Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 05 6月, 2017 4 次提交
  3. 27 5月, 2017 1 次提交
  5. 26 5月, 2017 10 次提交
    • A
      nvme: Quirk APST on Intel 600P/P3100 devices · 50af47d0
      由 Andy Lutomirski 提交于 
      They have known firmware bugs.  A fix is apparently in the works --
once fixed firmware is available, someone from Intel (Hi, Keith!)
can adjust the quirk accordingly.

Cc: stable@vger.kernel.org # v4.11
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      50af47d0
    • C
      nvme: only setup block integrity if supported by the driver · c81bfba9
      由 Christoph Hellwig 提交于 
      Currently only the PCIe driver supports metadata, so we should not claim
integrity support for the other drivers.  This prevents nasty crashes
with targets that advertise metadata support on fabrics.

Also use the opportunity to factor out some code into a separate helper
that isn't even compiled if CONFIG_BLK_DEV_INTEGRITY is disabled.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
      c81bfba9
    • C
      nvme: replace is_flags field in nvme_ctrl_ops with a flags field · d3d5b87d
      由 Christoph Hellwig 提交于 
      So that we can have more flags for transport-specific behavior.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
      d3d5b87d
    • C
      nvme-pci: consistencly use ctrl->device for logging · 9bdcfb10
      由 Christoph Hellwig 提交于 
      This is what most of the code already does and gives much more useful
prefixes than the device embedded in the pci_dev.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
      9bdcfb10
    • N
      bonding: Don't update slave->link until ready to commit · 797a9364
      由 Nithin Sujir 提交于 
      In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.

However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.

This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.

NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.

Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: NNithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      797a9364
    • K
      Input: elan_i2c - ignore signals when finishing updating firmware · a04f1440
      由 KT Liao 提交于 
      Use wait_for_completion_timeout() instead of
wait_for_completion_interruptible_timeout() to avoid stray signals ruining
firmware update. Our timeout is only 300 msec so we are fine simply letting
it expire in case device misbehaves.
Signed-off-by: NKT Liao <kt.liao@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      a04f1440
    • K
      Input: elan_i2c - clear INT before resetting controller · 4b3c7dbb
      由 KT Liao 提交于 
      Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.
Signed-off-by: NKT Liao <kt.liao@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      4b3c7dbb
    • G
      net: fix potential null pointer dereference · 65d786c2
      由 Gustavo A. R. Silva 提交于 
      Add null check to avoid a potential null pointer dereference.

Addresses-Coverity-ID: 1408831
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      65d786c2
    • R
      drm/amdgpu: fix null point error when rmmod amdgpu. · b62ce397
      由 Rex Zhu 提交于 
      this bug happened when amdgpu load failed.

[   75.740951] BUG: unable to handle kernel paging request at 00000000000031c0
[   75.748167] IP: [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
[   75.755774] PGD 0

