No calls for mlx5e_num_channels_changed() out of en_main.c,
turn it static and remove from header.
Keep the wrapper function mlx5e_num_channels_changed_ctx exposed.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NAya Levin <ayal@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

This commit reduces unused variable from MLX5E_MAX_KLM_PER_WQE macro that
introduced by commit d7b896ac ("net/mlx5e: Add support to klm_umr_wqe").
Signed-off-by: NBen Ben-Ishay <benishay@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

In case mlx5_pci_err_detected was called with state equals to
pci_channel_io_perm_failure, the driver will never come back up.

It is nice to know why the driver went to zombie land, so print some
useful information on pci err handlers.
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>
Reviewed-by: NMoshe Shemesh <moshe@nvidia.com>

This code sometimes calls mlx5_sf_hw_table_hwc_init() when "ext_base_id"
is uninitialized.  It's not used on that path, but it generates a static
checker warning to pass uninitialized variables to another function.
It may also generate runtime UBSan  warnings depending on if the
mlx5_sf_hw_table_hwc_init() function is inlined or not.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out'
where 'flow_flag_set(flow, FAILED);' is called.

All but the new error handling paths added by the commits given in the
Fixes tag below.

Fix these error handling paths and branch to 'err_out'.

Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port")
Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 85c5f7c9 ("net/mlx5: E-switch, Create QoS on demand")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The mlx5e_sw_stats structure has grown to the point of triggering
a warning when put on the stack of a function:

mlx5/core/ipoib/ipoib.c: In function 'mlx5i_grp_sw_update_stats':
mlx5/core/ipoib/ipoib.c:136:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

In this case, only five of the structure members are actually set,
so it's sufficient to have those as separate local variables.
As en_rep.c uses 'struct rtnl_link_stats64' for this, just use
the same one here for consistency.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When PSAMPLE is a loadable module, built-in drivers cannot use it:

aarch64-linux-ld: drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.o: in function `mlx5e_tc_sample_skb':
sample.c:(.text+0xd68): undefined reference to `psample_sample_packet'

Add the same dependency here that is used for MLXSW
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and wireguard.

  Mostly scattered driver changes this week, with one big clump in
  mv88e6xxx. Nothing of note, really.

  Current release - regressions:

   - smc: keep smc_close_final()'s error code during active close

  Current release - new code bugs:

   - iwlwifi: various static checker fixes (int overflow, leaks, missing
     error codes)

   - rtw89: fix size of firmware header before transfer, avoid crash

   - mt76: fix timestamp check in tx_status; fix pktid leak;

   - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()

  Previous releases - regressions:

   - smc: fix list corruption in smc_lgr_cleanup_early

   - ipv4: convert fib_num_tclassid_users to atomic_t

  Previous releases - always broken:

   - tls: fix authentication failure in CCM mode

   - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
     incorrect processing

   - dsa: mv88e6xxx: fixes for various device errata

   - rds: correct socket tunable error in rds_tcp_tune()

   - ipv6: fix memory leak in fib6_rule_suppress

   - wireguard: reset peer src endpoint when netns exits

   - wireguard: improve resilience to DoS around incoming handshakes

   - tcp: fix page frag corruption on page fault which involves TCP

   - mpls: fix missing attributes in delete notifications

   - mt7915: fix NULL pointer dereference with ad-hoc mode

  Misc:

   - rt2x00: be more lenient about EPROTO errors during start

   - mlx4_en: update reported link modes for 1/10G"

* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
  net: dsa: b53: Add SPI ID table
  gro: Fix inconsistent indenting
  selftests: net: Correct case name
  net/rds: correct socket tunable error in rds_tcp_tune()
  mctp: Don't let RTM_DELROUTE delete local routes
  net/smc: Keep smc_close_final rc during active close
  ibmvnic: drop bad optimization in reuse_tx_pools()
  ibmvnic: drop bad optimization in reuse_rx_pools()
  net/smc: fix wrong list_del in smc_lgr_cleanup_early
  Fix Comment of ETH_P_802_3_MIN
  ethernet: aquantia: Try MAC address from device tree
  ipv4: convert fib_num_tclassid_users to atomic_t
  net: avoid uninit-value from tcp_conn_request
  net: annotate data-races on txq->xmit_lock_owner
  octeontx2-af: Fix a memleak bug in rvu_mbox_init()
  net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
  vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
  net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
  net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
  net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
  ...

Pull tracing fixes from Steven Rostedt:
 "Three tracing fixes:

   - Allow compares of strings when using signed and unsigned characters

   - Fix kmemleak false positive for histogram entries

   - Handle negative numbers for user defined kretprobe data sizes"

* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kprobes: Limit max data_size of the kretprobe instances
  tracing: Fix a kmemleak false positive in tracing_map
  tracing/histograms: String compares should not care about signed values

Pull IPMI fixes from Corey Minyard:
 "Some changes that went in 5.16 had issues. When working on the design
  a piece was redesigned and things got missed. And the message type was
  not being initialized when it was allocated, resulting in crashes.

  In addition, the IPMI driver has had a shutdown issue where it could
  still have an item in a system workqueue after it had been shutdown.
  Move to a private workqueue to avoid that problem"

* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
  ipmi:ipmb: Fix unknown command response
  ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
  ipmi: fix oob access due to uninit smi_msg type
  ipmi: msghandler: Make symbol 'remove_work_wq' static
  ipmi: Move remove_work to dedicated workqueue

$ ./fcnal-test.sh -t help
Test names: help

Looks it intent to list the available tests but it didn't do the right
thing. I will add another option the do that in the later patch.
Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: NXu Wang <vulab@iscas.ac.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: NXu Wang <vulab@iscas.ac.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: NXu Wang <vulab@iscas.ac.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.

