- 28 4月, 2010 4 次提交
-
-
由 Elina Pasheva 提交于
Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Signed-off-by: NRory Filer <rfiler@sierrawireless.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Torgny Johansson 提交于
Autosuspend works until you bring the wwan interface up, then the device does not enter autosuspend anymore. The following patch fixes the problem by setting the .manage_power field in the mbm_info struct to the same as in the cdc_info struct (cdc_manager_power). Signed-off-by: NTorgny Johansson <torgny.johansson@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The calls to usb_free_buffer() dereference rx_urb and tx_urb in the parameter list but those could be NULL. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NL. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Hartmann 提交于
akpm: reluctantly typed in from https://bugzilla.kernel.org/show_bug.cgi?id=15599Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2010 1 次提交
-
-
由 Diego Giagio 提交于
Add new driver to use tethering with an iPhone device. After initial submission, apply fixes to fit the new driver into the kernel standards. There are still a couple of minor (almost cosmetic-level) issues, but the driver is fully functional right now. Signed-off-by: NL. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: NDiego Giagio <diego@giagio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 19 3月, 2010 1 次提交
-
-
由 Steve Glendinning 提交于
TX checksum offload does not work properly when transmitting UDP packets with 0, 1 or 2 bytes of data. This patch works around the problem by calculating checksums for these packets in the driver. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2010 2 次提交
-
-
由 Steve Glendinning 提交于
This patch ensures the PHY correctly completes its reset before setting register values. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve Glendinning 提交于
This patch adds a driver for SMSC's LAN7500 family of USB 2.0 to gigabit ethernet adapters. It's loosely based on the smsc95xx driver but the device registers for LAN7500 are completely different. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 3月, 2010 1 次提交
-
-
由 Christoph Egger 提交于
CONFIG_HSO_AUTOPM is set by KConfig / set in the Kernel source, makefiles and won't be ever set this way, therefor simply removing the protected code. Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2010 1 次提交
-
-
由 Jussi Kivilinna 提交于
Setting new MAC address only worked when device was set to promiscuous mode. Fix MAC address by writing new address to device using undocumented command AX_CMD_READ_NODE_ID+1. Patch is tested with AX88772 device. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Hollis <dhollis@davehollis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2010 1 次提交
-
-
由 Petko Manolov 提交于
This one removes trailing whitespace in pegasus.h and more importantly adds new Pegasus compatible device. Signed-off-by: NJulian Brown <julian@codesourcery.com> Signed-off-by: NPetko Manolov <petkan@nucleusys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 2月, 2010 1 次提交
-
-
由 Torgny Johansson 提交于
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: NTorgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
also removed needless checks in smsc95xx Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2010 2 次提交
-
-
由 Joe Perches 提交于
Convert from: if (netif_msg_<foo>(priv)) dev_<level>(dev... to netif_<level>(priv, foo, dev... Also convert a few: if (i < REG_TIMEOUT) { etc... return ret; } to if (i >= REG_TIMEOUT) goto fail; etc... return ret; Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
These macros are too similar to the dev_<level> equivalents but take a usbnet * argument. Convert them to the recently introduced netdev_<level> macros and remove the old macros. The old macros had "\n" appended to the format string. Add the "\n" to the converted uses. Some existing uses of the dev<foo> macros in cdc_eem.c probably mistakenly had trailing "\n". No "\n" added there. Fix net1080 this/other log message inversion. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2010 4 次提交
-
-
由 Andreas Mohr 提交于
ChangeLog: Implement .reset_resume support to retain a live network connection during suspend despite USB power loss. - rework operation to reference cached data in mcs7830_data and netdev->dev_addr - update netdev->dev_addr only in case new MAC was set successfully . Tests done: . ethtool -d pre-/post-suspend: register values match . running ssh session suspend, resume: works . ifdown device, suspend, resume: works . ifup, suspend, unplug, resume: WORKS (eth1 is removed, re-ifup of eth1 after card replug works) . verified identical MAC in ifconfig post-resume (ok, should be verified on network side to be fully certain...) Keywords: suspend resume network connection dead interface down Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Mohr 提交于
ChangeLog: - rename register, add comment Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Mohr 提交于
ChangeLog: - spelling corrections / whitespace Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Mohr 提交于
ChangeLog: - evaluate Rx error statistics from trailing Rx status byte - add driver TODO list - add myself to authors Quilt series run-tested, based on 2.6.33-rc4 (net-2.6.git mcs7830 has idle history, should be good to go). Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2010 1 次提交
-
-
由 Ben Hutchings 提交于
Commit 37e8273c ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in <http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Tested-by: NAvi Rozen <avi.rozen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2010 6 次提交
-
-
由 Jan Dumon 提交于
Fixed missing newlines in calls to dev_warn & dev_err. Signed-off-by: NJan Dumon <j.dumon@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Dumon 提交于
Don't send flow control settings to any port other than the modem port. Older firmware ignored this request but did sent a reply. Newer firmware just ignores it without reply and causes a 5 second timeout every time a port (except for the modem port) is opened or if tiocm settings are changed. Signed-off-by: NJan Dumon <j.dumon@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Dumon 提交于
Attempt to reset the usb device when we receive usb bus errors. Signed-off-by: NJan Dumon <j.dumon@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Dumon 提交于
Don't change the state of a port if it's not open. This fixes an issue where a port sometimes has to be opened twice before data can be received. Signed-off-by: NJan Dumon <j.dumon@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Dumon 提交于
Some fields are always little endian and have to be converted on big endian machines. Signed-off-by: NJan Dumon <j.dumon@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Dumon 提交于
Add product ID's for new devices. Signed-off-by: NJan Dumon <j.dumon@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2010 1 次提交
-
-
由 roel kluin 提交于
With `while (i++ < MII_TIMEOUT)' i reaches MII_TIMEOUT + 1 after the loop This is probably unlikely a problem in practice. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2009 2 次提交
-
-
由 H Hartley Sweeten 提交于
Use the %pM kernel extension to display the MAC address. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 H Hartley Sweeten 提交于
Use the %pM kernel extension to display the MAC address. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
sizeof(dev->dev_addr) is the size of a pointer. A few lines above, the size of this field is obtained using netdev->addr_len for a call to memcpy, so do the same here. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2009 1 次提交
-
-
由 Oliver Neukum 提交于
This patch removes a rare use of the USB power management API which won't be supported after the conversion to the new generic runtime power management framework. Functionality is not altered. Signed-off-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2009 4 次提交
-
-
由 André Goddard Rosa 提交于
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Oliver Neukum 提交于
Using remote wakeup and delayed transmission to allow online device to go into usb autosuspend. Minimal alternate support for devices that don't support remote wakeup. Signed-off-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
Normal resume can do double duty as reset_resume() for this driver as it keeps no state in the device Signed-off-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2009 2 次提交
-
-
由 Antti Kaijanmäki 提交于
Fix soft-lockup in hso.c which is triggered on SMP machine when modem is removed while file descriptor(s) under /dev are still open: old version called kref_put() too early which resulted in destroying hso_serial and hso_device objects which were still used later on. Signed-off-by: NAntti Kaijanmäki <antti.kaijanmaki@nomovok.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antti Kaijanmäki 提交于
Signed-off-by: NAntti Kaijanmäki <antti.kaijanmaki@nomovok.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-