Add functions to read out the CPU and PCH transcoder M/N values,
and use them to fill out the pipe config dp_m_n information. And
while at it populate has_dp_encoder too.

Also refactor ironlake_get_fdi_m_n_config() to simply call the new
intel_cpu_transcoder_get_m_n() function.

v2: Remember the DDI
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On CTG+ read out the pipe bpp setting from hardware and fill it into
pipe config. Also check it appropriately.

v2: Don't do the pipe_bpp extraction inside the PCH only code block on
    ILK+.
    Avoid the PIPECONF read as we already have read it for the
    PIPECONF_EANBLE check.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It would be easier if adjusted_mode.clock would be the pipe pixel clock,
and it actually is, except for the cases where pixel_multiplier > 1.

So let's change intel_sdvo to use port_clock as the multiplied clock,
and then we can leave adjusted_mode.clock as pipe pixel clock.

v2: Improve port_clock documentation
    Rebased on top of SDVO pixel_multiplier fixes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We feed the non-multiplied clock to intel_link_compute_m_n(), so the
opposite operation should use the same order of operations. So we just
multiply by pixel_multiplier in the end now.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because this PCI config register doesn't exist on Gen5+.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both callers had code to sanitize the uncore and restore the GTT
mappings just before calling __i915_drm_thaw, so Chris suggested I
should unify the code.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When reserving objects during execbuf, it is possible to come across an
object which will not fit given the current fragmentation of the address
space. We do not have any defragment in drm_mm, so the strategy is to
instead evict everything, and reallocate objects.

With the upcoming addition of multiple VMs, there is no point to evict
everything since doing so is overkill for the specific case mentioned
above.
Recommended-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: One additional s/evict_everything/evict_vm/ to update a
comment in the code.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we'll see in the next patch, being able to evict for just 1 VM is
handy.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

lifted from Daniel:
pread/pwrite isn't about the object's domain at all, but purely about
synchronizing for outstanding rendering. Replacing the call to
set_to_gtt_domain with a wait_rendering would imo improve code
readability. Furthermore we could pimp pread to only block for
outstanding writes and not for reads.

Since you're not the first one to trip over this: Can I volunteer you
for a follow-up patch to fix this?

v2: Switch the pwrite patch to use \!read_only. This was a typo in the
original code. (Chris, Daniel)
Recommended-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Fix up the logic fumble - wait_rendering has a bool readonly
paramater, set_to_gtt_domain otoh has bool write. Breakage reported by
Jani Nikula, I've double-checked that igt/gem_concurrent_blt/prw-*
would have caught this.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fixed with

commit 10603caa
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Aug 26 19:51:06 2013 -0300

    drm/i915: Apply the force-detect VGA w/a to Valleyview
Signed-off-by: NJesse Barnes <jbarnes@virtuosugeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_ddi_enable_transcoder_func() picked the sync flags from crtc->mode
instead of the pipe config adjusted_mode. Fix the problem and hopefully
rid my HSW machine of the remaining pipe config warnings.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The purpose of the function is to find out whether the object is still
bound in any address space. This can be easily checked by looking at the
vma currently associated with the object, rather than asking if any of
the global address spaces have an active vma on the object.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ignoring the legacy DRI1 code, and a couple of special cases (to be
discussed later), all access to the ring is mediated through requests.
The first write to a ring will grab a seqno and mark the ring as having
an outstanding_lazy_request. Either through explicitly adding a request
after an execbuffer or through an implicit wait (either by the CPU or by
a semaphore), that sequence of writes will be terminated with a request.
So we can ellide all the intervening writes to the tail register and
send the entire command stream to the GPU at once. This will reduce the
number of *serialising* writes to the tail register by a factor or 3-5
times (depending upon architecture and number of workarounds, context
switches, etc involved). This becomes even more noticeable when the
register write is overloaded with a number of debugging tools. The
astute reader will wonder if it is then possible to overflow the ring
with a single command. It is not. When we start a command sequence to
the ring, we check for available space and issue a wait in case we have
not. The ring wait will in this case be forced to flush the outstanding
register write and then poll the ACTHD for sufficient space to continue.

