Compiling the hns RoCE driver requires ARM architecture.
In order to simplify development of IB/core, support
compile test. Add the necessary includes for that too.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The initial patch for changing the stack to use RoCEv2 GIDs by default
set the CMA_PREFERRED_ROCE_GID_TYPE to an incorrect value.  Instead of
an absolute value, we needed to set the right bit in a bitmask.  Correct
the default setting so we use RoCEv2 by default.

Fixes: 63a5f483 (IB/cma: Set default gid type to RoCEv2)
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The number of supported WIDs, if they are supported at all, can be
limited due to resources. Notifying the user space application the
number of available WIDs allows it to utilize them correctly.
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Direct Packet Mode support may be disabled, e.g, due to limited
resources. Notifying the user application prevents wasting cycles
on attempting to send these kind of packets.
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Trivial fix to spelling mistake in mlx5_ib_dbg message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds qp->s_ack_queue indices and size to qp_stats printout.
This information will provide information about the receiving side.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As a final step to support RSS feature, expose the RSS capabilities in
query device verb.

It includes:
- Max rwq indirection tables.
- Max rwq indirection table size.
- Supported qp types.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to work with a RSS QP by using an indirection table object
upon QP creation. Other related QP verbs (e.g. modify/destroy/query) were
updated as well for that QP mode.

Notes:
- The RX hash properties are supplied as driver private data.
- The RSS QP port is used on the associated WQs in its indirection
  table. Applying different ports during WQ life time is not allowed.
- The expected RSS QP flow is: create, modify(RST->INIT),
  modify(RST->RTR), destroy.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To enable RSS functionality the IB indirection table object (i.e.
ib_rwq_ind_table) should be used.
This patch implements the related verbs as of create and destroy an
indirection table.

In downstream patches the indirection table will be used as part of RSS
QP creation.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support create/modify/destroy WQ related verbs.

The base IB object to enable RSS functionality is a WQ (i.e. ib_wq).
This patch implements the related WQ verbs as of create, modify and
destroy.

In downstream patches the WQ will be used as part of an indirection
table (i.e. ib_rwq_ind_table) to enable RSS QP creation.

Notes:
ConnectX-3 hardware requires consecutive WQNs list as receive descriptor
queues for the RSS QP. Hence, the driver manages consecutive ranges lists
per context which the user must respect.
Destroying the WQ does not return its WQN back to its range for
reusing. However, destroying all WQs from the same range releases the
range and in turn releases its WQNs for reusing.

Since the WQ object is not a natural object in the hardware, the driver
implements the WQ by the hardware QP.

As such, the WQ inherits its port from its RSS QP parent upon its
RST->INIT transition and by that time its state is applied to the
hardware.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding visibility of resource usage of QPs, CQs and counters used by
virtual functions. This feature will be used to give the PF administrator
more data while debugging VF status. Usage info was added to ALLOC_RES
command, to notify the PF if the resource which is being reserved or
allocated for the VF will be used by kernel driver or by user verbs.

Updated reservation and allocation functions of QP, CQ and counter with
additional usage parameter.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When inline-receive is enabled, the HCA may write received
data into the receive WQE.

Inline-receive is enabled by setting its matching bit in
the QP context and each single-packet message with payload
not exceeding the receive WQE size will be delivered to
the WQE.

The completion report will indicate that the payload was placed to the WQE.

It includes:
1) Return maximum supported size of inline-receive by the hardware
in query_device vendor's data part.
2) Enable the feature when requested by the vendor data input.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds below requester and responder side error counters,
which will be exposed by hardware counters interface and are supported
as part of query Q counters command extension.

 +---------------------------+-------------------------------------+
 |      Name                 |           Description               |
 |---------------------------+-------------------------------------|
 |resp_local_length_error    | Number of times responder detected  |
 |                           | local length errors                 |
 |---------------------------+-------------------------------------|
 |resp_cqe_error             | Number of CQEs completed with error |
 |                           | at responder                        |
 |---------------------------+-------------------------------------|
 |req_cqe_error              | Number of CQEs completed with error |
 |                           | at requester                        |
 |---------------------------+-------------------------------------|
 |req_remote_invalid_request | Number of times requester detected  |
 |                           | remote invalid request error        |
 |---------------------------+-------------------------------------|
 |req_remote_access_error    | Number of times requester detected  |
 |                           | remote access error                 |
 |---------------------------+-------------------------------------|
 |resp_remote_access_error   | Number of times responder detected  |
 |                           | remote access error                 |
 |---------------------------+-------------------------------------|
 |resp_cqe_flush_error       | Number of CQEs completed with       |
 |                           | flushed with error at responder     |
 |---------------------------+-------------------------------------|
 |req_cqe_flush_error        | Number of CQEs completed with       |
 |                           | flushed with error at requester     |
 +---------------------------+-------------------------------------+
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The extended address vector is the highest bit in be32 variable,
but it was compared with the lowest. This patch fixes the endianness
of that check and removes already declared define.

