Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 16 7月, 2017 1 次提交
    • A
      sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}() · b1f5bfc2
      由 Alexander Potapenko 提交于 
      If the length field of the iterator (|pos.p| or |err|) is past the end
of the chunk, we shouldn't access it.

This bug has been detected by KMSAN. For the following pair of system
calls:

  socket(PF_INET6, SOCK_STREAM, 0x84 /* IPPROTO_??? */) = 3
  sendto(3, "A", 1, MSG_OOB, {sa_family=AF_INET6, sin6_port=htons(0),
         inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0,
         sin6_scope_id=0}, 28) = 1

the tool has reported a use of uninitialized memory:

  ==================================================================
  BUG: KMSAN: use of uninitialized memory in sctp_rcv+0x17b8/0x43b0
  CPU: 1 PID: 2940 Comm: probe Not tainted 4.11.0-rc5+ #2926
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
  01/01/2011
  Call Trace:
   <IRQ>
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x172/0x1c0 lib/dump_stack.c:52
   kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927
   __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469
   __sctp_rcv_init_lookup net/sctp/input.c:1074
   __sctp_rcv_lookup_harder net/sctp/input.c:1233
   __sctp_rcv_lookup net/sctp/input.c:1255
   sctp_rcv+0x17b8/0x43b0 net/sctp/input.c:170
   sctp6_rcv+0x32/0x70 net/sctp/ipv6.c:984
   ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279
   NF_HOOK ./include/linux/netfilter.h:257
   ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322
   dst_input ./include/net/dst.h:492
   ip6_rcv_finish net/ipv6/ip6_input.c:69
   NF_HOOK ./include/linux/netfilter.h:257
   ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203
   __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208
   __netif_receive_skb net/core/dev.c:4246
   process_backlog+0x667/0xba0 net/core/dev.c:4866
   napi_poll net/core/dev.c:5268
   net_rx_action+0xc95/0x1590 net/core/dev.c:5333
   __do_softirq+0x485/0x942 kernel/softirq.c:284
   do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
   </IRQ>
   do_softirq kernel/softirq.c:328
   __local_bh_enable_ip+0x25b/0x290 kernel/softirq.c:181
   local_bh_enable+0x37/0x40 ./include/linux/bottom_half.h:31
   rcu_read_unlock_bh ./include/linux/rcupdate.h:931
   ip6_finish_output2+0x19b2/0x1cf0 net/ipv6/ip6_output.c:124
   ip6_finish_output+0x764/0x970 net/ipv6/ip6_output.c:149
   NF_HOOK_COND ./include/linux/netfilter.h:246
   ip6_output+0x456/0x520 net/ipv6/ip6_output.c:163
   dst_output ./include/net/dst.h:486
   NF_HOOK ./include/linux/netfilter.h:257
   ip6_xmit+0x1841/0x1c00 net/ipv6/ip6_output.c:261
   sctp_v6_xmit+0x3b7/0x470 net/sctp/ipv6.c:225
   sctp_packet_transmit+0x38cb/0x3a20 net/sctp/output.c:632
   sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885
   sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750
   sctp_side_effects net/sctp/sm_sideeffect.c:1773
   sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147
   sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88
   sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954
   inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
   sock_sendmsg_nosec net/socket.c:633
   sock_sendmsg net/socket.c:643
   SYSC_sendto+0x608/0x710 net/socket.c:1696
   SyS_sendto+0x8a/0xb0 net/socket.c:1664
   do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285
   entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246
  RIP: 0033:0x401133
  RSP: 002b:00007fff6d99cd38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
  RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401133
  RDX: 0000000000000001 RSI: 0000000000494088 RDI: 0000000000000003
  RBP: 00007fff6d99cd90 R08: 00007fff6d99cd50 R09: 000000000000001c
  R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
  R13: 00000000004063d0 R14: 0000000000406460 R15: 0000000000000000
  origin:
   save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
   kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302
   kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198
   kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:211
   slab_alloc_node mm/slub.c:2743
   __kmalloc_node_track_caller+0x200/0x360 mm/slub.c:4351
   __kmalloc_reserve net/core/skbuff.c:138
   __alloc_skb+0x26b/0x840 net/core/skbuff.c:231
   alloc_skb ./include/linux/skbuff.h:933
   sctp_packet_transmit+0x31e/0x3a20 net/sctp/output.c:570
   sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885
   sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750
   sctp_side_effects net/sctp/sm_sideeffect.c:1773
   sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147
   sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88
   sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954
   inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
   sock_sendmsg_nosec net/socket.c:633
   sock_sendmsg net/socket.c:643
   SYSC_sendto+0x608/0x710 net/socket.c:1696
   SyS_sendto+0x8a/0xb0 net/socket.c:1664
   do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285
   return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246
  ==================================================================
Signed-off-by: NAlexander Potapenko <glider@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b1f5bfc2
  3. 05 7月, 2017 5 次提交
  5. 02 7月, 2017 6 次提交
  7. 21 6月, 2017 1 次提交
  9. 03 6月, 2017 2 次提交
  11. 19 4月, 2017 1 次提交
    • X
      sctp: process duplicated strreset out and addstrm out requests correctly · e4dc99c7
      由 Xin Long 提交于 
      Now sctp stream reconf will process a request again even if it's seqno is
less than asoc->strreset_inseq.

