- 04 11月, 2019 1 次提交
-
-
由 Trond Myklebust 提交于
NFSv4 supports 64-bit times, so we should switch to using struct timespec64 when decoding attributes. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 02 3月, 2019 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 21 2月, 2019 1 次提交
-
-
由 Trond Myklebust 提交于
Allow the caller to pass error information when cleaning up a failed I/O request so that we can conditionally take action to cancel the request altogether if the error turned out to be fatal. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 20 12月, 2018 2 次提交
-
-
由 NeilBrown 提交于
SUNRPC has two sorts of credentials, both of which appear as "struct rpc_cred". There are "generic credentials" which are supplied by clients such as NFS and passed in 'struct rpc_message' to indicate which user should be used to authorize the request, and there are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS which describe the credential to be sent over the wires. This patch replaces all the generic credentials by 'struct cred' pointers - the credential structure used throughout Linux. For machine credentials, there is a special 'struct cred *' pointer which is statically allocated and recognized where needed as having a special meaning. A look-up of a low-level cred will map this to a machine credential. Signed-off-by: NNeilBrown <neilb@suse.com> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 NeilBrown 提交于
Use the common 'struct cred' to pass credentials for readdir. Signed-off-by: NNeilBrown <neilb@suse.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 01 10月, 2018 3 次提交
-
-
由 Trond Myklebust 提交于
Now that each struct nfs_pgio_header corresponds to one RPC call, we only have one writer to the struct nfs_pgio_header. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
Save a few bytes by allowing the read/write specific fields of the structures to share storage. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
When the server fails to return post-op attributes, the client's attempt to place read data directly in the page cache fails, and so we have to do an extra copy in order to realign the data with page borders. This patch attempts to detect servers that don't return post-op attributes on read (e.g. for pNFS) and adjusts the placement calculation accordingly. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 10 8月, 2018 3 次提交
-
-
由 Olga Kornievskaia 提交于
Change xdr to always send COPY asynchronously. Keep the list copies send in a list under a server structure. Once copy is sent, it waits on a completion structure that will be signalled by the callback thread that receives CB_OFFLOAD. If CB_OFFLOAD returned an error and even if it returned partial bytes, ignore them (as we can't commit without a verifier to match) and return an error. Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Olga Kornievskaia 提交于
If server returns async reply, it must include a callback stateid, wr_callback_id in the write_response4. Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Olga Kornievskaia 提交于
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 27 7月, 2018 1 次提交
-
-
由 Trond Myklebust 提交于
Even if the results of the permissions checks failed, we should parse the results of the layout on open call so that we can return the layout if required. Note that we also want to ignore the sequence counter for whether or not a layout recall occurred. If the recall pertained to our OPEN, then the callback will know, and will attempt to wait for us to finih processing anyway. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 19 6月, 2018 1 次提交
-
-
由 Trond Myklebust 提交于
We do not want to have rpciod threads perform recursive calls into the RPC layer since that can deadlock. In particular, having to wait for a layoutget can be nasty... We want rather to defer scheduling those retries until we're in the rpc_release() callback, since that is called from the nfsiod workqueue. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 05 6月, 2018 1 次提交
-
-
由 Trond Myklebust 提交于
Allow the getattr() callback to check things like whether or not we hold a delegation so that it can adjust the attributes that it is asking for. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 01 6月, 2018 6 次提交
-
-
由 Fred Isaman 提交于
Since the LAYOUTGET on OPEN can be sent without prior inode information, existing methods to prevent LAYOUTGET from being sent while processing CB_LAYOUTRECALL don't work. Track if a recall occurred while LAYOUTGET was being sent, and if so ignore the results. Signed-off-by: NFred Isaman <fred.isaman@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <fred.isaman@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Fred Isaman 提交于
This will be needed to seperate return value of OPEN and LAYOUTGET when they are combined into a single RPC. Signed-off-by: NFred Isaman <fred.isaman@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Trond Myklebust 提交于
Ensure that we pass down the inode of the file being deleted so that we can return any delegation being held. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Anna Schumaker 提交于
Rather than doing this in the generic NFS client code. Let's put this with the other v4 stuff so it's all in one place. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Anna Schumaker 提交于
This doesn't really need to be in the generic NFS client code, and I think it makes more sense to keep the v4 code in one place. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 11 4月, 2018 4 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Ensure that when we do finally delete the file, then we return the delegation. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Move the delegation recall out of the generic code, and into the NFSv4 specific callback. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Move the delegation return out of generic code and down into the NFSv4 specific unlink code. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 02 11月, 2017 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org> Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 8月, 2017 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 02 8月, 2017 1 次提交
-
-
由 Trond Myklebust 提交于
The verifier is allocated on the stack, but the EXCHANGE_ID RPC call was changed to be asynchronous by commit 8d89bd70. If we interrrupt the call to rpc_wait_for_completion_task(), we can therefore end up transmitting random stack contents in lieu of the verifier. Fixes: 8d89bd70 ("NFS setup async exchange_id") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 14 7月, 2017 5 次提交
-
-
由 Jeff Layton 提交于
This will be needed in order to implement the get_parent export op for nfsd. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
If the page cache is being flushed, then we want to ensure that we do start a commit once the pages are done being flushed. If we just wait until all I/O is done to that file, we can end up livelocking until the balance_dirty_pages() mechanism puts its foot down and forces I/O to stop. So instead we do more or less the same thing that O_DIRECT does, and set up a counter to tell us when the flush is done, Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Remove the 'layout_private' fields that were only used by the pNFS OSD layout driver. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Benjamin Coddington 提交于
An interrupted rename will leave the old dentry behind if the rename succeeds. Fix this by forcing a lookup the next time through ->d_revalidate. A previous attempt at solving this problem took the approach to complete the work of the rename asynchronously, however that approach was wrong since it would allow the d_move() to occur after the directory's i_mutex had been dropped by the original process. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Benjamin Coddington 提交于
NFS uses some int, and unsigned int :1, and bool as flags in structs and args. Assert the preference for uniformly replacing these with the bool type. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 09 5月, 2017 1 次提交
-
-
由 Olga Kornievskaia 提交于
Instead of messing with the commit path which has been causing issues, add a COMMIT op after the COPY and ask for stable copies in the first space. It saves a round trip, since after the COPY, the client sends a COMMIT anyway. Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 21 4月, 2017 2 次提交
-
-
由 Benjamin Coddington 提交于
NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Benjamin Coddington 提交于
Let's try to have it in a cacheline in nfs4_proc_pgio_rpc_prepare(). Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 10 12月, 2016 1 次提交
-
-
由 Andreas Gruenbacher 提交于
Clients can set the umask attribute when creating files to cause the server to apply it always except when inheriting permissions from the parent directory. That way, the new files will end up with the same permissions as files created locally. See https://tools.ietf.org/html/draft-ietf-nfsv4-umask-02 for more details. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 04 12月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 03 12月, 2016 2 次提交
-
-
由 Trond Myklebust 提交于
Cleanup to allow layout drivers to attach private data to layoutreturn, and manage the data. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 02 12月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
Add XDR encoding for the layoutreturn op, and storage for the layoutreturn arguments to the DELEGRETURN compound. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-