- 10 3月, 2010 2 次提交
-
-
由 Johannes Berg 提交于
Updating the variables last_rx_rssi, last_tsf and last_beacon_time needs a lot of code but they are not actually used in iwlagn (only in 3945) so we can move them to the 3945 specific data. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Johannes Berg 提交于
To be obviously correct, this patch only modifies 3945 files and the struct definition. A follow-up patch will create the AGN part of the union. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 20 2月, 2010 1 次提交
-
-
由 Reinette Chatre 提交于
iwl3945 includes iwl-core.h in which these STATUS flags are already defined. This also removes a potential confusing definition with iwlcore using STATUS_MODE_PENDING with value 18 and iwl3945 defining (but not using) STATUS_CONF_PENDING for value 18. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 2月, 2010 1 次提交
-
-
由 Stanislaw Gruszka 提交于
Change pci_alloc_consistent() to dma_alloc_coherent() so we can use GFP_KERNEL flag. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 26 1月, 2010 2 次提交
-
-
由 Reinette Chatre 提交于
Add function pointer for broadcast station addition so that we can call it in from iwlcore at a later time. We only distinguish between iwlagn and iwl3945 broadcast station addition. For the iwl3945 station addition we add that function to iwlcore since that is where most station functionality resides, making it part of iwl3945 will require significant code reorganization that will dilute station management functionality. This seems to be an efficient solution. It may seem as though we are removing error checking when adding the 3945 broadcast station but this error checking was never really necessary since the function returns the station id and the broadcast station id is always set. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Trieu 'Andrew' Nguyen 提交于
We have seen the throughput dropped due to external noisy environment and the radio is out of tune. There are lot of plcp errors indicating this condition. Eventually the station can get de-authenticated by the Access Point. By resetting and tuning the radio, the plcp errors are reduced or eliminated and the throughput starts to rise. To prevent unexpected behavior such as drop in throughput or deauthentication, - The change provides the driver feature to monitor and tune the radio base on the statistics notification from the uCode. - It also allows the setting of the plcp error rate threshold via the plcp_delta under debugfs interface. Signed-off-by: NTrieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 1月, 2010 1 次提交
-
-
由 Reinette Chatre 提交于
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 12月, 2009 1 次提交
-
-
由 Johannes Berg 提交于
This removes the remaining users of the rx status 'qual' field and the field itself. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 12月, 2009 1 次提交
-
-
由 Emese Revfy 提交于
Signed-off-by: NEmese Revfy <re.emese@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 12月, 2009 2 次提交
-
-
由 Reinette Chatre 提交于
we see from http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2125 that power saving does not work well on 3945. Since then power saving has also been connected with association problems where an AP deathenticates a 3945 after it is unable to transmit data to it - this happens when 3945 enters power savings mode. Disable power save support until issues are resolved. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
In iwlwifi, priv->alloc_rxb_page is used to keep track of the Rx pages allocated by the driver. This cleans up the page free routines by introducing __iwl_free_pages/iwl_free_pages so that the accounting is more accurate and less error prone. This also fixes two instances where the counter was not updated. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 11月, 2009 1 次提交
-
-
由 Zhu Yi 提交于
Allocate 128 bytes linear buffer for rx skb. The first 64 bytes is reserved for mac80211 usage (for radiotap header expansion, etc). The frame header starts from the second 64 bytes. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2009 15 次提交
-
-
由 Wey-Yi Guy 提交于
Support "channel switch" request by issue "channel switch" host command to uCode. There is no separated "channel switch" indication from mac80211, when detected "IEEE80211_CONF_CHANGE_CHANNEL" flag in iwl_mac_config(), if the station is in "associated" state, then assume "channel switch announcement" IE was received by mac80211. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
In the paged rx patch (4854fde2), I introduced a bug that could possibly touch an already freed page. It is fixed by avoiding the access in this patch. I've also added some comments so that other people touching the code won't make the same mistake. In the future, if we cannot avoid access the page after being handled to the upper layer, we can use get_page/put_page to handle it. For now, it's just not necessary. It also fixed a debug message print bug reported by Stanislaw Gruszka <sgruszka@redhat.com>. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Detach led background task from statistic notification routine. if led blinking is required; the blink rate is based on the traffic condition. It do not relate to statistics notification. In addition to that, there is not a requirement for statistics notification has to occur all the time. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
