LM96163 supports unsigned upper limits for the external temperature sensor.
Add support for it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip
detection code as well as support for improved PWM resolution if the chip is
configured to use it.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

LM63 and compatibles support a temperature offset register for the external
temperature sensor. Add support for it.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch fixed the inconsistent max1111 sysfs interface as pointed
out by Jean Delvare:

    It was pointed to me that the max1111 driver doesn't implement the
    standard sysfs interface for hwmon drivers (as described in
    Documentation/hwmon/sysfs-interface). It exports files adc[0-3]_in,
    which
    aren't part of the standard interface. Presumably these should be
    renamed to in[0-3]_input. Renaming them is probably not sufficient
    though, as I see no scaling done in the driver. As the MAX1111 chip has
    a documented full scale of 2.048V, I take it that the LSB of the ADC
    has a weight of 8 mV. Exporting raw register values to user-space is
    not OK.
Reported-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

I added it by mistake. It is useless as no real hardware.
It even uses even Cypress FX2, general USB bridge chip, default IDs
that makes driver load all FX2 devices having default ID...
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a minor nicification: UBI_LAYOUT_VOLUME_TYPE and
UBI_LAYOUT_VOLUME_ALIGN are currently defined but not used -
use them.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

Currently it's possible to create a volume without a name. E.g:
ubimkvol -n 32 -s 2MiB -t static /dev/ubi0 -N ""

After that vtbl_check() will always fail because it does not permit
empty strings.

Cc: stable@kernel.org
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

A logical volume can map to just part of underlying physical volume.
In this case, it must be treated like a partition.

Based on a patch from Alasdair G Kergon.

Cc: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Linux allows executing the SG_IO ioctl on a partition or LVM volume, and
will pass the command to the underlying block device.  This is
well-known, but it is also a large security problem when (via Unix
permissions, ACLs, SELinux or a combination thereof) a program or user
needs to be granted access only to part of the disk.

This patch lets partitions forward a small set of harmless ioctls;
others are logged with printk so that we can see which ioctls are
actually sent.  In my tests only CDROM_GET_CAPABILITY actually occurred.
Of course it was being sent to a (partition on a) hard disk, so it would
have failed with ENOTTY and the patch isn't changing anything in
practice.  Still, I'm treating it specially to avoid spamming the logs.

In principle, this restriction should include programs running with
CAP_SYS_RAWIO.  If for example I let a program access /dev/sda2 and
/dev/sdb, it still should not be able to read/write outside the
boundaries of /dev/sda2 independent of the capabilities.  However, for
now programs with CAP_SYS_RAWIO will still be allowed to send the
ioctls.  Their actions will still be logged.

This patch does not affect the non-libata IDE driver.  That driver
however already tests for bd != bd->bd_contains before issuing some
ioctl; it could be restricted further to forbid these ioctls even for
programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[ Make it also print the command name when warning - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a wrapper around scsi_cmd_ioctl that takes a block device.

The function will then be enhanced to detect partition block devices
and, in that case, subject the ioctls to whitelisting.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The existing gpio_to_irq() implementation on sa1100 only translates
validly for internal GPIOs.  Since this sub-arch enables GPIOLIB
support, this results in buggy translations for non-internal GPIOs.

Get rid of the private gpio_to_irq() implementation, replacing it
with the .to_irq method in the sa1100 gpio chip instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Newer nVidia cards with Optimus do not support/use the DSM switching functions.
Instead, it require a DSM function to be called prior to bringing a device into
D3 state. No other _DSM calls are necessary before/after enabling/disabling a
device. Switching between discrete and integrated GPU is not supported by
this Optimus _DSM call, therefore return on the switching method.
Signed-off-by: NPeter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

According to the ACPI spec version 4, section 9.14.1, _DSM functions
must return a value with the first bit enabled if any DSM functions are
supported for the given UUID and revision ID. For a given function index n
to be marked supported, bit n must be enabled.
Signed-off-by: NPeter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is going to be used by other subsystems so they should select it.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

[This fixes a crash on boot if the system is plugged into an HDTV so it's
 probably appropriate to push even though it didn't make the window. We could
 be cleverer about this but the simple version seems to be the safe one]

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

At the moment we cannot allocate more than stolen memory size for framebuffers.
To get around that issues we discard modes that doesn't fit. This is a temporary
solution until we can freely allocate framebuffer memory.

[Currently the framebuffer needs to be linear in kernel space due to limits
 in the kernel fb layer - AC]
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Module parameter descriptions don't take a trailing \n, otherwise it
breaks formatting of modinfo's output. Also add missing space after
comma.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Packet2 is only one dword.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

. It was useful during development, but now on a production system
we can get this (if the user forgot to upload the firmware):

[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] Loading SUMO Microcode
r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin"
atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware!
radeon 0000:00:01.0: disabling GPU acceleration
88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary
------------[ cut here ]------------
WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]()
Hardware name: System Product Name
Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd
Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a895 #1
Call Trace:
 [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0
 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20
 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm]
 [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon]
 [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm]
 [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm]
 [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm]
 [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm]
 [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon]
 [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon]
 [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon]
 [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon]
 [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon]

