- 03 8月, 2011 6 次提交
-
-
由 Huang Ying 提交于
memory_failure() is the entry point for HWPoison memory error recovery. It must be called in process context. But commonly hardware memory errors are notified via MCE or NMI, so some delayed execution mechanism must be used. In MCE handler, a work queue + ring buffer mechanism is used. In addition to MCE, now APEI (ACPI Platform Error Interface) GHES (Generic Hardware Error Source) can be used to report memory errors too. To add support to APEI GHES memory recovery, a mechanism similar to that of MCE is implemented. memory_failure_queue() is the new entry point that can be called in IRQ context. The next step is to make MCE handler uses this interface too. Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
printk is used by GHES to report hardware errors. Ratelimit is enforced on the printk to avoid too many hardware error reports in kernel log. Because there may be thousands or even millions of corrected hardware errors during system running. Currently, a simple scheme is used. That is, the total number of hardware error reporting is ratelimited. This may cause some issues in practice. For example, there are two kinds of hardware errors occurred in system. One is corrected memory error, because the fault memory address is accessed frequently, there may be hundreds error report per-second. The other is corrected PCIe AER error, it will be reported once per-second. Because they share one ratelimit control structure, it is highly possible that only memory error is reported. To avoid the above issue, an error record content based throttle algorithm is implemented in the patch. Where after the first successful reporting, all error records that are same are throttled for some time, to let other kinds of error records have the opportunity to be reported. In above example, the memory errors will be throttled for some time, after being printked. Then the PCIe AER error will be printked successfully. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
Some APEI GHES recoverable errors are reported via NMI, but printk is not safe in NMI context. To solve the issue, a lock-less memory allocator is used to allocate memory in NMI handler, save the error record into the allocated memory, put the error record into a lock-less list. On the other hand, an irq_work is used to delay the operation from NMI context to IRQ context. The irq_work IRQ handler will remove nodes from lock-less list, printk the error record and do some further processing include recovery operation, then free the memory. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
This version of the gen_pool memory allocator supports lockless operation. This makes it safe to use in NMI handlers and other special unblockable contexts that could otherwise deadlock on locks. This is implemented by using atomic operations and retries on any conflicts. The disadvantage is that there may be livelocks in extreme cases. For better scalability, one gen_pool allocator can be used for each CPU. The lockless operation only works if there is enough memory available. If new memory is added to the pool a lock has to be still taken. So any user relying on locklessness has to ensure that sufficient memory is preallocated. The basic atomic operation of this allocator is cmpxchg on long. On architectures that don't have NMI-safe cmpxchg implementation, the allocator can NOT be used in NMI handler. So code uses the allocator in NMI handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
Cmpxchg is used to implement adding new entry to the list, deleting all entries from the list, deleting first entry of the list and some other operations. Because this is a single list, so the tail can not be accessed in O(1). If there are multiple producers and multiple consumers, llist_add can be used in producers and llist_del_all can be used in consumers. They can work simultaneously without lock. But llist_del_first can not be used here. Because llist_del_first depends on list->first->next does not changed if list->first is not changed during its operation, but llist_del_first, llist_add, llist_add (or llist_del_all, llist_add, llist_add) sequence in another consumer may violate that. If there are multiple producers and one consumer, llist_add can be used in producers and llist_del_all or llist_del_first can be used in the consumer. This can be summarized as follow: | add | del_first | del_all add | - | - | - del_first | | L | L del_all | | | - Where "-" stands for no lock is needed, while "L" stands for lock is needed. The list entries deleted via llist_del_all can be traversed with traversing function such as llist_for_each etc. But the list entries can not be traversed safely before deleted from the list. The order of deleted entries is from the newest to the oldest added one. If you want to traverse from the oldest to the newest, you must reverse the order by yourself before traversing. The basic atomic operation of this list is cmpxchg on long. On architectures that don't have NMI-safe cmpxchg implementation, the list can NOT be used in NMI handler. So code uses the list in NMI handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
