Expose the namespace metadata format when PI is enabled. The user needs
to enable the capability per subsystem and per port. The other metadata
properties are taken from the namespace/bdev.

Usage example:
echo 1 > /config/nvmet/subsystems/${NAME}/attr_pi_enable
echo 1 > /config/nvmet/ports/${PORT_NUM}/param_pi_enable
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The function doesn't check only the data length, because the transfer
length includes also the metadata length in some cases. This is
preparation for adding metadata (T10-PI) support.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The function doesn't add the metadata length (only data length is
calculated). This is preparation for adding metadata (T10-PI) support.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fill those namespace fields from the block device format for adding
metadata (T10-PI) over fabric support with block devices.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

For capable HCAs (e.g. ConnectX-5/ConnectX-6) this will allow end-to-end
protection information passthrough and validation for NVMe over RDMA
transport. Metadata offload support was implemented over the new RDMA
signature verbs API and it is enabled for capable controllers.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove first_sgl pointer from struct nvme_rdma_request and use pointer
arithmetic instead. The inline scatterlist, if exists, will be located
right after the nvme_rdma_request. This patch is needed as a preparation
for adding PI support.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

SGL size of metadata is usually small. Thus, 1 inline sg should cover
most cases. The macro will be used for pre-allocate a single SGL entry
for metadata. The preallocation of small inline SGLs depends on SG_CHAIN
capability so if the ARCH doesn't support SG_CHAIN, use the runtime
allocation for the SGL. This patch is a preparation for adding metadata
(T10-PI) over fabric support.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

An extended LBA is a larger LBA that is created when metadata associated
with the LBA is transferred contiguously with the LBA data (AKA
interleaved). The metadata may be either transferred as part of the LBA
(creating an extended LBA) or it may be transferred as a separate
contiguous buffer of data. According to the NVMeoF spec, a fabrics ctrl
supports only an Extended LBA format. Fail revalidation in case we have a
spec violation. Also add a flag that will imply on capable transports and
controllers as part of a preparation for allowing end-to-end protection
information for fabric controllers.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch doesn't change any logic, and is needed as a preparation
for adding PI support for fabrics drivers that will use an extended
LBA format for metadata and will support more than 1 integrity segment.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Move the nvme_ns_has_pi() inline from core.c to the nvme.h header.
This allows use by the transports.
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
[maxg: added a comment for nvme_ns_has_pi()]
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is a preparation for adding support for metadata in fabric
controllers. New flag will imply that NVMe namespace supports getting
metadata that was originally generated by host's block layer.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Replace the specific ext boolean (that implies on extended LBA format)
with a feature in the new namespace features flag. This is a preparation
for adding more namespace features (such as metadata specific features).
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a new attribute "revalidate_size" for the namespace which allows
user to revalidate and generate the AEN if needed. This attribute is
needed so that we can install userspace rules with systemd service based
on inotify/fsnotify/uevent. The registered callback for such a service
will end up writing to this attribute to generate AEN if needed.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimbeg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The newly added function nvmet_ns_revalidate() does update the ns size
in the identify namespace in-core target data structure when host issues
id-ns command. This can lead to host having inconsistencies between size
of the namespace present in the id-ns command result and size of the
corresponding block device until host scans the namespaces explicitly.

To avoid this scenario generate AEN if old size is not same as the new
one in nvmet_ns_revalidate().

This will allow automatic AEN generation when host calls id-ns command
and also allows target to install userspace rules so that it can trigger
nvmet_ns_revalidate() (using configfs interface with the help of next
patch) resulting in appropriate AEN generation when underlying namespace
size change is detected.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimbeg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch adds a wrapper helper to indicate size change in the bdev &
file-backed namespace when revalidating ns. This helper is needed in
order to minimize code repetition in the next patch for configfs.c and
existing admin-cmd.c.  
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimbeg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This adds a new tracepoint for the target to trace async event. This is
helpful in debugging and comparing host and target side async events
especially when host is connected to different targets on different
machines and now that we rely on userspace components to generate AEN. 
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The nvme_put_ctrl() is implemented earlier as an inline function so
this declaration isn't required.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currently, a namespace io_opt queue limit is set by default to the
physical sector size of the namespace and to the the write optimal
size (NOWS) when the namespace reports optimal IO sizes. This causes
problems with block limits stacking in blk_stack_limits() when a
namespace block device is combined with an HDD which generally do not
report any optimal transfer size (io_opt limit is 0). The code:

