- 22 2月, 2011 2 次提交
-
-
由 Johan Hedberg 提交于
This patch adds a new mgmt_pair_device which can be used to initiate a dedicated bonding procedure. Some extra callbacks are added to the hci_conn struct so that the pairing code can get notified of the completion of the procedure. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This makes it more convenient to do manipulations on the entry (needed by later commits). Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 2月, 2011 1 次提交
-
-
由 Szymon Janc 提交于
As warned by checkpatch.pl, use #include <linux/uaccess.h> instead of <asm/uaccess.h>. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 2月, 2011 20 次提交
-
-
由 Johan Hedberg 提交于
This patch adds a new set_io_capability management command which is used to set the IO capability for Secure Simple Pairing (SSP) as well as the Security Manager Protocol (SMP). The value is per hci_dev and each hci_conn object inherits it upon creation. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds the necessary commands and events needed to communicate PIN code related actions between the kernel and userspace. This includes a pin_code_request event as well as pin_code_reply and pin_code_negative_reply commands. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
A lot of management code needs to generate command complete events so it makes sense to have a helper function for this. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a get_connections command to the management interface. With this command userspace can get the current list of connected devices. Typically this command would only be used once when enumerating existing adapters. After that the connected and disconnected events are used to track connections. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch add a new connect failed management event to track failures in connecting to remote devices. It is particularly useful for security mode 3 scenarios when we don't have a connected state while pairing but still need to detect when the connect attempt failed. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a disconnect command to the managment interface. Using this command user space is able to force the disconnection of connected devices. The command maps directly to the Disconnect HCI command. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds connected and disconnected managment events to track the connection status to remote devices. The events map directly to successful connection complete and disconnection complete HCI events for ACL links. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a management commands to feed the kernel with all stored link keys as well as remove specific ones or all of them. Once the load_keys command has been called the kernel takes over link key replies. A new_key event is also added to inform userspace of newly created link keys that should be stored permanently. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds the possibility for user space to fully control the Class of Device value of local adapters. To control the service class bits each UUID that's added comes with a service class "hint" which acts as a mask of bits that the UUID needs to have enabled. The set_service_cache management command is used to make sure we queue up all UUID changes as user space initializes its drivers and then send a single HCI_Write_Class_of_Device command when initialization is complete. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds methods to the management interface for userspace to notify the kernel of which services have been registered for specific adapters. This information is needed for setting the appropriate Class of Device value as well as the Extended Inquiry Response value. This patch doesn't actually implement setting of these values but just provides the storage of the UUIDs so the needed functionality can be built on top of it. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch implements a new set_pairable management command to control the pairable state of local adapters. The state is represented using a new HCI_PAIRABLE flag in the hci_dev struct. For backwards compatibility with older user space versions the HCI_PAIRABLE flag gets automatically set when the existence of an adapter is reported to user space through legacy methods and the HCI_MGMT flag is not set. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Several management commands have similar responses but they are not always sent asynchronously. To enable synchronous sending (from the managment command handler function) a send_mode_rsp function is added. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a HCI_MGMT flag to track adapters which are under the control of the management interface. This is needed to make sure that new kernels will work with old user space versions. I.e. behaviour which could break old user space versions (but is needed by the management interface) should not be exhibited when the HCI_MGMT flag is not set. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The powered, connectable and discoverable messages all have the same format. By using a single struct for all of them a lot of code can be simplified and reused. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a set_connectable command as well as a corresponding event to the management interface. It's mainly useful for setting an adapter as connectable from a non-initialized state as well as setting an already initialized adapter as non-connectable (mostly useful for qualification purposes). Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a set_discoverable command to the management interface as well as the corresponding event. The command is used to control the discoverable state of adapters. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a set_powered command to the management interface through which the powered state of local adapters can be controlled. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds support for the powered event that's used to indicate to userspace when the powered state of a local adapter changes. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch implements automatic initialization of basic information about newly registered Bluetooth adapters. E.g. the address and features are always needed so it makes sense for the kernel to automatically power on adapters and read this information. A new HCI_SETUP flag is added to track this state. In order to not consume unnecessary amounts of power if there isn't a user space available that could switch the adapter back off, a timer is added to do this automatically as long as no Bluetooth user space seems to be present. A new HCI_AUTO_OFF flag is added that user space needs to clear to avoid the automatic power off. Additionally, the management interface index_added event is moved to the end of the HCI_SETUP stage so a user space supporting the managment inteface has all the necessary information available for fetching when it gets notified of a new adapter. The HCI_DEV_REG event is kept in the same place as before since existing HCI raw socket based user space versions depend on seeing the kernels initialization sequence (hci_init_req) to determine when the adapter is ready for use. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Jesper Juhl 提交于
If alloc_skb() fails in read_index_list() we'll return -ENOMEM without releasing 'hci_dev_list_lock'. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 23 12月, 2010 5 次提交
-
-
由 Johan Hedberg 提交于
This patch adds Bluetooth Management interface events for controller addition and removal. The events correspond to the existing HCI_DEV_REG and HCI_DEV_UNREG stack internal events. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch implements the read_info command which is used to fetch basic info about an adapter. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch implements the read_index_list command through which userspace can get a list of current adapter indices. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch implements the initial read_version command that userspace will use before any other management interface operations. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The command handlers for bluetooth management messaging should be able to report errors (such as memory allocation failures) to the higher levels in the call stack. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 12月, 2010 1 次提交
-
-
由 Johan Hedberg 提交于
Add initial code for handling Bluetooth Management interface messages. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Acked-by: NAndrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-