This patch tries to release mutex bch_register_lock early, to give
chance to stop cache set and bcache device early.

This patch also expends time out of stopping all bcache device from
2 seconds to 10 seconds, because stopping writeback rate update worker
may delay for 5 seconds, 2 seconds is not enough.

After this patch applied, stopping bcache devices during system reboot
or shutdown is very hard to be observed any more.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add code comments to explain which call back function might be called
for the closure_queue(). This is an effort to make code to be more
understandable for readers.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add comments to explain why in register_bcache() blkdev_put() won't
be called in two location. Add comments to explain why blkdev_put()
must be called in register_cache() when cache_alloc() failed.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch adds return value to register_bdev(). Then if failure happens
inside register_bdev(), its caller register_bcache() may detect and
handle the failure more properly.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When failure happens inside bch_journal_replay(), calling
cache_set_err_on() and handling the failure in async way is not a good
idea. Because after bch_journal_replay() returns, registering code will
continue to execute following steps, and unregistering code triggered
by cache_set_err_on() is running in same time. First it is unnecessary
to handle failure and unregister cache set in an async way, second there
might be potential race condition to run register and unregister code
for same cache set.

So in this patch, if failure happens in bch_journal_replay(), we don't
call cache_set_err_on(), and just print out the same error message to
kernel message buffer, then return -EIO immediately caller. Then caller
can detect such failure and handle it in synchrnozied way.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Bcache has several routines to release resources in implicit way, they
are called when the associated kobj released. This patch adds code
comments to notice when and which release callback will be called,
- When dc->disk.kobj released:
  void bch_cached_dev_release(struct kobject *kobj)
- When d->kobj released:
  void bch_flash_dev_release(struct kobject *kobj)
- When c->kobj released:
  void bch_cache_set_release(struct kobject *kobj)
- When ca->kobj released
  void bch_cache_release(struct kobject *kobj)
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently run_cache_set() has no return value, if there is failure in
bch_journal_replay(), the caller of run_cache_set() has no idea about
such failure and just continue to execute following code after
run_cache_set().  The internal failure is triggered inside
bch_journal_replay() and being handled in async way. This behavior is
inefficient, while failure handling inside bch_journal_replay(), cache
register code is still running to start the cache set. Registering and
unregistering code running as same time may introduce some rare race
condition, and make the code to be more hard to be understood.

This patch adds return value to run_cache_set(), and returns -EIO if
bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
such failure and stop registering code flow immedidately inside
register_cache_set().

If journal replay fails, run_cache_set() can report error immediately
to register_cache_set(). This patch makes the failure handling for
bch_journal_replay() be in synchronized way, easier to understand and
debug, and avoid poetential race condition for register-and-unregister
in same time.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In journal_reclaim() ja->cur_idx of each cache will be update to
reclaim available journal buckets. Variable 'int n' is used to count how
many cache is successfully reclaimed, then n is set to c->journal.key
by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache()
loop will write the jset data onto each cache.

The problem is, if all jouranl buckets on each cache is full, the
following code in journal_reclaim(),

529 for_each_cache(ca, c, iter) {
530       struct journal_device *ja = &ca->journal;
531       unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets;
532
533       /* No space available on this device */
534       if (next == ja->discard_idx)
535               continue;
536
537       ja->cur_idx = next;
538       k->ptr[n++] = MAKE_PTR(0,
539                         bucket_to_sector(c, ca->sb.d[ja->cur_idx]),
540                         ca->sb.nr_this_dev);
541 }
542
543 bkey_init(k);
544 SET_KEY_PTRS(k, n);

If there is no available bucket to reclaim, the if() condition at line
534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS()
will set KEY_PTRS field of c->journal.key to 0.

Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in
journal_write_unlocked() the journal data is written in following loop,

649	for (i = 0; i < KEY_PTRS(k); i++) {
650-671		submit journal data to cache device
672	}

If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data
won't be written to cache device here. If system crahed or rebooted
before bkeys of the lost journal entries written into btree nodes, data
corruption will be reported during bcache reload after rebooting the
system.

