unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Fixes following build error:

  CC      drivers/usb/gadget/fsl_qe_udc.o
drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_stall_change':
drivers/usb/gadget/fsl_qe_udc.c:156: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c:163: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eptx_stall_change':
drivers/usb/gadget/fsl_qe_udc.c:173: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c:180: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_nack':
drivers/usb/gadget/fsl_qe_udc.c:201: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c:201: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_normal':
drivers/usb/gadget/fsl_qe_udc.c:218: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c:218: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_ep_reset':
drivers/usb/gadget/fsl_qe_udc.c:325: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c:342: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_ep_register_init':
drivers/usb/gadget/fsl_qe_udc.c:515: error: 'struct usb_ctlr' has no member named 'usb_usep'
drivers/usb/gadget/fsl_qe_udc.c: In function 'ch9getstatus':
drivers/usb/gadget/fsl_qe_udc.c:1981: error: 'struct usb_ctlr' has no member named 'usb_usep'
make[2]: *** [drivers/usb/gadget/fsl_qe_udc.o] Error 1
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch corrects the bus-frequency value provided in the SBC610's dts.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The implemetation of _tlbil_pid() on Freescale Book-E cores needs
an msync & isync after we flash invalidate the TLBs.  This was causing
the following oops reported by Sebastian Andrzej Siewior:

  VFS: Mounted root (nfs filesystem) readonly.
  Freeing unused kernel memory: 148k init
  BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/mm/mmap.c:234
  in_atomic():1, irqs_disabled():0
  Call Trace:
  [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable)
  [df189e30] [c0029480] __might_sleep+0xf0/0x100
  [df189e40] [c0070ac0] remove_vma+0x28/0x98
  [df189e50] [c0070c1c] exit_mmap+0xec/0x128
  [df189e80] [c002d2f4] mmput+0x54/0xec
  [df189ea0] [c0030b6c] exit_mm+0x10c/0x120
  [df189ed0] [c003288c] do_exit+0x1ac/0x6e8
  [df189f20] [c0032e48] do_group_exit+0x80/0xac
  [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c
  BUG: scheduling while atomic: udevd/956/0x10000002
  Modules linked in:
  Call Trace:
  [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable)
  [df189e30] [c002ac88] __schedule_bug+0x58/0x6c
  [df189e40] [c023e6cc] schedule+0xa8/0x4a8
  [df189e90] [c002ad6c] __cond_resched+0x38/0x64
  [df189ea0] [c023ebc8] _cond_resched+0x3c/0x58
  [df189eb0] [c0030e70] put_files_struct+0x90/0xec
  [df189ed0] [c00328a8] do_exit+0x1c8/0x6e8
  [df189f20] [c0032e48] do_group_exit+0x80/0xac
  [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This gets rid of this build warning:

arch/powerpc/platforms/pseries/pci_dlpar.c: In function 'init_phb_dynamic':
arch/powerpc/platforms/pseries/pci_dlpar.c:192: warning: unused variable 'b'

This is one of the very few warnings left in a ppc64_defconfig build and
getting rid of it will make it easier to see future introduced ones (in
fact this was introduced very recently).
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes this error on Cell when CONFIG_KEXEC = n:

arch/powerpc/platforms/cell/ras.c:299: error: implicit declaration of function 'crash_shutdown_register'

We have to include <asm/kexec.h> because it contains the dummy
definition of crash_shutdown_register that is used when
CONFIG_KEXEC=n, but <linux/kexec.h> doesn't include <asm/kexec.h> in
that case.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reverts commit 91a00302, plus
commit 0dcd4401 ("powerpc: Revert CHRP
boot wrapper to real-base = 12MB on 32-bit") which depended on it.

Commit 91a00302 was causing NVRAM corruption on some pSeries machines,
for as-yet unknown reasons, so this reverts it until the cause is
identified.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This makes sure we don't try to call find_bug or is_warning_bug when
CONFIG_BUG=n and CONFIG_XMON=y.  Otherwise we get these errors:

arch/powerpc/xmon/xmon.c: In function ‘print_bug_trap’:
arch/powerpc/xmon/xmon.c:1364: error: implicit declaration of function ‘find_bug’
arch/powerpc/xmon/xmon.c:1364: warning: assignment makes pointer from integer without a cast
arch/powerpc/xmon/xmon.c:1367: error: implicit declaration of function ‘is_warning_bug’
arch/powerpc/xmon/xmon.c:1374: error: dereferencing pointer to incomplete type
make[2]: *** [arch/powerpc/xmon/xmon.o] Error 1
make[1]: *** [arch/powerpc/xmon] Error 2
make: *** [sub-make] Error 2
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix format string warning in arch/powerpc/boot/main.c.  Also correct
a typo ("uncomressed") on the same line.

