After we received the dataend interrupt, R1 response register carries
the value from the automatically generated stop command. Report that
info back to the MMC block layer, so we will be notified in case of e.g.
ECC errors which happened during the last transfer.
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Halting the kernel on an unsupported stop command seems overkill, report
the error and say what we already did (due to autocmd12) instead.
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Making sure we match the actual register names.
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The current code assumes that DMA is finished before SD access end is
flagged. Thus, it schedules the 'dma_complete' tasklet in the SD card
interrupt routine when DATAEND is set. The assumption is not safe,
though. Even by mounting an SD card, it can be seen that sometimes DMA
complete is first, sometimes DATAEND. It seems they are usually close
enough timewise to not cause problems. However, a customer reported that
with CMD53 sometimes things really break apart. As a result, the BSP has
a patch which introduces flags for both events and makes sure both flags
are set before scheduling the tasklet. The customer accepted the patch,
yet it doesn't seem a proper upstream solution to me.

This patch refactors the code to replace the tasklet with already
existing and more lightweight mechanisms. First of all, we set the
callback in a DMA descriptor to automatically get notified when DMA is
done. In the callback, we then use a completion to make sure the SD
access has already ended. Then, we proceed as before.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

There is no check if clk_prepare_enable() succeed in sdhci_pxav2_probe().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Replace timeout magic numbers with proper constants.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Struct mmc_command includes a reference to the related mmc_request.
Therefore we don't have to store mrq separately in struct meson_host.
And we can remove some now unneeded WARN_ON's.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.

In addition write config register only if configuration changed.

Don't change the location of clock initialization as in an
earlier version of the patch, this change causes a hang.
This issue was reported and fix suggested by:
Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

CLK core does a deep copy of init.name, therefore it's fully ok to
provide a local variable.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The condition should be "if (ret)" as the disable/unprepare is
supposed to be executed if the previous command fails.
In addition adjust the error path in probe to properly deal
with the case that cfg_div_clk can be registered successfully
but enable/prepare fails.
In this case we shouldn't call clk_disable_unprepare.
Reported-by: NMichał Zegan <webczat_200@poczta.onet.pl>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Member mux_parent isn't used outside meson_mmc_clk_init. So remove it
and replace it with a local variable in meson_mmc_clk_init.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Because the DT requires a fixed number of mux parent clocks,
variable mux_parent_count can be replaced with constant
MUX_CLK_NUM_PARENTS, so remove it.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Member ocr_mask is never used and member irq we can replace with a
local variable in meson_mmc_probe. So let's remove both members.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The return value of meson_mmc_request_done and meson_mmc_read_resp
isn't used, so make both functions return void.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Core ensures that there are no commands with cmd->data being set and
nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
because cmd_cfg was zero-initialized and this bit isn't set.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Too much condition iteration makes the code
less readable. Slightly improve it.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

No functional change intended.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

No need to declar it there, remove it.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

No functional change intended.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

No functional change intended.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

No functional change intended.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Just use the readl_poll_timeout{_atomic} to avold open
coding them.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Pull UBI/UBIFS fixes from Richard Weinberger:
 "This contains fixes for issues in both UBI and UBIFS:

   - more O_TMPFILE fallout

   - RENAME_WHITEOUT regression due to a mis-merge

   - memory leak in ubifs_mknod()

   - power-cut problem in UBI's update volume feature"

* tag 'upstream-4.11-rc7' of git://git.infradead.org/linux-ubifs:
  ubifs: Fix O_TMPFILE corner case in ubifs_link()
  ubifs: Fix RENAME_WHITEOUT support
  ubifs: Fix debug messages for an invalid filename in ubifs_dump_inode
  ubifs: Fix debug messages for an invalid filename in ubifs_dump_node
  ubifs: Remove filename from debug messages in ubifs_readdir
  ubifs: Fix memory leak in error path in ubifs_mknod
  ubi/upd: Always flush after prepared for an update

Pull RAS fix from Thomas Gleixner:
 "The MCE atomic notifier callchain invokes callbacks which might sleep.

