Firmware is unable to retain the port counters during any kind of
fatal or non-fatal resets, so we must clear the port counters to
avoid false detection of port counter overflow.

Fixes: fea6b333 ("bnxt_en: Accumulate all counters.")
Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The module eeprom address range returned by bnxt_get_module_eeprom()
should be 256 bytes of A0h address space, the lower half of the A2h
address space, and page 0 for the upper half of the A2h address space.

Fix the firmware call by passing page_number 0 for the A2h slave address
space.

Fixes: 42ee18fe ("bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO")
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Transactions sit on one of several lists, depending on their state
(allocated, pending, complete, or polled).  A spinlock protects
against concurrent access when transactions are moved between these
lists.

Transactions are also reference counted.  A newly-allocated
transaction has an initial count of 1; a transaction is released in
gsi_trans_free() only if its decremented reference count reaches 0.
Releasing a transaction includes removing it from the polled (or if
unused, allocated) list, so the spinlock is acquired when we release
a transaction.

The reference count is used to allow a caller to synchronously wait
for a committed transaction to complete.  In this case, the waiter
takes an extra reference to the transaction *before* committing it
(so it won't be freed), and releases its reference (calls
gsi_trans_free()) when it is done with it.

Similarly, gsi_channel_update() takes an extra reference to ensure a
transaction isn't released before the function is done operating on
it.  Until the transaction is moved to the completed list (by this
function) it won't be freed, so this reference is taken "safely."

But in the quiesce path, we want to wait for the "last" transaction,
which we find in the completed or polled list.  Transactions on
these lists can be freed at any time, so we (try to) prevent that
by taking the reference while holding the spinlock.

Currently gsi_trans_free() decrements a transaction's reference
count unconditionally, acquiring the lock to remove the transaction
from its list *only* when the count reaches 0.  This does not
protect the quiesce path, which depends on the lock to ensure its
extra reference prevents release of the transaction.

Fix this by only dropping the last reference to a transaction
in gsi_trans_free() while holding the spinlock.

Fixes: 9dd441e4 ("soc: qcom: ipa: GSI transactions")
Reported-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NAlex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201114182017.28270-1-elder@linaro.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

During rmnet unregistration, the real device rx_handler is first cleared
followed by the removal of rx_handler_data after the rcu synchronization.

Any packets in the receive path may observe that the rx_handler is NULL.
However, there is no check when dereferencing this value to use the
rmnet_port information.

This fixes following splat by adding the NULL check.

Unable to handle kernel NULL pointer dereference at virtual
address 000000000000000d
pc : rmnet_rx_handler+0x124/0x284
lr : rmnet_rx_handler+0x124/0x284
 rmnet_rx_handler+0x124/0x284
 __netif_receive_skb_core+0x758/0xd74
 __netif_receive_skb+0x50/0x17c
 process_backlog+0x15c/0x1b8
 napi_poll+0x88/0x284
 net_rx_action+0xbc/0x23c
 __do_softirq+0x20c/0x48c

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: NSean Tranchetti <stranche@codeaurora.org>
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Link: https://lore.kernel.org/r/1605298325-3705-1-git-send-email-subashab@codeaurora.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Recycle the page running page_pool_put_full_page() in
mvneta_swbm_add_rx_fragment routine when the last descriptor
contains just the FCS or if the received packet contains more than
MAX_SKB_FRAGS fragments

Fixes: ca0e0146 ("net: mvneta: move skb build after descriptors processing")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/df6a2bad70323ee58d3901491ada31c1ca2a40b9.1605291228.git.lorenzo@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix an issue where dump stack is printed on suspend resume flow due to
netif_set_real_num_rx_queues() is not called with rtnl_lock held().

Fixes: 686cff3d ("net: stmmac: Fix incorrect location to set real_num_rx|tx_queues")
Reported-by: NChristophe ROULLIER <christophe.roullier@st.com>
Tested-by: NChristophe ROULLIER <christophe.roullier@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20201115074210.23605-1-vee.khee.wong@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 83a8471b ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605250173-18438-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 9efc9b2b ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605249243-17262-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 3ced0a88 ("qlcnic: Add support to run firmware POST")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605248186-16013-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: ca139d76 ("cx82310_eth: re-enable ethernet mode after router reboot")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605247627-15385-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

A user reports (slightly shortened from the original message):
  libphy: lantiq,xrx200-mdio: probed
  mdio_bus 1e108000.switch-mii: MDIO device at address 17 is missing.
  gswip 1e108000.switch lan: no phy at 2
  gswip 1e108000.switch lan: failed to connect to port 2: -19
  lantiq,xrx200-net 1e10b308.eth eth0: error -19 setting up slave phy

This is a single-port board using the internal Fast Ethernet PHY. The
user reports that switching to PHY scanning instead of configuring the
PHY within device-tree works around this issue.