 BOOTCC  arch/powerpc/boot/main.o
arch/powerpc/boot/main.c: In function 'prep_kernel':
arch/powerpc/boot/main.c:65: warning: format '%08x' expects type
'unsigned int', but argument 3 has type 'long unsigned int'
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

There's currently an off-by-one bug in fdt_subnode_offset_namelen()
which causes it to keep searching after it's finished the subnodes of
the given parent, and into the subnodes of siblings of the original
node which come after it in the tree.  This bug was introduced in
commit ed95d745 ("powerpc: Update
in-kernel dtc and libfdt to version 1.2.0").

A patch has already been submitted to dtc/libfdt mainline.  We don't
really want to pull in a new upstream version during the 2.6.28 cycle,
but we should still fix this bug, hence this standalone version of the
fix for the in-kernel libfdt.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit 57436612 added a duplicate
DMA controller node.
Signed-off-by: NMike Dyer <mike.dyer@provision-comm.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The size of the pm_signal_local array should be equal to the
number of SPUs being configured in the array.  Currently, the
array is of size 4 (NR_PHYS_CTRS) but being indexed by a for
loop from 0 to 7 (NUM_SPUS_PER_NODE).  This could potentially
cause an oops or random memory corruption since the pm_signal_local
array is on the stack.  This fixes it.
Signed-off-by: NCarl Love <carll@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The Freescale implementation of MPIC only allows a single CPU destination
for non-IPI interrupts.  We add a flag to the mpic_init to distinquish
these variants of MPIC.  We pull in the irq_choose_cpu from sparc64 to
select a single CPU as the destination of the interrupt.

This is to deal with the fact that the default smp affinity was
changed by commit 18404756 ("genirq:
Expose default irq affinity mask (take 3)") to be all CPUs.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

After the merge of the 32 and 64bit DMA code, dma_direct_ops lost
their map/unmap_single() functions but gained map/unmap_page().  This
caused a problem for Cell because Cell's dma_iommu_fixed_ops called
the dma_direct_ops if the fixed linear mapping was to be used or the
iommu ops if the dynamic window was to be used.  So in order to fix
this problem we need to update the 64bit DMA code to use
map/unmap_page.

First, we update the generic IOMMU code so that iommu_map_single()
becomes iommu_map_page() and iommu_unmap_single() becomes
iommu_unmap_page().  Then we propagate these changes up through all
the callers of these two functions and in the process update all the
dma_mapping_ops so that they have map/unmap_page rahter than
map/unmap_single.  We can do this because on 64bit there is no HIGHMEM
memory so map/unmap_page ends up performing exactly the same function
as map/unmap_single, just taking different arguments.

This has no affect on drivers because the dma_map_single_attrs() just
ends up calling the map_page() function of the appropriate
dma_mapping_ops and similarly the dma_unmap_single_attrs() calls
unmap_page().

This fixes an oops on Cell blades, which oops on boot without this
because they call dma_direct_ops.map_single, which is NULL.
Signed-off-by: NMark Nelson <markn@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A typo/thinko made us pass the wrong argument to __flush_hash_table_range
when unplugging bridges, thus not flushing all the translations for
the IO space on unplug.  The third parameter to __flush_hash_table_range
is `end', not `size'.

This causes the hypervisor to refuse unplugging slots.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Resources for PHB's that are dynamically added to a system are not
properly allocated in the resource tree.

Not having these resources allocated causes an oops when removing
the PHB when we try to release them.

The diff appears a bit messy, this is mainly due to moving everything
one tab to the left in the pcibios_allocate_bus_resources routine.
The functionality change in this routine is only that the
list_for_each_entry() loop is pulled out and moved to the necessary
calling routine.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently, the numa_node of OF-devices will be overwritten during
device_register, which simply sets the node to -1.  On cell machines,
this means that devices can't find their IOMMU, which is referenced
through the device's numa node.

Set the numa node for OF devices with no parent, and use the
lower-level device_initialize and device_add functions, so that the
node is preserved.

We can remove the call to set_dev_node in of_device_alloc, as it
will be overwritten during register.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since VSX support was added, we now have two sizes of ucontext_t;
the older, smaller size without the extra VSX state, and the new
larger size with the extra VSX state.  A program using the
sys_swapcontext system call and supplying smaller ucontext_t
structures will currently get an EINVAL error if the task has
used VSX (e.g. because of calling library code that uses VSX) and
the old_ctx argument is non-NULL (i.e. the program is asking for
its current context to be saved).  Thus the program will start
getting EINVAL errors on calls that previously worked.