Indeed there is only one cache in a cache set, there is no need to set
KEY_PTRS field in journal_reclaim() at all. But in order to keep the
for_each_cache() logic consistent for now, this patch fixes the above
problem by not setting 0 KEY_PTRS of journal key, if there is no bucket
available to reclaim.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

'int ret' is defined as a local variable inside macro read_bucket().
Since this macro is called multiple times, and following patches will
use a 'int ret' variable in bch_journal_read(), this patch moves
definition of 'int ret' from macro read_bucket() to range of function
bch_journal_read().
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is a race between cache device register and cache set unregister.
For an already registered cache device, register_bcache will call
bch_is_open to iterate through all cachesets and check every cache
there. The race occurs if cache_set_free executes at the same time and
clears the caches right before ca is dereferenced in bch_is_open_cache.
To close the race, let's make sure the clean up work is protected by
the bch_register_lock as well.

This issue can be reproduced as follows,
while true; do echo /dev/XXX> /sys/fs/bcache/register ; done&
while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done &

and results in the following oops,

[  +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998
[  +0.000457] #PF error: [normal kernel read fault]
[  +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0
[  +0.000388] Oops: 0000 [#1] SMP PTI
[  +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6
[  +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
[  +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache]
[  +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d
[  +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202
[  +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000
[  +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001
[  +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a
[  +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0
[  +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620
[  +0.000384] FS:  00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000
[  +0.000420] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0
[  +0.000837] Call Trace:
[  +0.000682]  ? _cond_resched+0x10/0x20
[  +0.000691]  ? __kmalloc+0x131/0x1b0
[  +0.000710]  kernfs_fop_write+0xfa/0x170
[  +0.000733]  __vfs_write+0x2e/0x190
[  +0.000688]  ? inode_security+0x10/0x30
[  +0.000698]  ? selinux_file_permission+0xd2/0x120
[  +0.000752]  ? security_file_permission+0x2b/0x100
[  +0.000753]  vfs_write+0xa8/0x1a0
[  +0.000676]  ksys_write+0x4d/0xb0
[  +0.000699]  do_syscall_64+0x3a/0xf0
[  +0.000692]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NLiang Chen <liangchen.linux@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are a few nits in this function.  They could in theory all
be separate patches, but that's probably taking small commits
too far.

1) I added a brief comment saying what it does.

2) I like to declare pointer parameters "const" where possible
   for documentation reasons.

3) It uses bitmap_weight(&rand, BITS_PER_LONG) to compute the Hamming
weight of a 32-bit random number (giving a random integer with
mean 16 and variance 8).  Passing by reference in a 64-bit variable
is silly; just use hweight32().

4) Its helper function fract_exp_two is unnecessarily tangled.
Gcc can optimize the multiply by (1 << x) to a shift, but it can
be written in a much more straightforward way at the cost of one
more bit of internal precision.  Some analysis reveals that this
bit is always available.

This shrinks the object code for fract_exp_two(x, 6) from 23 bytes:

0000000000000000 <foo1>:
   0:   89 f9                   mov    %edi,%ecx
   2:   c1 e9 06                shr    $0x6,%ecx
   5:   b8 01 00 00 00          mov    $0x1,%eax
   a:   d3 e0                   shl    %cl,%eax
   c:   83 e7 3f                and    $0x3f,%edi
   f:   d3 e7                   shl    %cl,%edi
  11:   c1 ef 06                shr    $0x6,%edi
  14:   01 f8                   add    %edi,%eax
  16:   c3                      retq

To 19:

0000000000000017 <foo2>:
  17:   89 f8                   mov    %edi,%eax
  19:   83 e0 3f                and    $0x3f,%eax
  1c:   83 c0 40                add    $0x40,%eax
  1f:   89 f9                   mov    %edi,%ecx
  21:   c1 e9 06                shr    $0x6,%ecx
  24:   d3 e0                   shl    %cl,%eax
  26:   c1 e8 06                shr    $0x6,%eax
  29:   c3                      retq

(Verified with 0 <= frac_bits <= 8, 0 <= x < 16<<frac_bits;
both versions produce the same output.)

