloc for large buffers in xfs_attrlist_by_handle
  xfs: introduce CONFIG_XFS_WARN

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull more NFS client bugfixes from Trond Myklebust:

 - Ensure that we match the 'sec=' mount flavour against the server list

 - Fix the NFSv4 byte range locking in the presence of delegations

 - Ensure that we conform to the NFSv4.1 spec w.r.t.  freeing lock
   stateids

 - Fix a pNFS data server connection race

* tag 'nfs-for-3.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS4.1 Fix data server connection race
  NFSv3: match sec= flavor against server list
  NFSv4.1: Ensure that we free the lock stateid on the server
  NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC call
  SUNRPC: Don't spam syslog with "Pseudoflavor not found" messages
  NFSv4.x: Fix handling of partially delegated locks

Pull networking update from David Miller:

 1) Propagate return error values properly in irda, spider_net, sfc, and
    bfin_mac.  From Wei Yongjun.

 2) Fix fec driver OOPS on rapid link up/down, from Frank Li.

 3) FIX VF resource allocation and chip message payload length errors in
    be2net driver, from Sathya Perla.

 4) Fix inner protocol inspection during GSO from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  if_cablemodem.h: Add parenthesis around ioctl macros
  gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()
  net: fec: fix kernel oops when plug/unplug cable many times
  bfin_mac: fix error return code in bfin_mac_probe()
  sfc: fix return value check in efx_ptp_probe_channel()
  net/spider_net: fix error return code in spider_net_open()
  net/irda: fix error return code in bfin_sir_open()
  net: of_mdio: fix behavior on missing phy device
  sierra_net: keep status interrupt URB active
  usbnet: allow status interrupt URB to always be active
  qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card
  be2net: disable TX in be_close()
  be2net: fix EQ from getting full while cleaning RX CQ
  be2net: fix payload_len value for GET_MAC_LIST cmd req
  be2net: provision VF resources before enabling SR-IOV

Pull PCI updates from Bjorn Helgaas:
 "MSI:
      PCI: Set ->mask_pos correctly
  Hotplug:
      PCI: Delay final fixups until resources are assigned
  Moorestown:
      x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"

* tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Delay final fixups until resources are assigned
  x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0
  PCI: Set ->mask_pos correctly

arch/xtensa/platforms/iss/simdisk.c: In function 'proc_read_simdisk':
arch/xtensa/platforms/iss/simdisk.c:220:12: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/xtensa/platforms/iss/simdisk.c: In function 'proc_write_simdisk':
arch/xtensa/platforms/iss/simdisk.c:241:38: error: 'buffer' undeclared (first use in this function)
arch/xtensa/platforms/iss/simdisk.c:241:38: note: each undeclared identifier is reported only once for each function it appears in

Introduced by commit a69755b1 ("xtensa
simdisk: switch to proc_create_data()")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull MTD update from David Woodhouse:

 - Lots of cleanups from Artem, including deletion of some obsolete
   drivers

 - Support partitions larger than 4GiB in device tree

 - Support for new SPI chips

* tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits)
  mtd: omap2: Use module_platform_driver()
  mtd: bf5xx_nand: Use module_platform_driver()
  mtd: denali_dt: Remove redundant use of of_match_ptr
  mtd: denali_dt: Change return value to fix smatch warning
  mtd: denali_dt: Use module_platform_driver()
  mtd: denali_dt: Fix incorrect error check
  mtd: nand: subpage write support for hardware based ECC schemes
  mtd: omap2: use msecs_to_jiffies()
  mtd: nand_ids: use size macros
  mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
  mtd: add 4 Toshiba nand chips for the full-id case
  mtd: add the support to parse out the full-id nand type
  mtd: add new fields to nand_flash_dev{}
  mtd: sh_flctl: Use of_match_ptr() macro
  mtd: gpio: Use of_match_ptr() macro
  mtd: gpio: Use devm_kzalloc()
  mtd: davinci_nand: Use of_match_ptr()
  mtd: dataflash: Use of_match_ptr() macro
  mtd: remove h720x flash support
  mtd: onenand: remove OneNAND simulator
  ...