Consolidate most iwlXXXX_apm_init() functions into single iwl_apm_init(). Keep iwl3945_apm_init(), but leverage iwl_apm_init() for most functionality. Update 4965 init sequence to follow most recent factory recommendations. Add following members to struct iwl_cfg to guide the init sequence: pll_cfg_val (replaces needs_pll_cfg), set_l0s, use_bsm Move L0S enable/disable from nic_config() functions to iwl_apm_init(). This satisifies the "FIXME: put here L1A -L0S w/a" notice, and complies with factory-recommended sequence. Add debug info message in iwl_apm_init(), and symmetrical message in iwl_apm_stop(). Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Disable the all the tx fifos while stopping the tx queues. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
This switches the iwlwifi driver to use paged skb from linear skb for Rx buffer. So that it relieves some Rx buffer allocation pressure for the memory subsystem. Currently iwlwifi (4K for 3945) requests 8K bytes for Rx buffer. Due to the trailing skb_shared_info in the skb->data, alloc_skb() will do the next order allocation, which is 16K bytes. This is suboptimal and more likely to fail when the system is under memory usage pressure. Switching to paged Rx skb lets us allocate the RXB directly by alloc_pages(), so that only order 1 allocation is required. It also adjusts the area spin_lock (with IRQ disabled) protected in the tasklet because tasklet guarentees to run only on one CPU and the new unprotected code can be preempted by the IRQ handler. This saves us from spawning another workqueue to make skb_linearize/__pskb_pull_tail happy (which cannot be called in hard irq context). Finally, mac80211 doesn't support paged Rx yet. So we linearize the skb for all the management frames and software decryption or defragmentation required data frames before handed to mac80211. For all the other frames, we __pskb_pull_tail 64 bytes in the linear area of the skb for mac80211 to handle them properly. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Rearrange the code and groups setting of retry_limit and data_retry_limits code together. Make 'data_retry_limit' setting similar to iwlwifi for better readability. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Remove the ununsed variable data_retry_limit from priv. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Rename iwl3945_tx_cmd variable tx to tx_cmd for better readability. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
3945 and 4965 share the functionality for setting RTS and CTS to the tx_cmd. Unify these functions and move the common functionality to core. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Adding accumulative statistics counters in iwlwifi driver. Statistics counters are reported by uCode every beacon interval; but can be reset by uCode when needed. The accumulative statistics counters is maintained by driver to keep track of the history of all the counters. Update the ucode stats files in debugfs to display both latest and accumulative counters. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Instead of always allocate the max number of tx queue structure, use dynamic allocation based on the number of queues in device configuration. With these changes, device does not have to allocate more memory than the h/w can support. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
iwl_power_initialize() initializes driver data (not device hardware), and does not need to execute more than once (when the driver initializes). Therefore, it does not belong in iwl3945_apm_init(), which initializes hardware, and may run more than once. Move it to iwl3945_pci_probe(), where it will run only once. This agrees with similar placement in iwl-agn.c's iwl_pci_probe(), although placement under "services" seemed more appropriate than under "mac80211". Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
Clean up device-specific apm_reset() functions and library infrastructure, now that these reset() functions are no longer being used. Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
Update iwl3945_apm_init() to set up device registers in sequence most recently recommended by factory. Add resets for APMG interrupts and radio chip, formerly done only in iwl3945_apm_reset(); moving them here assures that apm_init() will do a complete job of preparing hardware not only after platform boot, but also after apm_stop() has executed (due to rfkill, ifconfig down, driver unload, etc.). This is in preparation to completely remove apm_reset(). Add some comments. Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 10月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
-
- 08 10月, 2009 5 次提交
-
-
由 Abhijeet Kolekar 提交于
