- 13 7月, 2011 10 次提交
-
-
由 Christoph Hellwig 提交于
Remove the dead hash table test rid which has been rotting away under QUOTADEBUG, including some code that was compiled for normal debug builds, but not actually called without QUOTADEBUG, and enable a few cheap debug checks that were hidden under QUOTADEBUG for normal debug builds. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Replace the typeless b_fspriv2 and the ugly macros around it with a properly typed transaction pointer. As a fallout the log buffer state debug checks are also removed. We could have kept them using casts, but as they do not have a real purpose we can as well just remove them. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
xfs_da_grow_inode and xfs_dir2_grow_inode are mostly duplicate code. Factor the meat of those two functions into a new common helper. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Change the bests array to be a proper variable sized entry. This is done easily as no one relies on the size of the structure. Also change XFS_DIR2_MAX_FREE_BESTS to an inline function while we're at it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Replace the current mess of dir2 headers with just three that have a clear purpose: - xfs_dir2_format.h for all format definitions, including the inline helpers to access our variable size structures - xfs_dir2_priv.h for all prototypes that are internal to the dir2 code and not needed by anything outside of the directory code. For this purpose xfs_da_btree.c, and phase6.c in xfs_repair are considered part of the directory code. - xfs_dir2.h for the public interface to the directory code In addition to the reshuffle I have also update the comments to not only match the new file structure, but also to describe the directory format better. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Start the periodic sync workers only after we have finished xfs_mountfs and thus fully set up the filesystem structures. Without this we can call into xfs_qm_sync before the quotainfo strucute is set up if the mount takes unusually long, and probably hit other incomplete states as well. Also clean up the xfs_fs_fill_super error path by using consistent label names, and removing an impossible to reach case. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NArkadiusz Miskiewicz <arekm@maven.pl> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
- 11 7月, 2011 1 次提交
-
-
由 Alex Elder 提交于
This reverts commit 7a249cf8. That commit created a situation that could lead to a filesystem hang. As Dave Chinner pointed out, xfs_trans_alloc() could hold a reference to m_active_trans (i.e., keep it non-zero) and then wait for SB_FREEZE_TRANS to complete. Meanwhile a filesystem freeze request could set SB_FREEZE_TRANS and then wait for m_active_trans to drop to zero. Nobody benefits from this sequence of events... Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 09 7月, 2011 2 次提交
-
-
由 Chandra Seetharaman 提交于
Remove two variables that serve no purpose in xfs_alloc_ag_vextent_exact(). Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Eric Sandeen 提交于
Pavol pointed out that there is one silent error case in the mount path, and that others are rather uninformative. I've taken Pavol's suggested patch and extended it a bit to also: * fix a message which says "turned off" but actually errors out * consolidate the vaguely differentiated "SB sanity check [12]" messages, and hexdump the superblock for analysis Original-patch-by: NPavol Gono <Pavol.Gono@siemens.com> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 08 7月, 2011 27 次提交
-
-
由 Christoph Hellwig 提交于
There is no need for a pre-flush when doing writing the second part of a split log buffer, and if we are using an external log there is no need to do a full cache flush of the log device at all given that all writes to it use the FUA flag. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the unused and misnamed _XBF_RUN_QUEUES flag, rename XBF_LOG_BUFFER to the more fitting XBF_SYNCIO, and split XBF_ORDERED into XBF_FUA and XBF_FLUSH to allow more fine grained control over the bio flags. Also cleanup processing of the flags in _xfs_buf_ioapply to make more sense, and renumber the sparse flag number space to group flags by purpose. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
All other xfs_buf_get/read-like helpers return the buffer locked, make sure xfs_buf_get_uncached isn't different for no reason. Half of the callers already lock it directly after, and the others probably should also keep it locked if only for consistency and beeing able to use xfs_buf_rele, but I'll leave that for later. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Rename xfs_buf_cond_lock and reverse it's return value to fit most other trylock operations in the Kernel and XFS (with the exception of down_trylock, after which xfs_buf_cond_lock was modelled), and replace xfs_buf_lock_val with an xfs_buf_islocked for use in asserts, or and opencoded variant in tracing. remove the XFS_BUF_* wrappers for all the locking helpers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Micro-optimize various comparisms by always byteswapping the constant instead of the variable, which allows to do the swap at compile instead of runtime. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Switch the shortform directory code over to use the generic get_unaligned_beXX helpers instead of reinventing them. As a result kill off xfs_arch.h and move the setting of XFS_NATIVE_HOST into xfs_linux.h. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Simplify the confusing xfs_dir2_leaf structure. It is supposed to describe an XFS dir2 leaf format btree block, but due to the variable sized nature of almost all elements in it it can't actuall do anything close to that job. Remove the members that are after the first variable sized array, given that they could only be used for sizeof expressions that can as well just use the underlying types directly, and make the ents array a real C99 variable sized array. Also factor out the xfs_dir2_leaf_size, to make the sizing of a leaf entry which already was convoluted somewhat readable after using the longer type names in the sizeof expressions. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the tag member which is at a variable offset after the actual name, and make name a real variable sized C99 array instead of the incorrect one-sized array which confuses (not only) gcc. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the confusing xfs_dir2_data structure. It is supposed to describe an XFS dir2 data btree block, but due to the variable sized nature of almost all elements in it it can't actuall do anything close to that job. In addition to accessing the fixed offset header structure it was only used to get a pointer to the first dir or unused entry after it, which can be trivially replaced by pointer arithmetics on the header pointer. For most users that is actually more natural anyway, as they don't use a typed pointer but rather a character pointer for further arithmetics. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