Fixes: 17d2f88f ("IB/mlx5: Add ODP atomics support")
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When we have a miss in one order of the mkey cache, we try to get
an mkey from a higher order.

We still need to check that the higher order can be used with UMR
before using it. Otherwise, we will get an mkey with 0 entries and
the post send operation that is used to fill it will complete with
the following error:

mlx5_0:dump_cqe:275:(pid 0): dump error cqe
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 0f007806 25000025 49ce59d2

Fixes: 49780d42 ("IB/mlx5: Expose MR cache for mlx5_ib")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Report RX checksum capabilities when 'ipoib_enhanced_offloads'
capabilities are set and support checksum.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Report 'ipoib_enhanced_offloads' capabilities from
the core layer, it will be used in the next patch from this series.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to add multicast flow steering support, there is need
to block the attaching of mcg flow for underlay QP, recognize
multicast IB_FLOW_SPEC_IPV4 based on its IP and enable
creating/destroying flow for IB layer.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow user space applications to accelerate send and receive
traffic which is typically handled by IPoIB ULP by creating
a UD QP with a given source QPN of the IPoIB UD QP.

UD QP with a given source QPN should basically be similar to
RAW QP from point of view of its created resources.

However,
- Its TIS should point to the source QPN.
- Modify can be done only on its state as the transport attributes
  are managed by its source QP.

This patch manages below:
- Creating/destroying/modifying UD QP with a given source QPN.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enable QP creation with a given source QP number, the created QP will
use the source QPN as its wire QP number.

To create such a QP, root privileges (i.e. CAP_NET_RAW) are required
from the user application.

This comes as a pre-patch for downstream patches in this series to
allow user space applications to accelerate traffic which is typically
handled by IPoIB ULP.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enable QP creation with a given source QP number.
The created QP will use the source QPN as its wire QP number.

This comes as a pre-patch for downstream patches in this series to
allow user space applications to accelerate traffic which is typically
handled by IPoIB ULP.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When creating address handle from multicast GID, set MAC according to
the appropriate formula instead of searching for it in the GID table:
- For IPv4 multicast GID use ip_eth_mc_map().
- For IPv6 multicast GID use ipv6_eth_mc_map().
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>

Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCE Annex (A16.9.10/11) declares that during attach (detach) QP to a
multicast group, if the QP is associated with a RoCE port, the
multicast group MLID is unused and is ignored.

During attach or detach multicast, when the QP is associated with a
port, it is enough to check the port's link layer and validate the
LID only if it is Infiniband. Otherwise, avoid validating the
multicast LID.

Fixes: 8561eae6 ("IB/core: For multicast functions, verify that LIDs are multicast LIDs")
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add debugfs interface for monitor the number of delay drop timeout
events and the number of existing dropless RQs in the system.

In addition add debugfs interface for configuring the global timeout value
which is used in the SET_DELAY_DROP command.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RQs that were configured for "delay drop" will prevent packet drops
when their WQEs are depleted.
Marking an RQ to be drop-less is done by setting delay_drop_en in RQ
context using CREATE_RQ command.

Since this feature is globally activated/deactivated by using the
SET_DELAY_DROP command on all the marked RQs, we activated/deactivated
it according to the number of RQs with 'delay_drop' enabled.

When timeout is expired, then the feature is deactivated. Therefore
the driver handles the delay drop timeout event and reactivate it.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When delay drop timeout is expired, the firmware raises
general notification event of DELAY_DROP_TIMEOUT subtype.
In addition the feature is disable so the driver have to
reactivate the timeout.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to SET_DELAY_DROP command.

This command will be used in downstream patches for delay packet drop.
The timeout value should be indicated by delay_drop_timeout field.
Packet processing will be delayed till timeout value passed or until
more WQEs are posted.

Setting this value to 0 disables the feature.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Work queue which is created with IB_WQ_FLAGS_DELAY_DROP won't
cause packet drops when there aren't receive WQEs, but will wait until
posting of receive WQEs or for some period of time that the device
was configured with.

It includes:
 * Add a new creation flag to enable delay drop functionality in a WQ.
 * A new capability was introduced - IB_RAW_PACKET_CAP_DELAY_DROP, which
   is the device's ability to delay packet drops when there aren't receive
   WQEs.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When a user sets port_guid, node_guid or policy of an IB virtual
function, save this information in "struct mlx5_vf_context".

This information will be restored later when pci_resume is called.
To make sure this works, one can use aer-inject to generate PCI
errors on mlx5 devices and verify if relevant fields are restored
after PCI resume.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds debug control parameters for congestion control which
can be read or written through debugfs. They are for reaction point and
notification point nodes.

