1. 02 9月, 2017 3 次提交
  2. 01 9月, 2017 1 次提交
    • C
      wl1251: add a missing spin_lock_init() · f581a0dd
      Cong Wang 提交于
      wl1251: add a missing spin_lock_init()
      
      This fixes the following kernel warning:
      
       [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745
       [ 5668.771850]  lock: 0xce63ef20, .magic: 00000000, .owner: <none>/-1,
       .owner_cpu: 0
       [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G        W
       4.12.0-03002-gec979a4-dirty #40
       [ 5668.772796] Hardware name: Nokia RX-51 board
       [ 5668.773071] Workqueue: phy1 wl1251_irq_work
       [ 5668.773345] [<c010c9e4>] (unwind_backtrace) from [<c010a274>]
       (show_stack+0x10/0x14)
       [ 5668.773803] [<c010a274>] (show_stack) from [<c01545a4>]
       (do_raw_spin_lock+0x6c/0xa0)
       [ 5668.774230] [<c01545a4>] (do_raw_spin_lock) from [<c06ca578>]
       (_raw_spin_lock_irqsave+0x10/0x18)
       [ 5668.774658] [<c06ca578>] (_raw_spin_lock_irqsave) from [<c048c010>]
       (wl1251_op_tx+0x38/0x5c)
       [ 5668.775115] [<c048c010>] (wl1251_op_tx) from [<c06a12e8>]
       (ieee80211_tx_frags+0x188/0x1c0)
       [ 5668.775543] [<c06a12e8>] (ieee80211_tx_frags) from [<c06a138c>]
       (__ieee80211_tx+0x6c/0x130)
       [ 5668.775970] [<c06a138c>] (__ieee80211_tx) from [<c06a3dbc>]
       (ieee80211_tx+0xdc/0x104)
       [ 5668.776367] [<c06a3dbc>] (ieee80211_tx) from [<c06a4af0>]
       (__ieee80211_subif_start_xmit+0x454/0x8c8)
       [ 5668.776824] [<c06a4af0>] (__ieee80211_subif_start_xmit) from
       [<c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc)
       [ 5668.777343] [<c06a4f94>] (ieee80211_subif_start_xmit) from
       [<c0578848>] (dev_hard_start_xmit+0x80/0x118)
      ...
      
          by adding the missing spin_lock_init().
      Reported-by: NPavel Machek <pavel@ucw.cz>
      Cc: Kalle Valo <kvalo@codeaurora.org>
      Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: NPavel Machek <pavel@ucw.cz>
      Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
      Signed-off-by: NPavel Machek <pavel@ucw.cz>
      Cc: stable@kernel.org
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f581a0dd
  3. 31 8月, 2017 26 次提交
    • F
      Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()" · ebc8254a
      Florian Fainelli 提交于
      This reverts commit 7ad813f2 ("net: phy:
      Correctly process PHY_HALTED in phy_stop_machine()") because it is
      creating the possibility for a NULL pointer dereference.
      
      David Daney provide the following call trace and diagram of events:
      
      When ndo_stop() is called we call:
      
       phy_disconnect()
          +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
          +---> phy_stop_machine()
          |      +---> phy_state_machine()
          |              +----> queue_delayed_work(): Work queued.
          +--->phy_detach() implies: phydev->attached_dev = NULL;
      
      Now at a later time the queued work does:
      
       phy_state_machine()
          +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:
      
       CPU 12 Unable to handle kernel paging request at virtual address
      0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
      Oops[#1]:
      CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
      Workqueue: events_power_efficient phy_state_machine
      task: 80000004021ed100 task.stack: 8000000409d70000
      $ 0   : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
      $ 4   : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
      $ 8   : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
      $12   : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
      $16   : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
      $20   : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
      $24   : 0000000000000061 ffffffff808637b0
      $28   : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
      Hi    : 000000000000002a
      Lo    : 000000000000003f
      epc   : ffffffff80de37ec netif_carrier_off+0xc/0x58
      ra    : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
      Status: 14009ce3        KX SX UX KERNEL EXL IE
      Cause : 00800008 (ExcCode 02)
      BadVA : 0000000000000048
      PrId  : 000d9501 (Cavium Octeon III)
      Modules linked in:
      Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
      task=80000004021ed100, tls=0000000000000000)
      Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
              0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
              80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
              ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
              8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
              ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
              0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
              8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
              8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
              8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
              ...
      Call Trace:
      [<ffffffff80de37ec>] netif_carrier_off+0xc/0x58
      [<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8
      [<ffffffff808a1708>] process_one_work+0x158/0x368
      [<ffffffff808a1ac0>] worker_thread+0x150/0x4c0
      [<ffffffff808a8598>] kthread+0xc8/0xe0
      [<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c
      
      The original motivation for this change originated from Marc Gonzales
      indicating that his network driver did not have its adjust_link callback
      executing with phydev->link = 0 while he was expecting it.
      
