1/ notify waiters when controller stop completes (fixes 10 second stall
   unloading the driver)
2/ make sure phy stop is after port and device stop

Cc: Richard Boyd <richard.g.boyd@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Based on an original implementation by Ed Nadolski and Artur Wojcik

In preparation for S3/S4 support refactor initialization so that
driver-load and resume-from-suspend can share the common init path of
isci_host_init().  Organize the initialization into objects that are
self-contained to the driver (initialized by isci_host_init) versus
those that have some upward registration (initialized at allocation time
asd_sas_phy, asd_sas_port, dma allocations).  The largest change is
moving the the validation of the oem and module parameters from
isci_host_init() to isci_host_alloc().

The S3/S4 approach being taken is that libsas will be tasked with
remembering the state of the domain and the lldd is free to be
forgetful.  In the case of isci we'll just re-init using a subset of the
normal driver load path.

[clean up some unused / mis-indented function definitions in host.h]
Signed-off-by: NEd Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NArtur Wojcik <artur.wojcik@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Another unused field, and isci_port_init is overkill.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

They serve no incremental purpose over the existing sas_ha state.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Per the SAS spec, several types of BROADCAST CHANGE primitives
must cause re-discovery of the originating expander.
Only the standard BROADCAST CHANGE primitive was being
sent to the LIBSAS layer.  The other BC primitives have been
added to the sci_phy_event_handler()
Signed-off-by: NTom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Holdovers from the initial driver cleanup, replace with enum sas_protocol.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

domain_device ->parent conveys the same information.

Occurrences of ->is_direct_attached appear next to incomplete open-coded
versions of dev_is_sata(), clean those up as well.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Convert controller state machine warnings to emit the state number (it
missed the number to string conversion, but since these error rarely
happen not much motivation to go further).

Fix up the rnc warnings to use the state name.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Fix a use-after-free in the TMF path, where cmd may have been already
freed by virtscsi_complete_free when wait_for_completion restarts
executing virtscsi_tmf.  Technically a race, but in practice the command
will always be freed long before the completion waiter is awoken.

The fix is to make callers specifying a completion responsible for
freeing the command in all cases.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Commit 6f381fa3
Author: Lin Ming <ming.m.lin@intel.com>

[SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
 
Caused a regression where we oops in every legacy mode SCSI host driver
because they supply a NULL pointer to scsi_add_host().  Fix this by checking
for the NULL in scsi_add_host_with_dma() and changing the DMA device to being
the platform_bus in that case (which replicates the original behaviour).
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

[jejb: checkpatch fixes]
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

In case of firmmware detected under-run condition and scsi status of
task_set_full or busy_condition, return that to the mid layer for proper error
handling instead of DID_ERROR (which causes error handler activation and a
full retry).
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

A previous commit changed the mfs checking to ensure the new
mfs is less or equal to the mfs supported by the FCF. This
doesn't work for BRDCM cards as they set an mfs of 2048 regardless
of whether the switch returns a larger mfs.

This patch validates the new mfs against the upper and lower spec
defined boundries for a FCoE mfs.
Signed-off-by: NVasu Dev <vasu.dev@intel.com>
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This reverts commit a692b0ee.

Tom reports:

[    8.741033] ------------[ cut here ]------------
[    8.741038] WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0xc1/0xf0()
[    8.741040] Hardware name: To Be Filled By O.E.M.
[    8.741041] sysfs: cannot create duplicate filename

...and missing 2 out of 4 drives connected to mvsas.  Commit a692b0ee
made the assumption that all the phy ids an lldd registers to libsas are
unique.  However, in the "multi-chip" case mvsas does a rather annoying
duplication of phy ids in the array passed to libsas.  So, for example,
chip0 has phy0-3 at ha phy index 0-3 and chip1 has its phy0-3 at ha phy
index 4-7.  The more natural model would be to create a scsi_host (and
sas_ha) per chip (controller), but for now revert the naming fix which
unfortunately means dealing with unpredictable end-device names for a
bit longer.

Cc: Xiangliang Yu <yuxiangl@marvell.com>
Cc: Patrick Thomson <patrick.s.thomson@intel.com>
Reported-by: NTom Rini <trini@ti.com>
Tested-by: NTom Rini <trini@ti.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Normalize phy->attached_sas_addr to return a zero-address in the case
when device-type == NO_DEVICE or the linkrate is invalid to handle
expanders that put non-zero sas addresses in the discovery response:

 sas: ex 5001b4da000f903f phy02:U:0 attached: 0100000000000000 (no device)
 sas: ex 5001b4da000f903f phy01:U:0 attached: 0100000000000000 (no device)
 sas: ex 5001b4da000f903f phy03:U:0 attached: 0100000000000000 (no device)
 sas: ex 5001b4da000f903f phy00:U:0 attached: 0100000000000000 (no device)
Reported-by: NAndrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This changes the ordering of initialization and probing events from:
  1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate ata_port and schedule port probe in DISCE_PROBE
...to:
  1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  3/ schedule port probe in DISCE_PROBE