/* Optimal I/O a multiple of the physical block size? */
if (t->io_opt & (t->physical_block_size - 1)) {
	t->io_opt = 0;
	t->misaligned = 1;
	ret = -1;
}

in blk_stack_limits() results in an error return for this function when
the combined devices have different but compatible physical sector
sizes (e.g. 512B sector SSD with 4KB sector disks).

Fix this by not setting the optimal IO size queue limit if the namespace
does not report an optimal write size value.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NBart van Assche <bvanassche@acm.org>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Disable streams again if getting the stream params fails.
Signed-off-by: NWu Bo <wubo40@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The nvme-fc devloss_tmo is computed as the min of either the
ctrl_loss_tmo (max_retries * reconnect_delay) or the remote port's
devloss_tmo. But what gets printed as the nvme-fc devloss_tmo in
nvme_fc_reconnect_or_delete() is always the remote port's devloss_tmo
value. So correct this by printing the min value instead.
Signed-off-by: NMartin George <marting@netapp.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Check module parameter write/poll_queues before using it to catch
too large values.

Reproducer:

modprobe -r nvme
modprobe nvme write_queues=`nproc`
echo $((`nproc`+1)) > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller

[  657.069000] ------------[ cut here ]------------
[  657.069022] WARNING: CPU: 10 PID: 1163 at kernel/irq/affinity.c:390 irq_create_affinity_masks+0x47c/0x4a0
[  657.069056]  dm_region_hash dm_log dm_mod
[  657.069059] CPU: 10 PID: 1163 Comm: kworker/u193:9 Kdump: loaded Tainted: G        W         5.6.0+ #8
[  657.069060] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[  657.069064] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[  657.069066] RIP: 0010:irq_create_affinity_masks+0x47c/0x4a0
[  657.069067] Code: fe ff ff 48 c7 c0 b0 89 14 95 48 89 46 20 e9 e9 fb ff ff 31 c0 e9 90 fc ff ff 0f 0b 48 c7 44 24 08 00 00 00 00 e9 e9 fc ff ff <0f> 0b e9 87 fe ff ff 48 8b 7c 24 28 e8 33 a0 80 00 e9 b6 fc ff ff
[  657.069068] RSP: 0018:ffffb505ce1ffc78 EFLAGS: 00010202
[  657.069069] RAX: 0000000000000060 RBX: ffff9b97921fe5c0 RCX: 0000000000000000
[  657.069069] RDX: ffff9b67bad80000 RSI: 00000000ffffffa0 RDI: 0000000000000000
[  657.069070] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9b97921fe718
[  657.069070] R10: ffff9b97921fe710 R11: 0000000000000001 R12: 0000000000000064
[  657.069070] R13: 0000000000000060 R14: 0000000000000000 R15: 0000000000000001
[  657.069071] FS:  0000000000000000(0000) GS:ffff9b67c0880000(0000) knlGS:0000000000000000
[  657.069072] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  657.069072] CR2: 0000559eac6fc238 CR3: 000000057860a002 CR4: 00000000007606e0
[  657.069073] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  657.069073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  657.069073] PKRU: 55555554
[  657.069074] Call Trace:
[  657.069080]  __pci_enable_msix_range+0x233/0x5a0
[  657.069085]  ? kernfs_put+0xec/0x190
[  657.069086]  pci_alloc_irq_vectors_affinity+0xbb/0x130
[  657.069089]  nvme_reset_work+0x6e6/0xeab [nvme]
[  657.069093]  ? __switch_to_asm+0x34/0x70
[  657.069094]  ? __switch_to_asm+0x40/0x70
[  657.069095]  ? nvme_irq_check+0x30/0x30 [nvme]
[  657.069098]  process_one_work+0x1a7/0x370
[  657.069101]  worker_thread+0x1c9/0x380
[  657.069102]  ? max_active_store+0x80/0x80
[  657.069103]  kthread+0x112/0x130
[  657.069104]  ? __kthread_parkme+0x70/0x70
[  657.069105]  ret_from_fork+0x35/0x40
[  657.069106] ---[ end trace f4f06b7d24513d06 ]---
[  657.077110] nvme nvme0: 95/1/0 default/read/poll queues
Signed-off-by: NWeiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Have routines handle errors and just bail out of the poll loop.
This simplifies the code and will help as we may enhance the poll
loop logic and these are somewhat in the way.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

