During review of git commit cb9c6f15
("xen/spinlock:  Check against default value of -1 for IRQ line.")
Stefano pointed out a bug in the patch. Unfortunatly due to vacation
timing the fix was not applied and this patch fixes it up.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

As it will point to some data, but not event channel data (the
shared_info has an array limited to 32).

This means that for PVHVM guests with more than 32 VCPUs without
the usage of VCPUOP_register_info any interrupts to VCPUs
larger than 32 would have gone unnoticed during early bootup.

That is OK, as during early bootup, in smp_init we end up calling
the hotplug mechanism (xen_hvm_cpu_notify) which makes the
VCPUOP_register_vcpu_info call for all VCPUs and we can receive
interrupts on VCPUs 33 and further.

This is just a cleanup.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

They are important structures and it is not clear at first
look what they are for.

The xen_vcpu is a pointer. By default it points to the shared_info
structure (at the CPU offset location). However if the
VCPUOP_register_vcpu_info hypercall is implemented we can make the
xen_vcpu pointer point to a per-CPU location.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
[v1: Added comments from Ian Campbell]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If a user did:

	echo 0 > /sys/devices/system/cpu/cpu1/online
	echo 1 > /sys/devices/system/cpu/cpu1/online

we would (this a build with DEBUG enabled) get to:
smpboot: ++++++++++++++++++++=_---CPU UP  1
.. snip..
smpboot: Stack at about ffff880074c0ff44
smpboot: CPU1: has booted.

and hang. The RCU mechanism would kick in an try to IPI the CPU1
but the IPIs (and all other interrupts) would never arrive at the
CPU1. At first glance at least. A bit digging in the hypervisor
trace shows that (using xenanalyze):

[vla] d4v1 vec 243 injecting
   0.043163027 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
]  0.043163639 --|x d4v1 vmentry cycles 1468
]  0.043164913 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
   0.043164913 --|x d4v1 inj_virq vec 243  real
  [vla] d4v1 vec 243 injecting
   0.043164913 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
]  0.043165526 --|x d4v1 vmentry cycles 1472
]  0.043166800 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
   0.043166800 --|x d4v1 inj_virq vec 243  real
  [vla] d4v1 vec 243 injecting

there is a pending event (subsequent debugging shows it is the IPI
from the VCPU0 when smpboot.c on VCPU1 has done
"set_cpu_online(smp_processor_id(), true)") and the guest VCPU1 is
interrupted with the callback IPI (0xf3 aka 243) which ends up calling
__xen_evtchn_do_upcall.

The __xen_evtchn_do_upcall seems to do *something* but not acknowledge
the pending events. And the moment the guest does a 'cli' (that is the
ffffffff81673254 in the log above) the hypervisor is invoked again to
inject the IPI (0xf3) to tell the guest it has pending interrupts.
This repeats itself forever.

The culprit was the per_cpu(xen_vcpu, cpu) pointer. At the bootup
we set each per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] but later on use the VCPUOP_register_vcpu_info
to register per-CPU  structures (xen_vcpu_setup).
This is used to allow events for more than 32 VCPUs and for performance
optimizations reasons.

When the user performs the VCPU hotplug we end up calling the
the xen_vcpu_setup once more. We make the hypercall which returns
-EINVAL as it does not allow multiple registration calls (and
already has re-assigned where the events are being set). We pick
the fallback case and set per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] (which is a good fallback during bootup).
However the hypervisor is still setting events in the register
per-cpu structure (per_cpu(xen_vcpu_info, cpu)).

As such when the events are set by the hypervisor (such as timer one),
and when we iterate in __xen_evtchn_do_upcall we end up reading stale
events from the shared_info->vcpu_info[vcpu] instead of the
per_cpu(xen_vcpu_info, cpu) structures. Hence we never acknowledge the
events that the hypervisor has set and the hypervisor keeps on reminding
us to ack the events which we never do.

The fix is simple. Don't on the second time when xen_vcpu_setup is
called over-write the per_cpu(xen_vcpu, cpu) if it points to
per_cpu(xen_vcpu_info).
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The "xen_cpu_die" and "xen_hvm_cpu_die" are very similar.
Lets coalesce them.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There is no need to use the PV version of the IRQ_WORKER mechanism
as under PVHVM we are using the native version. The native
version is using the SMP API.

They just sit around unused:

  69:          0          0  xen-percpu-ipi       irqwork0
  83:          0          0  xen-percpu-ipi       irqwork1
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

See git commit f10cd522
(xen: disable PV spinlocks on HVM) for details.