Pull firewure updates from Stefan Richter:
  - fix controller removal when controller is in suspended state
  - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l
  - fix a startup issue with Agere/LSI FW643-e2
  - error logging improvements and other small updates

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: dump_stack() for PHY regs read/write failures
  firewire: ohci: Improve bus reset error messages
  firewire: ohci: Alias dev_* log functions
  firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8
  firewire: ohci: fix VIA VT6306 video reception
  firewire: ohci: Check LPS before register access on pci removal
  firewire: ohci: Fix double free_irq()
  firewire: remove unnecessary alloc/OOM messages
  firewire: sbp2: replace BUG_ON by WARN_ON
  firewire: core: remove an always false test
  firewire: Remove two unneeded checks for macros

Pull two small EDAC fixes from Borislav Petkov.

* tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't give write permission to read-only files
  EDAC, mc_sysfs.c: Fix string array pointer types

Pull watchdog update from Wim Van Sebroeck:
 "Fix a kdump issue in hpwdt and a possible NULL dereference"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Fix race condition in registration code
  watchdog: Convert to devm_ioremap_resource()

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select

Pull slave-dmaengine updates from Vinod Koul:
 "This time we have dmatest improvements from Andy along with dw_dmac
  fixes.  He has also done support for acpi for dmanegine.

  Also we have bunch of fixes going in DT support for dmanegine for
  various folks.  Then Haswell and other ioat changes from Dave and
  SUDMAC support from Shimoda."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  dma: tegra: implement suspend/resume callbacks
  dma:of: Use a mutex to protect the of_dma_list
  dma: of: Fix of_node reference leak
  dmaengine: sirf: move driver init from module_init to subsys_initcall
  sudmac: add support for SUDMAC
  dma: sh: add Kconfig
  at_hdmac: move to generic DMA binding
  ioatdma: ioat3_alloc_sed can be static
  ioatdma: Adding write back descriptor error status support for ioatdma 3.3
  ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap
  ioatdma: Adding support for 16 src PQ ops and super extended descriptors
  ioatdma: Removing hw bug workaround for CB3.x .2 and earlier
  dw_dmac: add ACPI support
  dmaengine: call acpi_dma_request_slave_channel as well
  dma: acpi-dma: introduce ACPI DMA helpers
  dma: of: Remove unnecessary list_empty check
  DMA: OF: Check properties value before running be32_to_cpup() on it
  DMA: of: Constant names
  ioatdma: skip silicon bug workaround for pq_align for cb3.3
  ioatdma: Removing PQ val disable for cb3.3
  ...

Pull thermal management update from Zhang Rui:
 "The most important one is to build thermal core and governor and cpu
  cooling code into one module.  This fixes a regression that thermal
  core does not work if it is built as module, since 3.7.  I'll backport
  them to stable kernel once those changes are in upstream.

  The largest batch is the thermal kernel-doc & coding style
  updates/cleanups from Eduardo.

  Highlights:

   - build all thermal framework code into one module to fix a
     regression that thermal does not work if it is built as module.

   - Marvell Armada 370/XP thermal sensor driver

   - thermal core/cpu cooling kernel-doc & coding style updates and
     cleanups.

   - Add Eduardo Valentin as thermal sub-maintainer, both in mailing
     list and patchwork.  He will help me on arm thermal drivers."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (68 commits)
  thermal: db8500_cpufreq_cooling: remove usage of IS_ERR_OR_NULL()
  thermal: thermal_core: remove usage of IS_ERR_OR_NULL
  thermal: cpu_cooling: improve line breaking
  thermal: cpu_cooling: alignment improvements
  thermal: cpu_cooling: remove checkpatch.pl warning
  thermal: cpu_cooling: remove trailing blank line
  thermal: cpu_cooling: align on open parenthesis
  thermal: cpu_cooling: standardize comment style
  thermal: cpu_cooling: standardize end of function
  thermal: cpu_cooling: remove trailing white spaces
  Thermal: update documentation for thermal_zone_device_register
  thermal: update kernel-doc for thermal_zone_device_register
  thermal: update kernel-doc for create_trip_attrs
  thermal: update kernel-doc for thermal_cooling_device_register
  thermal: update kernel-doc for thermal_zone_unbind_cooling_device
  thermal: update kernel-doc for thermal_zone_bind_cooling_device
  thermal: use EXPORT_SYMBOL_GPL
  thermal: rename notify_thermal_framework to thermal_notify_framework
  thermal: update driver license
  thermal: use strlcpy instead of strcpy
  ...

