Merge tag 'hwmon-for-linus-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Guenter writes:
   "Various bug fixes for nct6775 driver"

James writes:
  "SCSI fixes on 20180919

   A couple of small but important fixes, one affecting big endian and
   the other fixing a BUG_ON in scatterlist processing.

   Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>"

Crypto stuff from Herbert:
  "This push fixes a potential boot hang in ccp and an incorrect
   CPU capability check in aegis/morus on x86."

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2
  crypto: ccp - add timeout support in the SEV command

Steven writes:
  "Vaibhav Nagarnaik found that modifying the ring buffer size could cause
   a huge latency in the system because it does a while loop to free pages
   without releasing the CPU (on non preempt kernels). In a case where there
   are hundreds of thousands of pages to free it could actually cause a system
   stall. A properly place cond_resched() solves this issue."

Darren writes:
  "platform-drivers-x86 for v4.19-2

   Free allocated ACPI buffers in two drivers.

   The following is an automated git shortlog grouped by driver:

   alienware-wmi:
    -  Correct a memory leak

   dell-smbios-wmi:
    -  Correct a memory leak"

* tag 'platform-drivers-x86-v4.19-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: alienware-wmi: Correct a memory leak
  platform/x86: dell-smbios-wmi: Correct a memory leak

Dave writes:
  "Various fixes, all over the place:

   1) OOB data generation fix in bluetooth, from Matias Karhumaa.

   2) BPF BTF boundary calculation fix, from Martin KaFai Lau.

   3) Don't bug on excessive frags, to be compatible in situations mixing
      older and newer kernels on each end.  From Juergen Gross.

   4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.

   5) Zero keying information in TLS layer before freeing copies
      of them, from Sabrina Dubroca.

   6) Fix NULL deref in act_sample, from Davide Caratti.

   7) Orphan SKB before GRO in veth to prevent crashes with XDP,
      from Toshiaki Makita.

   8) Fix use after free in ip6_xmit, from Eric Dumazet.

   9) Fix VF mac address regression in bnxt_en, from Micahel Chan.

   10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.

   11) Programming adjustments to r8169 which fix not being to enter deep
       sleep states on some machines, from Kai-Heng Feng and Hans de
       Goede.

   12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
       Oskolkov."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
  net/ipv6: do not copy dst flags on rt init
  qmi_wwan: set DTR for modems in forced USB2 mode
  clk: x86: Stop marking clocks as CLK_IS_CRITICAL
  r8169: Get and enable optional ether_clk clock
  clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
  r8169: enable ASPM on RTL8106E
  r8169: Align ASPM/CLKREQ setting function with vendor driver
  Revert "kcm: remove any offset before parsing messages"
  kcm: remove any offset before parsing messages
  net: ethernet: Fix a unused function warning.
  net: dsa: mv88e6xxx: Fix ATU Miss Violation
  tls: fix currently broken MSG_PEEK behavior
  hv_netvsc: pair VF based on serial number
  PCI: hv: support reporting serial number as slot information
  bnxt_en: Fix VF mac address regression.
  ipv6: fix possible use-after-free in ip6_xmit()
  net: hp100: fix always-true check for link up state
  ARM: dts: at91: add new compatibility string for macb on sama5d3
  net: macb: disable scatter-gather for macb on sama5d3
  net: mvpp2: let phylink manage the carrier state
  ...

DST_NOCOUNT in dst_entry::flags tracks whether the entry counts
toward route cache size (net->ipv6.sysctl.ip6_rt_max_size).

If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented
in dist_init() and decremented in dst_destroy().

This flag is tied to allocation/deallocation of dst_entry and
should not be copied from another dst/route. Otherwise it can happen
that dst_ops::pcpuc_entries counter grows until no new routes can
be allocated because the counter reached ip6_rt_max_size due to
DST_NOCOUNT not set and thus no counter decrements on gc-ed routes.

Fixes: 3b6761d1 ("net/ipv6: Move dst flags to booleans in fib entries")
Cc: David Ahern <dsahern@gmail.com>
Acked-by: NWei Wang <weiwan@google.com>
Signed-off-by: NPeter Oskolkov <posk@google.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recent firmware revisions have added the ability to force
these modems to USB2 mode, hiding their SuperSpeed
capabilities from the host.  The driver has been using the
SuperSpeed capability, as shown by the bcdUSB field of the
device descriptor, to detect the need to enable the DTR
quirk.  This method fails when the modems are forced to
USB2 mode by the modem firmware.