In most places we can simply pass around and use the struct xfs_dir2_data_hdr, which is the first and most important member of struct xfs_dir2_data instead of the full structure. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the confusing xfs_dir2_block structure. It is supposed to describe an XFS dir2 block format btree block, but due to the variable sized nature of almost all elements in it it can't actuall do anything close to that job. In addition to accessing the fixed offset header structure it was only used to get a pointer to the first dir or unused entry after it, which can be trivially replaced by pointer arithmetics on the header pointer. For most users that is actually more natural anyway, as they don't use a typed pointer but rather a character pointer for further arithmetics. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
In most places we can simply pass around and use the struct xfs_dir2_data_hdr, which is the first and most important member of struct xfs_dir2_block instead of the full structure. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the inumber member which is at a variable offset after the actual name, and make name a real variable sized C99 array instead of the incorrect one-sized array which confuses (not only) gcc. Based on this clean up the helpers to calculate the entry size. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
The list field of it is never cactually used, so all uses can simply be replaced with the xfs_dir2_sf_hdr_t type that it has as first member. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Refactor the shortform directory helpers that deal with the 32-bit vs 64-bit wide inode numbers into more sensible helpers, and kill the xfs_intino_t typedef that is now superflous. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Add a new xfs_dir2_leaf_find_entry helper to factor out some duplicate code from xfs_dir2_leaf_addname xfs_dir2_leafn_add. Found by Eric Sandeen using an automated code duplication checker. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the transaction pointer in the inode. It's only used to avoid passing down an argument in the bmap code, and for a few asserts in the transaction code right now. Also use the local variable ip in a few more places in xfs_inode_item_unlock, so that it isn't only used for debug builds after the above change. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
As pointed out by Jan xfs_trans_alloc can race with a concurrent filesystem freeze when it sleeps during the memory allocation. Fix this by moving the wait_for_freeze call after the memory allocation. This means moving the freeze into the low-level _xfs_trans_alloc helper, which thus grows a new argument. Also fix up some comments in that area while at it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
The following script from Wu Fengguang shows very bad behaviour in XFS when aggressively dirtying data during a sync on XFS, with sync times up to almost 10 times as long as ext4. A large part of the issue is that XFS writes data out itself two times in the ->sync_fs method, overriding the livelock protection in the core writeback code, and another issue is the lock-less xfs_ioend_wait call, which doesn't prevent new ioend from being queue up while waiting for the count to reach zero. This patch removes the XFS-internal sync calls and relies on the VFS to do it's work just like all other filesystems do. Note that the i_iocount wait which is rather suboptimal is simply removed here. We already do it in ->write_inode, which keeps the current supoptimal behaviour. We'll eventually need to remove that as well, but that's material for a separate commit. ------------------------------ snip ------------------------------ #!/bin/sh umount /dev/sda7 mkfs.xfs -f /dev/sda7 # mkfs.ext4 /dev/sda7 # mkfs.btrfs /dev/sda7 mount /dev/sda7 /fs echo $((50<<20)) > /proc/sys/vm/dirty_bytes pid= for i in `seq 10` do dd if=/dev/zero of=/fs/zero-$i bs=1M count=1000 & pid="$pid $!" done sleep 1 tic=$(date +'%s') sync tac=$(date +'%s') echo echo sync time: $((tac-tic)) egrep '(Dirty|Writeback|NFS_Unstable)' /proc/meminfo pidof dd > /dev/null && { kill -9 $pid; echo sync NOT livelocked; } ------------------------------ snip ------------------------------ Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NWu Fengguang <fengguang.wu@intel.com> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Split the guts of xfs_itruncate_finish that loop over the existing extents and calls xfs_bunmapi on them into a new helper, xfs_itruncate_externs. Make xfs_attr_inactive call it directly instead of xfs_itruncate_finish, which allows to simplify the latter a lot, by only letting it deal with the data fork. As a result xfs_itruncate_finish is renamed to xfs_itruncate_data to make its use case more obvious. Also remove the sync parameter from xfs_itruncate_data, which has been unessecary since the introduction of the busy extent list in 2002, and completely dead code since 2003 when the XFS_BMAPI_ASYNC parameter was made a no-op. I can't actually see why the xfs_attr_inactive needs to set the transaction sync, but let's keep this patch simple and without changes in behaviour. Also avoid passing a useless argument to xfs_isize_check, and make it private to xfs_inode.c. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
xfs_itruncate_start is a rather length wrapper that evaluates to a call to xfs_ioend_wait and xfs_tosspages, and only has two callers. Instead of using the complicated checks left over from IRIX where we can to truncate the pagecache just call xfs_tosspages (aka truncate_inode_pages) directly as we want to get rid of all data after i_size, and truncate_inode_pages handles incorrect alignments and too large offsets just fine. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Get rid of the special case where we use unlogged timestamp updates for a truncate to the current inode size, and just call xfs_setattr_nonsize for it to treat it like a utimes calls. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Split up xfs_setattr into two functions, one for the complex truncate handling, and one for the trivial attribute updates. Also move both new routines to xfs_iops.c as they are fairly Linux-specific. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
GCC 4.6 complains about an array subscript is above array bounds when using the btree index to index into the agf_levels array. The only two indices passed in are 0 and 1, and we have an assert insuring that. Replace the trick of using the array index directly with using constants in the already existing branch for assigning the XFS_BTREE_LASTREC_UPDATE flag. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
The non-blockig behaviour in xfs_vm_writepage currently is conditional on having both the WB_SYNC_NONE sync_mode and the nonblocking flag set. The latter used to be used by both pdflush, kswapd and a few other places in older kernels, but has been fading out starting with the introduction of the per-bdi flusher threads. Enable the non-blocking behaviour for all WB_SYNC_NONE calls to get back the behaviour we want. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-