Replace iwl_poll_direct_bit with iwl_poll_bit when accessing CSR registers. There is no need to power up the mac to access CSR registers. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NBen M Cahill <ben.m.cahill@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Unify the usage of apm_stop_master and apm_stop across all hardwares. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The iwlwifi drivers have LED blinking requirements that mac80211 cannot fulfill due to the use of just a single LED instead of different ones for TX, RX, radio etc. Instead, the single LED blinks according to transfers and is solid on the rest of the time. As such, having LED class devices registered that mac80211 triggers are connected to is pointless as we don't use the triggers anyway. Remove all the useless code and add hooks into the driver itself. At the same time, make the LED code abstracted so the core code that determines blink rate etc. can be shared between 3945 and agn in iwlcore. At the same time, the fact that we removed the use of the mac80211 LED triggers means we can also remove the IWLWIFI_LEDS Kconfig symbol since the LED support is now self-contained. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Adjust led blink rate to compensate on a MAC Clock difference on every HW. Led blink rate analysis showed an average deviation of 0% on 3945, 5% on 4965 HW and 20% on 5000 series and up. Need to compensate on the led on/off time per HW according to the deviation to achieve the desired led frequency The calculation is: (100-averageDeviation)/100 * blinkTime For code efficiency the calculation will be: compensation = (100 - averageDeviation) * 64 / 100 NewBlinkTime = (compensation * BlinkTime) / 64 Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
Fixes following on big endian systems: CC [M] drivers/net/wireless/iwlwifi/iwl-rx.o drivers/net/wireless/iwlwifi/iwl-rx.c: In function ‘iwl_rx_reply_rx’: drivers/net/wireless/iwlwifi/iwl-rx.c:1029: warning: integer overflow in expression Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Reported-by: NMarcel Holtmann <marcel@holtmann.org> Tested-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 9月, 2009 1 次提交
-
-
由 Reinette Chatre 提交于
When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 8月, 2009 2 次提交
-
-
由 Daniel C Halperin 提交于
The field called 'len' in struct iwl_rx_packet is in fact not just a length field but also includes some flags from the flow handler. In several places throughout the driver, this causes incorrect values to be interpreted as lengths when the field is improperly masked. In most situations the improper use is for debugging output, and simply results in an erroneous message, such as: [551933.070224] ieee80211 phy0: I iwl_rx_statistics Statistics notification received (480 vs -1367342620). which should read '(480 vs 484)'. In at least one case this could case bad things to happen: void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled " "notification for %s:\n", le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd)); iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len) ); } EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif); Given the rampant misuse of this field without proper masking throughout the driver (every use but one), this patch renames the field from 'len' to 'len_n_flags' to reduce confusion. It also adds the proper masking when this field is used as a length value. Signed-off-by: NDaniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel C Halperin 提交于
Green-field mode should be configured in the HT station table. This patch uses both the per-station GF support flag as well as the current BSS HT operation mode (non-GF stations present flag). Added the "ht_greenfield_support" field to struct iwl_cfg to replace the device-specific check in rs_use_green(). That check has been moved to iwlcore_init_ht_hw_capab(). Signed-off-by: NDaniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 8月, 2009 3 次提交
-
-
由 Kalle Valo 提交于
Commit "iwlwifi: Traffic type and counter for debugFs" broke iwl3945 in a case when CONFIG_IWLWIFI_LEDS is disabled: drivers/net/wireless/iwlwifi/iwl-3945.c:580: error: 'hdr' undeclared (first use in this function) Fix it by removing the ifdef check for hdr variable. Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Acked-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Break down the traffic type and counter for both Tx and Rx. Enhance the tx_statistics and rx_statistics debugfs function and move to /sys/kernel/debug/ieee80211/phy0/iwlagn/debug directory to help better debugging both driver and uCode related problems. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
The traffic buffer will only beallocated and used if either bit 23 (IWL_DX_TX) or bit 24 (IWL_DL_RX) of "debug" is set; example: "debug=0x800000" - log tx data traffic "debug=0x1000000" - log rx data traffic "debug=0x1800000" - log both tx and rx traffic The traffic log will store the beginning portion (64 bytes) of the latest 256 of tx and rx packets in the round-robbin buffer for debugging, user can examine the log through debugfs file. How to display the current logged tx/rx traffic and txfifo and rxfifo read/write point: "cat traffic_log" in /sys/kernel/debug/ieee80211/phy0/iwlagn/debug directory By echo "0" to traffic_log file will empty the traffic log buffer and reset both tx and rx taffic log index to 0. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-