But we did not disable it everywhere - which means that when
we boot as PVHVM we end up allocating per-CPU irq line for
spinlock. This fixes that.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The default (uninitialized) value of the IRQ line is -1.
Check if we already have allocated an spinlock interrupt line
and if somebody is trying to do it again. Also set it to -1
when we offline the CPU.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If the timer interrupt has been de-init or is just now being
initialized, the default value of -1 should be preset as
interrupt line. Check for that and if something is odd
WARN us.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When we online the CPU, we get this splat:

smpboot: Booting Node 0 Processor 1 APIC 0x2
installing Xen timer for CPU 1
BUG: sleeping function called from invalid context at /home/konrad/ssd/konrad/linux/mm/slab.c:3179
in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1
Pid: 0, comm: swapper/1 Not tainted 3.9.0-rc6upstream-00001-g3884fad #1
Call Trace:
 [<ffffffff810c1fea>] __might_sleep+0xda/0x100
 [<ffffffff81194617>] __kmalloc_track_caller+0x1e7/0x2c0
 [<ffffffff81303758>] ? kasprintf+0x38/0x40
 [<ffffffff813036eb>] kvasprintf+0x5b/0x90
 [<ffffffff81303758>] kasprintf+0x38/0x40
 [<ffffffff81044510>] xen_setup_timer+0x30/0xb0
 [<ffffffff810445af>] xen_hvm_setup_cpu_clockevents+0x1f/0x30
 [<ffffffff81666d0a>] start_secondary+0x19c/0x1a8

The solution to that is use kasprintf in the CPU hotplug path
that 'online's the CPU. That is, do it in in xen_hvm_cpu_notify,
and remove the call to in xen_hvm_setup_cpu_clockevents.

Unfortunatly the later is not a good idea as the bootup path
does not use xen_hvm_cpu_notify so we would end up never allocating
timer%d interrupt lines when booting. As such add the check for
atomic() to continue.

CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

While we don't use the spinlock interrupt line (see for details
commit f10cd522 -
xen: disable PV spinlocks on HVM) - we should still do the proper
init / deinit sequence. We did not do that correctly and for the
CPU init for PVHVM guest we would allocate an interrupt line - but
failed to deallocate the old interrupt line.

This resulted in leakage of an irq_desc but more importantly this splat
as we online an offlined CPU:

genirq: Flags mismatch irq 71. 0002cc20 (spinlock1) vs. 0002cc20 (spinlock1)
Pid: 2542, comm: init.late Not tainted 3.9.0-rc6upstream #1
Call Trace:
 [<ffffffff811156de>] __setup_irq+0x23e/0x4a0
 [<ffffffff81194191>] ? kmem_cache_alloc_trace+0x221/0x250
 [<ffffffff811161bb>] request_threaded_irq+0xfb/0x160
 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20
 [<ffffffff813a8423>] bind_ipi_to_irqhandler+0xa3/0x160
 [<ffffffff81303758>] ? kasprintf+0x38/0x40
 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20
 [<ffffffff810cad35>] ? update_max_interval+0x15/0x40
 [<ffffffff816605db>] xen_init_lock_cpu+0x3c/0x78
 [<ffffffff81660029>] xen_hvm_cpu_notify+0x29/0x33
 [<ffffffff81676bdd>] notifier_call_chain+0x4d/0x70
 [<ffffffff810bb2a9>] __raw_notifier_call_chain+0x9/0x10
 [<ffffffff8109402b>] __cpu_notify+0x1b/0x30
 [<ffffffff8166834a>] _cpu_up+0xa0/0x14b
 [<ffffffff816684ce>] cpu_up+0xd9/0xec
 [<ffffffff8165f754>] store_online+0x94/0xd0
 [<ffffffff8141d15b>] dev_attr_store+0x1b/0x20
 [<ffffffff81218f44>] sysfs_write_file+0xf4/0x170
 [<ffffffff811a2864>] vfs_write+0xb4/0x130
 [<ffffffff811a302a>] sys_write+0x5a/0xa0
 [<ffffffff8167ada9>] system_call_fastpath+0x16/0x1b
cpu 1 spinlock event irq -16
smpboot: Booting Node 0 Processor 1 APIC 0x2

And if one looks at the /proc/interrupts right after
offlining (CPU1):

  70:          0          0  xen-percpu-ipi       spinlock0
  71:          0          0  xen-percpu-ipi       spinlock1
  77:          0          0  xen-percpu-ipi       spinlock2

There is the oddity of the 'spinlock1' still being present.

CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In the PVHVM path when we do CPU online/offline path we would
leak the timer%d IRQ line everytime we do a offline event. The
online path (xen_hvm_setup_cpu_clockevents via
x86_cpuinit.setup_percpu_clockev) would allocate a new interrupt
line for the timer%d.

But we would still use the old interrupt line leading to:

kernel BUG at /home/konrad/ssd/konrad/linux/kernel/hrtimer.c:1261!
invalid opcode: 0000 [#1] SMP
RIP: 0010:[<ffffffff810b9e21>]  [<ffffffff810b9e21>] hrtimer_interrupt+0x261/0x270
.. snip..
 <IRQ>
 [<ffffffff810445ef>] xen_timer_interrupt+0x2f/0x1b0
 [<ffffffff81104825>] ? stop_machine_cpu_stop+0xb5/0xf0
 [<ffffffff8111434c>] handle_irq_event_percpu+0x7c/0x240
 [<ffffffff811175b9>] handle_percpu_irq+0x49/0x70
 [<ffffffff813a74a3>] __xen_evtchn_do_upcall+0x1c3/0x2f0
 [<ffffffff813a760a>] xen_evtchn_do_upcall+0x2a/0x40
 [<ffffffff8167c26d>] xen_hvm_callback_vector+0x6d/0x80
 <EOI>
 [<ffffffff81666d01>] ? start_secondary+0x193/0x1a8
 [<ffffffff81666cfd>] ? start_secondary+0x18f/0x1a8

There is also the oddity (timer1) in the /proc/interrupts after
offlining CPU1:

  64:       1121          0  xen-percpu-virq      timer0
  78:          0          0  xen-percpu-virq      timer1
  84:          0       2483  xen-percpu-virq      timer2

This patch fixes it.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org

For quite a few Xen versions, this wasn't the IRQ vector anymore
anyway, and it is not being used by the kernel for anything. Hence
drop the field from struct irq_info, and respective function
parameters.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

During early setup of a dom0 kernel, populate boot_params with the
Enhanced Disk Drive (EDD) and MBR signature data.  This makes
information on the BIOS boot device available in /sys/firmware/edd/.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Interrupt handlers are always invoked with interrupts disabled, so
remove all uses of the deprecated IRQF_DISABLED flag.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Linux has expected that interrupt handlers are executed with local
interrupts disabled for a while now, so ensure that this is the case on
Alpha even for non-device interrupts such as IPIs.

Without this patch, secondary boot results in the following backtrace:

  warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0()
  trace:
    __local_bh_enable+0xb8/0xd0
    irq_enter+0x74/0xa0
    scheduler_ipi+0x50/0x100
    handle_ipi+0x84/0x260
    do_entint+0x1ac/0x2e0
    irq_exit+0x60/0xa0
    handle_irq+0x98/0x100
    do_entint+0x2c8/0x2e0
    ret_from_sys_call+0x0/0x10
    load_balance+0x3e4/0x870
    cpu_idle+0x24/0x80
    rcu_eqs_enter_common.isra.38+0x0/0x120
    cpu_idle+0x40/0x80
    rest_init+0xc0/0xe0
    _stext+0x1c/0x20

A similar dump occurs if you try to reboot using magic-sysrq.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to all of the goodness being packed into today's kernels, the
resulting image isn't as slim as it once was.

In light of this, don't pass -msmall-data to gcc, which otherwise results
in link failures due to impossible relocations when compiling anything but
the most trivial configurations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Tested-by: NThorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes a NULL pointer dereference at boot on UP1500.

Cc: stable@vger.kernel.org
Reviewed-and-Tested-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NJay Estabrook <jay.estabrook@gmail.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for kvm_gfn_to_hva_cache_init functions for
reads and writes that will cross a page.  If the range falls within
the same memslot, then this will be a fast operation.  If the range
is split between two memslots, then the slower kvm_read_guest and
kvm_write_guest are used.

Tested: Test against kvm_clock unit tests.
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence
their .cmd files don't get included by the build machinery, leading to
the files always getting rebuilt.

Rather than adding the two files individually, take the opportunity and
add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment
at the top of the file to be shrunk quite a bit.

At the same time, remove a pointless flags override line - the variable
assigned to was misspelled anyway, and the options added are
meaningless for assembly sources.