5) And finally, the call to bch_get_congested() in check_should_bypass()
is separated from the use of the value by multiple tests which
could moot the need to compute it.  Move the computation down to
where it's needed.  This also saves a local register to hold the
computed value.
Signed-off-by: NGeorge Spelvin <lkml@sdf.org>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch uses kmemdup_nul to create a NUL-terminated string from
dc->sb.label. This is better than open coding it.

With this, we can move env[2] initialization into env[] array to make
code more elegant.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

clang has identified a code path in which it thinks a
variable may be unused:

drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                        fifo_pop(&ca->free_inc, bucket);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
            ^~
drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
                        allocator_wait(ca, bch_allocator_push(ca, bucket));
                                                                  ^~~~~~
drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
                if (cond)                                               \
                    ^~~~
drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
                        fifo_pop(&ca->free_inc, bucket);
                        ^
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^
drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
        ^
drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
                        long bucket;
                                   ^

This cannot happen in practice because we only enter the loop
if there is at least one element in the list.

Slightly rearranging the code makes this clearer to both the
reader and the compiler, which avoids the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To get the amount of unused buckets in sysfs_priority_stats, the code
count the buckets which GC_SECTORS_USED is zero. It's correct and should
not be overwritten by the count of buckets which prio is zero.
Signed-off-by: NGuoju Fang <fangguoju@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The bio from upper layer is considered completed when bio_complete()
returns. In most scenarios bio_complete() is called in search_free(),
but when read miss happens, the bio_compete() is called when backing
device reading completed, while the struct search is still in use until
cache inserting finished.

If someone stops the bcache device just then, the device may be closed
and released, but after cache inserting finished the struct search will
access a freed struct cached_dev.

This patch add the reference of bcache device before bio_complete() when
read miss happens, and put it after the search is not used.
Signed-off-by: NGuoju Fang <fangguoju@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The refcount has been increased for pages retrieved from non-bvec iov iter
via __bio_iov_iter_get_pages(), so don't need to do that again.

Otherwise, IO pages are leaked easily.

Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Fixes: 7321ecbf ("block: change how we get page references in bio_iov_iter_get_pages")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bio_add_page() and __bio_add_page() are capable of adding pages into
bio, and now we have at least two such usages alreay:

	- __bio_iov_bvec_add_pages()
	- nvmet_bdev_execute_rw().

So update comments on these two helpers.

The thing is a bit special for __bio_try_merge_page(), given the caller
needs to know if the new added page is same with the last added page,
then it isn't safe to pass multi-page in case that 'same_page' is true,
so adds warning on potential misuse, and updates comment on
__bio_try_merge_page().

Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull MD fixes from Song.

* 'md-next' of https://github.com/liu-song-6/linux:
  md/raid: raid5 preserve the writeback action after the parity check
  Revert "Don't jump to compute_result state from check_result state"
  md: return -ENODEV if rdev has no mddev assigned
  block: fix use-after-free on gendisk

If the low level driver has no timeout handler, the
/sys/block/<disk>/queue/io_timeout will not be displayed.
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NWeiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While we generally allow scatterlists to have offsets larger than page
size for an entry, and other subsystems like the crypto code make use of
that, the block layer isn't quite ready for that.  Flip the switch back
to avoid them for now, and revisit that decision early in a merge window
once the known offenders are fixed.

Fixes: 8a96a0e4 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call")
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

__GFP_HIGHMEM is disabled if dax is enabled on brd, however
dax support for brd has been removed since commit (7a862fbb
"brd: remove dax support"), so restore __GFP_HIGHMEM in
brd_insert_page().

Also remove the no longer applicable comments about DAX and highmem.

