Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 5月, 2019 10 次提交
  3. 18 5月, 2019 5 次提交
  5. 17 5月, 2019 3 次提交
    • A
      fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types · f8585539
      由 Ard Biesheuvel 提交于 
      The following commit:

  38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")

updated the EFI framebuffer code to use memory mappings for the linear
framebuffer that are permitted by the memory attributes described by the
EFI memory map for the particular region, if the framebuffer happens to
be covered by the EFI memory map (which is typically only the case for
framebuffers in shared memory). This is required since non-x86 systems
may require cacheable attributes for memory mappings that are shared
with other masters (such as GPUs), and this information cannot be
described by the Graphics Output Protocol (GOP) EFI protocol itself,
and so we rely on the EFI memory map for this.

As reported by James, this breaks some x86 systems:

  [ 1.173368] efifb: probing for efifb
  [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000
  [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff>
  [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5

The problem turns out to be that the memory map entry that describes the
framebuffer has no memory attributes listed at all, and so we end up with
a mem_flags value of 0x0.

So work around this by ensuring that the memory map entry's attribute field
has a sane value before using it to mask the set of usable attributes.
Reported-by: NJames Hilliard <james.hilliard1@gmail.com>
Tested-by: NJames Hilliard <james.hilliard1@gmail.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when ...")
Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      f8585539
    • A
      tty: Don't force RISCV SBI console as preferred console · f91253a3
      由 Anup Patel 提交于 
      The Linux kernel will auto-disables all boot consoles whenever it
gets a preferred real console.

Currently on RISC-V systems, if we have a real console which is not
RISCV SBI console then boot consoles (such as earlycon=sbi) are not
auto-disabled when a real console (ttyS0 or ttySIF0) is available.
This results in duplicate prints at boot-time after kernel starts
using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel
parameter was passed by bootloader.

The reason for above issue is that RISCV SBI console always adds
itself as preferred console which is causing other real consoles
to be not used as preferred console.

Ideally "console=" kernel parameter passed by bootloaders should
be the one selecting a preferred real console.

This patch fixes above issue by not forcing RISCV SBI console as
preferred console.

Fixes: afa6b1cc ("tty: New RISC-V SBI console driver")
Cc: stable@vger.kernel.org
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
      f91253a3
    • D
      soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe · c180d710
      由 Dan Carpenter 提交于 
      The devm_ioremap_resource() function doesn't retunr NULL, it returns
error pointers.

Fixes: ecc133c6 ("soc: ixp4xx: qmgr: Pass resources")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>
      c180d710
  7. 16 5月, 2019 7 次提交
    • S
      dm: fix a couple brace coding style issues · 8454fca4
      由 Sheetal Singala 提交于 
      Signed-off-by: NSheetal Singala <2396sheetal@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      8454fca4
    • M
      dm crypt: print device name in integrity error message · f710126c
      由 Milan Broz 提交于 
      This message should better identify the DM device with the integrity
failure.
Signed-off-by: NMilan Broz <gmazyland@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      f710126c
    • M
      dm crypt: move detailed message into debug level · 7a1cd723
      由 Milan Broz 提交于 
      The information about tag size should not be printed without debug info
set. Also print device major:minor in the error message to identify the
device instance.

Also use rate limiting and debug level for info about used crypto API
implementaton.  This is important because during online reencryption
the existing message saturates syslog (because we are moving hotzone
across the whole device).

Cc: stable@vger.kernel.org
Signed-off-by: NMilan Broz <gmazyland@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      7a1cd723
    • H
      dm ioctl: fix hang in early create error condition · 0f41fcf7
      由 Helen Koike 提交于 
      The dm_early_create() function (which deals with "dm-mod.create=" kernel
command line option) calls dm_hash_insert() who gets an extra reference
to the md object.

In case of failure, this reference wasn't being released, causing
dm_destroy() to hang, thus hanging the whole boot process.

Fix this by calling __hash_remove() in the error path.

Fixes: 6bbc923d ("dm: add support to directly boot to a mapped device")
Cc: stable@vger.kernel.org
Signed-off-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      0f41fcf7
    • S
      clk: Remove io.h from clk-provider.h · 62e59c4e
      由 Stephen Boyd 提交于 
      Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

