Currently on a guest exception the guest's k0 register is saved to the
scratch temp register and the guest k1 saved to the exception base
address + 0x3000 using k0 to extract the Exception Base field of the
EBase register and as the base operand to the store. Both are then
copied into the VCPU structure after the other general purpose registers
have been saved there.

This bouncing to exception base + 0x3000 is not actually necessary as
the VCPU pointer can be determined and written through just as easily
with only a single spare register. The VCPU pointer is already needed in
k1 for saving the other GP registers, so lets save the guest k0 register
straight into the VCPU structure through k1, first saving k1 into the
scratch temp register instead of k0.

This could potentially pave the way for having a single exception base
area for use by all guests.

The ehb after saving the k register to the scratch temp register is also
delayed until just before it needs to be read back.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use a relative branch to get from the individual exception vectors to
the common guest exit handler, rather than loading the address of the
exit handler and jumping to it.

This is made easier due to the fact we are now generating the entry code
dynamically. This will also allow the exception code to be further
reduced in future patches.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Scratch cop0 registers are needed by KVM to be able to save/restore all
the GPRs, including k0/k1, and for storing the VCPU pointer. However no
registers are universally suitable for these purposes, so the decision
should be made at runtime.

Until now, we've used DDATA_LO to store the VCPU pointer, and ErrorEPC
as a temporary. It could be argued that this is abuse of those
registers, and DDATA_LO is known not to be usable on certain
implementations (Cavium Octeon). If KScratch registers are present, use
them instead.

We save & restore the temporary register in addition to the VCPU pointer
register when using a KScratch register for it, as it may be used for
normal host TLB handling too.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On return from the exit handler to the host (without re-entering the
guest) we restore the saved value of the DDATA_LO register which we use
as a scratch register. However we've already restored it ready for
calling the exit handler so there is no need to do it again, so drop
that code.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Check for presence of MSA at uasm assembly time rather than at runtime
in the generated KVM host entry code. This optimises the guest exit path
by eliminating the MSA code entirely if not present, and eliminating the
read of Config3.MSAP and conditional branch if MSA is present.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The FPU handling code on entry from guest is unnecessary if no FPU is
present, so allow it to be dropped at uasm assembly time.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that locore.S is converted to uasm, remove a bunch of the assembly
offset definitions created by asm-offsets.c, including the CPUINFO_ ones
for reading the variable asid mask, and the non FPU/MSA related VCPU_
definitions. KVM's fpu.S and msa.S still use the remaining definitions.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Dump the generated entry code with pr_debug(), similar to how it is done
in tlbex.c, so it can be more easily debugged.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Convert the whole of locore.S (assembly to enter guest and handle
exception entry) to be generated dynamically with uasm. This is done
with minimal changes to the resulting code.

The main changes are:
- Some constants are generated by uasm using LUI+ADDIU instead of
  LUI+ORI.
- Loading of lo and hi are swapped around in vcpu_run but not when
  resuming the guest after an exit. Both bits of logic are now generated
  by the same code.
- Register MOVEs in uasm use different ADDU operand ordering to GNU as,
  putting zero register into rs instead of rt.
- The JALR.HB to call the C exit handler is switched to JALR, since the
  hazard barrier would appear to be unnecessary.

This will allow further optimisation in the future to dynamically handle
the capabilities of the CPU.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the R6 MUL instruction encoding for 3 operand signed multiply to
uasm so that KVM can use uasm for generating its entry point code at
runtime on R6.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add MTHI/MTLO instructions for writing to the hi & lo registers to uasm
so that KVM can use uasm for generating its entry point code at runtime.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add DI instruction for disabling interrupts to uasm so that KVM can use
uasm for generating its entry point code at runtime.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add CFCMSA/CTCMSA instructions for accessing MSA control registers to
uasm so that KVM can use uasm for generating its entry point code at
runtime.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add CFC1/CTC1 instructions for accessing FP control registers to uasm so
that KVM can use uasm for generating its entry point code at runtime.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix for kvm/next (4.8) part 3

