- 30 10月, 2008 27 次提交
-
-
由 Christoph Hellwig 提交于
xfs_bmbt_newroot is a mostly generic implementation of moving from an inode root to a real block based root. So move it to xfs_btree.c where it can use all the nice infrastructure there and make it pointer size agnostic The new name for it is xfs_btree_new_iroot, following the old naming but making it clear we're dealing with the root in inode case here, and to avoid confusion with xfs_btree_new_root which is used for the not inode rooted case. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32201a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> Add a xfs_btree_new_root helper for the alloc and ialloc btrees. The bmap btree needs it's own version and is not converted. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32200a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Make the btree split code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32198a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Make the btree left shift code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32197a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Make the btree right shift code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32196a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> The most complicated part here is the lastrec tracking for the alloc btree. Most logic is in the update_lastrec method which has to do some hopefully good enough dirty magic to maintain it. [hch: split out from bigger patch and a rework of the lastrec logic] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32194a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> Note that there are many > 80 char lines introduced due to the xfs_btree_key casts. But the places where this happens is throw-away code once the whole btree code gets merged into a common implementation. The same is true for the temporary xfs_alloc_log_keys define to the new name. All old users will be gone after a few patches. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32193a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32192a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32191a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> Because this is the first major generic btree routine this patch includes some infrastrucure, first a few routines to deal with a btree block that can be either in short or long form, second xfs_btree_read_buf_block, which is the new central routine to read a btree block given a cursor, and third the new xfs_btree_ptr_addr routine to calculate the address for a given btree pointer record. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32190a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Add new helpers in xfs_btree.c to find the record, key and block pointer entries inside a btree block. To implement this genericly the ->get_maxrecs methods and two new xfs_btree_ops entries for the key and record sizes are used. Also add a big comment describing how the addressing inside a btree block works. Note that these helpers are unused until users are introduced in the next patches and this patch will thus cause some harmless compiler warnings. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32189a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Factor xfs_btree_maxrecs into a per-btree operation. The get_maxrecs method is based on a patch from Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32188a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Make the existing bmap btree tracing generic so that it applies to all btree types. Some fragments lifted from a patch by Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32187a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 David Chinner 提交于
From: Dave Chinner <dgc@sgi.com> Introduce statistics coverage of all the btrees and cover all the btree operations, not just some. Invaluable for determining test code coverage of all the btree operations.... SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32184a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com>
-
由 Christoph Hellwig 提交于
Move the various btree validation helpers around in xfs_btree.c so that they are close to each other and in common #ifdef DEBUG sections. Also add a new xfs_btree_check_ptr helper to check a btree ptr that can be either long or short form. Split out from a bigger patch from Dave Chinner with various small changes applied by me. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32183a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> Refactor xfs_btree_readahead to make it more readable: (a) remove the inline xfs_btree_readahead wrapper and move all checks out of line into the main routine. (b) factor out helpers for short/long form btrees (c) move check for root in inodes from the callers into xfs_btree_readahead [hch: split out from a big patch and minor cleanups] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32182a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Add a flag to the xfs btree cursor when using long (64bit) block pointers instead of checking btnum == XFS_BTNUM_BMAP. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32181a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
The bmap btree is rooted in the inode and not in a disk block. Make the support for this feature more generic by adding a btree flag to for this feature instead of relying on the XFS_BTNUM_BMAP btnum check. Also clean up xfs_btree_get_block where this new flag is used. Based upon a patch from Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32180a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Add generic union types for btree pointers, keys and records. The generic btree pointer contains either a 32 and 64bit big endian scalar for short and long form btrees, and the key and record contain the relevant type for each possible btree. Split out from a bigger patch from Dave Chinner and simplified a little further. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32178a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
xfs_btree_init_cursor contains close to little shared code for the different btrees and will get even more non-common code in the future. Split it up into one routine per btree type. Because xfs_btree_dup_cursor needs to call the init routine for a generic btree cursor add a new btree operation vector that contains a dup_cursor method that initializes a new cursor based on an existing one. The btree operations vector is based on an idea and code from Dave Chinner and will grow more entries later during this series. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32176a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
This type is only embedded in struct xfs_btree_block and never used directly. By moving the fields directly into struct xfs_btree_block a lot of the macros for struct xfs_btree_sblock and struct xfs_btree_lblock can be used for struct xfs_btree_block too now which helps greatly with some of the migrations during implementing the generic btree code. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32174a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Lachlan McIlroy 提交于
Lock debugging reported the ilock was being destroyed without being unlocked. We don't need to lock the inode until we are going to insert it into the radix tree. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32159a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 Lachlan McIlroy 提交于
Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NPeter Leckie <pleckie@sgi.com>
-
由 Barry Naujok 提交于
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:32002a Signed-off-by: NBarry Naujok <bnaujok@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Lachlan McIlroy 提交于
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31927a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Lachlan McIlroy 提交于
kmem cache constructor no longer takes a kmem_zone_t argument. SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:32254a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
