process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms
and userptr valid/inval list, svm_range_restore_work and
svm_range_set_attr don't access those, so do not need to take
process_info lock. This will avoid potential circular locking issue.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With device_info initialization being handled in kfd_device_info_init,
these structs may be removed. Also add comments to help matching IP
versions to asic names.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initializes kfd->device_info given either asic_type (enum) if GFX
version is less than GFX9, or GC IP version if greater. Also takes in vf
and the target compiler gfx version. Uses SDMA version to determine
num_sdma_queues_per_engine.

Convert device_info to a non-pointer member of kfd, change references
accordingly.

Change unsupported asic condition to only probe f2g, move device_info
initialization post-switch.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

device_info->asic_name and amdgpu_asic_name[adev->asic_type] both
provide asic name strings, with the only difference being casing.
Remove asic_name from device_info and replace sysfs entry with lowercase
amdgpu_asic_name[]. Ensures string is null-terminated so that this
doesn't break if dev->node_props.name ever gets set anywhere else.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This change revert previous commits:
9f4f2c1a ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
271fd38c ("drm/amdgpu: move kfd post_reset out of reset_sriov function")

This change moves the amdgpu_amdkfd_pre_reset to an earlier place
in amdgpu_device_reset_sriov, presumably to address the sequence issue
that the first patch was originally meant to fix.

Some register access(GRBM_GFX_CNTL) only be allowed on full access
mode. Move kfd_pre_reset and  kfd_post_reset back inside reset_sriov
function.

Fixes: 9f4f2c1a ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
Fixes: 271fd38c ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
Signed-off-by: Nshaoyunl <shaoyun.liu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.

[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.

116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100

BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NPerry Yuan <Perry.Yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm_gem_object_put calls release_notify callback to free the mem
structure and unreserve_mem_limit, move it down after the last access
of mem and make it conditional call.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To silence the following Smatch static checker warning:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615
svm_range_restore_pages()
	warn: missing error code here? 'get_task_mm()' failed. 'r' = '0'
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Suggested-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following:
- FW promotion to 0.0.95
- DSC fixes for supported Docks
- Fixes eDP display issue
- Vendor LTTR workarounds
- Fixes Tiled display audio issue
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NBhawanpreet.Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Certain display configurations require an extra delay before
reading lane status with certain LTTPR.

[How]
Add temporary workaround to force AUX RD interval to
16ms for CR and EQ. Needs to be refactored later.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Allow changing DET size with debug flag for testing purposes
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Vendor specific link rate toggle workaround should not be
applied outside of link training scenario, such as when
outputting PHY test pattern.

[How]
Add flag to indicate when link training is occuring.
Make workaround a no-op when flag is not set.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Certain LTTPR require special workarounds in order to comply
with DP specifications.

[How]
Implement vendor specific sequences via DPCD writes to
vendor-specific LTTPR registers.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Adding a debugfs to show PSR capability of the panel and the driver.
To use:
  cat /sys/kernel/debug/dri/0/eDP-X/psr_capability
Expected output:
 Sink support: no/yes
 Driver support: no/yes

[how]
Adding psr_capability to eDP connectors.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Driver use primary eDP link stream as the condition
to enable fastboot or not.
In dual eDP case, set second screen only,
this would cause slave eDP timing to be used on primary one.

[HOW]
Add a check for unmatched eDP link stream.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NBrandon Syu <Brandon.Syu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.

[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[HOW&WHY]
Add function to be used for early eDP power on
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NEvgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.

[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NMustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.

[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NMustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Nmeenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
VS and PE requested by repeater should not persist for the sink.

[How]
Clear DPCD lane settings after repeater link training finishes.
Reviewed-by: NWesley Chalmers <wesley.chalmers@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Using the hdmi_disable option doesnt disable 6GB bandwidth

[How]
Add debug.hdmi20_disable flage when checking 6GB enable or not.
Reviewed-by: NChris Park <Chris.Park@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NDale Zhao <dale.zhao@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When trying to lightup two 4k60 non-DSC displays behind a branch device
that supports DSC we can't lightup both at once due to bandwidth
limitations - each requires 48 VCPI slots but we only have 63.

[How]
The workaround already exists in the code but is guarded by a CONFIG
that cannot be set by the user and shouldn't need to be.

Check for specific branch device IDs to device whether to enable
the workaround for multiple display scenarios.
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why + How]
Enable P010 for SDR video applications.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change since v1: add brief description
1. Add hdmi frl pcon support to existing asic family.
2. Determine pcon frl capability based on pcon dpcd.
3. pcon frl is taken into consideration into mode validation.

v2: squash in warning fix (Alex)
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Parse DSC caps from PCON DPCD
2. Policy determins if DSC is decoded at PCON
3. Enable/disable DSC at PCON
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On aldebaran, RLC also controls GFXCLK. Skip halting RLC during GFX IP suspend
and keep it running till PMFW disables all DPMs.