cmpxchg() is widely used by lockless code, including NMI-safe lockless code. But on some architectures, the cmpxchg() implementation is not NMI-safe, on these architectures the lockless code may need a spin_trylock_irqsave() based implementation. This patch adds a Kconfig option: ARCH_HAVE_NMI_SAFE_CMPXCHG, so that NMI-safe lockless code can depend on it or provide different implementation according to it. On many architectures, cmpxchg is only NMI-safe for several specific operand sizes. So, ARCH_HAVE_NMI_SAFE_CMPXCHG define in this patch only guarantees cmpxchg is NMI-safe for sizeof(unsigned long). Signed-off-by: NHuang Ying <ying.huang@intel.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NRichard Henderson <rth@twiddle.net> CC: Mikael Starvik <starvik@axis.com> Acked-by: NDavid Howells <dhowells@redhat.com> CC: Yoshinori Sato <ysato@users.sourceforge.jp> CC: Tony Luck <tony.luck@intel.com> CC: Hirokazu Takata <takata@linux-m32r.org> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Michal Simek <monstr@monstr.eu> Acked-by: NRalf Baechle <ralf@linux-mips.org> CC: Kyle McMartin <kyle@mcmartin.ca> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Chen Liqin <liqin.chen@sunplusct.com> CC: "David S. Miller" <davem@davemloft.net> CC: Ingo Molnar <mingo@redhat.com> CC: Chris Zankel <chris@zankel.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 14 7月, 2011 10 次提交
-
-
由 Huang Ying 提交于
APEI firmware first mode must be turned on explicitly on some machines, otherwise there may be no GHES hardware error record for hardware error notification. APEI bit in generic _OSC call can be used to do that, but on some machine, a special WHEA _OSC call must be used. This patch adds the support to that WHEA _OSC call. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
In APEI firmware first mode, hardware error is reported by hardware to firmware firstly, then firmware reports the error to Linux in a GHES error record via POLL/SCI/IRQ/NMI etc. This may result in some issues if OS has no full APEI support. So some firmware implementation will work in a back-compatible mode by default. Where firmware will only notify OS in old-fashion, without GHES record. For example, for a fatal hardware error, only NMI is signaled, no GHES record. To gain full APEI power on these machines, APEI bit in generic _OSC call can be specified to tell firmware that Linux has full APEI support. This patch adds the APEI bit support in generic _OSC call. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
Some machine may have broken firmware so that GHES and firmware first mode should be disabled. This patch adds support to that. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
GHES (Generic Hardware Error Source) is used to process hardware error notification in firmware first mode. But because firmware first mode can be turned on but can not be turned off, it is unreasonable to unload the GHES module with firmware first mode turned on. To avoid confusion, this patch makes GHES can be enabled/disabled in configuration time, but not built as module and unloaded at run time. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
This patch changes APEI EINJ and ERST to use apei_exec_run for mandatory actions, and apei_exec_run_optional for optional actions. Cc: Thomas Renninger <trenn@novell.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
Some actions in APEI ERST and EINJ tables are optional, for example, ACPI_EINJ_BEGIN_OPERATION action is used to do some preparation for error injection, and firmware may choose to do nothing here. While some other actions are mandatory, for example, firmware must provide ACPI_EINJ_GET_ERROR_TYPE implementation. Original implementation treats all actions as optional (that is, can have no instructions), that may cause issue if firmware does not provide some mandatory actions. To fix this, this patch adds apei_exec_run_optional, which should be used for optional actions. The original apei_exec_run should be used for mandatory actions. Cc: Thomas Renninger <trenn@novell.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
printk is used by GHES to report hardware errors. Normally, the printk will be ratelimited to avoid too many hardware error reports in kernel log. Because there may be thousands or even millions of corrected hardware errors during system running. That is different for fatal hardware error, because system will go panic as soon as possible, there will be no more than several error records. And these error records are valuable for system fault diagnosis, so they should not be ratelimited. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Chen Gong 提交于
When we debug ERST table with erst-dbg, if the error record in ERST table is too long(>4K), it can't be read out. So this patch increases the buffer size to 16K to ensure such error records can be read from ERST table. Signed-off-by: NChen Gong <gong.chen@linux.intel.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
erst_dbg module can not work when ERST is disabled. So disable module loading to provide clearer information to user. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
The firmware on some machine will report duplicated hardware error source ID in HEST. This is considered a firmware bug. To provide better warning message, this patch adds duplicated hardware error source ID detecting and corresponding printk. This patch fixes #37412 on kernel bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37412 Reported-by: marconifabio@ubuntu-it.org Signed-off-by: NHuang Ying <ying.huang@intel.com> Tested-by: NMathias <janedo.spam@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 7月, 2011 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mm: Fix memory_block_size_bytes() for non-pseries mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting ARM: pxa/raumfeld: fix device name for codec ak4104 ARM: pxa/raumfeld: display initialisation fixes ARM: pxa/raumfeld: adapt to upcoming hardware change ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd) arm: mach-vt8500: add forgotten irq_data conversion ARM: pxa168: correct nand pmu setting ARM: pxa910: correct nand pmu setting ARM: pxa: fix PGSR register address calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6由 Linus Torvalds 提交于