This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to
destrory ata devices before they have been fully initialized:

  BUG: unable to handle kernel paging request at 0000000000003b10
  IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas]
  ...
  [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas]
  [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas]
  [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas]
  [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas]
  [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas]

...and kills the awkward "sata domain_device briefly existing in the
domain without an ata_port" state.
Reported-by: NMichal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The check_ready implementation in the expander-attached ata device case
polls on sas_ex_phy_discover().  The effect is that the ex_phy fields
(critically ->attached_sas_addr) can change.  When ata_eh ends and
libsas comes along to revalidate the domain
sas_unregister_devs_sas_addr() can fail to lookup devices to remove, or
fail to re-add an ata device that ata_eh marked as disabled.  So change
the code to skip the sas_address and change count updates when ata_eh is
active.

Cc: Jack Wang <jack_wang@usish.com>
Tested-by: NMaciej Patelczyk <maciej.patelczyk@intel.com>
Tested-by: NBartek Nowakowski <bartek.nowakowski@intel.com>
Tested-by: NJacek Danecki <jacek.danecki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Since the domain_device can out live the scsi_target we need the rphy to
follow suit otherwise we run into issues like:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
  IP: [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas]
  PGD 0
  Oops: 0000 [#1] SMP
  CPU 1
  Modules linked in: ses enclosure isci libsas scsi_transport_sas fuse sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf microcode pcspkr igb joydev iTCO_wdt ioatdma iTCO_vendor_support i2c_i801 i2c_core dca wmi hed ipv6 pata_acpi ata_generic [last unloaded: scsi_wait_scan]

  Pid: 129, comm: kworker/u:3 Not tainted 3.3.0-rc5-isci+ #1 Intel Corporation SandyBridge Platform/To be filled by O.E.M.
  RIP: 0010:[<ffffffffa011561b>] [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas]
  RSP: 0018:ffff88042232dd70 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8804283165b8 RCX: ffff88042232dda0
  RDX: ffff88042232dd78 RSI: ffff8804283165b8 RDI: ffffffffa01188d7
  RBP: ffff88042232ddd0 R08: ffff880388454000 R09: ffff8803edfde1f8
  R10: ffff8803edfde1f8 R11: ffff8803edfde1f8 R12: ffff880428316750
  R13: ffff880388454000 R14: ffff8803f88b31d0 R15: ffff8803f8b21d50
  FS: 0000000000000000(0000) GS:ffff88042ee20000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000050 CR3: 0000000001a05000 CR4: 00000000000406e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:3 (pid: 129, threadinfo ffff88042232c000, task ffff88042230c920)
  Stack:
  0000000000000000 ffff880400000018 ffff88042232dde0 ffff88042232dda0
  ffffffffa01188c4 ffff88042ee93af0 ffff88042232ddb0 ffffffff8100e047
  ffff88042232de10 ffff880420e5a2c8 ffff8803f8b21d50 ffff8803edfde1f8
  Call Trace:
  [<ffffffff8100e047>] ? load_TLS+0xb/0xf
  [<ffffffffa01156ad>] async_sas_ata_eh+0x66/0x95 [libsas]
  [<ffffffff810655e1>] async_run_entry_fn+0x9e/0x131
Reported-by: NTom Jackson <thomas.p.jackson@intel.com>
Tested-by: NTom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Commit 899fcf40 "[SCSI] libsas: set attached device type and target
protocols for local phys" setup 'phy' to be dereferenced after
list_for_each_entry(phy, &port->phy_list, port_phy_el) (i.e. phy ==
&port->phy_list) resulting in reports like:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000002b0
  IP: [<ffffffffa00ce948>] sas_discover_domain+0x29e/0x4fb [libsas]

...fix by deferring sas_phy_set_target() to the end of
sas_get_port_device().
Reported-by: NTom Jackson <thomas.p.jackson@intel.com>
Tested-by: NTom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If an expander reports 'PHY VACANT' for a phy index prior to the one
that generated a BCN libsas fails rediscovery.  Since a vacant phy is
defined as a valid phy index that will never have an attached device
just continue the search.

Cc: <stable@vger.kernel.org>
Signed-off-by: NThomas Jackson <thomas.p.jackson@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When requeuing work to a draining workqueue the last work instance may
not be idle, so sas_queue_work() must not touch work->entry.  Introduce
sas_work with a drain_node list_head to have a private list for
collecting work deferred due to drain collision.

Fixes reports like:
  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Currently, __scsi_alloc_queue uses SCSI host's parent device
as DMA device to set segment boundary. But the parent device may not
refer to the DMA device. For example, for ATA disk, SCSI host's parent
device now refers to ATA port.

Since commit d139b9bd([SCSI] scsi_lib_dma: fix bug with dma maps on
nested scsi objects), a new field Scsi_Host->dma_dev was introduced
to refer to the real DMA device.

Use ->dma_dev in __scsi_alloc_queue to correctly set segment
boundary.