If one request has been done successfully and some data chunks have been
accepted and then a duplicated strreset out request comes, the streamin's
ssn will be cleared. It will cause that stream will never receive chunks
any more because of unsynchronized ssn. It allows a replay attack.

A similar issue also exists when processing addstrm out requests. It will
cause more extra streams being added.

This patch is to fix it by saving the last 2 results into asoc. When a
duplicated strreset out or addstrm out request is received, reply it with
bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the
result saved in asoc if it's seqno >= asoc->strreset_inseq - 2.

Note that it saves last 2 results instead of only last 1 result, because
two requests can be sent together in one chunk.

And note that when receiving a duplicated request, the receiver side will
still reply it even if the peer has received the response. It's safe, As
the response will be dropped by the peer.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e4dc99c7
  13. 05 4月, 2017 1 次提交
  15. 04 4月, 2017 2 次提交
  17. 31 3月, 2017 1 次提交
    • X
      sctp: alloc stream info when initializing asoc · 3dbcc105
      由 Xin Long 提交于 
      When sending a msg without asoc established, sctp will send INIT packet
first and then enqueue chunks.

Before receiving INIT_ACK, stream info is not yet alloced. But enqueuing
chunks needs to access stream info, like out stream state and out stream
cnt.

This patch is to fix it by allocing out stream info when initializing an
asoc, allocing in stream and re-allocing out stream when processing init.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3dbcc105
  19. 29 3月, 2017 1 次提交
    • X
      sctp: change to save MSG_MORE flag into assoc · f9ba3501
      由 Xin Long 提交于 
      David Laight noticed the support for MSG_MORE with datamsg->force_delay
didn't really work as we expected, as the first msg with MSG_MORE set
would always block the following chunks' dequeuing.

This Patch is to rewrite it by saving the MSG_MORE flag into assoc as
David Laight suggested.

asoc->force_delay is used to save MSG_MORE flag before a msg is sent.
All chunks in queue would not be sent out if asoc->force_delay is set
by the msg with MSG_MORE flag, until a new msg without MSG_MORE flag
clears asoc->force_delay.

Note that this change would not affect the flush is generated by other
triggers, like asoc->state != ESTABLISHED, queue size > pmtu etc.

v1->v2:
  Not clear asoc->force_delay after sending the msg with MSG_MORE flag.

Fixes: 4ea0c32f ("sctp: add support for MSG_MORE")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NDavid Laight <david.laight@aculab.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f9ba3501
  21. 23 3月, 2017 1 次提交
  23. 22 3月, 2017 1 次提交
  25. 13 3月, 2017 6 次提交
  27. 10 3月, 2017 1 次提交
    • D
      net: Work around lockdep limitation in sockets that use sockets · cdfbabfb
      由 David Howells 提交于 
      Lockdep issues a circular dependency warning when AFS issues an operation
through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem.

The theory lockdep comes up with is as follows:

 (1) If the pagefault handler decides it needs to read pages from AFS, it
     calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but
     creating a call requires the socket lock:

	mmap_sem must be taken before sk_lock-AF_RXRPC

 (2) afs_open_socket() opens an AF_RXRPC socket and binds it.  rxrpc_bind()
     binds the underlying UDP socket whilst holding its socket lock.
     inet_bind() takes its own socket lock:

	sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET

 (3) Reading from a TCP socket into a userspace buffer might cause a fault
     and thus cause the kernel to take the mmap_sem, but the TCP socket is
     locked whilst doing this:

	sk_lock-AF_INET must be taken before mmap_sem

However, lockdep's theory is wrong in this instance because it deals only
with lock classes and not individual locks.  The AF_INET lock in (2) isn't
really equivalent to the AF_INET lock in (3) as the former deals with a
socket entirely internal to the kernel that never sees userspace.  This is
a limitation in the design of lockdep.

Fix the general case by:

 (1) Double up all the locking keys used in sockets so that one set are
     used if the socket is created by userspace and the other set is used
     if the socket is created by the kernel.

 (2) Store the kern parameter passed to sk_alloc() in a variable in the
     sock struct (sk_kern_sock).  This informs sock_lock_init(),
     sock_init_data() and sk_clone_lock() as to the lock keys to be used.

     Note that the child created by sk_clone_lock() inherits the parent's
     kern setting.

 (3) Add a 'kern' parameter to ->accept() that is analogous to the one
     passed in to ->create() that distinguishes whether kernel_accept() or
     sys_accept4() was the caller and can be passed to sk_alloc().

     Note that a lot of accept functions merely dequeue an already
     allocated socket.  I haven't touched these as the new socket already
     exists before we get the parameter.

     Note also that there are a couple of places where I've made the accepted
     socket unconditionally kernel-based:

	irda_accept()
	rds_rcp_accept_one()
	tcp_accept_from_sock()

     because they follow a sock_create_kern() and accept off of that.

Whilst creating this, I noticed that lustre and ocfs don't create sockets
through sock_create_kern() and thus they aren't marked as for-kernel,
though they appear to be internal.  I wonder if these should do that so
that they use the new set of lock keys.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cdfbabfb
  29. 20 2月, 2017 9 次提交
  31. 10 2月, 2017 1 次提交