Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Allow for the creation of GEM objects backed by stolen memory. As these
are not backed by ordinary pages, we create a fake dma mapping and store
the address in the scatterlist rather than obj->pages.

v2: Mark _i915_gem_object_create_stolen() as static, as noticed by Jesse
Barnes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In order to accommodate objects that are not backed by struct pages, but
instead point into a contiguous region of stolen space, we need to make
various changes to avoid dereferencing obj->pages or obj->base.filp.

First introduce a marker for the stolen object, that specifies its
offset into the stolen region and implies that it has no backing pages.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As FBC is commonly disabled due to limitations of the chipset upon
output configurations, on many systems FBC is never enabled. For those
systems, it is advantageous to make use of the stolen memory for other
objects and so we defer allocation of the FBC chunk until we actually
require it. This increases the likelihood of that allocation failing,
but that in turns means that we are already taking advantage of the
stolen memory!

As well as delaying the allocation from driver initialisation until the
first use of FBC, we also return the stolen block after we finish using
it - allowing greater flexibility in our usage of stolen space. A side
effect of this is that we can then attempt to allocate only the required
amount of space (with a little slack to reduce reallocation rate and
avoid fragmentation).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As yet we do not do any preallocation (chicken-and-egg problem), but we
may like to preserve anything already allocated by the BIOS or grub and
reuse for own purposes after initialising the driver.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The routine to query the base of stolen memory was using the wrong
registers and the wrong encodings on virtually every platform.

It was not until the G33 refresh, that a PCI config register was
introduced that explicitly said where the stolen memory was. Prior to
865G there was not even a register that said where the end of usable
low memory was and where the stolen memory began (or ended depending
upon chipset). Before then, one has to look at the BIOS memory maps to
find the Top of Memory. Alas that is not exported by arch/x86 and so we
have to resort to disabling stolen memory on gen2 for the time being.

Then SandyBridge enlarged the PCI register to a full 32-bits and change
the encoding of the address, so even though we happened to be querying
the right register, we read the wrong bits and ended up using address 0
for our stolen data, i.e. notably FBC.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will be used i915 in forthcoming patches in order to measure the
largest contiguous chunk of memory available for enabling chipset
features.

v2: Try to make the macro marginally safer and more readable by not
depending upon the drm_mm_hole_node_end() being non-zero. Note that we
need to open code list_for_each() in order to update the hole_start,
hole_end variable on each iteration and keep the macro sane.

v3: Tidy up few BUG_ONs that fell foul of adding additional tests to
drm_mm_hole_node_start().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To be used later by i915 to preallocate exact blocks of space from the
range manager.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We only need to read/write the south interrupt register if the
corresponding bit is set in the north master interrupt register.
Noticed while reading our interrupt handling code.

Same optimization has already been applied on ivb in

commit 0e43406b
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed May 9 21:45:44 2012 +0100

    drm/i915: Simplify interrupt processing for IvyBridge

    We can take advantage that the PCH_IIR is a subordinate register to
    reduce one of the required IIR reads, and that we only need to clear
    interrupts handled to reduce the writes. And by simply tidying the code
    we can reduce the line count and hopefully make it more readable.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

spinlock_t should always be used.