The exception to the rule where everything is inside a request are a few
initialisation cases where we may want to write GPU commands via the CS
before userspace wakes up and page flips.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pull the expected max WM level determinations out to a separate
function. Will have another user soon.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Unify the code a bit to use ilk_compute_wm_level for all watermark
levels.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hsw_pipe_wm_parameters and hsw_wm_maximums typically are read only. Make
them const.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make the call to intel_update_watermarks() just once or twice during
modeset. Ideally it should happen independently when each plane gets
enabled/disabled, but for now it seems better to keep it in central
place. We can improve things when we get all the planes sorted out
in a better way.

When enabling set up the watermarks just before the pipe is enabled.
And when disabling we need to wait until we've marked the crtc as
inactive, as otherwise intel_crtc_active() would still think the pipe
is enabled and the computed watermarks would reflect that.

v2: Pimp up the commit message a bit
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Passing the appropriate crtc to intel_update_watermarks() should help
in avoiding needless work in the future.

v2: Avoid clash with internal 'crtc' variable in some wm functions
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Score and action reveals what all the rings were doing
and why hang was declared. Add idle state so that
we can distinguish between waiting and idle ring.

v2: - add idle as a hangcheck action
    - consensed hangcheck status to single line (Chris)
    - mark active explicitly when we are making progress (Chris)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now when we have mechanism in place to track which context
was guilty of hanging the gpu, it is possible to punish
for bad behaviour.

If context has recently submitted a faulty batchbuffers guilty of
gpu hang and submits another batch which hangs gpu in quick
succession, ban it permanently. If ctx is banned, no more
batchbuffers will be queued for execution.

There is no need for global wedge machinery anymore and
it would be unwise to wedge the whole gpu if we have multiple
hanging batches queued for execution. Instead just ban
the guilty ones and carry on.

v2: Store guilty ban status bool in gpu_error instead of pointers
    that might become danling before hang is declared.

v3: Use return value for banned status instead of stashing state
    into gpu_error (Chris Wilson)

v4: - rebase on top of fixed hang stats api
    - add define for ban period
    - rename commit and improve commit msg

v5: - rely context banning instead of wedging the gpu
    - beautification and fix for ban calculation (Chris)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV has per-pipe PP registers. Set up power sequencing on mode set. The
connector init time setup is problematic, since we don't have a pipe at
that time. Cook up something.

v2:
 - use vlv_power_sequencer_pipe() also in _pp_{ctrl,stat}_reg()
 - use PANEL_PORT_SELECT_DPC_VLV (Ville)

v3: make checkpatch happier
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Make checkpatch a bit more happier still ...]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove duplicates, add VLV specific macros for port B and C.

v2: also add PANEL_PORT_SELECT_DPC_VLV for clarity (Ville)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Follow-up to
commit 5004945f
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Tue Jul 30 12:20:32 2013 +0300

    drm/i915: move encoder->enable callback later in VLV crtc enable

v2: Rebase on the renamed enable hooks, adding clarity (Ville)

Reference: http://mid.gmane.org/CAKMK7uFs9EMvMW8BnS24e5UNm1D7JrfVg3SD5SDFtVEamGfOOg@mail.gmail.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In line with the rest of the code base. No functional changes.

v2: also s/intel_pre_enable_dp/g4x_pre_enable_dp/ for consistency (Ville)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's totally unused, so remove the last mode_fixup appearance in i915.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The patch doesn't contain functional change, but is to prepare for
future platform which has different DPIO phy.  The additional pipe
parameter will use to select which phy to target for.

v2: Update the commit message and add static for the new function.
(Jani/Ville)
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It is possible for us to be forced to perform an allocation for the lazy
request whilst running the shrinker. This allocation may fail, leaving
us unable to reclaim any memory leading to premature OOM. A neat
solution to the problem is to preallocate the request at the same time
as acquiring the seqno for the ring transaction. This means that we can
report ENOMEM prior to touching the rings.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prior to preallocating an request for lazy emission, rename the existing
field to make way (and differentiate the seqno from the request struct).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ironlake_fdi_compute_config() already checks that we have enough
FDI bandwidth. And it doesn't just use a hardcoded value but takes
into account factors such as the actual FDI frequency, shared FDI
B/C lanes, etc.
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For DP pll settings, there is only two golden configs.  Instead of
running through the algorithm to determine it, hardcode the value and get it
determine in intel_dp_set_clock.