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915/ringbuffer: Idling requires waiting for the ring to be empty Revert "drm/i915: enable rc6 by default" drm/i915: Clean up i915_driver_load failure path drm/i915: Enable GPU reset on Ivybridge. drm/i915/dp: manage sink power state if possible drm/i915/dp: consolidate AUX retry code drm/i915/dp: remove DPMS mode tracking from DP drm/i915/dp: try to read receiver capabilities 3 times when detecting drm/i915/dp: read more receiver capability bits on hotplug drm/i915/dp: use DP DPCD defines when looking at DPCD values drm/i915/dp: retry link status read 3 times on failure
-
由 Chris Wilson 提交于
...which is measured by the size and not the amount of space remaining. Waiting upon size-8, did one of two things. In the common case with more than 8 bytes available to write into the ring, it would return immediately. Otherwise, it would timeout given the impossible condition of waiting for more space than is available in the ring, leading to warnings such as: [drm:intel_cleanup_ring_buffer] *ERROR* failed to quiesce render ring whilst cleaning up: -16 Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
- 12 7月, 2011 16 次提交
-
-
由 Keith Packard 提交于
This reverts commit a51f7a66. We still have a few Ironlake and Sandybridge machines which fail when RC6 is enabled. Better luck next release? Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Keith Packard 提交于
i915_driver_load adds a write-combining MTRR region for the GTT aperture to improve memory speeds through the aperture. If i915_driver_load fails after this, it would not have cleaned up the MTRR. This shouldn't cause any problems, except for consuming an MTRR register. Still, it's best to clean up completely in the failure path, which is easily done by calling mtrr_del if the mtrr was successfully allocated. i915_driver_load calls i915_gem_load which register i915_gem_inactive_shrink. If i915_driver_load fails after calling i915_gem_load, the shrinker will be left registered. When called, it will access freed memory and crash. The fix is to unregister the shrinker in the failure path using code duplicated from i915_driver_unload. i915_driver_load also has some incorrect gotos in the error cleanup paths: * After failing to initialize the GTT (which cannot happen, btw, intel_gtt_get returns a fixed (non-NULL) value), it tries to free the uninitialized WC IO mapping. Fixed this by changing the target from out_iomapfree to out_rmmap Signed-off-by: NKeith Packard <keithp@keithp.com> Tested-by: NLin Ming <ming.m.lin@intel.com>
-
由 Benjamin Herrenschmidt 提交于
Just compiling pseries in the kernel causes it to override memory_block_size_bytes() regardless of what is the runtime platform. This cleans up the implementation of that function, fixing a bug or two while at it, so that it's harmless (and potentially useful) for other platforms. Without this, bugs in that code would trigger a WARN_ON() in drivers/base/memory.c when booting some different platforms. If/when we have another platform supporting memory hotplug we might want to either move that out to a generic place or make it a ppc_md. callback. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c files, and I need it in a third one to fix a powerpc bug, so let's first move it into a header Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
That file harkens back to the days of the big 2.4 -> 2.6 version jump, and was based even then on older versions. Some of it is just obsolete, and Jesper Juhl points out that it talks about kernel versions 2.6 and should be updated to 3.0. Remove some obsolete text, and re-phrase some other to not be 2.6-specific. Reported-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] msp3400: fill in v4l2_tuner based on vt->type field [media] tuner-core.c: don't change type field in g_tuner or g_frequency [media] cx18/ivtv: fix g_tuner support [media] tuner-core: power up tuner when called with s_power(1) [media] v4l2-ioctl.c: check for valid tuner type in S_HW_FREQ_SEEK [media] tuner-core: simplify the standard fixup [media] tuner-core/v4l2-subdev: document that the type field has to be filled in [media] v4l2-subdev.h: remove unused s_mode tuner op [media] feature-removal-schedule: change in how radio device nodes are handled [media] bttv: fix s_tuner for radio [media] pvrusb2: fix g/s_tuner support [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner [media] tuner-core: fix tuner_resume: use t->mode instead of t->type [media] tuner-core: fix s_std and s_tuner
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Reintroduce dropped call to check_wakeup_irqs
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: drop spinlock before calling cifs_put_tlink cifs: fix expand_dfs_referral cifs: move bdi_setup_and_register outside of CONFIG_CIFS_DFS_UPCALL cifs: factor smb_vol allocation out of cifs_setup_volume_info cifs: have cifs_cleanup_volume_info not take a double pointer cifs: fix build_unc_path_to_root to account for a prefixpath cifs: remove bogus call to cifs_cleanup_volume_info
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] fix cpumask memory leak in acpi-cpufreq on cpu hotplug.