  git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
  	xargs git grep -l \
	-e '\<__iowrite32_copy\>' --or \
	-e '\<__ioread32_copy\>' --or \
	-e '\<__iowrite64_copy\>' --or \
	-e '\<ioremap_page_range\>' --or \
	-e '\<ioremap_huge_init\>' --or \
	-e '\<arch_ioremap_pud_supported\>' --or \
	-e '\<arch_ioremap_pmd_supported\>' --or \
	-e '\<devm_ioport_map\>' --or \
	-e '\<devm_ioport_unmap\>' --or \
	-e '\<IOMEM_ERR_PTR\>' --or \
	-e '\<devm_ioremap\>' --or \
	-e '\<devm_ioremap_nocache\>' --or \
	-e '\<devm_ioremap_wc\>' --or \
	-e '\<devm_iounmap\>' --or \
	-e '\<devm_ioremap_release\>' --or \
	-e '\<devm_memremap\>' --or \
	-e '\<devm_memunmap\>' --or \
	-e '\<__devm_memremap_pages\>' --or \
	-e '\<pci_remap_cfgspace\>' --or \
	-e '\<arch_has_dev_port\>' --or \
	-e '\<arch_phys_wc_add\>' --or \
	-e '\<arch_phys_wc_del\>' --or \
	-e '\<memremap\>' --or \
	-e '\<memunmap\>' --or \
	-e '\<arch_io_reserve_memtype_wc\>' --or \
	-e '\<arch_io_free_memtype_wc\>' --or \
	-e '\<__io_aw\>' --or \
	-e '\<__io_pbw\>' --or \
	-e '\<__io_paw\>' --or \
	-e '\<__io_pbr\>' --or \
	-e '\<__io_par\>' --or \
	-e '\<__raw_readb\>' --or \
	-e '\<__raw_readw\>' --or \
	-e '\<__raw_readl\>' --or \
	-e '\<__raw_readq\>' --or \
	-e '\<__raw_writeb\>' --or \
	-e '\<__raw_writew\>' --or \
	-e '\<__raw_writel\>' --or \
	-e '\<__raw_writeq\>' --or \
	-e '\<readb\>' --or \
	-e '\<readw\>' --or \
	-e '\<readl\>' --or \
	-e '\<readq\>' --or \
	-e '\<writeb\>' --or \
	-e '\<writew\>' --or \
	-e '\<writel\>' --or \
	-e '\<writeq\>' --or \
	-e '\<readb_relaxed\>' --or \
	-e '\<readw_relaxed\>' --or \
	-e '\<readl_relaxed\>' --or \
	-e '\<readq_relaxed\>' --or \
	-e '\<writeb_relaxed\>' --or \
	-e '\<writew_relaxed\>' --or \
	-e '\<writel_relaxed\>' --or \
	-e '\<writeq_relaxed\>' --or \
	-e '\<readsb\>' --or \
	-e '\<readsw\>' --or \
	-e '\<readsl\>' --or \
	-e '\<readsq\>' --or \
	-e '\<writesb\>' --or \
	-e '\<writesw\>' --or \
	-e '\<writesl\>' --or \
	-e '\<writesq\>' --or \
	-e '\<inb\>' --or \
	-e '\<inw\>' --or \
	-e '\<inl\>' --or \
	-e '\<outb\>' --or \
	-e '\<outw\>' --or \
	-e '\<outl\>' --or \
	-e '\<inb_p\>' --or \
	-e '\<inw_p\>' --or \
	-e '\<inl_p\>' --or \
	-e '\<outb_p\>' --or \
	-e '\<outw_p\>' --or \
	-e '\<outl_p\>' --or \
	-e '\<insb\>' --or \
	-e '\<insw\>' --or \
	-e '\<insl\>' --or \
	-e '\<outsb\>' --or \
	-e '\<outsw\>' --or \
	-e '\<outsl\>' --or \
	-e '\<insb_p\>' --or \
	-e '\<insw_p\>' --or \
	-e '\<insl_p\>' --or \
	-e '\<outsb_p\>' --or \
	-e '\<outsw_p\>' --or \
	-e '\<outsl_p\>' --or \
	-e '\<ioread8\>' --or \
	-e '\<ioread16\>' --or \
	-e '\<ioread32\>' --or \
	-e '\<ioread64\>' --or \
	-e '\<iowrite8\>' --or \
	-e '\<iowrite16\>' --or \
	-e '\<iowrite32\>' --or \
	-e '\<iowrite64\>' --or \
	-e '\<ioread16be\>' --or \
	-e '\<ioread32be\>' --or \
	-e '\<ioread64be\>' --or \
	-e '\<iowrite16be\>' --or \
	-e '\<iowrite32be\>' --or \
	-e '\<iowrite64be\>' --or \
	-e '\<ioread8_rep\>' --or \
	-e '\<ioread16_rep\>' --or \
	-e '\<ioread32_rep\>' --or \
	-e '\<ioread64_rep\>' --or \
	-e '\<iowrite8_rep\>' --or \
	-e '\<iowrite16_rep\>' --or \
	-e '\<iowrite32_rep\>' --or \
	-e '\<iowrite64_rep\>' --or \
	-e '\<__io_virt\>' --or \
	-e '\<pci_iounmap\>' --or \
	-e '\<virt_to_phys\>' --or \
	-e '\<phys_to_virt\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<__ioremap\>' --or \
	-e '\<iounmap\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<ioremap_nocache\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wt\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<xlate_dev_kmem_ptr\>' --or \
	-e '\<xlate_dev_mem_ptr\>' --or \
	-e '\<unxlate_dev_mem_ptr\>' --or \
	-e '\<virt_to_bus\>' --or \
	-e '\<bus_to_virt\>' --or \
	-e '\<memset_io\>' --or \
	-e '\<memcpy_fromio\>' --or \
	-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Acked-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: NMark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NJohn Crispin <john@phrozen.org>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
      62e59c4e
    • S
      drm/msm: Upgrade gxpd checks to IS_ERR_OR_NULL · 2b117451
      由 Sean Paul 提交于 
      dev_pm_domain_attach_by_name() can return NULL, so we should check for
that case when we're about to dereference gxpd.

Fixes: 9325d426 ("drm/msm/gpu: Attach to the GPU GX power domain")
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Reviewed-by: NJordan Crouse <jcrouse@codeauorora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515170104.155525-1-sean@poorly.run
      2b117451
    • S
      drm/msm/dpu: Remove duplicate header · 26359dc5
      由 Sabyasachi Gupta 提交于 
      Remove dpu_kms.h which is included more than once
Signed-off-by: NSabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/5cda6de6.1c69fb81.a3ae5.836a@mx.google.com
      26359dc5
  9. 15 5月, 2019 15 次提交