This commit changes this behaviour so that we don't send an EINVAL in
this case.  It will now return the smaller context but the VSX MSR bit
will always be cleared to indicate that the ucontext_t doesn't include
the extra VSX state, even if the task has executed VSX instructions.

Both 32 and 64 bit cases are updated.

[paulus@samba.org - also fix some access_ok() and get_user() calls]

Thanks to Ben Herrenschmidt for noticing this problem.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fixes this warning:
 arch/powerpc/kernel/setup_64.c:447:5: warning: "kernstart_addr" is not defined

which arises because PHYSICAL_START is no longer a constant when
CONFIG_RELOCATABLE=y.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit 549e8152 ("powerpc: Make the
64-bit kernel as a position-independent executable") added lines to
vmlinux.lds.S to add the extra sections needed to implement a
relocatable kernel.  However, those lines seem to trigger a bug in
older versions of GNU ld (such as 2.16.1) when building a
non-relocatable kernel.  Since ld 2.16.1 is still a popular choice for
cross-toolchains, this adds an #ifdef to vmlinux.lds.S so the added
lines are only included when building a relocatable kernel.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The __kdump_flag ABI is overly constraining for future development.

As of 2.6.27, the kernel entry point has 4 constraints:  Offset 0 is
the starting point for the master (boot) cpu (entered with r3 pointing
to the device tree structure), offset 0x60 is code for the slave cpus
(entered with r3 set to their device tree physical id), offset 0x20 is
used by the iseries hypervisor, and secondary cpus must be well behaved
when the first 256 bytes are copied to address 0.

Placing the __kdump_flag at 0x18 is bad because:

- It was taking the last 8 bytes before the iseries hypervisor data.
- It was 8 bytes for a boolean flag
- It had no way of identifying that the flag was present
- It does leave any room for the master to add any additional code
  before branching, which hurts debug.
- It will be unnecessarily hard for 32 bit code to be common (8 bytes)

Now that we have eliminated the use of __kdump_flag in favor of
the standard is_kdump_kernel(), this flag only controls run without
relocating the kernel to PHYSICAL_START (0), so rename it __run_at_load.

Move the flag to 0x5c, 1 word before the secondary cpu entry point at
0x60.  Initialize it with "run0" to say it will run at 0 unless it is
set to 1.  It only exists if we are relocatable.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

linux/crash_dump.h defines is_kdump_kernel() to be used by code that
needs to know if the previous kernel crashed instead of a (clean) boot
or reboot.

This updates the just added powerpc code to use it.  This is needed
for the next commit, which will remove __kdump_flag.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit 54622f10 ("powerpc: Support for
relocatable kdump kernel") added a magic flag value in a register to
tell purgatory that it should be a panic kernel.  This part is wrong
and is reverted by this commit.

The kernel gets a list of memory blocks and a entry point from user space.
Its job is to copy the blocks into place and then branch to the designated
entry point (after turning "off" the mmu).

The user space tool inserts a trampoline, called purgatory, that runs
before the user supplied code.   Its job is to establish the entry
environment for the new kernel or other application based on the contents
of memory.  The purgatory code is compiled and embedded in the tool,
where it is later patched using the elf symbol table using elf symbols.

Since the tool knows it is creating a purgatory that will run after a
kernel crash, it should just patch purgatory (or the kernel directly)
if something needs to happen.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The init_phy() function attaches to the PHY, then configures the
SerDes<->TBI link (in SGMII mode).  The TBI is on the MDIO bus with the PHY
(sort of) and is accessed via the gianfar's MDIO registers, using the
functions gfar_local_mdio_read/write(), which don't do any locking.

The previously attached PHY will start a work-queue on a timer, and
probably an irq handler as well, which will talk to the PHY and thus use
the MDIO bus.  This uses phy_read/write(), which have locking, but not
against the gfar_local_mdio versions.

The result is that PHY code will try to use the MDIO bus at the same time
as the SerDes setup code, corrupting the transfers.

Setting up the SerDes before attaching to the PHY will insure that there is
no race between the SerDes code and *our* PHY, but doesn't fix everything.
Typically the PHYs for all gianfar devices are on the same MDIO bus, which
is associated with the first gianfar device.  This means that the first
gianfar's SerDes code could corrupt the MDIO transfers for a different
gianfar's PHY.