[ hpa: the patch is not minimal, but I am taking it for -urgent anyway
  since the excess impact of the patch seems to be small enough. ]
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
supported its use and no libc was using it, so the entire sa-restorer
functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.]
for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid
accidental reuse of the mask bit.

Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear
sa_restorer on execve] adds code that assumes sa_sigaction has an
sa_restorer field, if SA_RESTORER is defined which would break MIPS.
So remove the SA_RESTORER definition before the v3.8.4 merge.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
(cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8)

The commit a96102be introduced set_isa() where compatible ISA info is
also set aside from the one gets passed in. It means, for example, 1004K
will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like
the following inappropriate:

if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
    c->isa_level == MIPS_CPU_ISA_M32R2 ||
    c->isa_level == MIPS_CPU_ISA_M64R1 ||
    c->isa_level == MIPS_CPU_ISA_M64R2)

This patch fixes it.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Singed-off-by: NEunBong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_SNIPROM was renamed to CONFIG_FW_SNIPROM in v3.8. Let's rename
SNIPROM itself too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org;
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 7517de34 ("MIPS: Alchemy: Redo
PCI as platform driver") added a reference to CONFIG_DEBUG_PCI. Change
it to CONFIG_PCI_DEBUG, as that is a valid Kconfig macro.

Also add a newline to a debugging printk that this fix enables.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 58b69401 [MIPS: Function tracer: Fix broken function tracing]
completely broke the function tracer for 64-bit kernels.  The symptom is
a system hang very early in the boot process.

The fix: Remove/fix $sp adjustments for 64-bit case.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Al Cooper <alcooperx@gmail.com>
Cc: viric@viric.name
Cc: stable@vger.kernel.org # 3.8.x
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix
up the two typos under arch/arm/.

The fix to head.S is slightly scary, but this is just for setting up
an early io-mapping for the serial port when running on a big-endian,
LPAE system. Since these systems don't exist in the wild (at least, I
have no access to one outside of kvmtool, which doesn't provide a serial
port suitable for earlyprintk), then we can revisit the code later if it
causes any problems.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add unwind annotations to the ftrace assembly code so that the function
tracer's stacktracing options (func_stack_trace, etc.) work when
CONFIG_ARM_UNWIND is enabled.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 70264367 ("ARM: 7653/2: do not scale loops_per_jiffy when
using a constant delay clock") fixed a problem with our timer-based
delay loop, where loops_per_jiffy is scaled by cpufreq yet used directly
by the timer delay ops.

This patch fixes the problem in a more elegant way by keeping a private
ticks_per_jiffy field in the delay ops, independent of loops_per_jiffy
and therefore not subject to scaling. The loop-based delay continues to
use loops_per_jiffy directly, as it should.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On Cortex-A15 (r0p0..r3p2) the TLBI/DSB are not adequately shooting down
all use of the old entries. This patch implements the erratum workaround
which consists of:

1. Dummy TLBIMVAIS and DSB on the CPU doing the TLBI operation.
2. Send IPI to the CPUs that are running the same mm (and ASID) as the
   one being invalidated (or all the online CPUs for global pages).
3. CPU receiving the IPI executes a DMB and CLREX (part of the exception
   return code already).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit b8db6b88 (ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache
ctrl) moved the masking of the part ID which caused the RTL version to be
lost. Commit 6248d060 (ARM: 7545/1: cache-l2x0: make outer_cache_fns a
field of l2x0_of_data) changed how .set_debug is initialized. Both commits
break commit 74ddcdb8 (ARM: 7608/1: l2x0: Only set .set_debug
on PL310 r3p0 and earlier) which uses the RTL version to conditionally set
.set_debug function pointer. Commit b8db6b88 also caused the printed cache
ID to be missing the version information.

Fix this by reverting how the part number is masked so the RTL version
info is maintained. The cache-id-part DT property does not set the RTL
bits so masking them should have no effect. Also, re-arrange the order
of the function pointer init so the .set_debug function can be overridden.
Reported-by: NPaolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Jason Cooper reports these build errors:
arch/arm/kernel/built-in.o: In function `iwmmxt_do':
/.../arch/arm/kernel/pj4-cp0.c:36: undefined reference to `iwmmxt_task_release'
/.../arch/arm/kernel/pj4-cp0.c:40: undefined reference to `iwmmxt_task_switch'
make: *** [vmlinux] Error 1

This is caused because the PJ4 code explicitly references the iWMMXt
code, but doesn't require it to be built.  Fix this by ensuring that
iWMMXt is always enabled with PJ4.
Reported-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit fca460f9 simplified the x32
implementation by creating a syscall bitmask, equal to 0x40000000, that
could be applied to x32 syscalls such that the masked syscall number
would be the same as a x86_64 syscall.  While that patch was a nice
way to simplify the code, it went a bit too far by adding the mask to
syscall_get_nr(); returning the masked syscall numbers can cause
confusion with callers that expect syscall numbers matching the x32
ABI, e.g. unmasked syscall numbers.