Fix by unconditionally enabling the DTR quirk for the
affected device IDs.
Reported-by: NFred Veldini <fred.veldini@gmail.com>
Reported-by: NDeshu Wen <dwen@sierrawireless.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Reported-by: NFred Veldini <fred.veldini@gmail.com>
Reported-by: NDeshu Wen <dwen@sierrawireless.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hans de Goede says:

====================
r8169 (x86) clk fixes to fix S0ix not being reached

This series adds code to the r8169 ethernet driver to get and enable an
external clock if present, avoiding the need for a hack in the
clk-pmc-atom driver where that clock was left on continuesly causing x86
some devices to not reach deep power saving states (S0ix) when suspended
causing to them to quickly drain their battery while suspended.

The 3 commits in this series need to be merged in order to avoid
regressions while bisecting. The clk-pmc-atom driver does not see much
changes (it was last touched over a year ago). So the clk maintainers
have agreed with merging all 3 patches through the net tree.
All 3 patches have Stephen Boyd's Acked-by for this purpose.

This v2 of the series only had some minor tweaks done to the commit
messages and is ready for merging through the net tree now.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.

The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.

This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: NJohannes Stezenbach <js@sig21.net>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some boards a platform clock is used as clock for the r8169 chip,
this commit adds support for getting and enabling this clock (assuming
it has an "ether_clk" alias set on it).

This is related to commit d31fd43c ("clk: x86: Do not gate clocks
enabled by the firmware") which is a previous attempt to fix this for some
x86 boards, but this causes all Cherry Trail SoC using boards to not reach
there lowest power states when suspending.

This commit (together with an atom-pmc-clk driver commit adding the alias)
fixes things properly by making the r8169 get the clock and enable it when
it needs it.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: NJohannes Stezenbach <js@sig21.net>
Acked-by: NStephen Boyd <sboyd@kernel.org>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the
firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on
all the time, resulting on the device not being able to reach S0i2 or S0i3
when suspended.

The reason for this commit is that on some Bay Trail / Cherry Trail devices
the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk"
alias, so that the relevant ethernet drivers can try to (optionally) use
this, without needing X86 specific code / hacks, thus fixing ethernet on
these devices without breaking S0i3 support.

This commit uses clkdev_hw_create() to create the alias, mirroring the code
for the already existing "mclk" alias for pmc_plt_clk_3.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: NJohannes Stezenbach <js@sig21.net>
Acked-by: NStephen Boyd <sboyd@kernel.org>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Intel SoC was prevented from entering lower idle state because
of RTL8106E's ASPM was not enabled.

So enable ASPM on RTL8106E (chip version 39).
Now the Intel SoC can enter lower idle state, power consumption and
temperature are much lower.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's a small delay after setting ASPM in vendor drivers, r8101 and
r8168.
In addition, those drivers enable ASPM before ClkReq, also change that
to align with vendor driver.

I haven't seen anything bad becasue of this, but I think it's better to
keep in sync with vendor driver.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 072222b4.

I just read that this causes regressions.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code assumes kcm users know they need to look for the
strparser offset within their bpf program, which is not documented
anywhere and examples laying around do not do.

The actual recv function does handle the offset well, so we can create a
temporary clone of the skb and pull that one up as required for parsing.

The pull itself has a cost if we are pulling beyond the head data,
measured to 2-3% latency in a noisy VM with a local client stressing
that path. The clone's impact seemed too small to measure.

This bug can be exhibited easily by implementing a "trivial" kcm parser
taking the first bytes as size, and on the client sending at least two
such packets in a single write().

Note that bpf sockmap has the same problem, both for parse and for recv,
so it would pulling twice or a real pull within the strparser logic if
anyone cares about that.
Signed-off-by: NDominique Martinet <asmadeus@codewreck.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.

After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.

Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com

Cc: stable@vger.kernel.org
Fixes: 83f40318 ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: NJason Behmer <jbehmer@google.com>
Signed-off-by: NVaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Mark writes:
  "spi: Fixes for v4.19

  As well as one driver fix there's a couple of fixes here which address
  issues with the use of IDRs for allocation of dynamic bus numbers,
  ensuring that dynamic bus numbers interact well with static bus numbers
  assigned via DT and otherwise."

* tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE
  spi: Fix double IDR allocation with DT aliases
  spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers

Fix the following compile warning:

drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function]
 static int lan743x_pm_suspend(struct device *dev)
drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function]
 static int lan743x_pm_resume(struct device *dev)
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a cut/paste error and a typo which results in ATU miss violations
not being reported.

Fixes: 0977644c ("net: dsa: mv88e6xxx: Decode ATU problem interrupt")
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In kTLS MSG_PEEK behavior is currently failing, strace example:

  [pid  2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
  [pid  2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
  [pid  2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2430] listen(4, 10)               = 0
  [pid  2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
  [pid  2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
  [pid  2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2430] close(4)                    = 0
  [pid  2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
  [pid  2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
  [pid  2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64

As can be seen from strace, there are two TLS records sent,
i) 'test_read_peek' and ii) '_mult_recs\0' where we end up
peeking 'test_read_peektest_read_peektest'. This is clearly
wrong, and what happens is that given peek cannot call into
tls_sw_advance_skb() to unpause strparser and proceed with
the next skb, we end up looping over the current one, copying
the 'test_read_peek' over and over into the user provided
buffer.

Here, we can only peek into the currently held skb (current,
full TLS record) as otherwise we would end up having to hold
all the original skb(s) (depending on the peek depth) in a
separate queue when unpausing strparser to process next
records, minimally intrusive is to return only up to the
current record's size (which likely was what c46234eb
("tls: RX path for ktls") originally intended as well). Thus,
after patch we properly peek the first record:

  [pid  2046] wait4(2075,  <unfinished ...>
  [pid  2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
  [pid  2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
  [pid  2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2075] listen(4, 10)               = 0
  [pid  2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
  [pid  2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
  [pid  2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2075] close(4)                    = 0
  [pid  2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
  [pid  2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
  [pid  2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14

Fixes: c46234eb ("tls: RX path for ktls")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
hv_netvsc: associate VF and PV device by serial number

The Hyper-V implementation of PCI controller has concept of 32 bit serial number
(not to be confused with PCI-E serial number).  This value is sent in the protocol
from the host to indicate SR-IOV VF device is attached to a synthetic NIC.

Using the serial number (instead of MAC address) to associate the two devices
avoids lots of potential problems when there are duplicate MAC addresses from
tunnels or layered devices.

The patch set is broken into two parts, one is for the PCI controller
and the other is for the netvsc device. Normally, these go through different
trees but sending them together here for better review. The PCI changes
were submitted previously, but the main review comment was "why do you
need this?". This is why.

v2 - slot name can be shorter.
     remove locking when creating pci_slots; see comment for explaination
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Matching network device based on MAC address is problematic
since a non VF network device can be creted with a duplicate MAC
address causing confusion and problems.  The VMBus API does provide
a serial number that is a better matching method.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.

When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.

There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.

This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent commit to always forward the VF MAC address to the PF for
approval may not work if the PF driver or the firmware is older.  This
will cause the VF driver to fail during probe:

  bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff
  bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF
  bnxt_en 0000:00:03.0: Unable to initialize mac address.
  bnxt_en: probe of 0000:00:03.0 failed with error -99

We fix it by treating the error as fatal only if the VF MAC address is
locally generated by the VF.

Fixes: 707e7e96 ("bnxt_en: Always forward VF MAC address to the PF.")
Reported-by: NSeth Forshee <seth.forshee@canonical.com>
Reported-by: NSiwei Liu <loseweigh@gmail.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the unlikely case ip6_xmit() has to call skb_realloc_headroom(),
we need to call skb_set_owner_w() before consuming original skb,
otherwise we risk a use-after-free.

Bring IPv6 in line with what we do in IPv4 to fix this.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value
that is always non-zero and hence the wait for the link to drop always
terminates prematurely.  Fix this by using a logical not operator instead
of a bitwise complement.  This issue has been in the driver since
pre-2.6.12-rc2.

Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create a new configuration for the sama5d3-macb new compatibility string.
This configuration disables scatter-gather because we experienced lock down
of the macb interface of this particular SoC under very high load.
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Net drivers using phylink shouldn't mess with the link carrier
themselves and should let phylink manage it. The mvpp2 driver wasn't
following this best practice as the mac_config() function made calls to
change the link carrier state. This led to wrongly reported carrier link
state which then triggered other issues. This patch fixes this
behaviour.

But the PPv2 driver relied on this misbehaviour in two cases: for fixed
links and when not using phylink (ACPI mode). The later was fixed by
adding an explicit call to link_up(), which when the ACPI mode will use
phylink should be removed.

The fixed link case was relying on the mac_config() function to set the
link up, as we found an issue in phylink_start() which assumes the
carrier is off. If not, the link_up() function is never called. To fix
this, a call to netif_carrier_off() is added just before phylink_start()
so that we do not introduce a regression in the driver.

Fixes: 4bb04326 ("net: mvpp2: phylink support")
Reported-by: NRussell King <linux@armlinux.org.uk>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pppoe_rcv() needs to look back at the Ethernet header in order to
lookup the PPPoE session. Therefore we need to ensure that the mac
header is big enough to contain an Ethernet header. Otherwise
eth_hdr(skb)->h_source might access invalid data.

==================================================================
BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline]
BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline]
BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
 __get_item drivers/net/ppp/pppoe.c:172 [inline]
 get_item drivers/net/ppp/pppoe.c:236 [inline]
 pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
 netif_receive_skb+0x230/0x240 net/core/dev.c:4725
 tun_rx_batched drivers/net/tun.c:1555 [inline]
 tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4447c9
RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9
RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004
RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda
R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2737 [inline]
 __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:984 [inline]
 alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
 tun_alloc_skb drivers/net/tun.c:1532 [inline]
 tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
==================================================================

Fixes: 224cf5ad ("ppp: Move the PPP drivers")
Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch mades TI_DAVINCI_CPDMA select GENERIC_ALLOCATOR.
without that, the following sparc64 build failure happen

drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc':
(.text+0x278): undefined reference to `gen_pool_avail'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit':
(.text+0x340): undefined reference to `gen_pool_alloc'
(.text+0x5c4): undefined reference to `gen_pool_free'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free':
davinci_cpdma.c:(.text+0x64c): undefined reference to `gen_pool_free'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.6':
davinci_cpdma.c:(.text+0x17ac): undefined reference to `gen_pool_size'
davinci_cpdma.c:(.text+0x17b8): undefined reference to `gen_pool_avail'
davinci_cpdma.c:(.text+0x1824): undefined reference to `gen_pool_size'
davinci_cpdma.c:(.text+0x1830): undefined reference to `gen_pool_avail'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create':
(.text+0x19f8): undefined reference to `devm_gen_pool_create'
(.text+0x1a90): undefined reference to `gen_pool_add_virt'
Makefile:1011: recipe for target 'vmlinux' failed
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The documented register to retrieve the fan RPM for fan7 is found
to be unreliable at least with NCT6796D revision 3. Let's use
register 0x4ce instead. This is undocumented for NCT6796D, but
documented for NCT6797D and NCT6798D and known to be working.
Reported-by: NRobert Kern <ulteq@web.de>
Cc: Robert Kern <ulteq@web.de>
Fixes: 81820059 ("hwmon: (nct6775) Add support for NCT6796D")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Ted writes:
	Various ext4 bug fixes; primarily making ext4 more robust against
	maliciously crafted file systems, and some DAX fixes.

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4, dax: set ext4_dax_aops for dax files
  ext4, dax: add ext4_bmap to ext4_dax_aops
  ext4: don't mark mmp buffer head dirty
  ext4: show test_dummy_encryption mount option in /proc/mounts
  ext4: close race between direct IO and ext4_break_layouts()
  ext4: fix online resizing for bigalloc file systems with a 1k block size
  ext4: fix online resize's handling of a too-small final block group
  ext4: recalucate superblock checksum after updating free blocks/inodes
  ext4: avoid arithemetic overflow that can trigger a BUG
  ext4: avoid divide by zero fault when deleting corrupted inline directories
  ext4: check to make sure the rename(2)'s destination is not freed
  ext4: add nonstring annotations to ext4.h

Merge tag 'linux-kselftest-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pulled kselftest fixes from Shuah:
 "This Kselftest fixes update for 4.9-rc5 consists of:

  -- fixes to build failures
  -- fixes to add missing config files to increase test coverage
  -- fixes to cgroup test and a new cgroup test for memory.oom.group"

Daniel Borkmann says:

====================
pull-request: bpf 2018-09-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix end boundary calculation in BTF for the type section, from Martin.