The documentation for the standalone variant of the PHY11G (which is
probably very similar to what is used inside the xRX200 SoCs but having
the firmware burnt onto that standalone chip in the factory) states that
the PHY needs 300ms to be ready for MDIO communication after releasing
the reset.

Add a 300ms delay after initializing all GPHYs to ensure that the GPHY
firmware had enough time to initialize and to appear on the MDIO bus.
Unfortunately there is no (known) documentation on what the minimum time
to wait after releasing the reset on an internal PHY so play safe and
take the one for the external variant. Only wait after the last GPHY
firmware is loaded to not slow down the initialization too much (
xRX200 has two GPHYs but newer SoCs have at least three GPHYs).

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201115165757.552641-1-martin.blumenstingl@googlemail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

pm_runtime_get_sync() will increment pm usage at first and it will
resume the device later. If runtime of the device has error or
device is in inaccessible state(or other error state), resume
operation will fail. If we do not call put operation to decrease
the reference, it will result in reference count leak. Moreover,
this device cannot enter the idle state and always stay busy or other
non-idle state later. So we fixed it by replacing it with
pm_runtime_resume_and_get.

Fixes: 8fff755e ("net: fec: Ensure clocks are enabled while using mdio bus")
Signed-off-by: NZhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

There might be some requests pending in the buffer when the interface close
sequence occurs. In some devices, these pending requests might lead to the
module not shutting down properly when m_can_clk_stop() is called.

Therefore, move the device to init state before potentially powering it down.

Fixes: e0d1f481 ("can: m_can: add Bosch M_CAN controller support")
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NDan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200825055442.16994-1-faiz_abbas@ti.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Fix leaking netdev device from peripherial devices. The call to allocate the
netdev device is made from and managed by the peripherial.

Fixes: f524f829 ("can: m_can: Create a m_can platform framework")
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch creates a common function that peripherials can call to free the
netdev device when failures occur.

Fixes: f524f829 ("can: m_can: Create a m_can platform framework")
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

m_can_handle_state_change() is called with the new_state as an argument.

In the switch statements for CAN_STATE_ERROR_ACTIVE, the comment and the
following code indicate that a CAN_STATE_ERROR_WARNING is handled.

This patch fixes this problem by changing the case to CAN_STATE_ERROR_WARNING.
Signed-off-by: NWu Bo <wubo.oduw@gmail.com>
Link: http://lore.kernel.org/r/20200129022330.21248-2-wubo.oduw@gmail.com
Cc: Dan Murphy <dmurphy@ti.com>
Fixes: e0d1f481 ("can: m_can: add Bosch M_CAN controller support")
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Change the order in tcan4x5x_can_remove() to be the exact inverse of
tcan4x5x_can_probe(). First m_can_class_unregister(), then power down the
device.

Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20201019154233.1262589-10-mkl@pengutronix.deSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch adds the missing error checking when initializing the regmap
interface fails.

Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20201019154233.1262589-7-mkl@pengutronix.deSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

regmap is a library function that gets selected by drivers that need it. No
driver modules should depend on it. Instead depends on SPI and select
REGMAP_SPI. Depending on REGMAP_SPI makes this driver only build if another
driver already selected REGMAP_SPI, as the symbol can't be selected through the
menu kernel configuration.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Link: http://lore.kernel.org/r/20200413141013.506613-1-enric.balletbo@collabora.comReviewed-by: NDan Murphy <dmurphy@ti.com>
Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

pm_runtime_get_sync() will increment pm usage at first and it will resume the
device later. If runtime of the device has error or device is in inaccessible
state(or other error state), resume operation will fail. If we do not call put
operation to decrease the reference, it will result in reference leak in the
two functions flexcan_get_berr_counter() and flexcan_open().

Moreover, this device cannot enter the idle state and always stay busy or other
non-idle state later. So we should fix it through adding
pm_runtime_put_noidle().

Fixes: ca109896 ("can: flexcan: implement can Runtime PM")
Signed-off-by: NZhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201108083000.2599705-1-zhangqilong3@huawei.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In the patch

    d9b081e3 ("can: flexcan: remove ack_grp and ack_bit handling from driver")

the unused ack_grp and ack_bit were removed from the driver. However in the
comment, the "req_bit" was accidentally removed, too.