Cc: stable@vger.kernel.org
Fixes: 7a862fbb ("brd: remove dax support")
Signed-off-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

commit 2da78092 "block: Fix dev_t minor allocation lifetime"
specifically moved blk_free_devt(dev->devt) call to part_release()
to avoid reallocating device number before the device is fully
shutdown.

However, it can cause use-after-free on gendisk in get_gendisk().
We use md device as example to show the race scenes:

Process1		Worker			Process2
md_free
						blkdev_open
del_gendisk
  add delete_partition_work_fn() to wq
  						__blkdev_get
						get_gendisk
put_disk
  disk_release
    kfree(disk)
    						find part from ext_devt_idr
						get_disk_and_module(disk)
    					  	cause use after free

    			delete_partition_work_fn
			put_device(part)
    		  	part_release
		    	remove part from ext_devt_idr

Before <devt, hd_struct pointer> is removed from ext_devt_idr by
delete_partition_work_fn(), we can find the devt and then access
gendisk by hd_struct pointer. But, if we access the gendisk after
it have been freed, it can cause in use-after-freeon gendisk in
get_gendisk().

We fix this by adding a new helper blk_invalidate_devt() in
delete_partition() and del_gendisk(). It replaces hd_struct
pointer in idr with value 'NULL', and deletes the entry from
idr in part_release() as we do now.

Thanks to Jan Kara for providing the solution and more clear comments
for the code.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Suggested-by: NJan Kara <jack@suse.cz>
Signed-off-by: NYufen Yu <yuyufen@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a
comment, and is trivial. The other one is a conflict due to a later fix
in the bio multi-page work, and needs a bit more care.

* tag 'v5.1-rc6': (770 commits)
  Linux 5.1-rc6
  block: make sure that bvec length can't be overflow
  block: kill all_q_node in request_queue
  x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
  coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
  mm/kmemleak.c: fix unused-function warning
  init: initialize jump labels before command line option parsing
  kernel/watchdog_hld.c: hard lockup message should end with a newline
  kcov: improve CONFIG_ARCH_HAS_KCOV help text
  mm: fix inactive list balancing between NUMA nodes and cgroups
  mm/hotplug: treat CMA pages as unmovable
  proc: fixup proc-pid-vm test
  proc: fix map_files test on F29
  mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
  mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
  mm: swapoff: shmem_unuse() stop eviction without igrab()
  mm: swapoff: take notice of completion sooner
  mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
  mm: swapoff: shmem_find_swap_entries() filter out other types
  slab: store tagged freelist for off-slab slabmgmt
  ...
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NFS client bugfix from Trond Myklebust:
 "Fix a regression in which an RPC call can be tagged with an error
  despite the transmission being successful"

* tag 'nfs-for-5.1-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Ignore queue transmission errors on successful transmission

Pull SCSI fixes from James Bottomley:
 "Three minor fixes: two obvious ones in drivers and a fix to the SG_IO
  path to correctly return status on error"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: aic7xxx: fix EISA support
  Revert "scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO"
  scsi: core: set result when the command cannot be dispatched

Pull block fixes from Jens Axboe:
 "A set of small fixes that should go into this series. This contains:

   - Removal of unused queue member (Hou)

   - Overflow bvec fix (Ming)

   - Various little io_uring tweaks (me)
       - kthread parking
       - Only call cpu_possible() for verified CPU
       - Drop unused 'file' argument to io_file_put()
       - io_uring_enter vs io_uring_register deadlock fix
       - CQ overflow fix

   - BFQ internal depth update fix (me)"

* tag 'for-linus-20190420' of git://git.kernel.dk/linux-block:
  block: make sure that bvec length can't be overflow
  block: kill all_q_node in request_queue
  io_uring: fix CQ overflow condition
  io_uring: fix possible deadlock between io_uring_{enter,register}
  io_uring: drop io_file_put() 'file' argument
  bfq: update internal depth state when queue depth changes
  io_uring: only test SQPOLL cpu after we've verified it
  io_uring: park SQPOLL thread if it's percpu

Pill i3c fixes from Boris Brezillon:

 - fix the random PID check

 - fix the disable controller logic in the designware driver

 - fix I3C entry in MAINTAINERS

* tag 'i3c/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  MAINTAINERS: Fix the I3C entry
  i3c: dw: Fix dw_i3c_master_disable controller by using correct mask
  i3c: Fix the verification of random PID

Pull sound fixes from Takashi Iwai:
 "Two core fixes for long-standing bugs for the races at concurrent
  device creation and deletion that were (unsurprisingly) spotted by
  syzkaller with usb-fuzzer.

