- 24 3月, 2011 5 次提交
-
-
由 Lydia Wang 提交于
Add some hardware related verbs in VT2002P initial verbs. These verbs are used to fix Class-D speaker no sound issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Add a verb to enable control amplifier of stereo mixer in VT1718S initial verbs. Set stereo mixer default amplifier value as un-mute. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Add a verb of power down jack detect in VT1708 initial verbs. This verb is used to avoid noise caused by hardware issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Add VT1802 check in via_speaker_automute() function. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify side_mute_channel() and update_side_mute_status() functions to fix invalid side channel mute issue of VT2002P, VT1812 and VT1802 codecs. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 3月, 2011 3 次提交
-
-
由 Lydia Wang 提交于
Add support for VT1802 codec, which is similiar with VT2002P except VT1802 has no Class-D and has some different pin widget id. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Add support for VT1705 codec, which is similiar with VT1708S except it has 6 channels output. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Use set_widgets_power_state() function to seperately control different codecs' power management actions and to replace the original large function. Also fix some wrong widgets power up sequence which caused no sound issue under Smart5.1 mode and Independent HP mode. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2011 7 次提交
-
-
由 Lydia Wang 提交于
Since VT1708 didn't support the control of getting connection number, building of headphone control will fail in via_hp_build() function. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Correct stream names of analog playback and capture streams for VT1818S. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Add get_codec_type() in via_new_spec() function to make sure getting correct codec type before building mixer controls. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify vt_auto_create_analog_input_ctls() function to fix invalid a-a path volume adjust issue for VT1708S, VT1702 and VT1716S codecs. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify mute_aa_path() function to support VT1718S codec. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify via_independent_hp_put() function to support VT1718S and VT1812 codecs, and fix independent headphone no sound issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify function via_mux_enum_put() to fix stereo mixer recording no sound issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 2月, 2011 1 次提交
-
-
由 David Henningsson 提交于
This typo caused some microphone inputs not to be correctly initialized on VIA codecs. Reported-By: NMark Goldstein <goldstein.mark@gmail.com> Cc: stable@kernel.org Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 1月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 12月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 9月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
This patch improves the input-source label strings to be generated from the pin information instead of fixed strings per AUTO_PIN_* type. This gives more suitable labels, especially for mic and line-in pins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We can assign multiple pins to a single role now, let's reduce the redundant FRONT_MIC and FRONT_LINE. Also, autocfg->input_pins[] is no longer used, so this is removed as well. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Keep char array in the input_mux item itself instead of pointing to an external string. This is a preliminary work for improving the input-mux name based on the pin role. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 8月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
patch_via.c has redundant codes for parsing the input-pins. Although they are pretty similar, but all implemented in different functions just because of hard-coded ids and slight incompatibilities. This patch refactors the codes to use the common helper function, resulting in the reduction of many lines. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 7月, 2010 1 次提交
-
-
由 Clemens Ladisch 提交于
Correctly configure bidirectional pins when resuming; do not power down widgets when they are needed for Smart5.1 output; and on 3-jack boards, create the streams and controls needed for six channels. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: NViliam Kubis <viliam.kubis@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Some VIA codecs have no multiple source selection for headphone pins, thus it's useless (and wrong) to create "Independent HP" control on them. This patch adds the check of connections to skip the control in such a case. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The commit 5b0cb1d8 ALSA: hda - add more NID->Control mapping breaks the control element allocation by returning a wrong value. Let's fix it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 12月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Fix the wrong implementation of NID <-> kctl mapping for capture mixers introduced by the ocmmit 5b0cb1d8. So far, the driver returns an error at probe. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 12月, 2009 3 次提交
-
-
由 Jaroslav Kysela 提交于
The HDA_SUBDEV_NID_FLAG is duplicate for amplifier control elements. Move get_amp_nid_() call to the snd_hda_ctl_add() function. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
The purpose of this changeset is to show information about amplifier setting in the codec proc file. Something like: Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
This set of changes add missing NID values to some static control elemenents. Also, it handles all "Capture Source" or "Input Source" controls. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 18 11月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 11月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Define a proper const for a magic 31bit flag for subdev / NID setup with a brief comment. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
This patch adds support for dynamically created controls to proc codec file (Control: lines). Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 11月, 2009 1 次提交
-
-
sound/pci/hda/patch_via.c: In function 'via_hp_bind_automute': sound/pci/hda/patch_via.c:2074: internal compiler error: in do_SUBST, at combine.c:462 Please submit a full bug report, with preprocessed source if appropriate. See <URL:http://gcc.gnu.org/bugs.html> for instructions. [added a comment by tiwai] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 10月, 2009 1 次提交
-
-
由 Lydia Wang 提交于
Add support for VT1818S codec, which is similiar with VT1708S. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 10月, 2009 1 次提交
-
-
由 Logan Li 提交于
48 kHz limit is for slightly better stability, and sample rates other than 48k (like 96k/192k) are for better sound quality. We choose better quality, so remove the 48k limit. Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 10月, 2009 2 次提交
-
-
由 Stephen Rothwell 提交于
Fixes: sound/pci/hda/patch_via.c: In function 'patch_vt1718S': sound/pci/hda/patch_via.c:4951: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt1716S': sound/pci/hda/patch_via.c:5441: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt2002P': sound/pci/hda/patch_via.c:5794: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt1812': sound/pci/hda/patch_via.c:6148: error: expected expression before 'return' Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 10月, 2009 2 次提交
-
-
由 Lydia Wang 提交于
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
According to customer request, hp should be default to redirected mode, i.e. PW4 connect select default to to MW0. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NLogan Li <loganli@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-