- 29 10月, 2008 1 次提交
-
-
由 Trond Myklebust 提交于
We need to make sure that we don't remove creds from the cred_unused list if they are still under the moratorium, or else they will never get garbage collected. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
Some code here depends on CONFIG_KMOD to not try to load protocol modules or similar, replace by CONFIG_MODULES where more than just request_module depends on CONFIG_KMOD and and also use try_then_request_module in ebtables. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2008 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 3月, 2008 6 次提交
-
-
由 Trond Myklebust 提交于
The NFSv4 protocol allows clients to negotiate security protocols on the fly in the case where an administrator on the server changes the export settings and/or in the case where we may have a filesystem migration event. Instead of having the NFS client code cache credentials that are tied to a particular AUTH method it is therefore preferable to have a generic credential that can be converted into whatever AUTH is in use by the RPC client when the read/write/sillyrename/... is put on the wire. We do this by means of the new "generic" credential, which basically just caches the minimal information that is needed to look up an RPCSEC_GSS, AUTH_SYS, or AUTH_NULL credential. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need the ability to treat 'generic' creds specially, since they want to bind instances of the auth cred instead of binding themselves. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add an rpc credential that is not tied to any particular auth mechanism, but that can be cached by NFS, and later used to look up a cred for whichever auth mechanism that turns out to be valid when the RPC call is being made. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS authentication, and then only as a special case in the code. This patch removes the auth_sys special casing, and replaces it with generic code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The hash bucket is for some reason always being set to zero. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 1月, 2008 3 次提交
-
-
由 Trond Myklebust 提交于
To ensure that the RPCSEC_GSS upcall is performed with the correct sigmask. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The sunrpc client exports are not meant to be part of any official kernel API: they can change at the drop of a hat. Mark them as internal functions using EXPORT_SYMBOL_GPL. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Do this for all RPC client related functions and XDR functions. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 7月, 2007 1 次提交
-
-
由 J. Bruce Fields 提交于
Since every invocation of xdr encode or decode functions takes the BKL now, there's a lot of redundant lock_kernel/unlock_kernel pairs that we can pull out into a common function. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 7月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
I can never remember what the function to register to receive VM pressure is called. I have to trace down from __alloc_pages() to find it. It's called "set_shrinker()", and it needs Your Help. 1) Don't hide struct shrinker. It contains no magic. 2) Don't allocate "struct shrinker". It's not helpful. 3) Call them "register_shrinker" and "unregister_shrinker". 4) Call the function "shrink" not "shrinker". 5) Reduce the 17 lines of waffly comments to 13, but document it properly. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: David Chinner <dgc@sgi.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2007 12 次提交
-
-
由 J. Bruce Fields 提交于
We don't need the BKL when wrapping and unwrapping; and experiments by Avishay Traeger have found that permitting multiple encryption and decryption operations to proceed in parallel can provide significant performance improvements. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Cc: Avishay Traeger <atraeger@cs.sunysb.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We should almost always be deferencing the rpc_auth struct by means of the credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up that historical mistake, and remove the macro that propagated it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Convert to the use of atomic bitops... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add a helper rpc_cred_init() Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Also do the same for gss_api operation tables. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
See the FIXME: auth_flavors[] really needs a lock and module refcounting. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The leak only affects the RPCSEC_GSS caches, since they are the only ones that are dynamically allocated... Rename the existing rpcauth_free_credcache() to rpcauth_clear_credcache() in order to better describe its role, then add a new function rpcauth_destroy_credcache() that actually frees the cache in addition to clearing it out. Also move the call to destroy the credcache in gss_destroy() to come before the rpc upcall pipe is unlinked. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2007 1 次提交
-
-
由 Chuck Lever 提交于
The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Also clean up some miscellaneous print formatting nits. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 9月, 2006 1 次提交
-
-
由 Alexey Dobriyan 提交于
pure s/u32/__be32/ [AV: large part based on Alexey's patches] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2006 1 次提交
-
-
由 Olaf Kirch 提交于
This patch adds a request_module call to rpcauth_create which will try to auto-load the kernel module for the requested authentication flavor. For kernels with modular sunrpc, this reduces the admin overhead for the user. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 2月, 2006 2 次提交
-
-
由 Trond Myklebust 提交于
This fixes a bug whereby if two processes try to look up the same auth_gss credential, they may end up creating two creds, and triggering two upcalls because the upcall is performed before the credential is added to the credcache. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When we look up a new cred in the auth_gss downcall so that we can stuff the credcache, we do not want that lookup to queue up an upcall in order to initialise it. To do an upcall here not only redundant, but since we are already holding the inode->i_mutex, it will trigger a lock recursion. This patch allows rpcauth cache searches to indicate that they can cope with uninitialised credentials. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 1月, 2006 1 次提交
-
-
由 Kris Katterjohn 提交于
This removes more unneeded casts on the return value for kmalloc(), sock_kmalloc(), and vmalloc(). Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2005 1 次提交
-
-
由 Chuck Lever 提交于
Fix some dprintk's so that NLM, NFS client, and RPC client compile cleanly if CONFIG_SYSCTL is disabled. Test plan: Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 9月, 2005 1 次提交
-
-
由 Chuck Lever 提交于
Clean-up: get rid of unnecessary socket.h and in.h includes in the generic parts of the RPC client. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:06:23 -0400 Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 6月, 2005 1 次提交
-
-
由 J. Bruce Fields 提交于
Currently we return -ENOMEM for every single failure to create a new auth. This is actually accurate for auth_null and auth_unix, but for auth_gss it's a bit confusing. Allow rpcauth_create (and the ->create methods) to return errors. With this patch, the user may sometimes see an EINVAL instead. Whee. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-