The lock used by phy_read/write() is contained in the mii_bus structure,
which is pointed to by the PHY.  This is difficult to access from the
gianfar drivers, as there is no link between a gianfar device and the
mii_bus which shares the same MDIO registers.  As far as the device layer
and drivers are concerned they are two unrelated devices (which happen to
share registers).

Generally all gianfar devices' PHYs will be on the bus associated with the
first gianfar.  But this might not be the case, so simply locking the
gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup
code is going to use.

We solve this by having the code that creates the gianfar platform device
look in the device tree for an mdio device that shares the gianfar's
registers.  If one is found the ID of its platform device is saved in the
gianfar's platform data.

A new function in the gianfar mii code, gfar_get_miibus(), can use the bus
ID to search through the platform devices for a gianfar_mdio device with
the right ID.  The platform device's driver data is the mii_bus structure,
which the SerDes setup code can use to lock the current bus.
Signed-off-by: NTrent Piepho <tpiepho@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Update the PowerPC 44x defconfigs for 2.6.28
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Update the PowerPC 40x defconfigs for 2.6.28
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The current defconfig for Linkstation/Kuroboxes has the "Disable Heap
Randomization" option enabled.

Since some of these machines are facing the internet, it helps to have
heap randomization enabled. This patch enables it.
Signed-off-by: NRogério Brito <rbrito@ime.usp.br>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Since Linkstations and Kuroboxes often have *very* little memory (as
they are embedded systems), it is desirable to get their kernels
compiled optimized for size.
Signed-off-by: NRogério Brito <rbrito@ime.usp.br>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The i2c bus defn is broken on linkstation / kurobox machines since at
least 2.6.27. Fix it. Also remove CONFIG_SERIAL_OF_PLATFORM, which, if
enabled, breaks the serial console after the
"console handover: boot [udbg0] -> real [ttyS1]" message.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Fix the HCU4 Kconfig option to 'default n'.  We don't want the
board to always be enabled for other board defconfigs.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The entire file of ftrace.c in the arch code needs to be marked
as notrace. It is much cleaner to do this from the Makefile with
CFLAGS_REMOVE_ftrace.o.

[ powerpc already had this in its Makefile. ]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The ftrace daemon is complex and can cause nasty races if something goes
wrong. Since it affects all of the kernel, this patch disables dynamic
ftrace from any arch that depends on the daemon. Until the archs are
ported over to the new MCOUNT_RECORD method, I am disabling dynamic
ftrace from them.

Note: I am leaving in the arch/<arch>/kernel/ftrace.c code alone since
that can be used when the arch is ported to MCOUNT_RECORD. To port
the arch to MCOUNT_RECORD, the scripts/recordmcount.pl needs to be
updated. I will make that easier to do for 2.6.29. For 28, we will keep
the archs disabled.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

the only theoretical reason for it these days is ppc; aside of uml/ppc
being dead, do_signal() would be happier in arch/powerpc/kernel/signal.h
anyway.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This adds relocatable kernel support for kdump. With this one can
use the same regular kernel to capture the kdump. A signature (0xfeed1234)
is passed in r6 from panic code to the next kernel through kexec_sequence
and purgatory code. The signature is used to differentiate between
kdump kernel and non-kdump kernels.

The purgatory code compares the signature and sets the __kdump_flag in
head_64.S.  During the boot up, kernel code checks __kdump_flag and if it
is set, the kernel will behave as relocatable kdump kernel. This kernel
will boot at the address where it was loaded by kexec-tools ie. at the
address reserved through crashkernel boot parameter.

CONFIG_CRASH_DUMP depends on CONFIG_RELOCATABLE option to build kdump
kernel as relocatable. So the same kernel can be used as production and
kdump kernel.

This patch incorporates the changes suggested by Paul Mackerras to avoid
GOT use and to avoid two copies of the code.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMohan Kumar M <mohan@in.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If mem= is used on the boot command line to limit memory then the memory block where a 16G page resides may not be available.

Thanks to Michael Ellerman for finding the problem.
Signed-off-by: NJon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some platforms have variants that can share most of a flat device tree but need
a few devices selectively pruned at boot time.  This adds del_node() to ops.h
to allow access to the existing fdt_del_node().
Signed-off-by: NMike Ditto <mditto@consentry.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A patch of mine was recently committed to fix up STRICT_MM_TYPECHECKS
behaviour on powerpc (f5ea64dc).
However, something which breaks it again seems to have slipped in
afterwards.  So, here's another small fix.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Remove empty/bogus #else from signal_64.c
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>