To avoid having to initialise some fields of the XFS inode on every allocation, we can use the slab init-once feature to initialise them. All we have to guarantee is that when we free the inode, all it's entries are in the initial state. Add asserts where possible to ensure debug kernels check this initial state before freeing and after allocation. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31925a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
- 23 10月, 2008 2 次提交
-
-
由 David Woodhouse 提交于
Now that we've moved the readdir hack to the nfsd code, we can remove the local version from the XFS code. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Switch all users of d_alloc_anon to d_obtain_alias. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 10月, 2008 1 次提交
-
-
由 Al Viro 提交于
replace open_bdev_excl/close_bdev_excl with variants taking fmode_t. superblock gets the value used to mount it stored in sb->s_mode Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 10月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
When we skip unrecognized options in xfs_fs_remount we should just break out of the switch and not return because otherwise we may skip clearing the xfs-internal read-only flag. This will only show up on some operations like touch because most read-only checks are done by the VFS which thinks this filesystem is r/w. Eventually we should replace the XFS read-only flag with a helper that always checks the VFS flag to make sure they can never get out of sync. Bug reported and fix verified by Marcel Beister on #xfs. Bug fix verified by updated xfstests/189. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NTimothy Shimmin <tes@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2008 1 次提交
-
-
由 Steven Whitehouse 提交于
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently we disable barriers as soon as we get a buffer in xlog_iodone that has the XBF_ORDERED flag cleared. But this can be the case not only for buffers where the barrier failed, but also the first buffer of a split log write in case of a log wraparound. Due to the disabled barriers we can easily get directory corruption on unclean shutdowns. So instead of using this check add a new buffer flag for failed barrier writes. This is a regression vs 2.6.26 caused by patch to use the right macro to check for the ORDERED flag, as we previously got true returned for every buffer. Thanks to Toei Rei for reporting the bug. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 9月, 2008 2 次提交
-
-
由 Lachlan McIlroy 提交于
Yet another bug was found in xfs_iext_irec_compact_full() and while the source of the bug was found it wasn't an easy task to track it down because the conditions are very difficult to reproduce. A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their significant effort in tracking down the source of this corruption. xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost identical - they both compact indirect extent lists by moving extents from subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only moves extents if all of the extents in the next buffer will fit into the empty space in the buffer before it. xfs_iext_irec_compact_full() will go a step further and move part of the next buffer if all the extents wont fit. It will then shift the remaining extents in the next buffer up to the start of the buffer. The bug here was that we did not update er_extoff and this caused extent list corruption. It does not appear that this extra functionality gains us much. Calling xfs_iext_irec_compact_pages() instead will do a good enough job at compacting the indirect list and will be quicker too. For the case in xfs_iext_indirect_to_direct() the total number of extents in the indirect list will fit into one buffer so we will never need the extra functionality of xfs_iext_irec_compact_full() there. Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the buffers will never overlap) so we don't want the performance hit that can incur. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32166a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
-
由 Lachlan McIlroy 提交于
If we don't move all the records from the next buffer into the current buffer then we need to update the er_extoff field of the next buffer as we shift the remaining records to the start of the buffer. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32165a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NRussell Cattelan <cattelan@thebarn.com>
-
- 17 9月, 2008 5 次提交
-
-
由 Lachlan McIlroy 提交于
When unreserving space with boundaries that are not block aligned we round up the start and round down the end boundaries and then use this function, xfs_zero_remaining_bytes(), to zero the parts of the blocks that got dropped during the rounding. The problem is we don't consider if these blocks are beyond eof. Worse still is if we encounter delayed allocations beyond eof we will try to use the magic delayed allocation block number as a real block number. If the file size is ever extended to expose these blocks then we'll go through xfs_zero_eof() to zero them anyway. SGI-PV: 983683 SGI-Modid: xfs-linux-melb:xfs-kern:32055a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 Lachlan McIlroy 提交于
We have a use-after-free issue where log completions access buffers via the buffer log item and the buffer has already been freed. Fix this by taking a reference on the buffer when attaching the buffer log item and release the hold when the buffer log item is detached and we no longer need the buffer. Also create a new function xfs_buf_item_free() to combine some common code. SGI-PV: 985757 SGI-Modid: xfs-linux-melb:xfs-kern:32025a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
If we call xfs_lock_two_inodes() to grab both the iolock and the ilock, then drop the ilocks on both inodes, then grab them again (as xfs_swap_extents() does) then lockdep will report a locking order problem. This is a false positive. To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks at once - force calers to make two separate calls. This means that nested dropping and regaining of the ilocks will retain the same lockdep subclass and so lockdep will not see anything wrong with this code. SGI-PV: 986238 SGI-Modid: xfs-linux-melb:xfs-kern:31999a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NPeter Leckie <pleckie@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
The current code in xlog_iodone() uses the wrong macro to check if the barrier has been cleared due to an EOPNOTSUPP error form the lower layer. SGI-PV: 986143 SGI-Modid: xfs-linux-melb:xfs-kern:31984a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NNathaniel W. Turner <nate@houseofnate.net> Signed-off-by: NPeter Leckie <pleckie@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Lachlan McIlroy 提交于
With the help from some tracing I found that we try to map extents beyond eof when doing a direct I/O read. It appears that the way to inform the generic direct I/O path (ie do_direct_IO()) that we have breached eof is to return an unmapped buffer from xfs_get_blocks_direct(). This will cause do_direct_IO() to jump to the hole handling code where is will check for eof and then abort. This problem was found because a direct I/O read was trying to map beyond eof and was encountering delayed allocations. The delayed allocations beyond eof are speculative allocations and they didn't get converted when the direct I/O flushed the file because there was only enough space in the current AG to convert and write out the dirty pages within eof. Note that xfs_iomap_write_allocate() wont necessarily convert all the delayed allocation passed to it - it will return after allocating the first extent - so if the delayed allocation extends beyond eof then it will stay that way. SGI-PV: 983683 SGI-Modid: xfs-linux-melb:xfs-kern:31929a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-