  Convert it to a blocking notifier and prevent calls from atomic
  context"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Make the MCE notifier a blocking one

Pull irq fix from Thomas Gleixner:
 "The (hopefully) final fix for the irq affinity spreading logic"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Fix calculating vectors to assign

Pull nfsd bugfix from Bruce Fields:
 "Fix a 4.11 regression that triggers a BUG() on an attempt to use an
  unsupported NFSv4 compound op"

* tag 'nfsd-4.11-2' of git://linux-nfs.org/~bfields/linux:
  nfsd: fix oops on unsupported operation

Pull networking fixes from David Miller:

 1) Don't race in IPSEC dumps, from Yuejie Shi.

 2) Verify lengths properly in IPSEC reqeusts, from Herbert Xu.

 3) Fix out of bounds access in ipv6 segment routing code, from David
    Lebrun.

 4) Don't write into the header of cloned SKBs in smsc95xx driver, from
    James Hughes.

 5) Several other drivers have this bug too, fix them. From Eric
    Dumazet.

 6) Fix access to uninitialized data in TC action cookie code, from
    Wolfgang Bumiller.

 7) Fix double free in IPV6 segment routing, again from David Lebrun.

 8) Don't let userspace set the RTF_PCPU flag, oops. From David Ahern.

 9) Fix use after free in qrtr code, from Dan Carpenter.

10) Don't double-destroy devices in ip6mr code, from Nikolay
    Aleksandrov.

11) Don't pass out-of-range TX queue indices into drivers, from Tushar
    Dave.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
  netpoll: Check for skb->queue_mapping
  ip6mr: fix notification device destruction
  bpf, doc: update bpf maintainers entry
  net: qrtr: potential use after free in qrtr_sendmsg()
  bpf: Fix values type used in test_maps
  net: ipv6: RTF_PCPU should not be settable from userspace
  gso: Validate assumption of frag_list segementation
  kaweth: use skb_cow_head() to deal with cloned skbs
  ch9200: use skb_cow_head() to deal with cloned skbs
  lan78xx: use skb_cow_head() to deal with cloned skbs
  sr9700: use skb_cow_head() to deal with cloned skbs
  cx82310_eth: use skb_cow_head() to deal with cloned skbs
  smsc75xx: use skb_cow_head() to deal with cloned skbs
  ipv6: sr: fix double free of skb after handling invalid SRH
  MAINTAINERS: Add "B:" field for networking.
  net sched actions: allocate act cookie early
  qed: Fix issue in populating the PFC config paramters.
  qed: Fix possible system hang in the dcbnl-getdcbx() path.
  qed: Fix sending an invalid PFC error mask to MFW.
  qed: Fix possible error in populating max_tc field.
  ...

Reducing real_num_tx_queues needs to be in sync with skb queue_mapping
otherwise skbs with queue_mapping greater than real_num_tx_queues
can be sent to the underlying driver and can result in kernel panic.

One such event is running netconsole and enabling VF on the same
device. Or running netconsole and changing number of tx queues via
ethtool on same device.