v2: Rework on the intel_limit compiler warning. (Jani)
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
[danvet: Fix up checkpatch issues.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

eDP 1.4 supports 4-5 extra link rates in additional to current 2 link
rate.  Create a structure to store the DPLL divisor data to improve
readability.

v2: Fix the gen4_dpll/pch_dpll initialization to C99
designated initializers, and use a single loop for all platforms. (Jani and Daniel)
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
[danvet: Fix up checkpatch warnings.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The spec says to notify prior to power down and after power up. It is
unclear whether it makes a difference.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Notifying the bios lets it enter power saving states.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The bios interface seems messy, and it's hard to tell what the bios
really wants. At first, only add support for DDI based machines (hsw+),
and see how it turns out.

The spec says to notify prior to power down and after power up. It is
unclear whether it makes a difference.

v2:
 - squash notification function and callers patches together (Daniel)
 - move callers to haswell_crtc_{enable,disable} (Daniel)
 - rename notification function (Chris)

v3:
 - separate notification function and callers again, as it's not clear
   whether the display power state notification is the right thing to do
   after all

v4: per Paulo's review:
 - drop LVDS
 - WARN on unsupported encoder types
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In preparation for followup work.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

SWSCI is a driver to bios call interface.

This checks for SWSCI availability and bios requested callbacks, and
filters out any calls that shouldn't happen. This way the callers don't
need to do the checks all over the place.

v2: silence some checkpatch nagging

v3: set PCI_SWSCI bit 0 to trigger interrupt (Mengdong Lin)

v4: remove an extra #define (Jesse)

v5: spec says s/w is responsible for clearing PCI_SWSCI bit 0 too

v6: per Paulo's review and more:
 - fix sub-function mask
 - add exit parameter
 - add define for set panel details call
 - return more errors from swsci
 - clean up the supported/requested callbacks bit masks mess
 - use DSLP for timeout
 - fix build for CONFIG_ACPI=n

v7: tiny adjustment of requested vs. supported SBCB callbacks handling (Paulo)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The comments were a little out-of-sequence with the code, forcing the
reader to jump around whilst reading. Whilst moving the comments around,
add one to explain the context reference.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We use the request to ensure we hold a reference to the context for the
duration that it remains in use by the ring. Each request only holds a
reference to the current context, hence we emit a request after
switching contexts with the final reference to the old context. However,
the extra interrupt caused by that request is not useful (no timing
critical function will wait for the context object), instead the overhead
of servicing the IRQ shows up in some (lightweight) benchmarks. In order
to keep the useful property of using the request to manage the context
lifetime, we want to add a dummy request that is associated with the
interrupt from the subsequent real request following the batch.

The extra interrupt was added as a side-effect of using
i915_add_request() in

commit 112522f6
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu May 2 16:48:07 2013 +0300

    drm/i915: put context upon switching

v2: Daniel convinced me that the request here was solely for context
lifetime tracking and that we have the active ref to keep the object
alive whilst the MI_SET_CONTEXT. So the only concern then is which
context should get the blame for MI_SET_CONTEXT failing. The old scheme
added a request for the old context so that any hang upto and including
the switch away would mark the old context as guilty. Now any hang here
implicates the new context. However since we have already gone through a
complete flush with the last context in its last request, and all that
lies in no-man's-land is an invalidate flush and the MI_SET_CONTEXT, we
should be safe in not unduly placing blame on the new context.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The saga around the breadcrumb vmas used by execbuf continues ...

This time around we've managed to unconditionally move the object to
the unbound list on the last vma unbind even though it might never
have been on either the bound or unbound list. Hilarity ensued.

Chris Wilson tracked this one down but compared to his patches I've
simply opted to completely separate the unbound case for not-yet bound
vmas. Otherwise we imo end up with semantically hard to parse checks
around the list_move_tail(global_list, ...).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68462Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>