      PHYLIB has never made any such guarantees ever because phy_stop() merely just
      tells the workqueue to move into PHY_HALTED state which will happen
      asynchronously.
      Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
      Reported-by: NDavid Daney <ddaney.cavm@gmail.com>
      Fixes: 7ad813f2 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
      Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ebc8254a
    • D
      Merge tag 'mlx5-fixes-2017-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · a1bc54a2
      David S. Miller 提交于
      Saeed Mahameed says:
      
      ====================
      Mellanox, mlx5 fixes 2017-08-30
      
      This series contains some misc fixes to the mlx5 driver.
      
      Please pull and let me know if there's any problem.
      
      For -stable:
      
      Kernels >= 4.12
      	net/mlx5e: Fix CQ moderation mode not set properly
      	net/mlx5e: Don't override user RSS upon set channels
      
      Kernels >= 4.11
      	net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
      
      Kernels >= 4.10
      	net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap
      	net/mlx5e: Check for qos capability in dcbnl_initialize
      
      Kernels >= 4.9
      	net/mlx5e: Fix dangling page pointer on DMA mapping error
      
      Kernels >= 4.8
      	net/mlx5e: Fix inline header size for small packets
      	net/mlx5: E-Switch, Unload the representors in the correct order
          	net/mlx5: Fix arm SRQ command for ISSI version 0
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a1bc54a2
    • F
      net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278 · df191632
      Florian Fainelli 提交于
      BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
      fix that.
      
      Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
      Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      df191632
    • E
      kcm: do not attach PF_KCM sockets to avoid deadlock · 351050ec
      Eric Dumazet 提交于
      syzkaller had no problem to trigger a deadlock, attaching a KCM socket
      to another one (or itself). (original syzkaller report was a very
      confusing lockdep splat during a sendmsg())
      
      It seems KCM claims to only support TCP, but no enforcement is done,
      so we might need to add additional checks.
      
      Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Reported-by: NDmitry Vyukov <dvyukov@google.com>
      Acked-by: NTom Herbert <tom@quantonium.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      351050ec
    • D
      Merge branch 'net-sched-init-failure-fixes' · f5c3dd4b
      David S. Miller 提交于
      Nikolay Aleksandrov says:
      
      ====================
      net/sched: init failure fixes
      
      I went over all qdiscs' init, destroy and reset callbacks and found the
      issues fixed in each patch. Mostly they are null pointer dereferences due
      to uninitialized timer (qdisc watchdog) or double frees due to ->destroy
      cleaning up a second time. There's more information in each patch.
      I've tested these by either sending wrong attributes from user-spaces, no
      attributes or by simulating memory alloc failure where applicable. Also
      tried all of the qdiscs as a default qdisc.
      
      Most of these bugs were present before commit 87b60cfa, I've tried to
      include proper fixes tags in each patch.
      
      I haven't included individual patch acks in the set, I'd appreciate it if
      you take another look and resend them.
      ====================
      Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f5c3dd4b
    • N
      sch_tbf: fix two null pointer dereferences on init failure · c2d6511e
      Nikolay Aleksandrov 提交于
      sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy
      callbacks but it may fail before the timer is initialized due to missing
      options (either not supplied by user-space or set as a default qdisc),
      also q->qdisc is used by ->reset and ->destroy so we need it initialized.
      