e.g.
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 0000000000001525
tsk->{mm,active_mm}->pgd = fff800130ff9a000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
kworker/48:1(475): Oops [#1]
CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G           OE
4.11.0-rc3-davem-net+ #7
Workqueue: events queue_process
task: fff80013113299c0 task.stack: fff800131132c000
TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y:
00000000    Tainted: G           OE
TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]>
g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3:
0000000000000001
g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7:
00000000000000c0
o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3:
0000000000000003
o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc:
000000000049ed94
RPC: <set_next_entity+0x34/0xb80>
l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3:
0000000000000000
l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7:
fff8001fa7605028
i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3:
0000000000000000
i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7:
00000000103fa4b0
I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]>
Call Trace:
 [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe]
 [0000000000998c74] netpoll_start_xmit+0xf4/0x200
 [0000000000998e10] queue_process+0x90/0x160
 [0000000000485fa8] process_one_work+0x188/0x480
 [0000000000486410] worker_thread+0x170/0x4c0
 [000000000048c6b8] kthread+0xd8/0x120
 [0000000000406064] ret_from_fork+0x1c/0x2c
 [0000000000000000]           (null)
Disabling lock debugging due to kernel taint
Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe]
Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200
Caller[0000000000998e10]: queue_process+0x90/0x160
Caller[0000000000485fa8]: process_one_work+0x188/0x480
Caller[0000000000486410]: worker_thread+0x170/0x4c0
Caller[000000000048c6b8]: kthread+0xd8/0x120
Caller[0000000000406064]: ret_from_fork+0x1c/0x2c
Caller[0000000000000000]:           (null)
Signed-off-by: NTushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrey Konovalov reported a BUG caused by the ip6mr code which is caused
because we call unregister_netdevice_many for a device that is already
being destroyed. In IPv4's ipmr that has been resolved by two commits
long time ago by introducing the "notify" parameter to the delete
function and avoiding the unregister when called from a notifier, so
let's do the same for ip6mr.

The trace from Andrey:
------------[ cut here ]------------
kernel BUG at net/core/dev.c:6813!
invalid opcode: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Workqueue: netns cleanup_net
task: ffff880069208000 task.stack: ffff8800692d8000
RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813
RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297
RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569
RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000
R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070
R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000
FS:  0000000000000000(0000) GS:ffff88006cb00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0
Call Trace:
 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881
 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880
 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346
 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647
 call_netdevice_notifiers net/core/dev.c:1663
 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841
 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881
 unregister_netdevice_many net/core/dev.c:7880
 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333
 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144
 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463
 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097
 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231
 kthread+0x35e/0x430 kernel/kthread.c:231
 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89
47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f>
0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00
RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0
---[ end trace e0b29c57e9b3292c ]---
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add various related files that have been missing under
BPF entry covering essential parts of its infrastructure
and also add myself as co-maintainer.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If skb_pad() fails then it frees the skb so we should check for errors.

Fixes: bdabad3e ("net: Add Qualcomm IPC router")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maps of per-cpu type have their value element size adjusted to 8 if it
is specified smaller during various map operations.

This makes test_maps as a 32-bit binary fail, in fact the kernel
writes past the end of the value's array on the user's stack.

To be quite honest, I think the kernel should reject creation of a
per-cpu map that doesn't have a value size of at least 8 if that's
what the kernel is going to silently adjust to later.

If the user passed something smaller, it is a sizeof() calcualtion
based upon the type they will actually use (just like in this testcase
code) in later calls to the map operations.

Fixes: df570f57 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>

Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d3997 ("ipv6: Create percpu rt6_info")
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 07b26c94 ("gso: Support partial splitting at the frag_list
pointer") assumes that all SKBs in a frag_list (except maybe the last
one) contain the same amount of GSO payload.

This assumption is not always correct, resulting in the following
warning message in the log:
    skb_segment: too many frags

For example, mlx5 driver in Striding RQ mode creates some RX SKBs with
one frag, and some with 2 frags.
After GRO, the frag_list SKBs end up having different amounts of payload.
If this frag_list SKB is then forwarded, the aforementioned assumption
is violated.

Validate the assumption, and fall back to software GSO if it not true.

Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212
Fixes: 07b26c94 ("gso: Support partial splitting at the frag_list pointer")
Signed-off-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: use skb_cow_head() to deal with cloned skbs

James Hughes found an issue with smsc95xx driver. Same problematic code
is found in other drivers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can use skb_cow_head() to properly deal with clones,
especially the ones coming from TCP stack that allow their head being
modified. This avoids a copy.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: 4a476bd6 ("usbnet: New driver for QinHeng CH9200 devices")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>