  The rest are usual small HD-audio fixes"

* tag 'sound-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - add two more pin configuration sets to quirk table
  ALSA: core: Fix card races between register and disconnect
  ALSA: info: Fix racy addition/deletion of nodes
  ALSA: hda: Initialize power_state field properly

Pull timer fixes from Ingo Molnar:
 "Misc clocksource driver fixes, and a sched-clock wrapping fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze()
  clocksource/drivers/timer-ti-dm: Remove omap_dm_timer_set_load_start
  clocksource/drivers/oxnas: Fix OX820 compatible
  clocksource/drivers/arm_arch_timer: Remove unneeded pr_fmt macro
  clocksource/drivers/npcm: select TIMER_OF

Pull perf fixes from Ingo Molnar:
 "Misc fixes:
   - various tooling fixes
   - kretprobe fixes
   - kprobes annotation fixes
   - kprobes error checking fix
   - fix the default events for AMD Family 17h CPUs
   - PEBS fix
   - AUX record fix
   - address filtering fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Avoid kretprobe recursion bug
  kprobes: Mark ftrace mcount handler functions nokprobe
  x86/kprobes: Verify stack frame on kretprobe
  perf/x86/amd: Add event map for AMD Family 17h
  perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()
  perf tools: Fix map reference counting
  perf evlist: Fix side band thread draining
  perf tools: Check maps for bpf programs
  perf bpf: Return NULL when RB tree lookup fails in perf_env__find_bpf_prog_info()
  tools include uapi: Sync sound/asound.h copy
  perf top: Always sample time to satisfy needs of use of ordered queuing
  perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user)
  tools lib traceevent: Fix missing equality check for strcmp
  perf stat: Disable DIR_FORMAT feature for 'perf stat record'
  perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_view
  perf header: Fix lock/unlock imbalances when processing BPF/BTF info
  perf/x86: Fix incorrect PEBS_REGS
  perf/ring_buffer: Fix AUX record suppression
  perf/core: Fix the address filtering fix
  kprobes: Fix error check when reusing optimized probes

Pull x86 fixes from Ingo Molnar:
 "Misc fixes all over the place: a console spam fix, section attributes
  fixes, a KASLR fix, a TLB stack-variable alignment fix, a reboot
  quirk, boot options related warnings fix, an LTO fix, a deadlock fix
  and an RDT fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
  x86/cpu/bugs: Use __initconst for 'const' init data
  x86/mm/KASLR: Fix the size of the direct mapping section
  x86/Kconfig: Fix spelling mistake "effectivness" -> "effectiveness"
  x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info"
  x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T
  x86/mm: Prevent bogus warnings with "noexec=off"
  x86/build/lto: Fix truncated .bss with -fdata-sections
  x86/speculation: Prevent deadlock on ssb_state::lock
  x86/resctrl: Do not repeat rdtgroup mode initialization

Pull scheduler fixes from Ingo Molnar:
 "A deadline scheduler warning/race fix, and a cfs_period_us quota
  calculation workaround where the real fix looks too involved to merge
  immediately"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Correctly handle active 0-lag timers
  sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup

Pull locking fixes from Ingo Molnar:
 "A lockdep warning fix and a script execution fix when atomics are
  generated"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomics: Don't assume that scripts are executable
  locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again

Pull cgroup fix from Tejun Heo:
 "A patch to fix a RCU imbalance error in the devices cgroup
  configuration error path"

* 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  device_cgroup: fix RCU imbalance in error case

Pull percpu fixlet from Dennis Zhou:
 "This stops printing the base address of percpu memory on
  initialization"

* 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: stop printing kernel addresses

Pull tty/serial fixes from Greg KH:
 "Here are five small fixes for some tty/serial/vt issues that have been
  reported.