  LD      drivers/gpu/drm/i915/built-in.o
  CHECK   drivers/gpu/drm/i915/i915_drv.c
  CC [M]  drivers/gpu/drm/i915/i915_drv.o
  CHECK   drivers/gpu/drm/i915/i915_dma.c
  CC [M]  drivers/gpu/drm/i915/i915_dma.o
  CHECK   drivers/gpu/drm/i915/i915_irq.c
  CC [M]  drivers/gpu/drm/i915/i915_irq.o
  CHECK   drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_debugfs.c:558:31: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:39: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:51: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:63: warning: dereference of noderef expression
  CC [M]  drivers/gpu/drm/i915/i915_debugfs.o
  CHECK   drivers/gpu/drm/i915/i915_suspend.c
  CC [M]  drivers/gpu/drm/i915/i915_suspend.o
  CHECK   drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem.c:3703:14: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/i915/i915_gem.c:3703:14:    expected unsigned int [unsigned] [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3703:14:    got restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3706:22: warning: invalid assignment: &=
drivers/gpu/drm/i915/i915_gem.c:3706:22:    left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3706:22:    right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3707:22: warning: invalid assignment: |=
drivers/gpu/drm/i915/i915_gem.c:3707:22:    left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3707:22:    right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3711:39: warning: incorrect type in argument 2 (different base types)
drivers/gpu/drm/i915/i915_gem.c:3711:39:    expected restricted gfp_t [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3711:39:    got unsigned int [unsigned] [usertype] mask
  CC [M]  drivers/gpu/drm/i915/i915_gem.o
  CHECK   drivers/gpu/drm/i915/i915_gem_context.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_context.o
  CHECK   drivers/gpu/drm/i915/i915_gem_debug.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_debug.o
  CHECK   drivers/gpu/drm/i915/i915_gem_evict.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_evict.o
  CHECK   drivers/gpu/drm/i915/i915_gem_execbuffer.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_execbuffer.o
  CHECK   drivers/gpu/drm/i915/i915_gem_gtt.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_gtt.o
  CHECK   drivers/gpu/drm/i915/i915_gem_stolen.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_stolen.o
  CHECK   drivers/gpu/drm/i915/i915_gem_tiling.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_tiling.o
  CHECK   drivers/gpu/drm/i915/i915_sysfs.c
  CC [M]  drivers/gpu/drm/i915/i915_sysfs.o
  CHECK   drivers/gpu/drm/i915/i915_trace_points.c
  CC [M]  drivers/gpu/drm/i915/i915_trace_points.o
  CHECK   drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_display.c:1736:9: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:1736:9:     int enum transcoder  versus
drivers/gpu/drm/i915/intel_display.c:1736:9:     int enum pipe
drivers/gpu/drm/i915/intel_display.c:3659:48: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:3659:48:     int enum pipe  versus
drivers/gpu/drm/i915/intel_display.c:3659:48:     int enum transcoder
  CC [M]  drivers/gpu/drm/i915/intel_display.o
  CHECK   drivers/gpu/drm/i915/intel_crt.c
  CC [M]  drivers/gpu/drm/i915/intel_crt.o
  CHECK   drivers/gpu/drm/i915/intel_lvds.c
  CC [M]  drivers/gpu/drm/i915/intel_lvds.o
  CHECK   drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_bios.c:706:60: warning: incorrect type in initializer (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:706:60:    expected struct vbt_header *vbt
drivers/gpu/drm/i915/intel_bios.c:706:60:    got void [noderef] <asn:2>*vbt
drivers/gpu/drm/i915/intel_bios.c:726:42: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:726:42:    expected void const *<noident>
drivers/gpu/drm/i915/intel_bios.c:726:42:    got unsigned char [noderef] [usertype] <asn:2>*
drivers/gpu/drm/i915/intel_bios.c:727:40: warning: cast removes address space of expression
drivers/gpu/drm/i915/intel_bios.c:738:24: warning: cast removes address space of expression
  CC [M]  drivers/gpu/drm/i915/intel_bios.o
  CHECK   drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_ddi.c:87:6: warning: symbol 'intel_prepare_ddi_buffers' was not declared. Should it be static?
drivers/gpu/drm/i915/intel_ddi.c:1036:34: warning: mixing different enum types
drivers/gpu/drm/i915/intel_ddi.c:1036:34:     int enum pipe  versus
drivers/gpu/drm/i915/intel_ddi.c:1036:34:     int enum transcoder
  CC [M]  drivers/gpu/drm/i915/intel_ddi.o
drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_ddi_setup_hw_pll_state’:
drivers/gpu/drm/i915/intel_ddi.c:1129:2: warning: ‘port’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_ddi.c:1111:12: note: ‘port’ was declared here
  CHECK   drivers/gpu/drm/i915/intel_dp.c
  CC [M]  drivers/gpu/drm/i915/intel_dp.o
  CHECK   drivers/gpu/drm/i915/intel_hdmi.c
  CC [M]  drivers/gpu/drm/i915/intel_hdmi.o
  CHECK   drivers/gpu/drm/i915/intel_sdvo.c
  CC [M]  drivers/gpu/drm/i915/intel_sdvo.o
  CHECK   drivers/gpu/drm/i915/intel_modes.c
  CC [M]  drivers/gpu/drm/i915/intel_modes.o
  CHECK   drivers/gpu/drm/i915/intel_panel.c
  CC [M]  drivers/gpu/drm/i915/intel_panel.o
  CHECK   drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/i915/intel_pm.c:2173:1: warning: symbol 'mchdev_lock' was not declared. Should it be static?
  CC [M]  drivers/gpu/drm/i915/intel_pm.o
  CHECK   drivers/gpu/drm/i915/intel_i2c.c
  CC [M]  drivers/gpu/drm/i915/intel_i2c.o
  CHECK   drivers/gpu/drm/i915/intel_fb.c
  CC [M]  drivers/gpu/drm/i915/intel_fb.o
  CHECK   drivers/gpu/drm/i915/intel_tv.c
  CC [M]  drivers/gpu/drm/i915/intel_tv.o
  CHECK   drivers/gpu/drm/i915/intel_dvo.c
  CC [M]  drivers/gpu/drm/i915/intel_dvo.o
  CHECK   drivers/gpu/drm/i915/intel_ringbuffer.c
  CC [M]  drivers/gpu/drm/i915/intel_ringbuffer.o
  CHECK   drivers/gpu/drm/i915/intel_overlay.c
  CC [M]  drivers/gpu/drm/i915/intel_overlay.o
  CHECK   drivers/gpu/drm/i915/intel_sprite.c
  CC [M]  drivers/gpu/drm/i915/intel_sprite.o
  CHECK   drivers/gpu/drm/i915/intel_opregion.c
  CC [M]  drivers/gpu/drm/i915/intel_opregion.o
  CHECK   drivers/gpu/drm/i915/dvo_ch7xxx.c
  CC [M]  drivers/gpu/drm/i915/dvo_ch7xxx.o
  CHECK   drivers/gpu/drm/i915/dvo_ch7017.c
  CC [M]  drivers/gpu/drm/i915/dvo_ch7017.o
  CHECK   drivers/gpu/drm/i915/dvo_ivch.c
  CC [M]  drivers/gpu/drm/i915/dvo_ivch.o
  CHECK   drivers/gpu/drm/i915/dvo_tfp410.c
  CC [M]  drivers/gpu/drm/i915/dvo_tfp410.o
  CHECK   drivers/gpu/drm/i915/dvo_sil164.c
  CC [M]  drivers/gpu/drm/i915/dvo_sil164.o
  CHECK   drivers/gpu/drm/i915/dvo_ns2501.c
  CC [M]  drivers/gpu/drm/i915/dvo_ns2501.o
  CHECK   drivers/gpu/drm/i915/i915_gem_dmabuf.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_dmabuf.o
  CHECK   drivers/gpu/drm/i915/i915_ioc32.c
  CC [M]  drivers/gpu/drm/i915/i915_ioc32.o
  CHECK   drivers/gpu/drm/i915/intel_acpi.c
  CC [M]  drivers/gpu/drm/i915/intel_acpi.o
  LD [M]  drivers/gpu/drm/i915/i915.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      drivers/gpu/drm/i915/i915.mod.o
  LD [M]  drivers/gpu/drm/i915/i915.ko