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: hp-wmi: fix use after free dell-laptop - using buffer without mutex_lock Revert: "dell-laptop: Toggle the unsupported hardware killswitch" platform-drivers-x86: set backlight type to BACKLIGHT_PLATFORM thinkpad-acpi: handle HKEY 0x4010, 0x4011 events drivers/platform/x86: Fix memory leak thinkpad-acpi: handle some new HKEY 0x60xx events acer-wmi: fix bitwise bug when set device state acer-wmi: Only update rfkill status for associated hotkey events
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'movieboard' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: do not bind to Pinnacle cards, avert panic
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Muthu Kumar 提交于
Since we removed sti()/cli() and related, how about removing it from Documentation/spinlocks.txt? Signed-off-by: NMuthukumar R <muthur@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Layton 提交于
...as that function can sleep. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 11 7月, 2011 4 次提交
-
-
由 Eric Dumazet 提交于
[ 191.310008] WARNING: kmemcheck: Caught 32-bit read from freed memory (f0d25f14) [ 191.310011] c056d2f088000000105fd2f00000000050415353040000000000000000000000 [ 191.310020] i i i i f f f f f f f f f f f f f f f f f f f f f f f f f f f f [ 191.310027] ^ [ 191.310029] [ 191.310032] Pid: 737, comm: modprobe Not tainted 3.0.0-rc5+ #268 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h [ 191.310036] EIP: 0060:[<f80b3104>] EFLAGS: 00010286 CPU: 0 [ 191.310039] EIP is at hp_wmi_perform_query+0x104/0x150 [hp_wmi] [ 191.310041] EAX: f0d25601 EBX: f0d25f00 ECX: 000121cf EDX: 000121ce [ 191.310043] ESI: f0d25f10 EDI: f0f97ea8 EBP: f0f97ec4 ESP: c173f34c [ 191.310045] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 191.310046] CR0: 8005003b CR2: f540c000 CR3: 30f30000 CR4: 000006d0 [ 191.310048] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 191.310050] DR6: ffff4ff0 DR7: 00000400 [ 191.310051] [<f80b317b>] hp_wmi_dock_state+0x2b/0x40 [hp_wmi] [ 191.310054] [<f80b6093>] hp_wmi_init+0x93/0x1a8 [hp_wmi] [ 191.310057] [<c10011f0>] do_one_initcall+0x30/0x170 [ 191.310061] [<c107ab9f>] sys_init_module+0xef/0x1a60 [ 191.310064] [<c149f998>] sysenter_do_call+0x12/0x28 [ 191.310067] [<ffffffff>] 0xffffffff Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Jose Alonso 提交于
Using buffer->output[1] without mutex_lock() Signed-off-by: NJose Alonso <joalonsof@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Keng-Yu Lin 提交于
This reverts commit a3d77411, as it causes a mess in the wireless rfkill status on some models. It is probably a bad idea to toggle the rfkill for all dell models without the respect to the claim that it is hardware-controlled. Cc: stable@kernel.org Signed-off-by: NKeng-Yu Lin <kengyu@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Colin Cross 提交于
Patch 2e711c04 (PM: Remove sysdev suspend, resume and shutdown operations) deleted sysdev_suspend(), which was being relied on to call check_wakeup_irqs() in suspend. If check_wakeup_irqs() is not called, wake interrupts that are pending when suspend is entered may be lost. It also breaks IRQCHIP_MASK_ON_SUSPEND, which is handled in check_wakeup_irqs(). This patch adds a call to check_wakeup_irqs() in syscore_suspend(), similar to what was deleted in sysdev_suspend(). Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-