2) Fix and revert subtraction of pointers that was accidentally allowed
   for unprivileged programs, from Alexei.

3) Fix bpf_msg_pull_data() helper by using __GFP_COMP in order to avoid
   a warning in linearizing sg pages into a single one for large allocs,
   from Tushar.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GRO expects skbs not to be owned by sockets, but when XDP is enabled veth
passed skbs owned by sockets. It caused corrupted sk_wmem_alloc.

Paolo Abeni reported the following splat:

[  362.098904] refcount_t overflow at skb_set_owner_w+0x5e/0xa0 in iperf3[1644], uid/euid: 0/0
[  362.108239] WARNING: CPU: 0 PID: 1644 at kernel/panic.c:648 refcount_error_report+0xa0/0xa4
[  362.117547] Modules linked in: tcp_diag inet_diag veth intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore intel_rapl_perf ipmi_ssif iTCO_wdt sg ipmi_si iTCO_vendor_support ipmi_devintf mxm_wmi ipmi_msghandler pcspkr dcdbas mei_me wmi mei lpc_ich acpi_power_meter pcc_cpufreq xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ixgbe igb ttm ahci mdio libahci ptp crc32c_intel drm pps_core libata i2c_algo_bit dca dm_mirror dm_region_hash dm_log dm_mod
[  362.176622] CPU: 0 PID: 1644 Comm: iperf3 Not tainted 4.19.0-rc2.vanilla+ #2025
[  362.184777] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[  362.193124] RIP: 0010:refcount_error_report+0xa0/0xa4
[  362.198758] Code: 08 00 00 48 8b 95 80 00 00 00 49 8d 8c 24 80 0a 00 00 41 89 c1 44 89 2c 24 48 89 de 48 c7 c7 18 4d e7 9d 31 c0 e8 30 fa ff ff <0f> 0b eb 88 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc
[  362.219711] RSP: 0018:ffff9ee6ff603c20 EFLAGS: 00010282
[  362.225538] RAX: 0000000000000000 RBX: ffffffff9de83e10 RCX: 0000000000000000
[  362.233497] RDX: 0000000000000001 RSI: ffff9ee6ff6167d8 RDI: ffff9ee6ff6167d8
[  362.241457] RBP: ffff9ee6ff603d78 R08: 0000000000000490 R09: 0000000000000004
[  362.249416] R10: 0000000000000000 R11: ffff9ee6ff603990 R12: ffff9ee664b94500
[  362.257377] R13: 0000000000000000 R14: 0000000000000004 R15: ffffffff9de615f9
[  362.265337] FS:  00007f1d22d28740(0000) GS:ffff9ee6ff600000(0000) knlGS:0000000000000000
[  362.274363] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  362.280773] CR2: 00007f1d222f35d0 CR3: 0000001fddfec003 CR4: 00000000001606f0
[  362.288733] Call Trace:
[  362.291459]  <IRQ>
[  362.293702]  ex_handler_refcount+0x4e/0x80
[  362.298269]  fixup_exception+0x35/0x40
[  362.302451]  do_trap+0x109/0x150
[  362.306048]  do_error_trap+0xd5/0x130
[  362.315766]  invalid_op+0x14/0x20
[  362.319460] RIP: 0010:skb_set_owner_w+0x5e/0xa0
[  362.324512] Code: ef ff ff 74 49 48 c7 43 60 20 7b 4a 9d 8b 85 f4 01 00 00 85 c0 75 16 8b 83 e0 00 00 00 f0 01 85 44 01 00 00 0f 88 d8 23 16 00 <5b> 5d c3 80 8b 91 00 00 00 01 8b 85 f4 01 00 00 89 83 a4 00 00 00
[  362.345465] RSP: 0018:ffff9ee6ff603e20 EFLAGS: 00010a86
[  362.351291] RAX: 0000000000001100 RBX: ffff9ee65deec700 RCX: ffff9ee65e829244
[  362.359250] RDX: 0000000000000100 RSI: ffff9ee65e829100 RDI: ffff9ee65deec700
[  362.367210] RBP: ffff9ee65e829100 R08: 000000000002a380 R09: 0000000000000000
[  362.375169] R10: 0000000000000002 R11: fffff1a4bf77bb00 R12: ffffc0754661d000
[  362.383130] R13: ffff9ee65deec200 R14: ffff9ee65f597000 R15: 00000000000000aa
[  362.391092]  veth_xdp_rcv+0x4e4/0x890 [veth]
[  362.399357]  veth_poll+0x4d/0x17a [veth]
[  362.403731]  net_rx_action+0x2af/0x3f0
[  362.407912]  __do_softirq+0xdd/0x29e
[  362.411897]  do_softirq_own_stack+0x2a/0x40
[  362.416561]  </IRQ>
[  362.418899]  do_softirq+0x4b/0x70
[  362.422594]  __local_bh_enable_ip+0x50/0x60
[  362.427258]  ip_finish_output2+0x16a/0x390
[  362.431824]  ip_output+0x71/0xe0
[  362.440670]  __tcp_transmit_skb+0x583/0xab0
[  362.445333]  tcp_write_xmit+0x247/0xfb0
[  362.449609]  __tcp_push_pending_frames+0x2d/0xd0
[  362.454760]  tcp_sendmsg_locked+0x857/0xd30
[  362.459424]  tcp_sendmsg+0x27/0x40
[  362.463216]  sock_sendmsg+0x36/0x50
[  362.467104]  sock_write_iter+0x87/0x100
[  362.471382]  __vfs_write+0x112/0x1a0
[  362.475369]  vfs_write+0xad/0x1a0
[  362.479062]  ksys_write+0x52/0xc0
[  362.482759]  do_syscall_64+0x5b/0x180
[  362.486841]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  362.492473] RIP: 0033:0x7f1d22293238
[  362.496458] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 c5 54 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[  362.517409] RSP: 002b:00007ffebaef8008 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  362.525855] RAX: ffffffffffffffda RBX: 0000000000002800 RCX: 00007f1d22293238
[  362.533816] RDX: 0000000000002800 RSI: 00007f1d22d36000 RDI: 0000000000000005
[  362.541775] RBP: 00007f1d22d36000 R08: 00000002db777a30 R09: 0000562b70712b20
[  362.549734] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000005
[  362.557693] R13: 0000000000002800 R14: 00007ffebaef8060 R15: 0000562b70712260