  The vt one has been around for a while, it is good to finally get that
  resolved. The others fix a build warning that showed up in 5.1-rc1,
  and resolve a problem in the sh-sci driver.

  Note, the second patch for build warning fix for the sc16is7xx driver
  was just applied to the tree, as it resolves a problem with the
  previous patch to try to solve the issue. It has not shown up in
  linux-next yet, unlike all of the other patches, but it has passed
  0-day testing and everyone seems to agree that it is correct"

* tag 'tty-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sc16is7xx: put err_spi and err_i2c into correct #ifdef
  vt: fix cursor when clearing the screen
  sc16is7xx: move label 'err_spi' to correct section
  serial: sh-sci: Fix HSCIF RX sampling point adjustment
  serial: sh-sci: Fix HSCIF RX sampling point calculation

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
  mm/kmemleak.c: fix unused-function warning
  init: initialize jump labels before command line option parsing
  kernel/watchdog_hld.c: hard lockup message should end with a newline
  kcov: improve CONFIG_ARCH_HAS_KCOV help text
  mm: fix inactive list balancing between NUMA nodes and cgroups
  mm/hotplug: treat CMA pages as unmovable
  proc: fixup proc-pid-vm test
  proc: fix map_files test on F29
  mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
  mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
  mm: swapoff: shmem_unuse() stop eviction without igrab()
  mm: swapoff: take notice of completion sooner
  mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
  mm: swapoff: shmem_find_swap_entries() filter out other types
  slab: store tagged freelist for off-slab slabmgmt

Pull staging and IIO fixes from Greg KH:
 "Here is a bunch of IIO driver fixes, and some smaller staging driver
  fixes, for 5.1-rc6. The IIO fixes were delayed due to my vacation, but
  all resolve a number of reported issues and have been in linux-next
  for a few weeks with no reported issues.

  The other staging driver fixes are all tiny, resolving some reported
  issues in the comedi and most drivers, as well as some erofs fixes.

  All of these patches have been in linux-next with no reported issues"

* tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits)
  staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf
  staging: comedi: ni_usb6501: Fix use of uninitialized mutex
  staging: erofs: fix unexpected out-of-bound data access
  staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf
  staging: comedi: vmk80xx: Fix use of uninitialized semaphore
  staging: most: core: use device description as name
  iio: core: fix a possible circular locking dependency
  iio: ad_sigma_delta: select channel when reading register
  iio: pms7003: select IIO_TRIGGERED_BUFFER
  iio: cros_ec: Fix the maths for gyro scale calculation
  iio: adc: xilinx: prevent touching unclocked h/w on remove
  iio: adc: xilinx: fix potential use-after-free on probe
  iio: adc: xilinx: fix potential use-after-free on remove
  iio: dac: mcp4725: add missing powerdown bits in store eeprom
  io: accel: kxcjk1013: restore the range after resume.
  iio:chemical:bme680: Fix SPI read interface
  iio:chemical:bme680: Fix, report temperature in millidegrees
  iio: chemical: fix missing Kconfig block for sgp30
  iio: adc: at91: disable adc channel interrupt in timeout case
  iio: gyro: mpu3050: fix chip ID reading
  ...

Pull char/misc fixes from Greg KH:
 "Here are four small misc driver fixes for 5.1-rc6.

  Nothing major at all, they fix up a Kconfig issues, a SPDX invalid
  license tag, and two tiny bugfixes.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  drivers: power: supply: goldfish_battery: Fix bogus SPDX identifier
  extcon: ptn5150: fix COMPILE_TEST dependencies
  misc: fastrpc: add checked value for dma_set_mask
  habanalabs: remove low credit limit of DMA #0