      Reproduce:
      $ sysctl net.core.default_qdisc=tbf
      $ ip l set ethX up
      
      Crash log:
      [  959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
      [  959.160323] IP: qdisc_reset+0xa/0x5c
      [  959.160400] PGD 59cdb067
      [  959.160401] P4D 59cdb067
      [  959.160466] PUD 59ccb067
      [  959.160532] PMD 0
      [  959.160597]
      [  959.160706] Oops: 0000 [#1] SMP
      [  959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem
      [  959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62
      [  959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
      [  959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000
      [  959.161263] RIP: 0010:qdisc_reset+0xa/0x5c
      [  959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286
      [  959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000
      [  959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000
      [  959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff
      [  959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0
      [  959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001
      [  959.162546] FS:  00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000
      [  959.162844] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0
      [  959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [  959.163638] Call Trace:
      [  959.163788]  tbf_reset+0x19/0x64 [sch_tbf]
      [  959.163957]  qdisc_destroy+0x8b/0xe5
      [  959.164119]  qdisc_create_dflt+0x86/0x94
      [  959.164284]  ? dev_activate+0x129/0x129
      [  959.164449]  attach_one_default_qdisc+0x36/0x63
      [  959.164623]  netdev_for_each_tx_queue+0x3d/0x48
      [  959.164795]  dev_activate+0x4b/0x129
      [  959.164957]  __dev_open+0xe7/0x104
      [  959.165118]  __dev_change_flags+0xc6/0x15c
      [  959.165287]  dev_change_flags+0x25/0x59
      [  959.165451]  do_setlink+0x30c/0xb3f
      [  959.165613]  ? check_chain_key+0xb0/0xfd
      [  959.165782]  rtnl_newlink+0x3a4/0x729
      [  959.165947]  ? rtnl_newlink+0x117/0x729
      [  959.166121]  ? ns_capable_common+0xd/0xb1
      [  959.166288]  ? ns_capable+0x13/0x15
      [  959.166450]  rtnetlink_rcv_msg+0x188/0x197
      [  959.166617]  ? rcu_read_unlock+0x3e/0x5f
      [  959.166783]  ? rtnl_newlink+0x729/0x729
      [  959.166948]  netlink_rcv_skb+0x6c/0xce
      [  959.167113]  rtnetlink_rcv+0x23/0x2a
      [  959.167273]  netlink_unicast+0x103/0x181
      [  959.167439]  netlink_sendmsg+0x326/0x337
      [  959.167607]  sock_sendmsg_nosec+0x14/0x3f
      [  959.167772]  sock_sendmsg+0x29/0x2e
      [  959.167932]  ___sys_sendmsg+0x209/0x28b
      [  959.168098]  ? do_raw_spin_unlock+0xcd/0xf8
      [  959.168267]  ? _raw_spin_unlock+0x27/0x31
      [  959.168432]  ? __handle_mm_fault+0x651/0xdb1
      [  959.168602]  ? check_chain_key+0xb0/0xfd
      [  959.168773]  __sys_sendmsg+0x45/0x63
      [  959.168934]  ? __sys_sendmsg+0x45/0x63
      [  959.169100]  SyS_sendmsg+0x19/0x1b
      [  959.169260]  entry_SYSCALL_64_fastpath+0x23/0xc2
      [  959.169432] RIP: 0033:0x7fcc5097e690
      [  959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      [  959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690
      [  959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003
      [  959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003
      [  959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006
      [  959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000
      [  959.170900]  ? trace_hardirqs_off_caller+0xa7/0xcf
      [  959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24
      98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89
      e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb
      [  959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610
      [  959.171821] CR2: 0000000000000018
      
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c2d6511e
    • N
      sch_sfq: fix null pointer dereference on init failure · e2326576
      Nikolay Aleksandrov 提交于
      Currently only a memory allocation failure can lead to this, so let's
      initialize the timer first.
      
      Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e2326576
    • N
      sch_netem: avoid null pointer deref on init failure · 634576a1