In order to avoid this, orphan the skb before entering GRO.

Fixes: 948d4f21 ("veth: Add driver XDP")
Reported-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Tested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
udp: add missing check on edumx rx path

The early demux RX path for the UDP protocol is currently missing
some checks. Both ipv4 and ipv6 implementations lack checksum conversion
and the ipv6 implementation additionally lack the zero checksum
validation.

The first patch takes care of UDPv4 and the second one of UDPv6
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the UDPv6 early demux rx code path lacks some mandatory
checks, already implemented into the normal RX code path - namely
the checksum conversion and no_check6_rx check.

Similar to the previous commit, we move the common processing to
an UDPv6 specific helper and call it from both edemux code path
and normal code path. In respect to the UDPv4, we need to add an
explicit check for non zero csum according to no_check6_rx value.
Reported-by: NJianlin Shi <jishi@redhat.com>
Suggested-by: NXin Long <lucien.xin@gmail.com>
Fixes: c9f2c1ae ("udp6: fix socket leak on early demux")
Fixes: 2abb7cdc ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 2abb7cdc ("udp: Add support for doing checksum
unnecessary conversion") left out the early demux path for
connected sockets. As a result IP_CMSG_CHECKSUM gives wrong
values for such socket when GRO is not enabled/available.

This change addresses the issue by moving the csum conversion to a
common helper and using such helper in both the default and the
early demux rx path.

Fixes: 2abb7cdc ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>