This contains a fix for PER ifetch events. As we now have a handler
for a problem state instruction (sthyi) that could be stepped with a
debugger we should try to do the right thing regarding PER in our
instruction handlers.  With this fix the handling for intercepted
instructions is fixed in general, thus fixing other oddball cases as
well (e.g. kprobes single stepping)

Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The vGPU folks would like to trap the first access to a BAR by setting
vm_ops on the VMAs produced by mmap-ing a VFIO device.  The fault handler
then can use remap_pfn_range to place some non-reserved pages in the VMA.

This kind of VM_PFNMAP mapping is not handled by KVM, but follow_pfn
and fixup_user_fault together help supporting it.  The patch also supports
VM_MIXEDMAP vmas where the pfns are not reserved and thus subject to
reference counting.

Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Tested-by: NNeo Jia <cjia@nvidia.com>
Reported-by: NKirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Handle VM_IO like VM_PFNMAP, as is common in the rest of Linux; extract
the formula to convert hva->pfn into a new function, which will soon
gain more capabilities.

Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In case we have to emuluate an instruction or part of it (instruction,
partial instruction, operation exception), we have to inject a PER
instruction-fetching event for that instruction, if hardware told us to do
so.

In case we retry an instruction, we must not inject the PER event.

Please note that we don't filter the events properly yet, so guest
debugging will be visible for the guest.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

INFO: rcu_sched detected stalls on CPUs/tasks:
 1-...: (11800 GPs behind) idle=45d/140000000000000/0 softirq=0/0 fqs=21663
 (detected by 0, t=65016 jiffies, g=11500, c=11499, q=719)
Task dump for CPU 1:
qemu-system-x86 R  running task        0  3529   3525 0x00080808
 ffff8802021791a0 ffff880212895040 0000000000000001 00007f1c2c00db40
 ffff8801dd20fcd3 ffffc90002b98000 ffff8801dd20fc88 ffff8801dd20fcf8
 0000000000000286 ffff8801dd2ac538 ffff8801dd20fcc0 ffffffffc06949c9
Call Trace:
? kvm_write_guest_cached+0xb9/0x160 [kvm]
? __delay+0xf/0x20
? wait_lapic_expire+0x14a/0x200 [kvm]
? kvm_arch_vcpu_ioctl_run+0xcbe/0x1b00 [kvm]
? kvm_arch_vcpu_ioctl_run+0xe34/0x1b00 [kvm]
? kvm_vcpu_ioctl+0x2d3/0x7c0 [kvm]
? __fget+0x5/0x210
? do_vfs_ioctl+0x96/0x6a0
? __fget_light+0x2a/0x90
? SyS_ioctl+0x79/0x90
? do_syscall_64+0x7c/0x1e0
? entry_SYSCALL64_slow_path+0x25/0x25

This can be reproduced readily by running a full dynticks guest(since hrtimer
in guest is heavily used) w/ lapic_timer_advance disabled.

If fail to program hardware preemption timer, we will fallback to hrtimer based
method, however, a previous programmed preemption timer miss to cancel in this
scenario which results in one hardware preemption timer and one hrtimer emulated
tsc deadline timer run simultaneously. So sometimes the target guest deadline
tsc is earlier than guest tsc, which leads to the computation in vmx_set_hv_timer
can underflow and cause delta_tsc to be set a huge value, then host soft lockup
as above.