[   75.759185] Oops: 0000 [#1] SMP
[   75.762408] Modules linked in: amdgpu(OE-) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) intel_rapl(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) snd_hwdep(E) snd_pcm(E) snd_seq_midi(E) coretemp(E) kvm_intel(E) snd_seq_midi_event(E) snd_rawmidi(E) kvm(E) snd_seq(E) joydev(E) snd_seq_device(E) snd_timer(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) mei_me(E) ghash_clmulni_intel(E) snd(E) aesni_intel(E) mei(E) soundcore(E) aes_x86_64(E) shpchp(E) serio_raw(E) lrw(E) acpi_pad(E) gf128mul(E) glue_helper(E) ablk_helper(E) mac_hid(E)
[   75.835574]  cryptd(E) parport_pc(E) ppdev(E) lp(E) nfsd(E) parport(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) mxm_wmi(E) psmouse(E) e1000e(E) ptp(E) pps_core(E) ahci(E) libahci(E) wmi(E) video(E) i2c_hid(E) hid(E)
[   75.858489] CPU: 5 PID: 1603 Comm: rmmod Tainted: G           OE   4.9.0-custom #2
[   75.866183] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 0901 08/31/2015
[   75.875050] task: ffff88045d1bbb80 task.stack: ffffc90002de4000
[   75.881094] RIP: 0010:[<ffffffffa064a0e0>]  [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
[   75.891238] RSP: 0018:ffffc90002de7d48  EFLAGS: 00010286
[   75.896648] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
[   75.903933] RDX: 0000000000000000 RSI: ffff88045d1bbb80 RDI: 0000000000000286
[   75.911183] RBP: ffffc90002de7d50 R08: 0000000000000502 R09: 0000000000000004
[   75.918449] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880464bf0000
[   75.925675] R13: ffffffffa0853000 R14: 0000000000000000 R15: 0000564e44f88210
[   75.932980] FS:  00007f13d5400700(0000) GS:ffff880476540000(0000) knlGS:0000000000000000
[   75.941238] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   75.947088] CR2: 00000000000031c0 CR3: 000000045fd0b000 CR4: 00000000003406e0
[   75.954332] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   75.961566] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   75.968834] Stack:
[   75.970881]  ffff880464bf0000 ffffc90002de7d60 ffffffffa0636592 ffffc90002de7d80
[   75.978454]  ffffffffa059015f ffff880464bf0000 ffff880464bf0000 ffffc90002de7da8
[   75.986076]  ffffffffa0595216 ffff880464bf0000 ffff880460f4d000 ffffffffa0853000
[   75.993692] Call Trace:
[   75.996177]  [<ffffffffa0636592>] amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu]
[   76.003700]  [<ffffffffa059015f>] drm_lastclose+0x2f/0xd0 [drm]
[   76.009777]  [<ffffffffa0595216>] drm_dev_unregister+0x16/0xd0 [drm]
[   76.016255]  [<ffffffffa0595944>] drm_put_dev+0x34/0x70 [drm]
[   76.022139]  [<ffffffffa062f365>] amdgpu_pci_remove+0x15/0x20 [amdgpu]
[   76.028800]  [<ffffffff81416499>] pci_device_remove+0x39/0xc0
[   76.034661]  [<ffffffff81531caa>] __device_release_driver+0x9a/0x140
[   76.041121]  [<ffffffff81531e58>] driver_detach+0xb8/0xc0
[   76.046575]  [<ffffffff81530c95>] bus_remove_driver+0x55/0xd0
[   76.052401]  [<ffffffff815325fc>] driver_unregister+0x2c/0x50
[   76.058244]  [<ffffffff81416289>] pci_unregister_driver+0x29/0x90
[   76.064466]  [<ffffffffa0596c5e>] drm_pci_exit+0x9e/0xb0 [drm]
[   76.070507]  [<ffffffffa0796d71>] amdgpu_exit+0x1c/0x32 [amdgpu]
[   76.076609]  [<ffffffff81104810>] SyS_delete_module+0x1a0/0x200
[   76.082627]  [<ffffffff810e2b1a>] ? rcu_eqs_enter.isra.36+0x4a/0x50
[   76.089001]  [<ffffffff8100392e>] do_syscall_64+0x6e/0x180
[   76.094583]  [<ffffffff817e1d2f>] entry_SYSCALL64_slow_path+0x25/0x25
[   76.101114] Code: 94 c0 c3 31 c0 5d c3 0f 1f 40 00 0f 1f 44 00 00 55 31 c0 48 89 e5 53 48 89 fb 48 c7 c7 1d 21 84 a0 e8 ab 77 b3 e0 e8 fc 8b d7 e0 <48> 8b bb c0 31 00 00 48 85 ff 74 09 e8 ff eb fc ff 85 c0 75 03
[   76.121432] RIP  [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
      b62ce397
    • E
      geneve: fix fill_info when using collect_metadata · 11387fe4
      由 Eric Garver 提交于 
      Since 9b4437a5 ("geneve: Unify LWT and netdev handling.") fill_info
does not return UDP_ZERO_CSUM6_RX when using COLLECT_METADATA. This is
because it uses ip_tunnel_info_af() with the device level info, which is
not valid for COLLECT_METADATA.

Fix by checking for the presence of the actual sockets.

Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: NEric Garver <e@erig.me>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      11387fe4
  7. 25 5月, 2017 15 次提交
  9. 24 5月, 2017 8 次提交
  11. 23 5月, 2017 2 次提交