    [  578.019986] amdgpu 0000:23:00.0: amdgpu: GPU reset begin!
    [  583.245566] amdgpu 0000:23:00.0: amdgpu: Failed to disable smu features.
    [  583.245621] amdgpu 0000:23:00.0: amdgpu: Fail to disable dpm features!
    [  583.245639] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
    [  583.248504] [drm] free PSP TMR buffer
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

HW_ID_MAX considers HWID of all IPs, far more than what amdgpu uses.
amdgpu tracks only the IPs defined by amd_hw_ip_block_type whose max
is MAX_HWIP.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no base reg offset or ip_version set for SDMA2
and SDMA3 on SIENNA_CICHLID, so add them.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NKevin Wang <kevinyang.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

>> drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:503:6: warning: no previous prototype for function 'release_psp_cmd_buf' [-Wmissing-prototypes]
   void release_psp_cmd_buf(struct psp_context *psp)
        ^
   drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:503:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   void release_psp_cmd_buf(struct psp_context *psp)
   ^
   static
   1 warning generated.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NKevin Wang <kevinyang.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 After modifying navi10 in previous commit, extend the changes so all implementations of
 pp_hwmgr_func->get_power_profile_mode and pptable_funcs->get_power_profile_mode use
 amdgpu_pp_profile_name

 == Test ==
 LOGFILE=pp_profile_strings.test.log
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display"  > $LOGFILE
 FILES="pp_power_profile_mode "

 for f in $FILES
 do
   echo === $f === >> $LOGFILE
   cat $HWMON_DIR/device/$f >> $LOGFILE
 done
 cat $LOGFILE
Signed-off-by: NDarren Powell <darren.powell@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 == Description ==
 All the power profile modes use the same strings (or a subset of)
 Creating a public array of the strings will allow sharing rather than
 duplicating for each chip
 First patch only implements change for navi10, followup with other chips

 == Changes ==
 Create a declaration of the public array in kgd_pp_interface.h
 Define the public array in amdgpu_pm.c
 Modify the implementaiton of navi10_get_power_profile_mode to use new array

 == Test ==
 LOGFILE=pp_profile_strings.test.log
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display"  > $LOGFILE
 FILES="pp_power_profile_mode "

 for f in $FILES
 do
   echo === $f === >> $LOGFILE
   cat $HWMON_DIR/device/$f >> $LOGFILE
 done
 cat $LOGFILE
Signed-off-by: NDarren Powell <darren.powell@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

IH ring1 is used to process GPU retry fault, overflow is enabled to
drain retry fault because we want receive other interrupts while
handling retry fault to recover range. There is no overflow flag set
when wptr pass rptr. Use timestamp of rptr and wptr to handle overflow
and drain retry fault.

If fault timestamp goes backward, the fault is filtered and should not
be processed. Drain fault is finished if processed_timestamp is equal to
or larger than checkpoint timestamp.

Add amdgpu_ih_functions interface decode_iv_ts for different chips to
get timestamp from IV entry with different iv size and timestamp offset.
amdgpu_ih_decode_iv_ts_helper is used for vega10, vega20, navi10.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
    still need call ras_disable_all_featrures to handle
    ras initilization failure case.

Function amdgpu_device_fini_hw is called before amdgpu_device_fini_sw,
so ras ta will unload before send ras disable command, ras dsiable operation
must before hw fini.
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v1: Ideally power gate/ungate requests shouldn't come when smu block is
uninitialized. Add a WARN message to check the origins if such a thing
ever happens.

v2: Use dev_WARN to log device info (Felix/Guchun).
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NKevin Yang <kevinyang.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

since vkms support atomic KMS interface
Signed-off-by: NFlora Cui <flora.cui@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Acked-by: NAlex Deucher <aleander.deucher@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

otherwise adev->mode_info.crtcs[] is NULL
Signed-off-by: NFlora Cui <flora.cui@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <flora.cui@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The 'doorbell_bitmap' bitmap has just been allocated. So we can use the
non-atomic '__set_bit()' function to save a few cycles as no concurrent
access can happen.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

'doorbell_bitmap' and 'queue_slot_bitmap' are bitmaps. So use
'bitmap_zalloc()' to simplify code, improve the semantic and avoid some
open-coded arithmetic in allocator arguments.

Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>