This patch adds back the "req_bit" bit.

Fixes: d9b081e3 ("can: flexcan: remove ack_grp and ack_bit handling from driver")
Reported-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Link: http://lore.kernel.org/r/20201014114810.2911135-1-mkl@pengutronix.deSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit variable. In the case where
time_ref->adapter->ts_used_bits is 32 or more this can lead to an oveflow.
Avoid this by shifting using the BIT_ULL macro instead.

Fixes: bb478555 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201105112427.40688-1-colin.king@canonical.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The driver has to first fill the skb with data and then handle it to
can_put_echo_skb(). This patch moves the can_put_echo_skb() down, right before
sending the skb out via USB.

Fixes: 51f3baad ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>
Link: https://lore.kernel.org/r/20201111221204.1639007-1-mkl@pengutronix.deSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In the error handling, we should goto the probe_exit_candev
to free ndev to prevent memory leak.

Fixes: dabf54dd ("can: ti_hecc: Convert TI HECC driver to DT only driver")
Signed-off-by: NZhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201114111708.3465543-1-zhangqilong3@huawei.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

netif_rx() is meant to be called from interrupt contexts. can_restart() may be
called by can_restart_work(), which is called from a worqueue, so it may run in
process context. Use netif_rx_ni() instead.

Fixes: 39549eef ("can: CAN Network device driver and Netlink interface")
Co-developed-by: NLoris Fauster <loris.fauster@ttcontrol.com>
Signed-off-by: NLoris Fauster <loris.fauster@ttcontrol.com>
Signed-off-by: NAlejandro Concepcion Rodriguez <alejandro@acoro.eu>
Link: https://lore.kernel.org/r/4e84162b-fb31-3a73-fa9a-9438b4bd5234@acoro.eu
[mkl: use netif_rx_ni() instead of netif_rx_any_context()]
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

If the phy enables power saving technology, the dwmac's software reset
needs more time to complete, enlarge dma reset timeout to 200000us.
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201113090902.5c7aab1a@xhacker.debianSigned-off-by: NJakub Kicinski <kuba@kernel.org>

On arm imx6, when opening the chip's netdev, the whole Linux
kernel intermittently hangs/freezes.

This is caused by a bug in the driver code which tests if pcie
interrupts are working correctly, using the software interrupt:

1. open: enable the software interrupt
2. open: tell the chip to assert the software interrupt
3. open: wait for flag
4. ISR: acknowledge s/w interrupt, set flag
5. open: notice flag, disable the s/w interrupt, continue

Unfortunately the ISR only acknowledges the s/w interrupt, but
does not disable it. This will re-trigger the ISR in a tight
loop.

On some (lucky) platforms, open proceeds to disable the s/w
interrupt even while the ISR is 'spinning'. On arm imx6,
the spinning ISR does not allow open to proceed, resulting
in a hung Linux kernel.

Fix minimally by disabling the s/w interrupt in the ISR, which
will prevent it from spinning. This won't break anything because
the s/w interrupt is used as a one-shot interrupt.

Note that this is a minimal fix, overlooking many possible
cleanups, e.g.:
- lan743x_intr_software_isr() is completely redundant and reads
  INT_STS twice for no apparent reason
- disabling the s/w interrupt in lan743x_intr_test_isr() is now
  redundant, but harmless
- waiting on software_isr_flag can be converted from a sleeping
  poll loop to wait_event_timeout()

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # arm imx6 lan7430
Signed-off-by: NSven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112204741.12375-1-TheSven73@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When running this chip on arm imx6, we intermittently observe
the following kernel warning in the log, especially when the
system is under high load:

[   50.119484] ------------[ cut here ]------------
[   50.124377] WARNING: CPU: 0 PID: 303 at kernel/softirq.c:169 __local_bh_enable_ip+0x100/0x184
[   50.132925] IRQs not enabled as expected
[   50.159250] CPU: 0 PID: 303 Comm: rngd Not tainted 5.7.8 #1
[   50.164837] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[   50.171395] [<c0111a38>] (unwind_backtrace) from [<c010be28>] (show_stack+0x10/0x14)
[   50.179162] [<c010be28>] (show_stack) from [<c05b9dec>] (dump_stack+0xac/0xd8)
[   50.186408] [<c05b9dec>] (dump_stack) from [<c0122e40>] (__warn+0xd0/0x10c)
[   50.193391] [<c0122e40>] (__warn) from [<c0123238>] (warn_slowpath_fmt+0x98/0xc4)
[   50.200892] [<c0123238>] (warn_slowpath_fmt) from [<c012b010>] (__local_bh_enable_ip+0x100/0x184)
[   50.209860] [<c012b010>] (__local_bh_enable_ip) from [<bf09ecbc>] (destroy_conntrack+0x48/0xd8 [nf_conntrack])
[   50.220038] [<bf09ecbc>] (destroy_conntrack [nf_conntrack]) from [<c0ac9b58>] (nf_conntrack_destroy+0x94/0x168)
[   50.230160] [<c0ac9b58>] (nf_conntrack_destroy) from [<c0a4aaa0>] (skb_release_head_state+0xa0/0xd0)
[   50.239314] [<c0a4aaa0>] (skb_release_head_state) from [<c0a4aadc>] (skb_release_all+0xc/0x24)
[   50.247946] [<c0a4aadc>] (skb_release_all) from [<c0a4b4cc>] (consume_skb+0x74/0x17c)
[   50.255796] [<c0a4b4cc>] (consume_skb) from [<c081a2dc>] (lan743x_tx_release_desc+0x120/0x124)
[   50.264428] [<c081a2dc>] (lan743x_tx_release_desc) from [<c081a98c>] (lan743x_tx_napi_poll+0x5c/0x18c)
[   50.273755] [<c081a98c>] (lan743x_tx_napi_poll) from [<c0a6b050>] (net_rx_action+0x118/0x4a4)
[   50.282306] [<c0a6b050>] (net_rx_action) from [<c0101364>] (__do_softirq+0x13c/0x53c)
[   50.290157] [<c0101364>] (__do_softirq) from [<c012b29c>] (irq_exit+0x150/0x17c)
[   50.297575] [<c012b29c>] (irq_exit) from [<c0196a08>] (__handle_domain_irq+0x60/0xb0)
[   50.305423] [<c0196a08>] (__handle_domain_irq) from [<c05d44fc>] (gic_handle_irq+0x4c/0x90)
[   50.313790] [<c05d44fc>] (gic_handle_irq) from [<c0100ed4>] (__irq_usr+0x54/0x80)
[   50.321287] Exception stack(0xecd99fb0 to 0xecd99ff8)
[   50.326355] 9fa0:                                     1cf1aa74 00000001 00000001 00000000
[   50.334547] 9fc0: 00000001 00000000 00000000 00000000 00000000 00000000 00004097 b6d17d14
[   50.342738] 9fe0: 00000001 b6d17c60 00000000 b6e71f94 800b0010 ffffffff
[   50.349364] irq event stamp: 2525027
[   50.352955] hardirqs last  enabled at (2525026): [<c0a6afec>] net_rx_action+0xb4/0x4a4
[   50.360892] hardirqs last disabled at (2525027): [<c0d6d2fc>] _raw_spin_lock_irqsave+0x1c/0x50
[   50.369517] softirqs last  enabled at (2524660): [<c01015b4>] __do_softirq+0x38c/0x53c
[   50.377446] softirqs last disabled at (2524693): [<c012b29c>] irq_exit+0x150/0x17c
[   50.385027] ---[ end trace c0b571db4bc8087d ]---

The driver is calling dev_kfree_skb() from code inside a spinlock,
where h/w interrupts are disabled. This is forbidden, as documented
in include/linux/netdevice.h. The correct function to use
dev_kfree_skb_irq(), or dev_kfree_skb_any().

Fix by using the correct dev_kfree_skb_xxx() functions:

in lan743x_tx_release_desc():
  called by lan743x_tx_release_completed_descriptors()
    called by in lan743x_tx_napi_poll()
    which holds a spinlock
  called by lan743x_tx_release_all_descriptors()
    called by lan743x_tx_close()
    which can-sleep
conclusion: use dev_kfree_skb_any()

in lan743x_tx_xmit_frame():
  which holds a spinlock
conclusion: use dev_kfree_skb_irq()

in lan743x_tx_close():
  which can-sleep
conclusion: use dev_kfree_skb()

in lan743x_rx_release_ring_element():
  called by lan743x_rx_close()
    which can-sleep
  called by lan743x_rx_open()
    which can-sleep
conclusion: use dev_kfree_skb()

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: NSven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112185949.11315-1-TheSven73@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

As soon as you add the second port to a VLAN, all other port
membership configuration is overwritten with zeroes. The HW interprets
this as all ports being "unmodified members" of the VLAN.