      Nikolay Aleksandrov 提交于
      netem can fail in ->init due to missing options (either not supplied by
      user-space or used as a default qdisc) causing a timer->base null
      pointer deref in its ->destroy() and ->reset() callbacks.
      
      Reproduce:
      $ sysctl net.core.default_qdisc=netem
      $ ip l set ethX up
      
      Crash log:
      [ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null)
      [ 1814.847181] IP: hrtimer_active+0x17/0x8a
      [ 1814.847270] PGD 59c34067
      [ 1814.847271] P4D 59c34067
      [ 1814.847337] PUD 37374067
      [ 1814.847403] PMD 0
      [ 1814.847468]
      [ 1814.847582] Oops: 0000 [#1] SMP
      [ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O)
      [ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G           O 4.13.0-rc6+ #62
      [ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
      [ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000
      [ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a
      [ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246
      [ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000
      [ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8
      [ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff
      [ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000
      [ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001
      [ 1814.849616] FS:  00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
      [ 1814.849919] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0
      [ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [ 1814.850723] Call Trace:
      [ 1814.850875]  hrtimer_try_to_cancel+0x1a/0x93
      [ 1814.851047]  hrtimer_cancel+0x15/0x20
      [ 1814.851211]  qdisc_watchdog_cancel+0x12/0x14
      [ 1814.851383]  netem_reset+0xe6/0xed [sch_netem]
      [ 1814.851561]  qdisc_destroy+0x8b/0xe5
      [ 1814.851723]  qdisc_create_dflt+0x86/0x94
      [ 1814.851890]  ? dev_activate+0x129/0x129
      [ 1814.852057]  attach_one_default_qdisc+0x36/0x63
      [ 1814.852232]  netdev_for_each_tx_queue+0x3d/0x48
      [ 1814.852406]  dev_activate+0x4b/0x129
      [ 1814.852569]  __dev_open+0xe7/0x104
      [ 1814.852730]  __dev_change_flags+0xc6/0x15c
      [ 1814.852899]  dev_change_flags+0x25/0x59
      [ 1814.853064]  do_setlink+0x30c/0xb3f
      [ 1814.853228]  ? check_chain_key+0xb0/0xfd
      [ 1814.853396]  ? check_chain_key+0xb0/0xfd
      [ 1814.853565]  rtnl_newlink+0x3a4/0x729
      [ 1814.853728]  ? rtnl_newlink+0x117/0x729
      [ 1814.853905]  ? ns_capable_common+0xd/0xb1
      [ 1814.854072]  ? ns_capable+0x13/0x15
      [ 1814.854234]  rtnetlink_rcv_msg+0x188/0x197
      [ 1814.854404]  ? rcu_read_unlock+0x3e/0x5f
      [ 1814.854572]  ? rtnl_newlink+0x729/0x729
      [ 1814.854737]  netlink_rcv_skb+0x6c/0xce
      [ 1814.854902]  rtnetlink_rcv+0x23/0x2a
      [ 1814.855064]  netlink_unicast+0x103/0x181
      [ 1814.855230]  netlink_sendmsg+0x326/0x337
      [ 1814.855398]  sock_sendmsg_nosec+0x14/0x3f
      [ 1814.855584]  sock_sendmsg+0x29/0x2e
      [ 1814.855747]  ___sys_sendmsg+0x209/0x28b
      [ 1814.855912]  ? do_raw_spin_unlock+0xcd/0xf8
      [ 1814.856082]  ? _raw_spin_unlock+0x27/0x31
      [ 1814.856251]  ? __handle_mm_fault+0x651/0xdb1
      [ 1814.856421]  ? check_chain_key+0xb0/0xfd
      [ 1814.856592]  __sys_sendmsg+0x45/0x63
      [ 1814.856755]  ? __sys_sendmsg+0x45/0x63
      [ 1814.856923]  SyS_sendmsg+0x19/0x1b
      [ 1814.857083]  entry_SYSCALL_64_fastpath+0x23/0xc2
      [ 1814.857256] RIP: 0033:0x7f733b2dd690
      [ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      [ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690
      [ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003
      [ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003
      [ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002
      [ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000
      [ 1814.859267]  ? trace_hardirqs_off_caller+0xa7/0xcf
      [ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3
      31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b
      45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89
      [ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590
      [ 1814.860214] CR2: 0000000000000000
      