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reported-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NLuis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use drm_dp_bw_code_to_link_rate insead. It's the same thing, but
supports DP_LINK_BW_5_4 and is also used by the other drivers.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Do an early return in case we don't have DDI instead of having the
whole function inside an "if" statement.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And use it whenever we call code that uses the DDIs. We already have
intel_ddi.c and prefix every function with intel_ddi_something instead of
haswell_something, so I think replacing the checks with HAS_DDI makes more
sense. Just a cosmetical change, yes I know, but I have this OCD...
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This function is not called on Haswell anymore.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's not even declared on header files.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we drop dev->struct_mutex when going through the slowpath, the
object might have been moved out of the cpu domain. Hence we need to
clflush the entire object to ensure that after the ioctl returns,
everything is coherent again (interwoven writes are ill-defined
anyway).

But we only need to do this if we start in the cpu domain and the
object requires flushing for coherency. So don't do the flushing if
the object is coherent anyway or if we've done in-line clfushing
already.

v2: i915_gem_clflush_object already checks whether the object is
coherent and if so, drops the flushing. Hence we don't need to check
that ourselves, simplifying the condition.

v3: Reorder the checks for better clarity (and adjust the comment
accordingly), suggested by Chris Wilson.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The shmem paths for pwrite/pread used a clever trick to hold onto a
single page when dropping the big dev->struct_mutex for the slowpath.
But this ran the risk of reinstating (or not completely purging) the
backing storage when dropping purgeable objects.