These control parameters are as below:
 +------------------------------+-----------------------------------------+
 |      Name                    |           Description                   |
 |------------------------------+-----------------------------------------|
 |rp_clamp_tgt_rate             | When set target rate is updated to      |
 |                              | current rate                            |
 |------------------------------+-----------------------------------------|
 |rp_clamp_tgt_rate_ati         | When set update target rate based on    |
 |                              | timer as well                           |
 |------------------------------+-----------------------------------------|
 |rp_time_reset                 | time between rate increase if no        |
 |                              | CNP is received unit in usec            |
 |------------------------------+-----------------------------------------|
 |rp_byte_reset                 | Number of bytes between rate inease if  |
 |                              | no CNP is received                      |
 |------------------------------+-----------------------------------------|
 |rp_threshold                  | Threshold for reaction point rate       |
 |                              | control                                 |
 |------------------------------+-----------------------------------------|
 |rp_ai_rate                    | Rate for target rate, unit in Mbps      |
 |------------------------------+-----------------------------------------|
 |rp_hai_rate                   | Rate for hyper increase state           |
 |                              | unit in Mbps                            |
 |------------------------------+-----------------------------------------|
 |rp_min_dec_fac                | Minimum factor by which the current     |
 |                              | transmit rate can be changed when       |
 |                              | processing a CNP, unit is percerntage   |
 |------------------------------+-----------------------------------------|
 |rp_min_rate                   | Minimum value for rate limit,           |
 |                              | unit in Mbps                            |
 |------------------------------+-----------------------------------------|
 |rp_rate_to_set_on_first_cnp   | Rate that is set when first CNP is      |
 |                              | received, unit is Mbps                  |
 |------------------------------+-----------------------------------------|
 |rp_dce_tcp_g                  | Used to calculate alpha                 |
 |------------------------------+-----------------------------------------|
 |rp_dce_tcp_rtt                | Time between updates of alpha value,    |
 |                              | unit is usec                            |
 |------------------------------+-----------------------------------------|
 |rp_rate_reduce_monitor_period | Minimum time between consecutive rate   |
 |                              | reductions                              |
 |------------------------------+-----------------------------------------|
 |rp_initial_alpha_value        | Initial value of alpha                  |
 |------------------------------+-----------------------------------------|
 |rp_gd                         | When CNP is received, flow rate is      |
 |                              | reduced based on gd, rp_gd is given as  |
 |                              | log2(rp_gd)                             |
 |------------------------------+-----------------------------------------|
 |np_cnp_dscp                   | dscp code point for generated cnp       |
 |------------------------------+-----------------------------------------|
 |np_cnp_prio_mode              | 802.1p priority for generated cnp       |
 |------------------------------+-----------------------------------------|
 |np_cnp_prio                   | cnp priority mode                       |
 +------------------------------+-----------------------------------------+
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The old logic ignored link state. This led to missing IB events like
when link goes down on the switch while admin state is up or to redundant
events like when admin state goes up while link is down.
To fix that, probe the port state on NETDEV events and compare to last
known state to decide if IB events needs to be dispatched.

FIxes: 5ec8c83e ("IB/mlx5: Port events in RoCE now rely on netdev events")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Before running the ethtool's loopback selftest, we need
to make sure that the local loopback is enabled.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently, unicast/multicast loopback raw ethernet
(non-RDMA) packets are sent back to the vport.
A unicast loopback packet is the packet with destination
MAC address the same as the source MAC address.
For multicast, the destination MAC address is in the
vport's multicast filter list.

Moreover, the local loopback is not needed if
there is one or none user space context.

After this patch, the raw ethernet unicast and multicast
local loopback are disabled by default. When there is more
than one user space context, the local loopback is enabled.

Note that when local loopback is disabled, raw ethernet
packets are not looped back to the vport and are forwarded
to the next routing level (eswitch, or multihost switch,
or out to the wire depending on the configuration).
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for raw ethernet local loopback firmware command.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This  patch allows driver to post send and receive
requests on QPs which are in  error state.

Instead of flushing the QP in the context of polling
error CQEs, the QPs will be added to a flush list
maintained per CQ. QP state is moved to error.
QP is added to flush list if the user moves it
to error state using modify_qp also. After polling the HW
CQ in poll_cq routine, this flush list is traversed
and driver completes work requests on each QP in the flush
list, till the budget expires. The QP is moved out of
flush list during QP destroy or during modify_QP to RESET.

When ULPs post Work Requests while QP is in error state,
driver will store the ULP data and then increment the
QP producer s/w index, without ringing doorbell. It then
schedules a worker to invoke the CQ handler since the
interrupts wont be generated from the HW for this request.
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current implementation does not program vlan header insertion
in RoCE packet if no vlan is configured. Firmware does not add
prority when there is no vlan tag in the packet. Modify the code
to insert vlan header when PFC is enabled on the interface.
Signed-off-by: NKalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

All modules in drivers/infiniband defined and used MODULE_VERSION, which
was pointless because the kernel version describes their state more accurate
then those arbitrary numbers.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NSagi Grimbrg <sagi@grimberg.me>
Reviewed-by: NSagi Grimberg <sagi@grimbeg.me>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Acked-by: NRam Amrani <Ram.Amrani@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>