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      634576a1
    • N
      sch_fq_codel: avoid double free on init failure · 30c31d74
      Nikolay Aleksandrov 提交于
      It is very unlikely to happen but the backlogs memory allocation
      could fail and will free q->flows, but then ->destroy() will free
      q->flows too. For correctness remove the first free and let ->destroy
      clean up.
      
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      30c31d74
    • N
      sch_cbq: fix null pointer dereferences on init failure · 3501d059
      Nikolay Aleksandrov 提交于
      CBQ can fail on ->init by wrong nl attributes or simply for missing any,
      f.e. if it's set as a default qdisc then TCA_OPTIONS (opt) will be NULL
      when it is activated. The first thing init does is parse opt but it will
      dereference a null pointer if used as a default qdisc, also since init
      failure at default qdisc invokes ->reset() which cancels all timers then
      we'll also dereference two more null pointers (timer->base) as they were
      never initialized.
      
      To reproduce:
      $ sysctl net.core.default_qdisc=cbq
      $ ip l set ethX up
      
      Crash log of the first null ptr deref:
      [44727.907454] BUG: unable to handle kernel NULL pointer dereference at (null)
      [44727.907600] IP: cbq_init+0x27/0x205
      [44727.907676] PGD 59ff4067
      [44727.907677] P4D 59ff4067
      [44727.907742] PUD 59c70067
      [44727.907807] PMD 0
      [44727.907873]
      [44727.907982] Oops: 0000 [#1] SMP
      [44727.908054] Modules linked in:
      [44727.908126] CPU: 1 PID: 21312 Comm: ip Not tainted 4.13.0-rc6+ #60
      [44727.908235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
      [44727.908477] task: ffff88005ad42700 task.stack: ffff880037214000
      [44727.908672] RIP: 0010:cbq_init+0x27/0x205
      [44727.908838] RSP: 0018:ffff8800372175f0 EFLAGS: 00010286
      [44727.909018] RAX: ffffffff816c3852 RBX: ffff880058c53800 RCX: 0000000000000000
      [44727.909222] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff8800372175f8
      [44727.909427] RBP: ffff880037217650 R08: ffffffff81b0f380 R09: 0000000000000000
      [44727.909631] R10: ffff880037217660 R11: 0000000000000020 R12: ffffffff822a44c0
      [44727.909835] R13: ffff880058b92000 R14: 00000000ffffffff R15: 0000000000000001
      [44727.910040] FS:  00007ff8bc583740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000
      [44727.910339] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [44727.910525] CR2: 0000000000000000 CR3: 00000000371e5000 CR4: 00000000000406e0
      [44727.910731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [44727.910936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [44727.911141] Call Trace:
      [44727.911291]  ? lockdep_init_map+0xb6/0x1ba
      [44727.911461]  ? qdisc_alloc+0x14e/0x187
      [44727.911626]  qdisc_create_dflt+0x7a/0x94
      [44727.911794]  ? dev_activate+0x129/0x129
      [44727.911959]  attach_one_default_qdisc+0x36/0x63
      [44727.912132]  netdev_for_each_tx_queue+0x3d/0x48
      [44727.912305]  dev_activate+0x4b/0x129
      [44727.912468]  __dev_open+0xe7/0x104
      [44727.912631]  __dev_change_flags+0xc6/0x15c
      [44727.912799]  dev_change_flags+0x25/0x59
      [44727.912966]  do_setlink+0x30c/0xb3f
      [44727.913129]  ? check_chain_key+0xb0/0xfd
      [44727.913294]  ? check_chain_key+0xb0/0xfd
      [44727.913463]  rtnl_newlink+0x3a4/0x729
      [44727.913626]  ? rtnl_newlink+0x117/0x729
      [44727.913801]  ? ns_capable_common+0xd/0xb1
      [44727.913968]  ? ns_capable+0x13/0x15
      [44727.914131]  rtnetlink_rcv_msg+0x188/0x197
      [44727.914300]  ? rcu_read_unlock+0x3e/0x5f
      [44727.914465]  ? rtnl_newlink+0x729/0x729
      [44727.914630]  netlink_rcv_skb+0x6c/0xce
      [44727.914796]  rtnetlink_rcv+0x23/0x2a
      [44727.914956]  netlink_unicast+0x103/0x181
      [44727.915122]  netlink_sendmsg+0x326/0x337
      [44727.915291]  sock_sendmsg_nosec+0x14/0x3f
      [44727.915459]  sock_sendmsg+0x29/0x2e
      [44727.915619]  ___sys_sendmsg+0x209/0x28b
      [44727.915784]  ? do_raw_spin_unlock+0xcd/0xf8
      [44727.915954]  ? _raw_spin_unlock+0x27/0x31
      [44727.916121]  ? __handle_mm_fault+0x651/0xdb1
      [44727.916290]  ? check_chain_key+0xb0/0xfd
      [44727.916461]  __sys_sendmsg+0x45/0x63
      [44727.916626]  ? __sys_sendmsg+0x45/0x63
      [44727.916792]  SyS_sendmsg+0x19/0x1b
      [44727.916950]  entry_SYSCALL_64_fastpath+0x23/0xc2
      [44727.917125] RIP: 0033:0x7ff8bbc96690
      [44727.917286] RSP: 002b:00007ffc360991e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      [44727.917579] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007ff8bbc96690
      [44727.917783] RDX: 0000000000000000 RSI: 00007ffc36099230 RDI: 0000000000000003
      [44727.917987] RBP: ffff880037217f98 R08: 0000000000000001 R09: 0000000000000003
      [44727.918190] R10: 00007ffc36098fb0 R11: 0000000000000246 R12: 0000000000000006
      [44727.918393] R13: 000000000066f1a0 R14: 00007ffc360a12e0 R15: 0000000000000000
      [44727.918597]  ? trace_hardirqs_off_caller+0xa7/0xcf
      [44727.918774] Code: 41 5f 5d c3 66 66 66 66 90 55 48 8d 56 04 45 31 c9
      49 c7 c0 80 f3 b0 81 48 89 e5 41 55 41 54 53 48 89 fb 48 8d 7d a8 48 83
      ec 48 <0f> b7 0e be 07 00 00 00 83 e9 04 e8 e6 f7 d8 ff 85 c0 0f 88 bb
      [44727.919332] RIP: cbq_init+0x27/0x205 RSP: ffff8800372175f0
      [44727.919516] CR2: 0000000000000000
      
      Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3501d059
    • N
      sch_hfsc: fix null pointer deref and double free on init failure · 3bdac362
      Nikolay Aleksandrov 提交于
      Depending on where ->init fails we can get a null pointer deref due to
      uninitialized hires timer (watchdog) or a double free of the qdisc hash
      because it is already freed by ->destroy().
      
      Fixes: 8d553738 ("net/sched/hfsc: allocate tcf block for hfsc root class")
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3bdac362
    • N
      sch_hhf: fix null pointer dereference on init failure · 32db864d
      Nikolay Aleksandrov 提交于
      If sch_hhf fails in its ->init() function (either due to wrong
      user-space arguments as below or memory alloc failure of hh_flows) it
      will do a null pointer deref of q->hh_flows in its ->destroy() function.
      
      To reproduce the crash:
      $ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000
      