I get the following warning on boot:

------------[ cut here ]------------
WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0()
Hardware name:  -[8737R2A]-
Write permission without 'store'
...
</snip>

Drilling down, this is related to dynamic channel ce_count attribute
files sporting a S_IWUSR mode without a ->store() function. Looking
around, it appears that they aren't supposed to have a ->store()
function. So remove the bogus write permission to get rid of the
warning.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: <stable@vger.kernel.org> # 3.[89]
[ shorten commit message ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

A race condition exists when registering the first watchdog device.
Sequence of events:

- watchdog_register_device calls watchdog_dev_register
- watchdog_dev_register creates the watchdog misc device by calling
  misc_register.
  At that time, the matching character device (/dev/watchdog0) does not yet
  exist, and old_wdd is not set either.
- Userspace gets an event and opens /dev/watchdog
- watchdog_open is called and sets wdd = old_wdd, which is still NULL,
  and tries to dereference it. This causes the kernel to panic.

Seen with systemd trying to open /dev/watchdog immediately after
it was created.
Reported-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Pull InfiniBand/RDMA changes from Roland Dreier:
 - XRC transport fixes
 - Fix DHCP on IPoIB
 - mlx4 preparations for flow steering
 - iSER fixes
 - miscellaneous other fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits)
  IB/iser: Add support for iser CM REQ additional info
  IB/iser: Return error to upper layers on EAGAIN registration failures
  IB/iser: Move informational messages from error to info level
  IB/iser: Add module version
  mlx4_core: Expose a few helpers to fill DMFS HW strucutures
  mlx4_core: Directly expose fields of DMFS HW rule control segment
  mlx4_core: Change a few DMFS fields names to match firmare spec
  mlx4: Match DMFS promiscuous field names to firmware spec
  mlx4_core: Move DMFS HW structs to common header file
  IB/mlx4: Set link type for RAW PACKET QPs in the QP context
  IB/mlx4: Disable VLAN stripping for RAW PACKET QPs
  mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level
  RDMA/iwcm: Don't touch cmid after dropping reference
  IB/qib: Correct qib_verbs_register_sysfs() error handling
  IB/ipath: Correct ipath_verbs_register_sysfs() error handling
  RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled
  SRPT: Fix odd use of WARN_ON()
  IPoIB: Fix ipoib_hard_header() return value
  RDMA: Rename random32() to prandom_u32()
  RDMA/cxgb3: Fix uninitialized variable
  ...

Pull arm64 update from Catalin Marinas:

 - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32
   specifics (the 'gic' branch merged), it can be enabled on arm64.

 - Enable arm64 support for poweroff/restart (for code under
   drivers/power/reset/).

 - Fixes (dts file, exception handling, bitops)

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: Treat the bitops index argument as an 'int'
  arm64: Ignore the 'write' ESR flag on cache maintenance faults
  arm64: dts: fix #address-cells for foundation-v8
  arm64: vexpress: Add support for poweroff/restart
  arm64: Enable support for the ARM GIC interrupt controller

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches.
   - introduce a new gloabl lock scheme
   - add tracepoints on several major functions
   - fix the overall cleaning process focused on victim selection
   - apply the block plugging to merge IOs as much as possible
   - enhance management of free nids and its list
   - enhance the readahead mode for node pages
   - address several cretical deadlock conditions
   - reduce lock_page calls

  The other minor bug fixes and enhancements are as follows.
   - calculation mistakes: overflow
   - bio types: READ, READA, and READ_SYNC
   - fix the recovery flow, data races, and null pointer errors"

* tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
  f2fs: cover free_nid management with spin_lock
  f2fs: optimize scan_nat_page()
  f2fs: code cleanup for scan_nat_page() and build_free_nids()
  f2fs: bugfix for alloc_nid_failed()
  f2fs: recover when journal contains deleted files
  f2fs: continue to mount after failing recovery
  f2fs: avoid deadlock during evict after f2fs_gc
  f2fs: modify the number of issued pages to merge IOs
  f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry.
  f2fs: fix inconsistent using of NM_WOUT_THRESHOLD
  f2fs: check truncation of mapping after lock_page
  f2fs: enhance alloc_nid and build_free_nids flows
  f2fs: add a tracepoint on f2fs_new_inode
  f2fs: check nid == 0 in add_free_nid
  f2fs: add REQ_META about metadata requests for submit
  f2fs: give a chance to merge IOs by IO scheduler
  f2fs: avoid frequent background GC
  f2fs: add tracepoints to debug checkpoint request
  f2fs: add tracepoints for write page operations
  f2fs: add tracepoints to debug the block allocation
  ...

