There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no

Lots of drivers don't properly compile without this when CONFIG_FB=n.
It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when
it's disabled I think it makes sense to add it to drm_fb_helper.h.

Long term we probably need to rethink all the logic to unload firmware
framebuffer drivers, at least if we want to be able to move away from
CONFIG_FB and fbcon.

v2: Unfortunately just stubbing out remove_conflicting_framebuffers in
drm_fb_helper.h upset gcc about static vs. non-static declarations, so
a new wrapper it needs to be. Means more churn :(

Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: tomi.valkeinen@ti.com
Cc: dh.herrmann@gmail.com
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(),
making this the default state when nouveau is loaded. nouveau_drm_load()
therefore calls pm_runtime_allow(), but there's no pm_runtime_forbid()
in nouveau_drm_unload() to balance it. Add it so that we leave the
device in the same state that we found it.

This isn't a bug, it's just good housekeeping. When nouveau is first
loaded with runpm=1, then unloaded and loaded again with runpm=0,
pm_runtime_forbid() will be called from nouveau_pmops_runtime_idle() or
nouveau_pmops_runtime_suspend(), so the behaviour is correct. The nvidia
blob doesn't use runtime pm, but if it ever does, this commit avoids
that it has to clean up behind nouveau.

Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: NKarol Herbst <karolherbst@gmail.com>
Tested-by: NPeter Wu <peter@lekensteyn.nl>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/92cf96445088217a4d7d7081b90140f2d6f047da.1465392124.git.lukas@wunner.de

nouveau_drm_load() calls pm_runtime_put() if nouveau_runtime_pm != 0,
but nouveau_drm_unload() calls pm_runtime_get_sync() unconditionally.
We therefore leak a runtime pm ref whenever nouveau is loaded with
runpm=0 and then unloaded. The GPU will subsequently never runtime
suspend even if nouveau is loaded again with runpm=1.

Fix by taking the runtime pm ref under the same condition that it was
released on driver load.

Fixes: 5addcf0a ("nouveau: add runtime PM support (v0.9)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reported-by: NKarol Herbst <karolherbst@gmail.com>
Tested-by: NKarol Herbst <karolherbst@gmail.com>
Tested-by: NPeter Wu <peter@lekensteyn.nl>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1544b82007037601fbc510b1a50edc56c529e75f.1465392124.git.lukas@wunner.de

We already have a fallback in place to fill out the unique from
dev->unique, which is set to something reasonable in drm_dev_alloc.

Which means we only need to have a special set_busid for pci devices,
to be able to care the backwards compat code for drm 1.1 around, which
libdrm still needs.

While developing and testing this patch things blew up in really
interesting ways, and the code is rather confusing in naming things
between the kernel code, ioctl #defines and libdrm. For the next brave
dragon slayer, document all this madness properly in the userspace
interface section of gpu.tmpl.

v2: Make drm_dev_set_unique static and update kerneldoc.

v3: Entire rewrite, plus document what's going on for posterity in the
gpu docbook uapi section.

v4: Drop accidental amdgpu hunk (Emil).

v5: Drop accidental omapdrm vblank counter change (Emil).

v6: Rebase on top of the sphinx conversion.

Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu)
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

No dev->struct_mutex anywhere to be seen.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-9-git-send-email-daniel.vetter@ffwll.ch

So far we've got one condition when DRM drivers need to defer probing
on a dual GPU system and it's coded separately into each of the relevant
drivers. As suggested by Daniel Vetter, deduplicate that code in the
drivers and move it to a new vga_switcheroo helper. This yields better
encapsulation of concepts and lets us add further checks in a central
place. (The existing check pertains to pre-retina MacBook Pros and an
additional check is expected to be needed for retinas.)

One might be tempted to check deferred probing conditions in
vga_switcheroo_register_client(), but this is usually called fairly late
during driver load. The GPU is fully brought up and ready for switching
at that point. On boot the ->probe hook is potentially called dozens of
times until it finally succeeds, and each time we'd repeat bringup and
teardown of the GPU, lengthening boot time considerably and cluttering
logfiles. A separate helper is therefore needed which can be called
right at the beginning of the ->probe hook.

Note that amdgpu currently does not call this helper as the AMD GPUs
built into MacBook Pros are only supported by radeon so far.

v2: This helper could eventually be used by audio clients as well,
    so rephrase kerneldoc to refer to "client" instead of "GPU"
    and move the single existing check in an if block specific
    to PCI_CLASS_DISPLAY_VGA devices. Move documentation on
    that check from kerneldoc to a comment. (Daniel Vetter)

v3: Mandate in kerneldoc that registration of client shall only
    happen after calling this helper. (Daniel Vetter)

v4: Rebase on 412c8f7d ("drm/radeon: Return -EPROBE_DEFER when
    amdkfd not loaded")

v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are
    matched as well. (Emil Velikov)

v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be
    considered a functional change. Move to a separate commit to
    keep this a pure refactoring change. (Emil Velikov, Jani Nikula)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de

Fixes out-of-tree build issue where uapi/drm/nouveau_drm.h gets picked
up instead.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows us to ditch a ton of ugly #ifdefs from a bunch of drm modeset
drivers.

v2: Make the dummy function actually return a sane value, spotted by
Ville.

v3: Because the patch is still in limbo there's no more drivers to
convert, noticed by Emil.

v4: Rebase once more, because hooray. I'll just go ahead an apply this
one later on to drm-misc.

Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This class supports a WFI method (0x0078) that's not present on the
KeplerChannelGpfifoA class.

The binary driver exposes both classes on these GPUs for some reason,
though there doesn't appear to be any difference in the setup that's
done for each (ie. even if you allocate GpfifoA, the WFI method will
still work).

We shall just expose GpfifoB, as I don't see a good reason to report
the presence of both.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On non-PCI devices, nobody should really care if the device does not
provide HDMI...
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d9542ca5041178165d3ff286c90cc99634f7d2ce.1452525860.git.lukas@wunner.de

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We will need our own debugfs_init and cleanup functions, because
nouveau_drm isn't ready while the DRM ones are called by DRM.
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The following code pattern exists in some DRM drivers:

    ddev = drm_dev_alloc(&driver, parent_dev);
    drm_dev_set_unique(ddev, dev_name(parent_dev));

(Sometimes dev_name(ddev->dev) is used, which is the same.)

As suggested in
http://lists.freedesktop.org/archives/dri-devel/2015-December/096441.html,
the unique name of a new DRM device can be set as dev_name(parent_dev)
when parent_dev is not NULL (vgem is a special case).
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_dev_set_unique() uses a format string to define the unique name of a
device.  This feature is not used as currently all the calls to this
function either use "%s" as a format string or directly use
dev_name().

Even though this second kind of call does not introduce security
problems, because there cannot be "%" characters in dev_name() results,
gcc issues a warning when building with -Wformat-security flag
("warning: format string is not a string literal (potentially
insecure)").  This warning is useful to find real bugs like the one
fixed by commit 3958b792 ("configfs: fix kernel infoleak through
user-controlled format string").  False positives which do not bring
an extra value make the work of finding real bugs harder.

Therefore remove the format-string feature from drm_dev_set_unique().
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1449829228-4425-1-git-send-email-nicolas.iooss_linux@m4x.orgSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Current Tegra code taking advantage of the IOMMU assumes a hardcoded
value for the IOMMU bit. Make it a platform property instead for
flexibility.

v2 (Ben Skeggs): remove nvkm dependence on drm structures
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

No longer required in a lot of cases, as objects are identified over NVIF
via an alternate mechanism since the rework.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Just one special case (since i915 lost its ums code, yay):
- radeon: Has slots for the old ums ioctls which don't have
  DRM_UNLOCKED, but all filled with drm_invalid_op. So ok to drop it
  everywhere.

Every other kms driver just has DRM_UNLOCKED for all their ioctls, as
they should.

v2: admgpu happened, include that one too. And i915 lost its UMS
support which means we can change all the i915 ioctls too.

v3: Rebased on top of new vmwgfx DX interface extensions.

v4: Rebase on top of render-node support in exynos.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_vblank_count() returns the software counter. We should not pretend
it's the hw counter since we use the hw counter to figuere out what the
software counter value should be. So instead provide a new function
drm_vblank_no_hw_counter() for drivers that don't have a real hw
counter. The new function simply returns 0, which is about the only
thing it can do.

Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVincent Abriou <vincent.abriou@st.com>
[danvet: s/int pipe/unsigned int pipe/ to follow Thierry's interface
change.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This commit reinstates the pre-DEVINIT AGP fiddling that was broken in
an earlier commit.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

An upcoming commit requires being able to modify the PRAMIN BAR page
tables while already holding the MMU subdev mutex.

To solve this issue, each VM has been given its own mutex.  As a nice
side-effect, this also allows separate VMs to be updated concurrently.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

A variety of tweaks to the NVIF library interfaces, mostly ripping out
things that turned out to be not so useful.

- Removed refcounting from nvif_object, callers are expected to not be
  stupid instead.
- nvif_client is directly reachable from anything derived from nvif_object,
  removing the need for heuristics to locate it
- _new() versions of interfaces, that allocate memory for the object
  they construct, have been removed.  The vast majority of callers used
  the embedded _init() interfaces.
- No longer storing constructor arguments (and the data returned from
  nvkm) inside nvif_object, it's more or less unused and just wastes
  memory.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Replaces the piece-by-piece (in response to NV_DEVICE ctor args) device
contruction with a once-off all-or-nothing approach, eliminating some
tricky refcounting issues.  The partial device init capability was only
required by some tools, and has been moved to probe time instead.

Temporarily removes a workaround for some boards where we need to fiddle
with AGP registers before executing the DEVINIT scripts.  A later commit
in this series reinstates it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>