      Crash log:
      [  690.654882] BUG: unable to handle kernel NULL pointer dereference at (null)
      [  690.655565] IP: hhf_destroy+0x48/0xbc
      [  690.655944] PGD 37345067
      [  690.655948] P4D 37345067
      [  690.656252] PUD 58402067
      [  690.656554] PMD 0
      [  690.656857]
      [  690.657362] Oops: 0000 [#1] SMP
      [  690.657696] Modules linked in:
      [  690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57
      [  690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
      [  690.659255] task: ffff880058578000 task.stack: ffff88005acbc000
      [  690.659747] RIP: 0010:hhf_destroy+0x48/0xbc
      [  690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246
      [  690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000
      [  690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0
      [  690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000
      [  690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea
      [  690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000
      [  690.663769] FS:  00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
      [  690.667069] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0
      [  690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [  690.671003] Call Trace:
      [  690.671743]  qdisc_create+0x377/0x3fd
      [  690.672534]  tc_modify_qdisc+0x4d2/0x4fd
      [  690.673324]  rtnetlink_rcv_msg+0x188/0x197
      [  690.674204]  ? rcu_read_unlock+0x3e/0x5f
      [  690.675091]  ? rtnl_newlink+0x729/0x729
      [  690.675877]  netlink_rcv_skb+0x6c/0xce
      [  690.676648]  rtnetlink_rcv+0x23/0x2a
      [  690.677405]  netlink_unicast+0x103/0x181
      [  690.678179]  netlink_sendmsg+0x326/0x337
      [  690.678958]  sock_sendmsg_nosec+0x14/0x3f
      [  690.679743]  sock_sendmsg+0x29/0x2e
      [  690.680506]  ___sys_sendmsg+0x209/0x28b
      [  690.681283]  ? __handle_mm_fault+0xc7d/0xdb1
      [  690.681915]  ? check_chain_key+0xb0/0xfd
      [  690.682449]  __sys_sendmsg+0x45/0x63
      [  690.682954]  ? __sys_sendmsg+0x45/0x63
      [  690.683471]  SyS_sendmsg+0x19/0x1b
      [  690.683974]  entry_SYSCALL_64_fastpath+0x23/0xc2
      [  690.684516] RIP: 0033:0x7f8ae529d690
      [  690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      [  690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690
      [  690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003
      [  690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000
      [  690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002
      [  690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000
      [  690.688475]  ? trace_hardirqs_off_caller+0xa7/0xcf
      [  690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83
      c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02
      00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1
      [  690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0
      [  690.690636] CR2: 0000000000000000
      
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      32db864d
    • N
      sch_multiq: fix double free on init failure · e89d469e
      Nikolay Aleksandrov 提交于
      The below commit added a call to ->destroy() on init failure, but multiq
      still frees ->queues on error in init, but ->queues is also freed by
      ->destroy() thus we get double free and corrupted memory.
      
      Very easy to reproduce (eth0 not multiqueue):
      $ tc qdisc add dev eth0 root multiq
      RTNETLINK answers: Operation not supported
      $ ip l add dumdum type dummy
      (crash)
      
      Trace log:
      [ 3929.467747] general protection fault: 0000 [#1] SMP
      [ 3929.468083] Modules linked in:
      [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56
      [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
      [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000
      [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be
      [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246
      [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df
      [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020
      [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000
      [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564
      [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00
      [ 3929.471869] FS:  00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
      [ 3929.472286] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0
      [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [ 3929.474873] Call Trace:
      [ 3929.475337]  ? kstrdup_const+0x23/0x25
      [ 3929.475863]  kstrdup+0x2e/0x4b
      [ 3929.476338]  kstrdup_const+0x23/0x25
      [ 3929.478084]  __kernfs_new_node+0x28/0xbc
      [ 3929.478478]  kernfs_new_node+0x35/0x55
      [ 3929.478929]  kernfs_create_link+0x23/0x76
      [ 3929.479478]  sysfs_do_create_link_sd.isra.2+0x85/0xd7
      [ 3929.480096]  sysfs_create_link+0x33/0x35
      [ 3929.480649]  device_add+0x200/0x589
      [ 3929.481184]  netdev_register_kobject+0x7c/0x12f
      [ 3929.481711]  register_netdevice+0x373/0x471
      [ 3929.482174]  rtnl_newlink+0x614/0x729
      [ 3929.482610]  ? rtnl_newlink+0x17f/0x729
      [ 3929.483080]  rtnetlink_rcv_msg+0x188/0x197
      [ 3929.483533]  ? rcu_read_unlock+0x3e/0x5f
      [ 3929.483984]  ? rtnl_newlink+0x729/0x729
      [ 3929.484420]  netlink_rcv_skb+0x6c/0xce
      [ 3929.484858]  rtnetlink_rcv+0x23/0x2a
      [ 3929.485291]  netlink_unicast+0x103/0x181
      [ 3929.485735]  netlink_sendmsg+0x326/0x337
      [ 3929.486181]  sock_sendmsg_nosec+0x14/0x3f
      [ 3929.486614]  sock_sendmsg+0x29/0x2e
      [ 3929.486973]  ___sys_sendmsg+0x209/0x28b
      [ 3929.487340]  ? do_raw_spin_unlock+0xcd/0xf8
      [ 3929.487719]  ? _raw_spin_unlock+0x27/0x31
      [ 3929.488092]  ? __handle_mm_fault+0x651/0xdb1
      [ 3929.488471]  ? check_chain_key+0xb0/0xfd
      [ 3929.488847]  __sys_sendmsg+0x45/0x63
      [ 3929.489206]  ? __sys_sendmsg+0x45/0x63
      [ 3929.489576]  SyS_sendmsg+0x19/0x1b
      [ 3929.489901]  entry_SYSCALL_64_fastpath+0x23/0xc2
      [ 3929.490172] RIP: 0033:0x7f0b6fb93690
      [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690
      [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003
      [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000
      [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002
      [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000
      [ 3929.492352]  ? trace_hardirqs_off_caller+0xa7/0xcf
      [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44
      89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d
      8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01
      [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0
      