Bug report: http://marc.info/?l=linux-ide&m=133177818318187&w=2Reported-and-tested-by: NJörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Commit 18a4d0a2 ("[SCSI] Handle disk devices which can not process
medium access commands") introduced a bug in which we would attempt to
dereference the scsi driver even when the device had no ULD attached.

Ensure that a driver is registered and make the driver accessor function
more resilient to errors during device discovery.
Reported-by: NElric Fu <elricfu1@gmail.com>
Reported-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The latest generation of ipr hardware performs best when command blocks
are aligned to a boundary equal to the size of the command block. Ensure
512 byte alignment, since this is the largest size command block we
can send.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Increase the total number of max concurrent outstanding commands
for the most recent family of adapters in order to improve overall
adapter performance.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The ipr driver added some memory barriers in order to ensure
a PowerPC sync instruction was executed prior to sending a
command to the adapter to ensure the command block was
coherent with respect to the PCI bus's view of memory.
However, some time ago, the powerpc architecture writel
macros were changed to include the sync since most drivers
don't properly handle this. So remove these memory barriers
since they are not needed and result in executing twice
as many sync instructions, which has a significant performance
penalty.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The latest ipr hardware no longer requires the driver to issue any MMIOs
to clear the interrupt so remove this to optimize performance.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

For the latest ipr SAS adapters, target id's are a completely
logical construct that are managed in the ipr driver. This fixes
an issue that can arise if a device is deleted via sysfs. If
a new device is then physically added, it will use the previous
device's target id. If the host is then rescanned, the device
that had been deleted, since it is using the same target id as
the new device is using, will never be found, resulting in
a missing device. Fix this by only freeing the target id
only if the resource is actually gone.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

commit 44c10138 (PCI: Change all
drivers to use pci_device->revision) converted all drivers to use
pci_dev->revision.  Convert these three drivers which got missed.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The rtnl_lock is primarily used to serialize networking
driver changes as well as to ensure that a networking driver
is not removed when making changes to it. fcoe also uses
the rtnl_lock to protect the fcoe hostlist.

fcoe_create holds the rtnl_lock over the entirity of the
routine including a the call to fcoe_ctlr_link_up.
This causes the below deadlock because fcoe_ctlr_link_up
acquires the fcoe_ctlr ctlr_mutex and this deadlocks with
a libfcoe thread that acquires the fcoe_ctlr ctlr_mutex and
then the rtnl_lock (to update a MAC address).

This patch drops the rtnl_lock before calling
fcoe_ctlr_link_up and therefore the deadlock is prevented.

https://bugzilla.kernel.org/show_bug.cgi?id=42918

the existing dependency chain (in reverse order) is:

-> #1 (&fip->ctlr_mutex){+.+...}:
       [<c1091f70>] lock_acquire+0x80/0x1b0
       [<c147655d>] mutex_lock_nested+0x6d/0x340
       [<f8970c32>] fcoe_ctlr_link_up+0x22/0x180 [libfcoe]
       [<f894620e>] fcoe_create+0x47e/0x6e0 [fcoe]
       [<f8973dd3>] fcoe_transport_create+0x143/0x250 [libfcoe]
       [<c10527e0>] param_attr_store+0x30/0x60
       [<c1052696>] module_attr_store+0x26/0x40
       [<c11a201e>] sysfs_write_file+0xae/0x100
       [<c11449df>] vfs_write+0x8f/0x160
       [<c1144cbd>] sys_write+0x3d/0x70
       [<c147a0c4>] syscall_call+0x7/0xb

-> #0 (rtnl_mutex){+.+.+.}:
       [<c109164b>] __lock_acquire+0x140b/0x1720
       [<c1091f70>] lock_acquire+0x80/0x1b0
       [<c147655d>] mutex_lock_nested+0x6d/0x340
       [<c13a10c4>] rtnl_lock+0x14/0x20
       [<f89445ac>] fcoe_update_src_mac+0x2c/0xb0 [fcoe]
       [<f8971712>] fcoe_ctlr_timer_work+0x712/0xb60 [libfcoe]
       [<c104fb69>] process_one_work+0x179/0x5d0
       [<c10502f1>] worker_thread+0x121/0x2d0
       [<c10550ed>] kthread+0x7d/0x90
       [<c1481a82>] kernel_thread_helper+0x6/0x10

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&fip->ctlr_mutex);
                               lock(rtnl_mutex);
                               lock(&fip->ctlr_mutex);
  lock(rtnl_mutex);

 *** DEADLOCK ***
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Made changes to set the rport maxfrsize param to use a value that is
equal to or less than the Buffer-to-Buffer Receive Data_Field size
specified in the Common Service Parameters.
Increased the diag memtest timeout for the Brocade-1860 adapters.
Made changes to enable valid port speed configuration check for all adapters.
Made changes to increase the max hw segments in a request, in order to
support larger data transfers from user space.
Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Fixed the LPS (Logical Port Services) state machine to send a
FDISC/FLOGI to the FW from the request queue wait state, when
there is space available again on the request queue.
Made changes to free the vport on LOGO/cleanup complete instead
of free'ing it from vport_delete_handler in the module unload scenario.
Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>