Fixes: 96c8395e ("spi: Revert modalias changes")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The lan966x is using the function 'packing' to create/extract the
information for the IFH, that is used to be added in front of the frames
when they are injected/extracted.
Therefore update the Kconfig to select config option 'PACKING' whenever
lan966x driver is enabled.

Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates the dt-bindings for lan966x switch.
It adds the properties 'additionalProperties' and
'unevaluatedProperties' for ethernet-ports and ports nodes. In this way
it is not possible to add more properties to these nodes.
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of printing numbers of protocol IDs and rammod commands,
enhance debug prints to provide names. s_protocol_types[] and
s_ramrod_cmd_ids arrays[] are added to support along with APIs.
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NAlok Prasad <palok@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliminate the follow smatch warning:

net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent
indenting.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names

Fixes: 34d0302a ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes: 75b2b2b3 ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The blamed commit generates the following smatch static checker warning:

 drivers/net/ethernet/microchip/lan966x/lan966x_main.c:515 lan966x_xtr_irq_handler()
         warn: duplicate check 'sz < 0' (previous on line 502)

This patch fixes this issue removing the duplicate check 'sz < 0'

Fixes: d28d6d2e ("net: lan966x: add port module support")
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would
instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.

Fixes: c6a58ffe ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Signed-off-by: NWilliam Kucharski <william.kucharski@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to test against the existing route type, not
the rtm_type in the netlink request.

Fixes: 83f0a0b7 ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages")
Signed-off-by: NMatt Johnston <matt@codeconstruct.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.

Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.

Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c9 ("net/smc: Ensure the active closing peer first closes clcsock")
Suggested-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NTony Lu <tonylu@linux.alibaba.com>
Reviewed-by: NWen Gu <guwen@linux.alibaba.com>
Acked-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.

But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.

Fixes: bbd80930 ("ibmvnic: Reuse tx pools when possible")
Reported-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: NDany Madden <drt@linux.ibm.com>
Reviewed-by: NRick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.

But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.

Fixes: 489de956 ("ibmvnic: Reuse rx pools when possible")
Reported-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: NDany Madden <drt@linux.ibm.com>
Reviewed-by: NRick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smc_lgr_cleanup_early() meant to delete the link
group from the link group list, but it deleted
the list head by mistake.

This may cause memory corruption since we didn't
remove the real link group from the list and later
memseted the link group structure.
We got a list corruption panic when testing:

[  231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000
[  231.278222] ------------[ cut here ]------------
[  231.278726] kernel BUG at lib/list_debug.c:53!
[  231.279326] invalid opcode: 0000 [#1] SMP NOPTI
[  231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435
[  231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
[  231.281248] Workqueue: events smc_link_down_work
[  231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90
[  231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c
60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f>
0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc
[  231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292
[  231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000
[  231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040
[  231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001
[  231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001
[  231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003
[  231.288337] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[  231.289160] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0
[  231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  231.291940] Call Trace:
[  231.292211]  smc_lgr_terminate_sched+0x53/0xa0
[  231.292677]  smc_switch_conns+0x75/0x6b0
[  231.293085]  ? update_load_avg+0x1a6/0x590
[  231.293517]  ? ttwu_do_wakeup+0x17/0x150
[  231.293907]  ? update_load_avg+0x1a6/0x590
[  231.294317]  ? newidle_balance+0xca/0x3d0
[  231.294716]  smcr_link_down+0x50/0x1a0
[  231.295090]  ? __wake_up_common_lock+0x77/0x90
[  231.295534]  smc_link_down_work+0x46/0x60
[  231.295933]  process_one_work+0x18b/0x350

Fixes: a0a62ee1 ("net/smc: separate locks for SMCD and SMCR link group lists")
Signed-off-by: NDust Li <dust.li@linux.alibaba.com>
Acked-by: NKarsten Graul <kgraul@linux.ibm.com>
Reviewed-by: NTony Lu <tonylu@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The description of ETH_P_802_3_MIN is misleading.
The value of EthernetType in Ethernet II frame is more than 0x0600,
the value of Length in 802.3 frame is less than 0x0600.
Signed-off-by: NXiayu Zhang <Xiayu.Zhang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.

Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.
Signed-off-by: NTianhao Chai <cth451@gmail.com>
Reviewed-by: NIgor Russkikh <irusskikh@marvell.com>
Reviewed-by: NHector Martin <marcan@marcan.st>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean and improve port definition for qca8k documentation by referencing
the dsa generic port definition and adding the additional specific port
definition.
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some switch may require to add additional binding to the node port.
Move DSA generic port definition to a dedicated yaml to permit this.
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before commit faa041a4 ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.

After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.

Fixes: faa041a4 ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: some cleanups for -next

To improve code readability and simplicity, this series add 9 cleanup
patches for the HNS3 ethernet driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently  hns3_get_vector_ring_chain() is a bit long. Refactor it by
extracting sub process to improve the readability.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently  hclge_set_channels() is a bit long. Refactor it by extracting
sub process to improve the readability.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently  hclge_configure() is a bit long. Refactor it by extracting sub
process to improve the readability.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the function hclge_update_port_base_vlan_cfg() is a
bit long. Split it to several small functions, to improve the
readability.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function hns3_nic_net_xmit() is a bit too long. So add a
new function hns3_handle_skb_desc() to simplify code and improve
code readability.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>