In the simple case when all ports belong to the same VLAN, switching
will still work. But using multiple VLANs or trying to set multiple
ports as tagged members will not work.

On the 6352, doing a VTU GetNext op, followed by an STU GetNext op
will leave you with both the member- and state- data in the VTU/STU
data registers. But on the 6097 (which uses the same implementation),
the STU GetNext will override the information gathered from the VTU
GetNext.

Separate the two stages, parsing the result of the VTU GetNext before
doing the STU GetNext.

We opt to update the existing implementation for all applicable chips,
as opposed to creating a separate callback for 6097, because although
the previous implementation did work for (at least) 6352, the
datasheet does not mention the masking behavior.

Fixes: ef6fcea3 ("net: dsa: mv88e6xxx: get STU entry on VTU GetNext")
Signed-off-by: NTobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20201112114335.27371-1-tobias@waldekranz.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add the missing clk_disable_unprepare() before return from
smsc_phy_probe() in the error handling case.

Fixes: bedd8d78 ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605180239-1792-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Currently, we may set the tunnel option flag when the size of metadata
is zero.  For example, we set TUNNEL_GENEVE_OPT in the receive function
no matter the geneve option is present or not.  As this may result in
issues on the tunnel flags consumers, this patch fixes the issue.

Related discussion:
* https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u

Fixes: 256c87c1 ("net: check tunnel option type in tunnel flags")
Signed-off-by: NYi-Hung Wei <yihung.wei@gmail.com>
Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

We always have to update the value of ret, otherwise the
 error value may be the previous one.

Fixes: f6bd5952 ("net: ethernet: ti: introduce am654 common platform time sync driver")
Signed-off-by: NWang Qing <wangqing@vivo.com>
[grygorii.strashko@ti.com: fix build warn, subj add fixes tag]
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201112164541.3223-1-grygorii.strashko@ti.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 4c2703df ("net: marvell: prestera: Add PCI interface support")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWang Hai <wanghai38@huawei.com>
Reviewed-by: NVadym Kochan <vadym.kochan@plvision.eu>
Acked-by: NVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20201113113236.71678-1-wanghai38@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Selecting VSC8575 as a MACSec PHY was not correct

The relevant datasheet can be found here:
  - VSC8575: https://www.microchip.com/wwwproducts/en/VSC8575

History:
v1 -> v2:
   - Corrected the sha in the "Fixes:" tag

Fixes: 1bbe0ecc ("net: phy: mscc: macsec initialization")
Signed-off-by: NSteen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: NAntoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201113091116.1102450-1-steen.hegelund@microchip.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Depending on the SoC/platform the CPSW can completely lose context after a
suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of
WR_C0_MISC_EN register, so CPTS IRQ will became disabled.

Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is
actually started.

Fixes: 84ea9c0a ("net: ethernet: ti: cpsw: enable cpts irq")
Reported-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201112111546.20343-1-grygorii.strashko@ti.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/1605180879-2573-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The ndo_start_xmit() method must return NETDEV_TX_OK if the DMA mapping
fails, after freeing the socket buffer.
Fix the mtk_star_netdev_start_xmit() function accordingly.

Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: NVincent Stehlé <vincent.stehle@laposte.net>
Acked-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20201112084833.21842-1-vincent.stehle@laposte.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When no devicetree is present, the driver will use an
uninitialized variable.

Fix by initializing this variable.

Fixes: 902a66e0 ("lan743x: correctly handle chips with internal PHY")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NSven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

VRF devices use an optimized direct path on output if a default qdisc
is involved, calling Netfilter hooks directly. This path, however, does
not consider Netfilter rules completing asynchronously, such as with
NFQUEUE. The Netfilter okfn() is called for asynchronously accepted
packets, but the VRF never passes that packet down the stack to send
it out over the slave device. Using the slower redirect path for this
seems not feasible, as we do not know beforehand if a Netfilter hook
has asynchronously completing rules.

Fix the use of asynchronously completing Netfilter rules in OUTPUT and
POSTROUTING by using a special completion function that additionally
calls dst_output() to pass the packet down the stack. Also, slightly
adjust the use of nf_reset_ct() so that is called in the asynchronous
case, too.

Fixes: dcdd43c4 ("net: vrf: performance improvements for IPv4")
Fixes: a9ec54d1 ("net: vrf: performance improvements for IPv6")
Signed-off-by: NMartin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWang Hai <wanghai38@huawei.com>
Acked-by: NJan "Yenya" Kasprzak <kas@fi.muni.cz>
Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>