This patch fixes this by simply removing the mask from syscall_get_nr()
while preserving the other changes from the original commit.  While
there are several syscall_get_nr() callers in the kernel, most simply
check that the syscall number is greater than zero, in this case this
patch will have no effect.  Of those remaining callers, they appear
to be few, seccomp and ftrace, and from my testing of seccomp without
this patch the original commit definitely breaks things; the seccomp
filter does not correctly filter the syscalls due to the difference in
syscall numbers in the BPF filter and the value from syscall_get_nr().
Applying this patch restores the seccomp BPF filter functionality on
x32.

I've tested this patch with the seccomp BPF filters as well as ftrace
and everything looks reasonable to me; needless to say general usage
seemed fine as well.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Link: http://lkml.kernel.org/r/20130215172143.12549.10292.stgit@localhost
Cc: <stable@vger.kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

All architectures need to provide a check_pgt_cache() function. The s390 one
got lost somewhere.
So reintroduce it to prevent future compile errors e.g. if Thomas Gleixner's
idle loop rework patches get merged.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When translating user space addresses to kernel addresses the follow_table()
function had two bugs:

- PROT_NONE mappings could be read accessed via the kernel mapping. That is
  e.g. putting a filename into a user page, then protecting the page with
  PROT_NONE and afterwards issuing the "open" syscall with a pointer to
  the filename would incorrectly succeed.

- when walking the page tables it used the pgd/pud/pmd/pte primitives which
  with dynamic page tables give no indication which real level of page tables
  is being walked (region2, region3, segment or page table). So in case of an
  exception the translation exception code passed to __handle_fault() is not
  necessarily correct.
  This is not really an issue since __handle_fault() doesn't evaluate the code.
  Only in case of e.g. a SIGBUS this code gets passed to user space. If user
  space can do something sane with the value is a different question though.

To fix these issues don't use any Linux primitives. Only walk the page tables
like the hardware would do it, however we leave quite some checks away since
we know that we only have full size page tables and each index is within bounds.

In theory this should fix all issues...
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Since commit 0536bdf3 (ARM: move iotable mappings within the vmalloc
region), the Cavium CNS3xxx cannot boot anymore.

This is caused by the pre-defined iotable mappings is not in the vmalloc
region. This patch move the iotable mappings into the vmalloc region, and
merge the MPCore private memory region (containing the SCU, the GIC and
the TWD) as a single region.
Signed-off-by: NMac Lin <mkl0301@gmail.com>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>
Cc: stable@vger.kernel.org [v3.3+]

The current Tilera boot infrastructure now provides the initramfs
to Linux as a Tilera-hypervisor file named "initramfs", rather than
"initramfs.cpio.gz", as before.  (This makes it reasonable to use
other compression techniques than gzip on the file without having to
worry about the name causing confusion.)  Adapt to use the new name,
but also fall back to checking for the old name.

Cc'ing to stable so that older kernels will remain compatible with
newer Tilera boot infrastructure.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.kernel.org

Commit 3e7fc708 ("ia64 idle: delete pm_idle") in 3.9-rc1 didn't
finish the job, leaving an un-initialized reference to (*idle)().

[ Haven't seen a crash from this - but seems like we are just being
  lucky that "idle" is zero so it does get initialized before we jump to
  randomland  - Len ]
Reported-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous configuration used the wrong "clk" pin.  Without this
change mv_sdio worked because the bootloader would set the pin up, but
with a bootloader that does not set the pin, mv_sdio fails to detect any
card.

I have tested this change using a mwifiex_sdio wireless network adapter
over the SDIO interface.
Signed-off-by: NRyan Press <ryan@presslab.us>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

The crypto functionality in the orion5x dtsi uses the Ethernet IRQ and
so things do not work and there is much grumbling at boot time.
The IRQ for the crypto should be 28, and not 22, and that is what this
patch corrects.
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>