when trying to send the pdu data digest, we should set this
flag.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We can signal the stack that this is not the last page coming and the
stack can build a larger tso segment, so go ahead and use it.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We can signal the stack that this is not the last page coming and the
stack can build a larger tso segment, so go ahead and use it.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

It is more efficient to use kmemdup_nul() if the size is known exactly.

The doc in kernel:
"Note: Use kmemdup_nul() instead if the size is known exactly."
Signed-off-by: NChen Zhou <chenzhou10@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case
in floppy_queue_rq() is not handled correctly.

In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy
locked due to another request still being in-flight), we put the request
on the list of requests and return BLK_STS_OK to the block core, without
actually scheduling delayed work / doing further processing of the
request. This means that processing of this request is postponed until
another request comes and passess uncontended.

Which in some cases might actually never happen and we keep waiting
indefinitely. The simple testcase is

	for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done

run in quemu. That reliably causes blkid eventually indefinitely hanging
in __floppy_read_block_0() waiting for completion, as the BIO callback
never happens, and no further IO is ever submitted on the (non-existent)
floppy device. This was observed reliably on qemu-emulated device.

Fix that by not queuing the request in the contended case, and return
BLK_STS_RESOURCE instead, so that blk core handles the request
rescheduling and let it pass properly non-contended later.

Fixes: a9f38e1d ("floppy: convert to blk-mq")
Cc: stable@vger.kernel.org
Tested-by: NLibor Pechacek <lpechacek@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The variable error is being assigned a value that is never
read so the assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The IBM partition parser requires device type specific information only
available to the DASD driver to correctly register partitions. The
current approach of using ioctl_by_bdev with a fake user space pointer
is discouraged.

Fix this by replacing IOCTL calls with direct in-kernel function calls.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NStefan Haberland <sth@linux.ibm.com>
Reviewed-by: NJan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: NPeter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Prepare for in-kernel callers of this functionality.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
[sth@de.ibm.com: remove leftover kfree]
Signed-off-by: NStefan Haberland <sth@linux.ibm.com>
Reviewed-by: NPeter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: NJan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.

Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.

In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
  loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
  in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
  in loop_config.info.lo_flags

Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
    0m03.40s real     0m00.02s user     0m00.03s system

Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
    0m01.94s real     0m00.01s user     0m00.01s system
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.

The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In preparation for a new ioctl that needs to copy_from_user(); makes the
code easier to read as well.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

So we can use it without forward declaration. This is a separate commit
to make it easier to verify that this is just a move, without functional
modifications.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Factor out this code into a separate function, so it can be reused by
other code more easily.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This function was now only used by loop_set_capacity(). Just open code
the remaining code in the caller instead.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

figure_loop_size() calculates the loop size based on the passed in
parameters, but at the same time it updates the offset and sizelimit
parameters in the loop device configuration. That is a somewhat
unexpected side effect of a function with this name, and it is only only
needed by one of the two callers of this function - loop_set_status().

Move the lo_offset and lo_sizelimit assignment back into loop_set_status(),
and use the newly factored out functions to validate and apply the newly
calculated size. This allows us to get rid of figure_loop_size() in a
follow-up commit.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This was recently added to block/genhd.c, and takes care of both
updating the capacity and notifying userspace of the new size.
Signed-off-by: NMartijn Coenen <maco@android.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>