Hence the code needed to keep track of whether it ever dropped the
lock, and if it did, manually check whether it needs to re-purge the
backing storage. But thanks to the pages pin count introduced in

commit a5570178
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Sep 4 21:02:54 2012 +0100

    drm/i915: Pin backing pages whilst exporting through a dmabuf vmap

which allowed us to pin the backing storage and remove that page
reference trick from shmem_pwrite/read in

commit f60d7f0c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Sep 4 21:02:56 2012 +0100

    drm/i915: Pin backing pages for pread

and

commit 755d2218
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Sep 4 21:02:55 2012 +0100

    drm/i915: Pin backing pages for pwrite

we can now abolish this check. The slowpath cleanup completely
disappears from pread, and for pwrite we're only left with the domain
fixup in case someone moved the object out of the cpu domain from
under us. A follow-on patch will optimize that a notch more.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Only two things needed adjustment:
- pipe select for PCH_CPT
- There's no dithering bit on ilk+ in the lvds ctl reg
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A few things needed to change:
- HAS_PCH_SPLIT since ilk+ is not yet converted to this.
- s/LVDS/intel_lvds->reg/ to prep for ilk conversion
- replace the clock.p2 == 7 check with a is_dual_link check
- s/adjusted_mode/intel_lvds->fixed_mode

v2: Rebase on top of Jani Nikula's panel rework. I'm wondering whether
we shouldn't add an attached_panel pointer to intel_encoder, to
replace the encoder private ->attached_connector pointers, since
that's essentially what we need.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To ditch at least some of the PCH_SPLIT ? PCH_LVDS : LVDS code ...

v2: Rebase on top of Jani Nikula's panel rework.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Yeah, all users (both the clock selection special cases and the lvds
pin pair stuff) are still in common code, but this will change.

v2: Rebase on top of Jani Nikula's panel rework.

v3: Incorporate review from Paulo Zanoni:
- s/__is_dual_link_lvds/compute_is_dual_link_lvds
- kill dev_priv->lvds_val
- drop spurious whitespace change

v4: Add a debug printk to display the dual-link status, as suggested
by Paulo Zanoni in review.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v3)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just a prep patch to make this a property of intel_lvds. Makes more
sense, removes clutter from intel_display.c and eventually I want to
move all the encoder special cases wrt clock handling to encoders
anyway.

v2: Add an intel_ prefixe to is_dual_link_lvds since it's non-static
now.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... with is_dual_link_lvds introduced in

commit b0354385
Author: Takashi Iwai <tiwai@suse.de>
Date:   Tue Mar 20 13:07:05 2012 +0100

    drm/i915: Check VBIOS value for determining LVDS dual channel mode, too

All these checks predate this commit and have simply been overlooked.
Since we don't support switching between single-link and dual-link
modes anyway, this different checks could at best only get in the way
of refactorings, and in the worst case cause inconsistencies.

v2: Update the comment, we now have a solid way to figure out whether
we need dual-link lvds or not (falling back to vbt values as a last
resort). We still don't know how to switch between dual-link and
single link so leave that part intact. I'm not sure though whether
switching between these two modes makes any sense - we always drive
the panel at its fixed mode (with a fixed bpc) anyway ...
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we have two encoder specific bits in the common mode_set
functions:
- lvds pin pair enabling
- dp m/n setting and computation

Now the lvds stuff needs to happen before the pll is enabled. Since
that is done in the crtc_mode_set functions, we need to add a new
callback to be able to move them to the encoder code (where they
belong). The dp m/n stuff is a giant mess anyway (since it also
confuses itself with the fdi link m/n handling), so that needs to be
handled separately.

I think that we can move the pll enabling down quite a bit, which
might allow us to eventually merge encoder->pre_enable with this new
pre_pll_enable callback. But for now this will allow us to clean
things up a bit.

Note that vlv doesn't support lvds, hence we don't need to change
anything in there.

v2: Fixup commit message, both suggested from Paulo Zanoni.
- dp m/n doesn't need to happen before pll enabling
- lvds doesn't exist on vlv, hence no changes required in the vlv pll
  function.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we do not have any domains occupying the high bits, there is no point
in always printing the leading 00.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As per Chris Wilson's suggestion make
i915_gem_execbuffer_wait_for_flips() go away.

This was used to stall the GPU ring while there are pending
page flips involving the relevant BO. Ie. while the BO is still
being scanned out by the display controller.