Pull Hexagon fixes from Richard Kuo:
 "A bug fix and a Kconfig cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  HEXAGON: Remove non existent reference to GENERIC_KERNEL_EXECVE & GENERIC_KERNEL_THREAD
  Hexagon: fix register used to call do_work_pending

Commit 8a965b3b ("mm, slab_common: Fix bootstrap creation of kmalloc
caches") introduced a regression that caused us to crash early during
boot.  The commit was introducing ordering of slab creation, making sure
two odd-sized slabs were created after specific powers of two sizes.

But, if any of the power of two slabs were created earlier during boot,
slabs at index 1 or 2 might not get created at all.  This patch makes
sure none of the slabs get skipped.

Tony Lindgren bisected this down to the offending commit, which really
helped because bisect kept bringing me to almost but not quite this one.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlike meta data server mounts which support multiple mount points to
the same server via struct nfs_server, data servers support a single connection.

Concurrent calls to setup the data server connection can race where the first
call allocates the nfs_client struct, and before the cache struct nfs_client
pointer can be set, a second call also tries to setup the connection, finds the
already allocated nfs_client, bumps the reference count, re-initializes the
session,etc. This results in a hanging data server session after umount.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Protect the SIOCGCM* ioctl macros with parenthesis.
Reported-by: NPaul Wouters <pwouters@redhat.com>
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than having logic to calculate inner protocol in every
tunnel gso handler move it to gso code. This simplifies code.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

reproduce steps
 1. flood ping from other machine
 	ping -f -s 41000 IP
 2. run below script
    while [ 1 ]; do ethtool -s eth0 autoneg off;
    sleep 3;ethtool -s eth0 autoneg on; sleep 4; done;

You can see oops in one hour.

The reason is fec_restart clear BD but NAPI may use it.
The solution is disable NAPI and stop xmit when reset BD.
disable NAPI may sleep, so fec_restart can't be call in
atomic context.
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Tested-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error, the function ptp_clock_register() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return -ENOMEM in the irlap_open() error handling case instead
of 0(overwrite to 0 by bfin_sir_startup()), as done elsewhere in this
function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_mdiobus_register creates a phy_device even if get_phy_device failed
to create it previously. This causes indefinite polling on non-existent
PHYs. This fix makes of_mdio_register rely on get_phy_device to
properly create the device or fail otherwise.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver and firmware sync up through SYNC messages, and the
firmware's affirmative reply to these SYNC messages appears to be the
"Reset" indication received via the status interrupt endpoint.  Thus the
driver needs the status interrupt endpoint always active so that the
Reset indication can be received even if the netdev is closed, which is
the case right after device insertion.

If the Reset indication is not received by the driver, it continues
sending SYNC messages to the firmware, which crashes about 10 seconds
later and the device stops responding.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some drivers (sierra_net) need the status interrupt URB
active even when the device is closed, because they receive
custom indications from firmware.  Add functions to refcount
the status interrupt URB submit/kill operation so that
sub-drivers and the generic driver don't fight over whether
the status interrupt URB is active or not.

A sub-driver can call usbnet_status_start() at any time, but
the URB is only submitted the first time the function is
called.  Likewise, when the sub-driver is done with the URB,
it calls usbnet_status_stop() but the URB is only killed when
all users have stopped it.  The URB is still killed and
re-submitted for suspend/resume, as before, with the same
refcount it had at suspend.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Acked-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A rebranded Novatel E371 for AT&T's LTE bands.  qmi_wwan should drive this
device, while cdc_ether should ignore it.  Even though the USB descriptors
are plain CDC-ETHER that USB interface is a QMI interface.

Cc: <stable@vger.kernel.org>
Signed-off-by: NDan Williams <dcbw@redhat.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

be_close() followed by be_clear() is called as a part of cleanup in the
EEH/AER flow.  This patch stops TX in be_close() before cleaning/freeing
up the TX queues in be_clear(). This prevents be_xmit() from being called
while TX queues no longer exist.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While cleaning RX queues, the CQ DB may be rung several times (with rearm)
while waiting for the flush compl. Each CQ-notify with rearm can result in
an event. The EQ may get full resulting in a HW error.

Fix this by not re-arming the CQ while notifying a valid completion.
Also, there's no need to wait for 1ms after destroying RXQ, as the code in
be_rx_cq_clean() waits for the flush compl to arrive.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The buffer size for a FW cmd request must be big enough to fit the response,
else the cmd fails. For GET_MAC_LIST cmd, though the memory allocated for
the cmd is big enough to fit the response, the payload_len value in the
WRB hdr is being set to the request length only.
Fix this for GET_MAC_LIST cmd.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>