This patch fix it by cancelling the previous programmed preemption timer if there
is once we failed to program the new preemption timer and fallback to hrtimer
based method.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce cancel_hv_tscdeadline() to encapsulate preemption
timer cancel stuff.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the TSC deadline timer is programmed really close to the deadline or
even in the past, the computation in vmx_set_hv_timer can underflow and
cause delta_tsc to be set to a huge value.  This generally results
in vmx_set_hv_timer returning -ERANGE, but we can fix it by limiting
delta_tsc to be positive or zero.
Reported-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This gains a few clock cycles per vmexit.  On Intel there is no need
anymore to enable the interrupts in vmx_handle_external_intr, since
we are using the "acknowledge interrupt on exit" feature.  AMD
needs to do that, and must be careful to avoid the interrupt shadow.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is necessary to simplify handle_external_intr in the next patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the functions from context_tracking.h directly.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Make kvm_guest_{enter,exit} and __kvm_guest_{enter,exit} trivial wrappers
around the code in context_tracking.h.  Name the context_tracking.h functions
consistently with what those for kernel<->user switch.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Combine the kvm_enter, kvm_reenter and kvm_out trace events into a
single kvm_transition event class to reduce duplication and bloat.
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Fixes: 93258604 ("MIPS: KVM: Add guest mode switch trace events")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM reads the current boottime value as a struct timespec in order to
calculate the guest wallclock time, resulting in an overflow in 2038
on 32-bit systems.

The data then gets passed as an unsigned 32-bit number to the guest,
and that in turn overflows in 2106.

We cannot do much about the second overflow, which affects both 32-bit
and 64-bit hosts, but we can ensure that they both behave the same
way and don't overflow until 2106, by using getboottime64() to read
a timespec64 value.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On Intel platforms, this patch adds LMCE to KVM MCE supported
capabilities and handles guest access to LMCE related MSRs.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
[Haozhong: macro KVM_MCE_CAP_SUPPORTED => variable kvm_mce_cap_supported
           Only enable LMCE on Intel platform
           Check MSR_IA32_FEATURE_CONTROL when handling guest
             access to MSR_IA32_MCG_EXT_CTL]
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM currently does not check the value written to guest
MSR_IA32_FEATURE_CONTROL, though bits corresponding to disabled features
may be set. This patch makes KVM to validate individual bits written to
guest MSR_IA32_FEATURE_CONTROL according to enabled features.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

msr_ia32_feature_control will be used for LMCE and not depend only on
nested anymore, so move it from struct nested_vmx to struct vcpu_vmx.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: vSIE (nested virtualization) feature for 4.8 (kvm/next)

With an updated QEMU this allows to create nested KVM guests
(KVM under KVM) on s390.

s390 memory management changes from Martin Schwidefsky or
acked by Martin. One common code memory management change (pageref)
acked by Andrew Morton.

The feature has to be enabled with the nested medule parameter.

Let's be careful first and allow nested virtualization only if enabled
by the system administrator. In addition, user space still has to
explicitly enable it via SCLP features for it to work.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have certain SIE features that we cannot support for now.
Let's add these features, so user space can directly prepare to enable
them, so we don't have to update yet another component.

In addition, add a comment block, telling why it is for now not possible to
forward/enable these features.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Guest 2 sets up the epoch of guest 3 from his point of view. Therefore,
we have to add the guest 2 epoch to the guest 3 epoch. We also have to take
care of guest 2 epoch changes on STP syncs. This will work just fine by
also updating the guest 3 epoch when a vsie_block has been set for a VCPU.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Whenever a SIGP external call is injected via the SIGP external call
interpretation facility, the VCPU is not kicked. When a VCPU is currently
in the VSIE, the external call might not be processed immediately.

Therefore we have to provoke partial execution exceptions, which leads to a
kick of the VCPU and therefore also kick out of VSIE. This is done by
simulating the WAIT state. This bit has no other side effects.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As we want to make use of CPUSTAT_WAIT also when a VCPU is not idle but
to force interception of external calls, let's check in the bitmap instead.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Whenever we want to wake up a VCPU (e.g. when injecting an IRQ), we
have to kick it out of vsie, so the request will be handled faster.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can avoid one unneeded SIE entry after we reported a fault to g2.
Theoretically, g2 resolves the fault and we can create the shadow mapping
directly, instead of failing again when entering the SIE.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily enable ibs for guest 2, so he can use it for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>