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Fixes: f07d1501 ("multiq: Further multiqueue cleanup")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e89d469e
    • N
      sch_htb: fix crash on init failure · 88c2ace6
      Nikolay Aleksandrov 提交于
      The commit below added a call to the ->destroy() callback for all qdiscs
      which failed in their ->init(), but some were not prepared for such
      change and can't handle partially initialized qdisc. HTB is one of them
      and if any error occurs before the qdisc watchdog timer and qdisc work are
      initialized then we can hit either a null ptr deref (timer->base) when
      canceling in ->destroy or lockdep error info about trying to register
      a non-static key and a stack dump. So to fix these two move the watchdog
      timer and workqueue init before anything that can err out.
      To reproduce userspace needs to send broken htb qdisc create request,
      tested with a modified tc (q_htb.c).
      
      Trace log:
      [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null)
      [ 2710.897977] IP: hrtimer_active+0x17/0x8a
      [ 2710.898174] PGD 58fab067
      [ 2710.898175] P4D 58fab067
      [ 2710.898353] PUD 586c0067
      [ 2710.898531] PMD 0
      [ 2710.898710]
      [ 2710.899045] Oops: 0000 [#1] SMP
      [ 2710.899232] Modules linked in:
      [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54
      [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
      [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000
      [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a
      [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246
      [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000
      [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298
      [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001
      [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000
      [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0
      [ 2710.901907] FS:  00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000
      [ 2710.902277] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0
      [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [ 2710.903180] Call Trace:
      [ 2710.903332]  hrtimer_try_to_cancel+0x1a/0x93
      [ 2710.903504]  hrtimer_cancel+0x15/0x20
      [ 2710.903667]  qdisc_watchdog_cancel+0x12/0x14
      [ 2710.903866]  htb_destroy+0x2e/0xf7
      [ 2710.904097]  qdisc_create+0x377/0x3fd
      [ 2710.904330]  tc_modify_qdisc+0x4d2/0x4fd
      [ 2710.904511]  rtnetlink_rcv_msg+0x188/0x197
      [ 2710.904682]  ? rcu_read_unlock+0x3e/0x5f
      [ 2710.904849]  ? rtnl_newlink+0x729/0x729
      [ 2710.905017]  netlink_rcv_skb+0x6c/0xce
      [ 2710.905183]  rtnetlink_rcv+0x23/0x2a
      [ 2710.905345]  netlink_unicast+0x103/0x181
      [ 2710.905511]  netlink_sendmsg+0x326/0x337
      [ 2710.905679]  sock_sendmsg_nosec+0x14/0x3f
      [ 2710.905847]  sock_sendmsg+0x29/0x2e
      [ 2710.906010]  ___sys_sendmsg+0x209/0x28b
      [ 2710.906176]  ? do_raw_spin_unlock+0xcd/0xf8
      [ 2710.906346]  ? _raw_spin_unlock+0x27/0x31
      [ 2710.906514]  ? __handle_mm_fault+0x651/0xdb1
      [ 2710.906685]  ? check_chain_key+0xb0/0xfd
      [ 2710.906855]  __sys_sendmsg+0x45/0x63
      [ 2710.907018]  ? __sys_sendmsg+0x45/0x63
      [ 2710.907185]  SyS_sendmsg+0x19/0x1b
      [ 2710.907344]  entry_SYSCALL_64_fastpath+0x23/0xc2
      
      Note that probably this bug goes further back because the default qdisc
      handling always calls ->destroy on init failure too.
      
      Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
      Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
      Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      88c2ace6
    • T
      net/mlx5e: Fix CQ moderation mode not set properly · 1213ad28
      Tal Gilboa 提交于
      cq_period_mode assignment was mistakenly removed so it was always set to "0",
      which is EQE based moderation, regardless of the device CAPs and
      requested value in ethtool.
      
      Fixes: 6a9764ef ("net/mlx5e: Isolate open_channels from priv->params")
      Signed-off-by: NTal Gilboa <talgi@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      1213ad28
    • M
      net/mlx5e: Fix inline header size for small packets · 6aace17e
      Moshe Shemesh 提交于
      Fix inline header size, make sure it is not greater than skb len.
      This bug effects small packets, for example L2 packets with size < 18.
      
      Fixes: ae76715d ("net/mlx5e: Check the minimum inline header mode before xmit")
      Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      6aace17e
    • S
      net/mlx5: E-Switch, Unload the representors in the correct order · 19122039
      Shahar Klein 提交于
      When changing from switchdev to legacy mode, all the representor port
      devices (uplink nic and reps) are cleaned up. Part of this cleaning
      process is removing the neigh entries and the hash table containing them.
      However, a representor neigh entry might be linked to the uplink port
      hash table and if the uplink nic is cleaned first the cleaning of the
      representor will end up in null deref.
      Fix that by unloading the representors in the opposite order of load.
      
      Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors")
      Signed-off-by: NShahar Klein <shahark@mellanox.com>
      Reviewed-by: NRoi Dayan <roid@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      19122039
    • P
      net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address · 08820528
      Paul Blakey 提交于
      Currently if vxlan tunnel ipv6 src isn't supplied the driver fails to
      resolve it as part of the route lookup. The resulting encap header
      is left with a zeroed out ipv6 src address so the packets are sent
      with this src ip.
      
      Use an appropriate route lookup API that also resolves the source
      ipv6 address if it's not supplied.
      
      Fixes: ce99f6b9 ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels')
      Signed-off-by: NPaul Blakey <paulb@mellanox.com>
      Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Reviewed-by: NRoi Dayan <roid@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      08820528
    • I
      net/mlx5e: Don't override user RSS upon set channels · 5a8e1267
      Inbar Karmy 提交于
      Currently, increasing the number of combined channels is changing
      the RSS spread to use the new created channels.
      Prevent the RSS spread change in case the user explicitly declare it,
      to avoid overriding user configuration.
      
      Tested:
      when RSS default:
      
      # ethtool -L ens8 combined 4
      RSS spread will change and point to 4 channels.
      
      # ethtool -X ens8 equal 4
      # ethtool -L ens8 combined 6
      RSS will not change after increasing the number of the channels.
      
      Fixes: 8bf36862 ('ethtool: ensure channel counts are within bounds during SCHANNELS')
      Signed-off-by: NInbar Karmy <inbark@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      5a8e1267
    • E
      net/mlx5e: Fix dangling page pointer on DMA mapping error · 0556ce72
      Eran Ben Elisha 提交于
      Function mlx5e_dealloc_rx_wqe is using page pointer value as an
      indication to valid DMA mapping. In case that the mapping failed, we
      released the page but kept the dangling pointer. Store the page pointer
      only after the DMA mapping passed to avoid invalid page DMA unmap.
      
      Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
      Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      0556ce72
    • H
      net/mlx5: Remove the flag MLX5_INTERFACE_STATE_SHUTDOWN · 10a8d007
      Huy Nguyen 提交于
      MLX5_INTERFACE_STATE_SHUTDOWN is not used in the code.
      
      Fixes: 5fc7197d ("net/mlx5: Add pci shutdown callback")
      Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
      Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      10a8d007
    • H
      net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails · b3cb5388
      Huy Nguyen 提交于
      There is an issue where the firmware fails during mlx5_load_one,
      the health_care timer detects the issue and schedules a health_care call.
      Then the mlx5_load_one detects the issue, cleans up and quits. Then
      the health_care starts and calls mlx5_unload_one to clean up the resources
      that no longer exist and causes kernel panic.
      
      The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
      after mlx5_load_one fails. The solution is removing the bit
      MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
      bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
      is redundant and we can use MLX5_INTERFACE_STATE_UP instead.
      
      Fixes: 5fc7197d ("net/mlx5: Add pci shutdown callback")
      Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
      Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      b3cb5388
    • N
      net/mlx5: Fix arm SRQ command for ISSI version 0 · 672d0880
      Noa Osherovich 提交于
      Support for ISSI version 0 was recently broken as the arm_srq_cmd
      command, which is used only for ISSI version 0, was given the opcode
      for ISSI version 1 instead of ISSI version 0.
      
      Change arm_srq_cmd to use the correct command opcode for ISSI version
      0.
      
      Fixes: af1ba291 ('{net, IB}/mlx5: Refactor internal SRQ API')
      Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      672d0880
    • H
      net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap. · 9e10bf1d
      Huy Nguyen 提交于
      Current code doesn't report DCB_CAP_DCBX_HOST capability when query
      through getcap. User space lldptool expects capability to have HOST mode
      set when it wants to configure DCBX CEE mode. In absence of HOST mode
      capability, lldptool fails to switch to CEE mode.
      
      This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX
      controlled mode is under software control.
      
      Fixes: 3a6a931d ("net/mlx5e: Support DCBX CEE API")
      Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
      Reviewed-by: NParav Pandit <parav@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      9e10bf1d
    • H
      net/mlx5e: Check for qos capability in dcbnl_initialize · 33c52b67
      Huy Nguyen 提交于
      qos capability is the master capability bit that determines
      if the DCBX is supported for the PCI function. If this bit is off,
      driver cannot run any dcbx code.
      
      Fixes: e207b7e9 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
      Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
      Reviewed-by: NParav Pandit <parav@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      33c52b67
    • S
      net: ti: cpsw-common: dont print error if ti_cm_get_macid() fails · f0e82d73
      Sekhar Nori 提交于
      It is quite common for ti_cm_get_macid() to fail on some of the
      platforms it is invoked on. They include any platform where
      mac address is not part of SoC register space.
      
      On these platforms, mac address is read and populated in
      device-tree by bootloader. An example is TI DA850.
      
      Downgrade the severity of message to "information", so it does
      not spam logs when 'quiet' boot is desired.
      Signed-off-by: NSekhar Nori <nsekhar@ti.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f0e82d73
  4. 30 8月, 2017 10 次提交