The big WARN() has nothing to do with the culprit - which is that
the firmware was not loaded. So lets remove the WARN() from the TTM DMA code.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If a platform device exists on the system, but ramoops fails to attach to
it, the module parameters are overridden before ramoops can fall back and
try to use passed module parameters.  Move update to end of init routine.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Sergiu Iordache <sergiu@chromium.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The return value of rounddown_pow_of_two wasn't evaluated, so the
operation was a no-op.
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/parport/parport_pc.c: In function '__check_irq':
drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type
drivers/parport/parport_pc.c: In function '__check_dma':
drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently no udev events for memory hotplug "online" and "offline" are
generated:

  # udevadm monitor
  # echo offline > /sys/devices/system/memory/memory4/state
  ==> No event

When kdump is loaded, kexec detects the current memory configuration and
stores it in the pre-allocated ELF core header.  Therefore, for kdump it
is necessary to reload the kdump kernel with kexec when the memory
configuration changes (e.g.  for online/offline hotplug memory).

In order to do this automatically, udev rules should be used.  This kernel
patch adds udev events for "online" and "offline".  Together with this
kernel patch, the following udev rules for online/offline have to be added
to "/etc/udev/rules.d/98-kexec.rules":

  SUBSYSTEM=="memory", ACTION=="online", PROGRAM="/etc/init.d/kdump restart"
  SUBSYSTEM=="memory", ACTION=="offline", PROGRAM="/etc/init.d/kdump restart"

[sfr@canb.auug.org.au: fixups for class to subsystem conversion]
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KMSG_DUMP_KEXEC is useless because we already save kernel messages inside
/proc/vmcore, and it is unsafe to allow modules to do other stuffs in a
crash dump scenario.

[akpm@linux-foundation.org: fix powerpc build]
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Reported-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the int/bool confusion in there.

  drivers/video/nvidia/nvidia.c:1602: warning: return from incompatible pointer type

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Initialize the PPTP "seq received" value to 0xffffffff, so we don't
ignore packets with seq zero.
Signed-off-by: NBradley Peterson <despite@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when the link is 10 Mbps and the mode is RMII, it's necessary
to set FRCONT to 1 in MIIGSK_CFGR to divide the RMII source
clock by 10 in order to support 10 Mbps operations.
Signed-off-by: NEric Bénard <eric@eukrea.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Ethernet header does not account for the addition of a VLAN header.
Full size Ethernet frames containing VLAN header are not processed
because the frame is larger than the resulting hw mtu.
Signed-off-by: NDoug Kehn <rdkehn@yahoo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Similar problem as in 481a8199 ("can:
fix NOHZ local_softirq_pending 08 warning"). This fix replaces
netif_rx() with netif_rx_ni() which has to be used from
process/softirq context.
Signed-off-by: NManfred Rudigier <manfred.rudigier@omicron.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When TX time stamping for PTP messages is enabled on a socket, a time
stamp is returned on the socket error queue to the user space application
after the frame was transmitted. The transmitted frame is also returned on
the error queue so that an application knows to which frame the time stamp
belongs.

In the current implementation the TxFCB is immediately followed by the
frame. Since the eTSEC inserts the TX time stamp 8 bytes after the TxFCB,
parts of the frame have been overwritten and an invalid frame was returned
on the socket error queue.

This patch fixes the described problem by adding additional 16 padding
bytes between the TxFCB and the frame for all messages sent from a time
stamping enabled socket (other sockets are not affected).
Signed-off-by: NManfred Rudigier <manfred.rudigier@omicron.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When there is not enough headroom in the skb a private copy will be made.
However, the private copy had no reference to the socket and consequently
no time stamp could be queued on the socket error queue during the
skb_tstamp_tx function. This patch fixes this issue by also stealing the
sock reference from the original skb after making the private copy.
Signed-off-by: NManfred Rudigier <manfred.rudigier@omicron.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce function mdiobus_alloc_size() as an alternative to mdiobus_alloc().
Most callers of mdiobus_alloc() also allocate a private data structure, and
then manually point bus->priv to this object.  mdiobus_alloc_size()
combines the two operations into one, which simplifies memory management.

The original mdiobus_alloc() now just calls mdiobus_alloc_size(0).
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dan Carpenter points out that it's an int, not a bool:
intelfbdrv.c:818:	if (bailearly == 1)
intelfbdrv.c:828:	if (bailearly == 2)
intelfbdrv.c:836:	if (bailearly == 3)
intelfbdrv.c:842:	if (bailearly == 4)
intelfbdrv.c:851:	if (bailearly == 5)
intelfbdrv.c:859:	if (bailearly == 6)
intelfbdrv.c:866:				    bailearly > 6 ? bailearly - 6 : 0);
intelfbdrv.c:874:	if (bailearly == 18)
intelfbdrv.c:886:	if (bailearly == 19)
intelfbdrv.c:893:	if (bailearly == 20)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Dan Carpenter <dan.carpenter@oracle.com>

Dan Carpenter points out that it's an int, not a bool:

pcd.c:427:				if (verbose > 1)
pcd.c:433:				if (verbose > 1)
pcd.c:437:				if (verbose < 2)
pcd.c:506:#define DBMSG(msg)	((verbose>1)?(msg):NULL)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Dan Carpenter <dan.carpenter@oracle.com>

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Cut and paste bug.

Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>