- 18 7月, 2008 2 次提交
-
-
由 David S. Miller 提交于
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2008 33 次提交
-
-
由 Patrick McHardy 提交于
Increase reliability by retrying to send JoinIn messages after memory allocation failures on each TRANSMIT_PDU event until it succeeds. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
in __neigh_event_send, if we have a neighbour entry which is in NUD_INCOMPLETE state, we enqueue any outbound frames to that neighbour to the neighbours arp_queue, which is default capped to a length of 3 skbs. If that queue exceeds its set length, it will drop an skb on the queue to enqueue the newly arrived skb. This results in a drop for which we have no statistics incremented. This patch adds an unresolved_discards stat to /proc/net/stat/ndisc_cache to track these lost frames. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Done with NET_XXX_STATS macros :) To be continued... Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This one is tricky. The thing is that this macro is only used when killing tw buckets, but since this killer is promiscuous wrt to which net each particular tw belongs to, I have to use it only when NET_NS is off. When the net namespaces are on, I use the INET_INC_STATS_BH for each bucket. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
These places have a tcp_sock, but we'd prefer the sock itself to get net from it. Fortunately, tcp_sk macro is just a type cast, so this replace is really cheap. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The tcp_enter_memory_pressure calls NET_INC_STATS, but doesn't have where to get the net from. I decided to add a sk argument, not the net itself, only to factor all the required sock_net(sk) calls inside the enter_memory_pressure callback itself. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Now we're done with the TCP_XXX_STATS macros. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Same as before - the sock is always there to get the net from, but there are also some places with the net already saved on the stack. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Fortunately (almost) all the TCP code has a sock to get the net from :) Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This one sets TCP MIBs after zeroing them, and thus requires the net. The existing single caller can use init_net (temporarily). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
TCP_INC_STATS_USER and TCP_ADD_STATS_BH are currently unused. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This is the same as the first patch in the set, but preparing the net for TCP_XXX_STATS - save the struct net on the stack where required and possible. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Very simple - only ip_evictor (fragments) requires such. This patch ends up the IP_XXX_STATS patching. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
All the callers already have either the net itself, or the place where to get it from. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Some places, that deal with IP statistics already have where to get a struct net from, but use it directly, without declaring a separate variable on the stack. So, save this net on the stack for future IP_XXX_STATS macros. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Currently VLAN filtering is enabled when the first VLAN is added. Obviously before that there's no point in receiving any VLAN packets. Now that we disable VLAN filtering in promiscous mode, we can keep the VLAN filters enabled the remaining time. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As discussed in this thread: http://www.mail-archive.com/netdev@vger.kernel.org/msg53976.html promiscous mode means to disable *all* filters. Currently only unicast and multicast filtering is disabled. This patch changes all Intel drivers to also disable VLAN filtering. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Will Newton 提交于
Change PULLHUP to POLLHUP in tcp_poll comments and clean up another comment for grammar and coding style. Signed-off-by: NWill Newton <will.newton@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
net/core/skbuff.c:1335:5: warning: symbol '__skb_splice_bits' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
由 Rumen G. Bogdanovski 提交于
This patch enhances the synchronization of the closing connections between the master and the backup director. It prevents the closed connections to expire with the 15 min timeout of the ESTABLISHED state on the backup and makes them expire as they would do on the master with much shorter timeouts. Signed-off-by: NRumen G. Bogdanovski <rumen@voicecho.com> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sven Wegener 提交于
So that kthread_stop() can wake up the thread and we don't have to wait one second in the worst case for the daemon to actually stop. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Sven Wegener 提交于
Instead of doing an endless loop with sleeping for one second, we now put the backup thread onto the mcast socket wait queue and it gets woken up as soon as we have data to process. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Sven Wegener 提交于
This also moves the setup code out of the daemons, so that we're able to return proper error codes to user space. The current code will return success to user space when the daemon is started with an invald mcast interface. With these changes we get an appropriate "No such device" error. We longer need our own completion to be sure the daemons are actually running, because they no longer contain code that can fail and kthread_run() takes care of the rest. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Sven Wegener 提交于
The additional information we now return to the caller is currently not used, but will be used to return errors to user space. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Sven Wegener 提交于
There's no need to do it at runtime, the values are constant. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Acked-by: NSimon Horman <horms@verge.net.au>
-
- 15 7月, 2008 5 次提交
-
-
由 Akinobu Mita 提交于
Fix memory leak in error path in CPU_UP_PREPARE notifier. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
When I removed the special "default" meaning from the QoS parameters, I forgot to update drivers and this lead to warnings because some drivers were checking for the special values and putting in defaults. This fixes that by removing the default special-casing completely. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix bluetooth hci_bcsp Kconfig to avoid build errors: drivers/built-in.o: In function `bcsp_prepare_pkt': hci_bcsp.c:(.text+0x7e9ac): undefined reference to `bitrev16' drivers/built-in.o: In function `bcsp_recv': hci_bcsp.c:(.text+0x7f276): undefined reference to `bitrev16' hci_bcsp.c:(.text+0x7f293): undefined reference to `bitrev16' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Ackey-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Octavian Purdila 提交于
- move all of the details on offsets, lengths and buffers into a single function instead of doing these operation from multiple places - use a bottom up approach: try to avoid details in the high level functions, introduce them gradually as we go deeper in the function call stack With helpful feedback from Jarek Poplawski. Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Acked-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-