The recommended alternative is to use the page flip events to
wait for the page flips to fully complete before reusing the BO
of the old front buffer. Or use more buffers.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NKristian Høgsberg <krh@bitplanet.net>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: don't remove obj->pending_flips, still required due to
reorder patches.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow a chunk of unused register defines ended up in the middle of
the PLL defines. They go back to the original kms merging.

The only used #define is SR01, move it to the register name together
with the other legacy vga stuff.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915_gem_handle_seqno_wrap() will zero all sync_seqnos but as the
wrap can happen inside ring->sync_to(), pre wrap seqno was
carried over and overwrote the zeroed sync_seqno.

When wrap is handled, all outstanding requests will be retired and
objects moved to inactive queue, causing their last_read_seqno to be zero.
Use this to update the sync_seqno correctly.

RING_SYNC registers after wrap will contain pre wrap values which
are >= seqno. So injecting the semaphore wait into ring completes
immediately.

Original idea for using last_read_seqno from Chris Wilson.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Should be useful to know what the driver thought the other ring's seqno
was when it last used a semaphore.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace the wait for the ring to be clear with the more common wait for
the ring to be idle. The principle advantage is one less exported
intel_ring_wait function, and the removal of a hardcoded value.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we now always preallocate the seqno before writing to the ring, we
can trivially test if we have any pending activity on the ring by
inspecting the olr. This makes it then possible to flush operations that
are not normally associated with a request, like power-management.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Based on the work by Mika Kuoppala, we realised that we need to handle
seqno wraparound prior to committing our changes to the ring. The most
obvious point then is to grab the seqno inside intel_ring_begin(), and
then to reuse that seqno for all ring operations until the next request.
As intel_ring_begin() can fail, the callers must already be prepared to
handle such failure and so we can safely add further checks.

This patch looks like it should be split up into the interface
changes and the tweaks to move seqno wrapping from the execbuffer into
the core seqno increment. However, I found no easy way to break it into
incremental steps without introducing further broken behaviour.

v2: Mika found a silly mistake and a subtle error in the existing code;
inside i915_gem_retire_requests() we were resetting the sync_seqno of
the target ring based on the seqno from this ring - which are only
related by the order of their allocation, not retirement. Hence we were
applying the optimisation that the rings were synchronised too early,
fortunately the only real casualty there is the handling of seqno
wrapping.

v3: Do not forget to reset the sync_seqno upon module reinitialisation,
ala resume.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> [v2]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There seem to be indeed some awkwards machines around, mostly those
without OpRegion support, where the firmware changes the display hw
state behind our backs when closing the lid.

This force-restore logic has been originally introduced in

commit c1c7af60
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Sep 10 15:28:03 2009 -0700

    drm/i915: force mode set at lid open time

but after the modeset-rework we've disabled it in the vain hope that
it's no longer required:

commit 3b7a89fc
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Sep 17 22:27:21 2012 +0200

    drm/i915: fix OOPS in lid_notify

Alas, no.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54677
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434Tested-by: NKrzysztof Mazur <krzysiek@podlesie.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In commit 69c2fc89
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 20 12:41:03 2012 +0100

    drm/i915: Remove the per-ring write list

the explicit flush was removed from i915_ring_idle(). However, we
continued to wait upon the next seqno which now did not correspond to
any request (except for the unusual condition of a failure to queue a
request after execbuffer) and so would wait indefinitely.

This has an important side-effect that i915_gpu_idle() does not cause
the seqno to be incremented. This is vital if we are to be able to idle
the GPU to handle seqno wraparound, as in subsequent patches.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Dereference dev_priv only after we know it is valid.
Found with smatch.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some devices may respond very slowly and only flag that the reply is
pending within the first 15us response window. Be kind to such devices
and wait a further 15ms, before checking for the pending reply. This
moves the existing special case delay of 30ms down from the detection
routine into the common path and pretends to explain it...

v2: Simplify the loop constructs as suggested by Jani Nikula.

References: https://bugs.freedesktop.org/show_bug.cgi?id=36997Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We currently set "0" as the VIC value of the AVI InfoFrames. According
to the specs this should be fine and work for every mode, so to my
point of view we can't consider the current behavior as a bug. The
problem is that  we recently received a bug report (Kernel bug #50371)
from a user that has an AV receiver that gives a black screen for any
mode with VIC set to 0.

So in order to make at least some modes work for him, this patch sets
the correct VIC number when sending AVI InfoFrames.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50371Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This function returns the VIC of the mode. This value can be used when
creating AVI InfoFrames.

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50371Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>